1dc41e329b
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4599 42af7a65-404d-4744-a932-0658087f49c3
176 lines
4.1 KiB
Plaintext
176 lines
4.1 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see misc/tools/kconfig-language.txt.
|
|
#
|
|
config LCD_MAXCONTRAST
|
|
int "LCD maximum contrast"
|
|
default 63 if NOKIA6100_S1D15G10
|
|
default 127 if NOKIA6100_PCF8833
|
|
default 255 if LCD_P14201
|
|
default 63
|
|
---help---
|
|
must be 63 with the Epson controller and 127 with
|
|
the Phillips controller.
|
|
|
|
config LCD_MAXPOWER
|
|
int "LCD maximum power"
|
|
default 1
|
|
---help---
|
|
Maximum value of backlight setting. The backlight
|
|
control is managed outside of the 6100 driver so this value has no
|
|
meaning to the driver. Board-specific logic may place restrictions on
|
|
this value.
|
|
|
|
config LCD_P14201
|
|
bool "Rit P1402 series display"
|
|
default n
|
|
---help---
|
|
p14201.c. Driver for RiT P14201 series display with SD1329 IC
|
|
controller. This OLED is used with older versions of the
|
|
TI/Luminary LM3S8962 Evaluation Kit.
|
|
if LCD_P14201
|
|
config P14201_NINTERFACES
|
|
int "Number of physical P14201 devices"
|
|
default 1
|
|
range 1,1
|
|
---help---
|
|
Specifies the number of physical P14201
|
|
devices that will be supported.
|
|
|
|
config P14201_SPIMODE
|
|
int "SPI mode"
|
|
default 2
|
|
range 0,3
|
|
---help---
|
|
Controls the SPI mode
|
|
|
|
config P14201_FREQUENCY
|
|
int "SPI frequency"
|
|
default 1000000
|
|
---help---
|
|
Define to use a different bus frequency,FIXME DEFAULT VALUE OK?
|
|
|
|
config P14201_FRAMEBUFFER
|
|
bool "Enable P14201 GDDRAM cache"
|
|
default y
|
|
---help---
|
|
If defined, accesses will be performed
|
|
using an in-memory copy of the OLEDs GDDRAM. This cost of this
|
|
buffer is 128 * 96 / 2 = 6Kb. If this is defined, then the driver
|
|
will be fully functional. If not, then it will have the following
|
|
limitations:
|
|
|
|
Reading graphics memory cannot be supported, and
|
|
|
|
All pixel writes must be aligned to byte boundaries.
|
|
The latter limitation effectively reduces the 128x96 disply to 64x96.
|
|
endif
|
|
|
|
config LCD_NOKIA6100
|
|
bool "Nokia 6100 display support"
|
|
default n
|
|
---help---
|
|
nokia6100.c. Supports the Nokia 6100 display with either the Philips
|
|
PCF883 or the Epson S1D15G10 display controller. This LCD is used
|
|
with the Olimex LPC1766-STK (but has not been fully integrated).
|
|
if LCD_NOKIA6100
|
|
config NOKIA6100_NINTERFACES
|
|
int "Number of physical NOKIA6100 devices"
|
|
default 1
|
|
range 1,1
|
|
---help---
|
|
Specifies the number of physical Nokia
|
|
6100 devices that will be supported.
|
|
|
|
choice NOKIA6100_CONTROLLER
|
|
prompt "Controller Setup"
|
|
default NOKIA6100_S1D15G10
|
|
config NOKIA6100_S1D15G10
|
|
bool "S1D15G10 controller"
|
|
---help---
|
|
Selects the Epson S1D15G10 display controller
|
|
|
|
config NOKIA6100_PCF8833
|
|
bool "PCF8833 controller"
|
|
---help---
|
|
Selects the Phillips PCF8833 display controller
|
|
endchoice
|
|
|
|
config NOKIA6100_SPIMODE
|
|
int "SPI mode"
|
|
default 0
|
|
range 0,3
|
|
---help---
|
|
Controls the SPI mode
|
|
|
|
config NOKIA6100_FREQUENCY
|
|
int "SPI frequency"
|
|
default 1000000
|
|
---help---
|
|
Define to use a different bus frequency
|
|
|
|
config NOKIA6100_BLINIT
|
|
bool "Back light initial"
|
|
default n
|
|
---help---
|
|
Initial backlight setting
|
|
The following may need to be tuned for your hardware:
|
|
|
|
config NOKIA6100_BPP
|
|
int "Display bits per pixel"
|
|
default 8
|
|
---help---
|
|
Device supports 8, 12, and 16 bits per pixel.
|
|
|
|
config NOKIA6100_INVERT
|
|
int "Display inversion"
|
|
default 1
|
|
range 0,1
|
|
---help---
|
|
Display inversion, 0 or 1, Default: 1
|
|
|
|
config NOKIA6100_MY
|
|
int "Display row direction"
|
|
default 0
|
|
range 0,1
|
|
---help---
|
|
Display row direction, 0 or 1, Default: 0
|
|
|
|
config NOKIA6100_MX
|
|
int "Display column direction"
|
|
default 1
|
|
range 0,1
|
|
---help---
|
|
Display column direction, 0 or 1, Default: 1
|
|
|
|
config NOKIA6100_V
|
|
int "Display address direction"
|
|
default 0
|
|
range 0,1
|
|
---help---
|
|
Display address direction, 0 or 1, Default: 0
|
|
|
|
config NOKIA6100_ML
|
|
int "Display scan direction"
|
|
default 0
|
|
range 0,1
|
|
---help---
|
|
Display scan direction, 0 or 1, Default: 0
|
|
|
|
config NOKIA6100_RGBORD
|
|
int "Display RGB order"
|
|
default 0
|
|
range 0,1
|
|
---help---
|
|
Display RGB order, 0 or 1, Default: 0
|
|
Required LCD driver settings:
|
|
endif
|
|
|
|
config LCD_UG9664HSWAG01
|
|
bool "9664HSWAG01 OLED Display Module"
|
|
default n
|
|
---help---
|
|
ug-9664hswag01.c. OLED Display Module, UG-9664HSWAG01", Univision
|
|
Technology Inc. Used with the LPC Xpresso and Embedded Artists
|
|
base board.
|