sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
39016f6d68
nuttx/arch/risc-v/include/rv32im/irq.h
Abdelatif Guettouche 0f2b774dec arch/risc-v: Remove unused and undefined file section "Public Variables" 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-01-27 18:40:10 -08:00

464 lines
15 KiB
C
Raw Blame History

/****************************************************************************
* arch/risc-v/include/rv32im/irq.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* This file should never be included directly but, rather, only indirectly
* through nuttx/irq.h
*/
#ifndef __ARCH_RISCV_INCLUDE_RV32IM_IRQ_H
#define __ARCH_RISCV_INCLUDE_RV32IM_IRQ_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <arch/types.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* How many nested system calls should we support? */
#ifndef CONFIG_SYS_NNEST
# define CONFIG_SYS_NNEST 2
#endif
/* Processor PC */
#define REG_EPC_NDX 0
/* General pupose registers */
/* $0: Zero register does not need to be saved
* $1: ra (return address)
*/
#define REG_X1_NDX 1
/* $2: Stack POinter
* $3: Global Pointer
* $4: Thread Pointer
*/
#define REG_X2_NDX 2
#define REG_X3_NDX 3
#define REG_X4_NDX 4
/* $5-$7 = t0-t3: Temporary registers */
#define REG_X5_NDX 5
#define REG_X6_NDX 6
#define REG_X7_NDX 7
/* $8: s0 / fp Frame pointer */
#define REG_X8_NDX 8
/* $89 s1 Saved register */
#define REG_X9_NDX 9
/* $10-$17 = a0-a7: Argument registers */
#define REG_X10_NDX 10
#define REG_X11_NDX 11
#define REG_X12_NDX 12
#define REG_X13_NDX 13
#define REG_X14_NDX 14
#define REG_X15_NDX 15
#define REG_X16_NDX 16
#define REG_X17_NDX 17
/* $18-$27 = s2-s11: Saved registers */
#define REG_X18_NDX 18
#define REG_X19_NDX 19
#define REG_X20_NDX 20
#define REG_X21_NDX 21
#define REG_X22_NDX 22
#define REG_X23_NDX 23
#define REG_X24_NDX 24
#define REG_X25_NDX 25
#define REG_X26_NDX 26
#define REG_X27_NDX 27
/* $28-31 = t3-t6: Temporary (Volatile) registers */
#define REG_X28_NDX 28
#define REG_X29_NDX 29
#define REG_X30_NDX 30
#define REG_X31_NDX 31
/* Interrupt Context register */
#define REG_INT_CTX_NDX 32
#ifdef CONFIG_ARCH_CHIP_GAP8
/* 31 registers, ePC, plus 6 loop registers */
# define INT_XCPT_REGS (32 + 6)
#else
# define INT_XCPT_REGS 33
#endif
#define INT_XCPT_SIZE (4 * INT_XCPT_REGS)
#ifdef CONFIG_ARCH_FPU
#if defined(CONFIG_ARCH_DPFPU)
# define FPU_REG_SIZE 2
#elif defined(CONFIG_ARCH_QPFPU)
# define FPU_REG_SIZE 4
#else
# define FPU_REG_SIZE 1
#endif
# define REG_F0_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 0)
# define REG_F1_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 1)
# define REG_F2_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 2)
# define REG_F3_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 3)
# define REG_F4_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 4)
# define REG_F5_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 5)
# define REG_F6_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 6)
# define REG_F7_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 7)
# define REG_F8_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 8)
# define REG_F9_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 9)
# define REG_F10_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 10)
# define REG_F11_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 11)
# define REG_F12_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 12)
# define REG_F13_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 13)
# define REG_F14_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 14)
# define REG_F15_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 15)
# define REG_F16_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 16)
# define REG_F17_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 17)
# define REG_F18_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 18)
# define REG_F19_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 19)
# define REG_F20_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 20)
# define REG_F21_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 21)
# define REG_F22_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 22)
# define REG_F23_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 23)
# define REG_F24_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 24)
# define REG_F25_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 25)
# define REG_F26_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 26)
# define REG_F27_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 27)
# define REG_F28_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 28)
# define REG_F29_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 29)
# define REG_F30_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 30)
# define REG_F31_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 31)
# define REG_FCSR_NDX (INT_XCPT_REGS + FPU_REG_SIZE * 32)
# define FPU_XCPT_REGS (FPU_REG_SIZE * 33)
#else
# define FPU_XCPT_REGS 0
#endif
#define XCPTCONTEXT_REGS (INT_XCPT_REGS + FPU_XCPT_REGS)
#define XCPTCONTEXT_SIZE (4 * XCPTCONTEXT_REGS)
/* In assembly language, values have to be referenced as byte address
* offsets. But in C, it is more convenient to reference registers as
* register save table offsets.
*/
#ifdef __ASSEMBLY__
# define REG_EPC (4*REG_EPC_NDX)
# define REG_X1 (4*REG_X1_NDX)
# define REG_X2 (4*REG_X2_NDX)
# define REG_X3 (4*REG_X3_NDX)
# define REG_X4 (4*REG_X4_NDX)
# define REG_X5 (4*REG_X5_NDX)
# define REG_X6 (4*REG_X6_NDX)
# define REG_X7 (4*REG_X7_NDX)
# define REG_X8 (4*REG_X8_NDX)
# define REG_X9 (4*REG_X9_NDX)
# define REG_X10 (4*REG_X10_NDX)
# define REG_X11 (4*REG_X11_NDX)
# define REG_X12 (4*REG_X12_NDX)
# define REG_X13 (4*REG_X13_NDX)
# define REG_X14 (4*REG_X14_NDX)
# define REG_X15 (4*REG_X15_NDX)
# define REG_X16 (4*REG_X16_NDX)
# define REG_X17 (4*REG_X17_NDX)
# define REG_X18 (4*REG_X18_NDX)
# define REG_X19 (4*REG_X19_NDX)
# define REG_X20 (4*REG_X20_NDX)
# define REG_X21 (4*REG_X21_NDX)
# define REG_X22 (4*REG_X22_NDX)
# define REG_X23 (4*REG_X23_NDX)
# define REG_X24 (4*REG_X24_NDX)
# define REG_X25 (4*REG_X25_NDX)
# define REG_X26 (4*REG_X26_NDX)
# define REG_X27 (4*REG_X27_NDX)
# define REG_X28 (4*REG_X28_NDX)
# define REG_X29 (4*REG_X29_NDX)
# define REG_X30 (4*REG_X30_NDX)
# define REG_X31 (4*REG_X31_NDX)
# define REG_INT_CTX (4*REG_INT_CTX_NDX)
#ifdef CONFIG_ARCH_FPU
# define REG_F0 (4*REG_F0_NDX)
# define REG_F1 (4*REG_F1_NDX)
# define REG_F2 (4*REG_F2_NDX)
# define REG_F3 (4*REG_F3_NDX)
# define REG_F4 (4*REG_F4_NDX)
# define REG_F5 (4*REG_F5_NDX)
# define REG_F6 (4*REG_F6_NDX)
# define REG_F7 (4*REG_F7_NDX)
# define REG_F8 (4*REG_F8_NDX)
# define REG_F9 (4*REG_F9_NDX)
# define REG_F10 (4*REG_F10_NDX)
# define REG_F11 (4*REG_F11_NDX)
# define REG_F12 (4*REG_F12_NDX)
# define REG_F13 (4*REG_F13_NDX)
# define REG_F14 (4*REG_F14_NDX)
# define REG_F15 (4*REG_F15_NDX)
# define REG_F16 (4*REG_F16_NDX)
# define REG_F17 (4*REG_F17_NDX)
# define REG_F18 (4*REG_F18_NDX)
# define REG_F19 (4*REG_F19_NDX)
# define REG_F20 (4*REG_F20_NDX)
# define REG_F21 (4*REG_F21_NDX)
# define REG_F22 (4*REG_F22_NDX)
# define REG_F23 (4*REG_F23_NDX)
# define REG_F24 (4*REG_F24_NDX)
# define REG_F25 (4*REG_F25_NDX)
# define REG_F26 (4*REG_F26_NDX)
# define REG_F27 (4*REG_F27_NDX)
# define REG_F28 (4*REG_F28_NDX)
# define REG_F29 (4*REG_F29_NDX)
# define REG_F30 (4*REG_F30_NDX)
# define REG_F31 (4*REG_F31_NDX)
# define REG_FCSR (4*REG_FCSR_NDX)
#endif
#else
# define REG_EPC REG_EPC_NDX
# define REG_X1 REG_X1_NDX
# define REG_X2 REG_X2_NDX
# define REG_X3 REG_X3_NDX
# define REG_X4 REG_X4_NDX
# define REG_X5 REG_X5_NDX
# define REG_X6 REG_X6_NDX
# define REG_X7 REG_X7_NDX
# define REG_X8 REG_X8_NDX
# define REG_X9 REG_X9_NDX
# define REG_X10 REG_X10_NDX
# define REG_X11 REG_X11_NDX
# define REG_X12 REG_X12_NDX
# define REG_X13 REG_X13_NDX
# define REG_X14 REG_X14_NDX
# define REG_X15 REG_X15_NDX
# define REG_X16 REG_X16_NDX
# define REG_X17 REG_X17_NDX
# define REG_X18 REG_X18_NDX
# define REG_X19 REG_X19_NDX
# define REG_X20 REG_X20_NDX
# define REG_X21 REG_X21_NDX
# define REG_X22 REG_X22_NDX
# define REG_X23 REG_X23_NDX
# define REG_X24 REG_X24_NDX
# define REG_X25 REG_X25_NDX
# define REG_X26 REG_X26_NDX
# define REG_X27 REG_X27_NDX
# define REG_X28 REG_X28_NDX
# define REG_X29 REG_X29_NDX
# define REG_X30 REG_X30_NDX
# define REG_X31 REG_X31_NDX
# define REG_INT_CTX REG_INT_CTX_NDX
#ifdef CONFIG_ARCH_FPU
# define REG_F0 REG_F0_NDX
# define REG_F1 REG_F1_NDX
# define REG_F2 REG_F2_NDX
# define REG_F3 REG_F3_NDX
# define REG_F4 REG_F4_NDX
# define REG_F5 REG_F5_NDX
# define REG_F6 REG_F6_NDX
# define REG_F7 REG_F7_NDX
# define REG_F8 REG_F8_NDX
# define REG_F9 REG_F9_NDX
# define REG_F10 REG_F10_NDX
# define REG_F11 REG_F11_NDX
# define REG_F12 REG_F12_NDX
# define REG_F13 REG_F13_NDX
# define REG_F14 REG_F14_NDX
# define REG_F15 REG_F15_NDX
# define REG_F16 REG_F16_NDX
# define REG_F17 REG_F17_NDX
# define REG_F18 REG_F18_NDX
# define REG_F19 REG_F19_NDX
# define REG_F20 REG_F20_NDX
# define REG_F21 REG_F21_NDX
# define REG_F22 REG_F22_NDX
# define REG_F23 REG_F23_NDX
# define REG_F24 REG_F24_NDX
# define REG_F25 REG_F25_NDX
# define REG_F26 REG_F26_NDX
# define REG_F27 REG_F27_NDX
# define REG_F28 REG_F28_NDX
# define REG_F29 REG_F29_NDX
# define REG_F30 REG_F30_NDX
# define REG_F31 REG_F31_NDX
# define REG_FCSR REG_FCSR_NDX
#endif
#endif
/* Now define more user friendly alternative name that can be used either
* in assembly or C contexts.
*/
/* $1 = ra: Return address */
#define REG_RA REG_X1
/* $2 = sp: The value of the stack pointer on return from the exception */
#define REG_SP REG_X2
/* $3 = gp: Only needs to be saved under conditions where there are
* multiple, per-thread values for the GP.
*/
#define REG_GP REG_X3
/* $4 = tp: Thread Pointer */
#define REG_TP REG_X4
/* $5-$7 = t0-t2: Caller saved temporary registers */
#define REG_T0 REG_X5
#define REG_T1 REG_X6
#define REG_T2 REG_X7
/* $8 = either s0 or fp: Depends if a frame pointer is used or not */
#define REG_S0 REG_X8
#define REG_FP REG_X8
/* $9 = s1: Caller saved register */
#define REG_S1 REG_X9
/* $10-$17 = a0-a7: Argument registers */
#define REG_A0 REG_X10
#define REG_A1 REG_X11
#define REG_A2 REG_X12
#define REG_A3 REG_X13
#define REG_A4 REG_X14
#define REG_A5 REG_X15
#define REG_A6 REG_X16
#define REG_A7 REG_X17
/* $18-$27 = s2-s11: Callee saved registers */
#define REG_S2 REG_X18
#define REG_S3 REG_X19
#define REG_S4 REG_X20
#define REG_S5 REG_X21
#define REG_S6 REG_X22
#define REG_S7 REG_X23
#define REG_S8 REG_X24
#define REG_S9 REG_X25
#define REG_S10 REG_X26
#define REG_S11 REG_X27
/* $28-$31 = t3-t6: Caller saved temporary registers */
#define REG_T3 REG_X28
#define REG_T4 REG_X29
#define REG_T5 REG_X30
#define REG_T6 REG_X31
/****************************************************************************
* Public Types
****************************************************************************/
#ifndef __ASSEMBLY__
/* This structure represents the return state from a system call */
#ifdef CONFIG_BUILD_KERNEL
struct xcpt_syscall_s
{
uint32_t sysreturn; /* The return PC */
};
#endif
/* The following structure is included in the TCB and defines the complete
* state of the thread.
*/
struct xcptcontext
{
/* The following function pointer is non-NULL if there are pending signals
* to be processed.
*/
void *sigdeliver; /* Actual type is sig_deliver_t */
/* These additional register save locations are used to implement the
* signal delivery trampoline.
*
* REVISIT: Because there is only one copy of these save areas,
* only a single signal handler can be active. This precludes
* queuing of signal actions. As a result, signals received while
* another signal handler is executing will be ignored!
*/
uint32_t saved_epc; /* Trampoline PC */
uint32_t saved_int_ctx; /* Interrupt context with interrupts disabled. */
#ifdef CONFIG_BUILD_KERNEL
/* This is the saved address to use when returning from a user-space
* signal handler.
*/
uint32_t sigreturn;
#endif
#ifdef CONFIG_BUILD_KERNEL
/* The following array holds information needed to return from each nested
* system call.
*/
uint8_t nsyscalls;
struct xcpt_syscall_s syscall[CONFIG_SYS_NNEST];
#endif
/* Register save area */
uint32_t regs[XCPTCONTEXT_REGS];
};
#endif /* __ASSEMBLY__ */
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#endif /* __ARCH_RISCV_INCLUDE_RV32IM_IRQ_H */
Reference in New Issue View Git Blame Copy Permalink