| .. |
|
chip
|
SAMV7: Add CHIP ID and RSTC header file
|
2016-02-22 09:08:39 -06:00 |
|
chip.h
|
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
|
2015-03-28 13:09:01 -06:00 |
|
Kconfig
|
SAMV7 SPI: Add support for Peripheral Chip Select Decoding to address up to 15 slaved
|
2016-02-24 13:47:15 -06:00 |
|
Make.defs
|
Add spinlock support for ARMv7-M architectures
|
2016-02-09 13:44:22 -06:00 |
|
sam_allocateheap.c
|
Rename board_led_on to board_autoled_on
|
2015-11-01 09:07:06 -06:00 |
|
sam_clockconfig.c
|
SAMV7: Port the WDT driver from the SAMA5 to the SAMV7
|
2015-12-06 09:29:51 -06:00 |
|
sam_clockconfig.h
|
SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled
|
2015-08-11 15:48:26 -06:00 |
|
sam_config.h
|
SAMV7: Add configuration support (only) for use of USART as SPI
|
2015-11-02 13:58:19 -06:00 |
|
sam_emac.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_ethernet.c
|
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
|
2015-03-16 13:51:37 -06:00 |
|
sam_ethernet.h
|
SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts
|
2015-03-18 17:23:40 -06:00 |
|
sam_freerun.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_freerun.h
|
SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized
|
2016-02-05 10:22:11 -06:00 |
|
sam_gpio.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_gpio.h
|
Remove executable flag from more .c and .h files
|
2015-04-09 08:20:57 -06:00 |
|
sam_gpioirq.c
|
Correct some spacing issues
|
2015-10-07 11:39:06 -06:00 |
|
sam_hsmci_clkdiv.c
|
Remove executable flag from more .c and .h files
|
2015-04-09 08:20:57 -06:00 |
|
sam_hsmci.c
|
Cosmetic: Remove some harmless kruft left in last commit
|
2016-02-22 16:58:42 -06:00 |
|
sam_hsmci.h
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
sam_irq.c
|
Rename irqenable() to up_irq_enable(); rename irqdisable() to up_irq_disable()
|
2016-02-14 16:54:09 -06:00 |
|
sam_lowputc.c
|
Standard some naming if code sectino comments
|
2016-02-21 18:06:09 -06:00 |
|
sam_lowputc.h
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
sam_mcan.c
|
Missed a few name changes
|
2016-02-13 19:16:51 -06:00 |
|
sam_mcan.h
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:47:23 -06:00 |
|
sam_mpuinit.c
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
|
sam_mpuinit.h
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
|
sam_oneshot.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_oneshot.h
|
SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized
|
2016-02-05 10:22:11 -06:00 |
|
sam_pck.c
|
SAMV7: Add support for PCK6 as a timer/counter clock source
|
2015-12-04 10:49:20 -06:00 |
|
sam_pck.h
|
SAMV7: Extend programmable clock support for queries about the PCK configuration
|
2015-12-03 14:11:39 -06:00 |
|
sam_periphclks.h
|
arch/arm/src/samv7: Add SAME70 memory map
|
2015-11-14 12:01:28 -06:00 |
|
sam_progmem.c
|
arch/arm/src/samv7: Add SAME70 memory map
|
2015-11-14 12:01:28 -06:00 |
|
sam_progmem.h
|
SAMV7 flash logic is complete, uncompiled, and untested
|
2015-11-12 10:46:59 -06:00 |
|
sam_qspi.c
|
Trivial simplification to logic of last commit
|
2015-11-11 15:17:36 -06:00 |
|
sam_qspi.h
|
SAMV71 QSPI: Use new QSPI interface. Can't use SPI interface as planned; the hardware architectue is too different
|
2015-08-25 15:23:59 -06:00 |
|
sam_rswdt.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_serial.c
|
Standard some naming if code sectino comments
|
2016-02-21 18:06:09 -06:00 |
|
sam_spi_slave.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_spi.c
|
SAMV7 SPI: Add support for Peripheral Chip Select Decoding to address up to 15 slaved
|
2016-02-24 13:47:15 -06:00 |
|
sam_spi.h
|
SAMV7 SPI: Add support for Peripheral Chip Select Decoding to address up to 15 slaved
|
2016-02-24 13:47:15 -06:00 |
|
sam_ssc.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_ssc.h
|
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
|
2015-03-12 16:00:38 -06:00 |
|
sam_start.c
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
|
sam_start.h
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
sam_tc.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_tc.h
|
SAMV7: Add support for PCK6 as a timer/counter clock source
|
2015-12-04 10:49:20 -06:00 |
|
sam_tickless.c
|
SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized
|
2016-02-05 10:22:11 -06:00 |
|
sam_timerisr.c
|
Costmetic fixes to C coding style
|
2015-10-05 17:13:53 -06:00 |
|
sam_trng.c
|
SAMV7: Port SAMAD5 TRNG driver to the SAMV7
|
2015-12-06 08:53:31 -06:00 |
|
sam_trng.h
|
SAMV7: Port SAMAD5 TRNG driver to the SAMV7
|
2015-12-06 08:53:31 -06:00 |
|
sam_twihs.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_twihs.h
|
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
|
2016-02-02 12:08:23 -06:00 |
|
sam_usbdev.h
|
SAMV7: A little more USB-related stuff
|
2015-03-21 08:54:01 -06:00 |
|
sam_usbdevhs.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_userspace.c
|
SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized
|
2015-11-07 09:35:23 -06:00 |
|
sam_userspace.h
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
sam_wdt.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_wdt.h
|
SAMV7: Port the WDT driver from the SAMA5 to the SAMV7
|
2015-12-06 09:29:51 -06:00 |
|
sam_xdmac.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
sam_xdmac.h
|
SAMV7 XDMAC: Don't sample interrupt status registers in debug mode. This can cause loss of interrupts
|
2015-11-07 11:25:20 -06:00 |
|
same70_periphclks.h
|
arch/arm/src/samv7: Add SAME70 memory map
|
2015-11-14 12:01:28 -06:00 |
|
samv71_periphclks.h
|
arch/arm/src/samv7: Add support for SAME70 peripheral clocks
|
2015-11-14 11:41:53 -06:00 |
