nuttx/sched/mqueue/mq_timedsend.c

/****************************************************************************
 * sched/mqueue/mq_timedsend.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <unistd.h>
#include <mqueue.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>

#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/wdog.h>
#include <nuttx/cancelpt.h>

#include "clock/clock.h"
#include "sched/sched.h"
#include "mqueue/mqueue.h"

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nxmq_sndtimeout
 *
 * Description:
 *   This function is called if the timeout elapses before the message queue
 *   becomes non-full.
 *
 * Input Parameters:
 *   pid   - the task ID of the task to wakeup
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static void nxmq_sndtimeout(wdparm_t pid)
{
  FAR struct tcb_s *wtcb;
  irqstate_t flags;

  /* Disable interrupts.  This is necessary because an interrupt handler may
   * attempt to send a message while we are doing this.
   */

  flags = enter_critical_section();

  /* Get the TCB associated with this pid.  It is possible that task may no
   * longer be active when this watchdog goes off.
   */

  wtcb = nxsched_get_tcb(pid);

  /* It is also possible that an interrupt/context switch beat us to the
   * punch and already changed the task's state.
   */

  if (wtcb != NULL && wtcb->task_state == TSTATE_WAIT_MQNOTFULL)
    {
      /* Restart with task with a timeout error */

      nxmq_wait_irq(wtcb, ETIMEDOUT);
    }

  /* Interrupts may now be re-enabled. */

  leave_critical_section(flags);
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: file_mq_timedsend
 *
 * Description:
 *   This function adds the specified message (msg) to the message queue
 *   (mq).  file_mq_timedsend() behaves just like mq_send(), except that if
 *   the queue is full and the O_NONBLOCK flag is not enabled for the
 *   message queue description, then abstime points to a structure which
 *   specifies a ceiling on the time for which the call will block.
 *
 *   file_mq_timedsend() is functionally equivalent to mq_timedsend() except
 *   that:
 *
 *   - It is not a cancellation point, and
 *   - It does not modify the errno value.
 *
 *  See comments with mq_timedsend() for a more complete description of the
 *  behavior of this function
 *
 * Input Parameters:
 *   mq      - Message queue descriptor
 *   msg     - Message to send
 *   msglen  - The length of the message in bytes
 *   prio    - The priority of the message
 *   abstime - the absolute time to wait until a timeout is decleared
 *
 * Returned Value:
 *   This is an internal OS interface and should not be used by applications.
 *   It follows the NuttX internal error return policy:  Zero (OK) is
 *   returned on success.  A negated errno value is returned on failure.
 *   (see mq_timedsend() for the list list valid return values).
 *
 *   EAGAIN   The queue was empty, and the O_NONBLOCK flag was set for the
 *            message queue description referred to by mq.
 *   EINVAL   Either msg or mq is NULL or the value of prio is invalid.
 *   EBADF    Message queue opened not opened for writing.
 *   EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
 *            message queue.
 *   EINTR    The call was interrupted by a signal handler.
 *
 ****************************************************************************/

int file_mq_timedsend(FAR struct file *mq, FAR const char *msg,
                      size_t msglen, unsigned int prio,
                      FAR const struct timespec *abstime)
{
  FAR struct tcb_s *rtcb = this_task();
  FAR struct mqueue_inode_s *msgq;
  FAR struct mqueue_msg_s *mqmsg;
  irqstate_t flags;
  sclock_t ticks;
  int ret;

  DEBUGASSERT(up_interrupt_context() == false);

  /* Verify the input parameters on any failures to verify. */

  ret = nxmq_verify_send(mq, msg, msglen, prio);
  if (ret < 0)
    {
      return ret;
    }

  msgq = mq->f_inode->i_private;

  /* Disable interruption */

  flags = enter_critical_section();

  /* Pre-allocate a message structure */

  mqmsg = nxmq_alloc_msg();
  if (mqmsg == NULL)
    {
      /* Failed to allocate the message. nxmq_alloc_msg() does not set the
       * errno value.
       */

      ret = -ENOMEM;
      goto errout_in_critical_section;
    }

  /* OpenGroup.org: "Under no circumstance shall the operation fail with a
   * timeout if there is sufficient room in the queue to add the message
   * immediately. The validity of the abstime parameter need not be checked
   * when there is sufficient room in the queue."
   *
   * Also ignore the time value if for some crazy reason we were called from
   * an interrupt handler.  This probably really should be an assertion.
   *
   * NOTE: There is a race condition here: What if a message is added by
   * interrupt related logic so that queue again becomes non-empty.  That
   * is handled because nxmq_do_send() will permit the maxmsgs limit to be
   * exceeded in that case.
   */

  if (msgq->nmsgs < msgq->maxmsgs || up_interrupt_context())
    {
      /* Do the send with no further checks (possibly exceeding maxmsgs)
       * Currently nxmq_do_send() always returns OK.
       */

      goto out_send_message;
    }

  /* The message queue is full... We are going to wait.  Now we must have a
   * valid time value.
   */

  if (!abstime || abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000)
    {
      ret = -EINVAL;
      nxmq_free_msg(mqmsg);
      goto errout_in_critical_section;
    }

  /* We are not in an interrupt handler and the message queue is full.
   * Set up a timed wait for the message queue to become non-full.
   *
   * Convert the timespec to clock ticks.  We must have interrupts
   * disabled here so that this time stays valid until the wait begins.
   */

  ret = clock_abstime2ticks(CLOCK_REALTIME, abstime, &ticks);

  /* If the time has already expired and the message queue is empty,
   * return immediately.
   */

  if (ret == OK && ticks <= 0)
    {
      ret = ETIMEDOUT;
    }

  /* Handle any time-related errors */

  if (ret != OK)
    {
      ret = -ret;
      nxmq_free_msg(mqmsg);
      goto errout_in_critical_section;
    }

  /* Start the watchdog and begin the wait for MQ not full */

  wd_start(&rtcb->waitdog, ticks, nxmq_sndtimeout, nxsched_gettid());

  /* And wait for the message queue to be non-empty */

  ret = nxmq_wait_send(msgq, mq->f_oflags);

  /* This may return with an error and errno set to either EINTR
   * or ETIMEDOUT.  Cancel the watchdog timer in any event.
   */

  wd_cancel(&rtcb->waitdog);

  /* Check if nxmq_wait_send() failed */

  if (ret == OK)
    {
      /* If any of the above failed, set the errno.  Otherwise, there should
       * be space for another message in the message queue.  NOW we can
       * allocate the message structure.
       *
       * Currently nxmq_do_send() always returns OK.
       */

out_send_message:
      ret = nxmq_do_send(msgq, mqmsg, msg, msglen, prio);
    }

  /* Exit here with (1) the scheduler locked, (2) a message allocated, (3) a
   * wdog allocated, and (4) interrupts disabled.
   */

errout_in_critical_section:
  leave_critical_section(flags);

  return ret;
}

/****************************************************************************
 * Name: nxmq_timedsend
 *
 * Description:
 *   This function adds the specified message (msg) to the message queue
 *   (mqdes).  nxmq_timedsend() behaves just like mq_send(), except
 *   that if the queue is full and the O_NONBLOCK flag is not enabled for
 *   the message queue description, then abstime points to a structure which
 *   specifies a ceiling on the time for which the call will block.
 *
 *   nxmq_timedsend() is functionally equivalent to mq_timedsend() except
 *   that:
 *
 *   - It is not a cancellation point, and
 *   - It does not modify the errno value.
 *
 *  See comments with mq_timedsend() for a more complete description of the
 *  behavior of this function
 *
 * Input Parameters:
 *   mqdes   - Message queue descriptor
 *   msg     - Message to send
 *   msglen  - The length of the message in bytes
 *   prio    - The priority of the message
 *   abstime - the absolute time to wait until a timeout is decleared
 *
 * Returned Value:
 *   This is an internal OS interface and should not be used by applications.
 *   It follows the NuttX internal error return policy:  Zero (OK) is
 *   returned on success.  A negated errno value is returned on failure.
 *   (see mq_timedsend() for the list list valid return values).
 *
 *   EAGAIN   The queue was empty, and the O_NONBLOCK flag was set for the
 *            message queue description referred to by mqdes.
 *   EINVAL   Either msg or mqdes is NULL or the value of prio is invalid.
 *   EBADF    Message queue opened not opened for writing.
 *   EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
 *            message queue.
 *   EINTR    The call was interrupted by a signal handler.
 *
 ****************************************************************************/

int nxmq_timedsend(mqd_t mqdes, FAR const char *msg, size_t msglen,
                   unsigned int prio, FAR const struct timespec *abstime)
{
  FAR struct file *filep;
  int ret;

  ret = fs_getfilep(mqdes, &filep);
  if (ret < 0)
    {
      return ret;
    }

  return file_mq_timedsend(filep, msg, msglen, prio, abstime);
}

/****************************************************************************
 * Name: mq_timedsend
 *
 * Description:
 *   This function adds the specified message (msg) to the message queue
 *   (mqdes).  The "msglen" parameter specifies the length of the message
 *   in bytes pointed to by "msg."  This length must not exceed the maximum
 *   message length from the mq_getattr().
 *
 *   If the message queue is not full, mq_timedsend() place the message in
 *   the message queue at the position indicated by the "prio" argrument.
 *   Messages with higher priority will be inserted before lower priority
 *   messages.  The value of "prio" must not exceed MQ_PRIO_MAX.
 *
 *   If the specified message queue is full and O_NONBLOCK is not set in the
 *   message queue, then mq_timedsend() will block until space becomes
 *   available to the queue the message or a timeout occurs.
 *
 *   mq_timedsend() behaves just like mq_send(), except that if the queue
 *   is full and the O_NONBLOCK flag is not enabled for the message queue
 *   description, then abstime points to a structure which specifies a
 *   ceiling on the time for which the call will block.  This ceiling is an
 *   absolute timeout in seconds and nanoseconds since the Epoch (midnight
 *   on the morning of 1 January 1970).
 *
 *   If the message queue is full, and the timeout has already expired by
 *   the time of the call, mq_timedsend() returns immediately.
 *
 * Input Parameters:
 *   mqdes   - Message queue descriptor
 *   msg     - Message to send
 *   msglen  - The length of the message in bytes
 *   prio    - The priority of the message
 *   abstime - the absolute time to wait until a timeout is decleared
 *
 * Returned Value:
 *   On success, mq_send() returns 0 (OK); on error, -1 (ERROR)
 *   is returned, with errno set to indicate the error:
 *
 *   EAGAIN   The queue was full, and the O_NONBLOCK flag was set for the
 *            message queue description referred to by mqdes.
 *   EINVAL   Either msg or mqdes is NULL or the value of prio is invalid.
 *   EBADF    Message queue opened not opened for writing.
 *   EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
 *            message queue.
 *   EINTR    The call was interrupted by a signal handler.
 *
 * Assumptions/restrictions:
 *
 ****************************************************************************/

int mq_timedsend(mqd_t mqdes, FAR const char *msg, size_t msglen,
                 unsigned int prio, FAR const struct timespec *abstime)
{
  int ret;

  /* mq_timedsend() is a cancellation point */

  enter_cancellation_point();

  /* Let nxmq_send() do all of the work */

  ret = nxmq_timedsend(mqdes, msg, msglen, prio, abstime);
  if (ret < 0)
    {
      set_errno(-ret);
      ret = ERROR;
    }

  leave_cancellation_point();
  return ret;
}