nuttx/boards/arm/stm32/olimex-stm32-h405
Alin Jerpelea b8175f2841 boards: nxstyle fixes
nxstyle fixes to pass CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-20 19:22:58 -07:00
..
configs/usbnsh fs: delete NFILE_DESCRIPTORS for allocating dynamically 2021-03-17 06:46:42 -07:00
include boards: nxstyle fixes 2021-03-20 19:22:58 -07:00
scripts board: stm32: Author Gregory Nutt: update licenses to Apache 2021-03-20 19:22:58 -07:00
src boards: nxstyle fixes 2021-03-20 19:22:58 -07:00
Kconfig
README.txt

README
======

The NuttX configuration for the Olimex STM32-H405 is based on the configuration
Olimex STM32-P207.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.

The following peripherals are enabled in this configuration.
 - LED:        Shows the system status

 - Button:     Built in app 'buttons' works.

 - ADC:        ADC1 samples ADC_IN1. Built in app 'adc' works.

 - USB-FS-OTG: The console is running on the virtual serial port. Note that you
               have to press enter three times until NSH appears.

 - CAN:        Built in app 'can' is enabled but not tested, since no CAN transceiver
               is on board.