nuttx

History

Xiang Xiao 6a3c2aded6 Fix wait loop and void cast (#24 ) * Simplify EINTR/ECANCEL error handling 1. Add semaphore uninterruptible wait function 2 .Replace semaphore wait loop with a single uninterruptible wait 3. Replace all sem_xxx to nxsem_xxx * Unify the void cast usage 1. Remove void cast for function because many place ignore the returned value witout cast 2. Replace void cast for variable with UNUSED macro		2020-01-02 10:54:43 -06:00
..
configs
include
scripts	All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces.	2019-09-15 17:22:16 -06:00
src	Fix wait loop and void cast (#24 )	2020-01-02 10:54:43 -06:00
Kconfig
README.txt

README.txt

README
======

The Olimex STM32-H407 configuration is based on
stm32Fdiscovery and Olimex STM32-H405.

The H407 was programmed with ST-LINK/V2 from both Win8.1 and Ubuntu 14.04
This release provides baseline for H407 12MHZ clock in include/board.h

nsh - Only basic shell response tested on USART2
nsh_uext - Basic shell response tested on USART6 (UEXT)

Development Environment
=======================

Either Linux or Cygwin on Windows can be used for the development environment.
The source has been built only using the GNU toolchain (see below).  Other
toolchains will likely cause problems.

LEDs
====

The H407 board has 1 Status LED;

SDCard
======

Expects to be plugged in else hangs. TODO: Shouldn't hang.
SDIO 4bit with pulls/downs on pins. Doesn't have a SD card detect pin.

UARTs
=====

On the H407 board, ?? all uarts are available for pin mappings
USART2 can be used for nsh console like on Discovery board,
or you can use USART6 exposed via UEXT connector.

Olimex offers MOD-RS232 voltage level convertor for the UEXT so it can be
attached to computer serial port.

STM32-H407-specific Configuration Options
===============================================