nuttx/drivers/analog/dac7554.c
Petro Karashchenko 98ba65c422 c89: get rid of designated initializers in common code
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-28 13:39:27 +08:00

261 lines
7.8 KiB
C

/****************************************************************************
* drivers/analog/dac7554.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/arch.h>
#include <nuttx/analog/dac.h>
#include <nuttx/spi/spi.h>
/****************************************************************************
* Preprocessor definitions
****************************************************************************/
#if !defined(CONFIG_SPI)
# error SPI Support Required.
#endif
#if defined(CONFIG_DAC7554)
#ifndef CONFIG_DAC7554_SPI_FREQUENCY
# define CONFIG_DAC7554_SPI_FREQUENCY 1000000
#endif
#define DAC7554_SPI_MODE (SPIDEV_MODE2) /* SPI Mode 2: CPOL=1,CPHA=0 */
/****************************************************************************
* Private Types
****************************************************************************/
struct dac7554_dev_s
{
FAR struct spi_dev_s *spi; /* SPI interface */
int spidev; /* SPI Chip Select number */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* I2C Helpers */
/* DAC methods */
static void dac7554_reset(FAR struct dac_dev_s *dev);
static int dac7554_setup(FAR struct dac_dev_s *dev);
static void dac7554_shutdown(FAR struct dac_dev_s *dev);
static void dac7554_txint(FAR struct dac_dev_s *dev, bool enable);
static int dac7554_send(FAR struct dac_dev_s *dev,
FAR struct dac_msg_s *msg);
static int dac7554_ioctl(FAR struct dac_dev_s *dev, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct dac_ops_s g_dacops =
{
dac7554_reset, /* ao_reset */
dac7554_setup, /* ao_setup */
dac7554_shutdown, /* ao_shutdown */
dac7554_txint, /* ao_txint */
dac7554_send, /* ao_send */
dac7554_ioctl /* ao_ioctl */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: dac7554_configspi
*
* Description:
* Configure the SPI interface
*
****************************************************************************/
static inline void dac7554_configspi(FAR struct spi_dev_s *spi)
{
SPI_SETMODE(spi, DAC7554_SPI_MODE);
SPI_SETBITS(spi, 8);
SPI_HWFEATURES(spi, 0);
SPI_SETFREQUENCY(spi, CONFIG_DAC7554_SPI_FREQUENCY);
}
/****************************************************************************
* Name: dac7554_reset
*
* Description:
* Reset the DAC device. Called early to initialize the hardware. This
* is called, before ao_setup() and on error conditions.
*
****************************************************************************/
static void dac7554_reset(FAR struct dac_dev_s *dev)
{
}
/****************************************************************************
* Name: dac7554_setup
*
* Description:
* Configure the DAC. This method is called the first time that the DAC
* device is opened. This will occur when the port is first opened.
* This setup includes configuring and attaching DAC interrupts. Interrupts
* are all disabled upon return.
*
****************************************************************************/
static int dac7554_setup(FAR struct dac_dev_s *dev)
{
return OK;
}
/****************************************************************************
* Name: dac7554_shutdown
*
* Description:
* Disable the DAC. This method is called when the DAC device is closed.
* This method reverses the operation the setup method.
*
****************************************************************************/
static void dac7554_shutdown(FAR struct dac_dev_s *dev)
{
}
/****************************************************************************
* Name: dac7554_txint
*
* Description:
* Call to enable or disable TX interrupts
*
****************************************************************************/
static void dac7554_txint(FAR struct dac_dev_s *dev, bool enable)
{
}
/****************************************************************************
* Name: dac7554_send
****************************************************************************/
static int dac7554_send(FAR struct dac_dev_s *dev, FAR struct dac_msg_s *msg)
{
FAR struct dac7554_dev_s *priv = (FAR struct dac7554_dev_s *)dev->ad_priv;
uint16_t data;
/* Sanity check */
DEBUGASSERT(priv->spi != NULL);
/* Set up message to send */
ainfo("value: %08x\n", msg->am_data);
SPI_LOCK(priv->spi, true);
dac7554_configspi(priv->spi);
data = ((msg->am_data >> 16) & 0x0fff) | ((msg->am_channel & 0x03) << 12) |
(1 << 15);
SPI_SELECT(priv->spi, priv->spidev, true);
SPI_SEND(priv->spi, (data >> 8));
SPI_SEND(priv->spi, (data & 0xff));
SPI_SELECT(priv->spi, priv->spidev, false);
SPI_LOCK(priv->spi, false);
dac_txdone(dev);
return 0;
}
/****************************************************************************
* Name: dac7554_ioctl
****************************************************************************/
static int dac7554_ioctl(FAR struct dac_dev_s *dev, int cmd,
unsigned long arg)
{
return -ENOTTY;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: dac7554_initialize
*
* Description:
* Initialize DAC
*
* Input Parameters:
* Port number (for hardware that has multiple DAC interfaces)
*
* Returned Value:
* Valid DAC7554 device structure reference on success; a NULL on failure
*
****************************************************************************/
FAR struct dac_dev_s *dac7554_initialize(FAR struct spi_dev_s *spi,
int spidev)
{
FAR struct dac7554_dev_s *priv;
FAR struct dac_dev_s *g_dacdev;
/* Sanity check */
DEBUGASSERT(spi != NULL);
/* Initialize the DAC7554 device structure */
priv =
(FAR struct dac7554_dev_s *)kmm_malloc(sizeof(struct dac7554_dev_s));
priv->spi = spi;
priv->spidev = spidev;
g_dacdev = (FAR struct dac_dev_s *)kmm_malloc(sizeof(struct dac_dev_s));
g_dacdev->ad_ops = &g_dacops;
g_dacdev->ad_priv = priv;
return g_dacdev;
}
#endif /* CONFIG_DAC7554 */