29 lines
1.3 KiB
ReStructuredText
29 lines
1.3 KiB
ReStructuredText
``pwm`` General PWM Example
|
||
===========================
|
||
|
||
A test of a PWM device driver. It simply enables a pulsed output for a specified
|
||
frequency and duty for a specified period of time. This example can ONLY be
|
||
built as an NSH built-in function.
|
||
|
||
This test depends on these specific PWM/NSH configurations settings (your
|
||
specific PWM settings might require additional settings).
|
||
|
||
- ``CONFIG_PWM`` – Enables PWM support.
|
||
- ``CONFIG_PWM_PULSECOUNT`` – Enables PWM pulse count support (if the hardware
|
||
supports it).
|
||
- ``CONFIG_NSH_BUILTIN_APPS`` – Build the PWM test as an NSH built-in function.
|
||
|
||
Specific configuration options for this example include:
|
||
|
||
- ``CONFIG_EXAMPLES_PWM_DEVPATH`` – The path to the default PWM device. Default:
|
||
``/dev/pwm0``.
|
||
- ``CONFIG_EXAMPLES_PWM_FREQUENCY`` – The initial PWM frequency. Default: ``100`` Hz
|
||
- ``CONFIG_EXAMPLES_PWM_DUTYPCT`` – The initial PWM duty as a percentage. Default:
|
||
``50%``.
|
||
- ``CONFIG_EXAMPLES_PWM_DURATION`` – The initial PWM pulse train duration in
|
||
seconds. Used only if the current pulse count is zero (pulse count is only
|
||
supported if ``CONFIG_PWM_PULSECOUNT`` is defined). Default: ``5`` seconds.
|
||
- ``CONFIG_EXAMPLES_PWM_PULSECOUNT`` – The initial PWM pulse count. This option is
|
||
only available if ``CONFIG_PWM_PULSECOUNT`` is non-zero. Default: ``0`` (i.e., use
|
||
the duration, not the count).
|