sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3d6a5a2d0d
nuttx/wireless/ieee802154/mac802154_data.c
Alin Jerpelea df088c39f0 author: Anthony Merlino : update licenses to Apache 
Verge Aero has submitted the SGA

Anthony Merlino has submitted the SGA

Gregory Nutt has submitted the SGA

Sebastien Lorquet has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-06 20:38:14 +08:00

364 lines
12 KiB
C
Raw Blame History

/****************************************************************************
* wireless/ieee802154/mac802154_data.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <string.h>
#include <nuttx/mm/iob.h>
#include "mac802154.h"
#include "mac802154_internal.h"
#include "mac802154_data.h"
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mac802154_req_data
*
* Description:
* The MCPS-DATA.request primitive requests the transfer of a data SPDU
* (i.e., MSDU) from a local SSCS entity to a single peer SSCS entity.
* Confirmation is returned via the
* struct mac802154_maccb_s->conf_data callback.
*
****************************************************************************/
int mac802154_req_data(MACHANDLE mac,
FAR const struct ieee802154_frame_meta_s *meta,
FAR struct iob_s *frame, bool allowinterrupt)
{
FAR struct ieee802154_privmac_s *priv =
(FAR struct ieee802154_privmac_s *)mac;
FAR struct ieee802154_txdesc_s *txdesc;
uint16_t *frame_ctrl;
uint8_t mhr_len = 3;
int ret;
wlinfo("Accepting outbound frame io_len=%u io_offset=%u\n",
frame->io_len, frame->io_offset);
/* Check the required frame size */
if (frame->io_len > IEEE802154_MAX_PHY_PACKET_SIZE)
{
return -E2BIG;
}
/* Cast the first two bytes of the IOB to a uint16_t frame control field */
frame_ctrl = (FAR uint16_t *)&frame->io_data[0];
/* Ensure we start with a clear frame control field */
*frame_ctrl = 0;
/* Set the frame type to Data */
*frame_ctrl |= IEEE802154_FRAME_DATA << IEEE802154_FRAMECTRL_SHIFT_FTYPE;
/* If the msduLength is greater than aMaxMACSafePayloadSize, the MAC
* sublayer will set the Frame Version to one. [1] pg. 118.
*/
if ((frame->io_len - frame->io_offset) >
IEEE802154_MAX_SAFE_MAC_PAYLOAD_SIZE)
{
*frame_ctrl |= (1 << IEEE802154_FRAMECTRL_SHIFT_VERSION);
}
/* If the TXOptions parameter specifies that an acknowledged transmission
* is required, the AR field will be set appropriately, as described in
* 5.1.6.4 [1] pg. 118.
*/
*frame_ctrl |= (meta->flags.ackreq << IEEE802154_FRAMECTRL_SHIFT_ACKREQ);
/* If the destination address is present, copy the PAN ID and one of the
* addresses, depending on mode, into the MHR.
*/
if (meta->destaddr.mode != IEEE802154_ADDRMODE_NONE)
{
IEEE802154_PANIDCOPY(&frame->io_data[mhr_len], meta->destaddr.panid);
mhr_len += IEEE802154_PANIDSIZE;
if (meta->destaddr.mode == IEEE802154_ADDRMODE_SHORT)
{
IEEE802154_SADDRCOPY(&frame->io_data[mhr_len],
meta->destaddr.saddr);
mhr_len += IEEE802154_SADDRSIZE;
}
else if (meta->destaddr.mode == IEEE802154_ADDRMODE_EXTENDED)
{
int index;
/* The IEEE 802.15.4 Standard is confusing with regards to
* byte-order for * extended address. More research discovers
* that the extended address should be sent in reverse-canonical
* form.
*/
for (index = IEEE802154_EADDRSIZE - 1; index >= 0; index--)
{
frame->io_data[mhr_len++] = meta->destaddr.eaddr[index];
}
}
}
/* Set the destination addr mode inside the frame control field */
*frame_ctrl |= (meta->destaddr.mode << IEEE802154_FRAMECTRL_SHIFT_DADDR);
/* From this point on, we need exclusive access to the privmac struct */
ret = mac802154_lock(priv, allowinterrupt);
if (ret < 0)
{
/* Should only fail if interrupted by a signal */
wlwarn("WARNING: mac802154_takesem failed: %d\n", ret);
return ret;
}
/* If both destination and source addressing information is present, the
* MAC sublayer shall compare the destination and source PAN identifiers.
* [1] pg. 41.
*/
if (meta->srcmode != IEEE802154_ADDRMODE_NONE &&
meta->destaddr.mode != IEEE802154_ADDRMODE_NONE)
{
/* If the PAN identifiers are identical, the PAN ID Compression field
* shall be set to one, and the source PAN identifier shall be omitted
* from the transmitted frame. [1] pg. 41.
*/
if (IEEE802154_PANIDCMP(meta->destaddr.panid, priv->addr.panid))
{
*frame_ctrl |= IEEE802154_FRAMECTRL_PANIDCOMP;
}
}
if (meta->srcmode != IEEE802154_ADDRMODE_NONE)
{
/* If the destination address is not included, or if PAN ID Compression
* is off, we need to include the Source PAN ID.
*/
if ((meta->destaddr.mode == IEEE802154_ADDRMODE_NONE) ||
(!(*frame_ctrl & IEEE802154_FRAMECTRL_PANIDCOMP)))
{
IEEE802154_PANIDCOPY(&frame->io_data[mhr_len], priv->addr.panid);
mhr_len += IEEE802154_PANIDSIZE;
}
if (meta->srcmode == IEEE802154_ADDRMODE_SHORT)
{
IEEE802154_SADDRCOPY(&frame->io_data[mhr_len], priv->addr.saddr);
mhr_len += IEEE802154_SADDRSIZE;
}
else if (meta->srcmode == IEEE802154_ADDRMODE_EXTENDED)
{
int index;
/* The IEEE 802.15.4 Standard is confusing with regards to
* byte-order for * extended address. More research discovers
* that the extended address should be sent in reverse-canonical
* form.
*/
for (index = IEEE802154_EADDRSIZE - 1; index >= 0; index--)
{
frame->io_data[mhr_len++] = priv->addr.eaddr[index];
}
}
}
else
{
/* If this device is not the PAN coordinator, it shouldn't be sending
* frames with a source address mode of NONE
*/
if (priv->devmode != IEEE802154_DEVMODE_PANCOORD)
{
ret = -EINVAL;
goto errout_with_sem;
}
}
/* Set the source addr mode inside the frame control field */
*frame_ctrl |= (meta->srcmode << IEEE802154_FRAMECTRL_SHIFT_SADDR);
/* Each time a data or a MAC command frame is generated, the MAC sublayer
* shall copy the value of macDSN into the Sequence Number field of the MHR
* of the outgoing frame and then increment it by one. [1] pg. 40.
*/
frame->io_data[2] = priv->dsn++;
/* The MAC header we just created must never have exceeded where the app
* data starts. This should never happen since the offset should have
* been set via the same logic to calculate the header length as the logic
* here that created the header
*/
wlinfo("mhr_len=%u\n", mhr_len);
DEBUGASSERT(mhr_len == frame->io_offset);
/* Allocate the txdesc, waiting if necessary, allow interruptions */
ret = mac802154_txdesc_alloc(priv, &txdesc, true);
if (ret < 0)
{
/* Should only fail if interrupted by a signal while re-acquiring
* exclsem. So the lock is not held if a failure is returned.
*/
wlwarn("WARNING: mac802154_txdesc_alloc failed: %d\n", ret);
return ret;
}
/* Set the offset to 0 to include the header ( we do not want to
* modify the frame until AFTER the last place that -EINTR could
* be returned and could generate a retry. Subsequent error returns
* are fatal and no retry should occur.
*/
frame->io_offset = 0;
/* Then initialize the TX descriptor */
txdesc->conf->handle = meta->handle;
txdesc->frame = frame;
txdesc->frametype = IEEE802154_FRAME_DATA;
txdesc->ackreq = meta->flags.ackreq;
/* If the TxOptions parameter specifies that a GTS transmission is
* required, the MAC sublayer will determine whether it has a valid GTS as
* described 5.1.7.3. If a valid GTS could not be found, the MAC sublayer
* will discard the MSDU. If a valid GTS was found, the MAC sublayer will
* defer, if necessary, until the GTS. If the TxOptions parameter specifies
* that a GTS transmission is not required, the MAC sublayer will transmit
* the MSDU using either slotted CSMA-CA in the CAP for a beacon-enabled
* PAN or unslotted CSMA-CA for a nonbeacon-enabled PAN. Specifying a GTS
* transmission in the TxOptions parameter overrides an indirect
* transmission request. [1] pg. 118.
*/
if (meta->flags.usegts)
{
/* TODO:
* Support GTS transmission. This should just change where we link
* the transaction. Instead of going in the CSMA transaction list, it
* should be linked to the GTS' transaction list. We'll need to check
* if the GTS is valid, and then find the GTS, before linking.
* Note, we also don't have to try and kick-off any transmission here.
*/
ret = -ENOTSUP;
goto errout_with_txdesc;
}
else
{
/* If the TxOptions parameter specifies that an indirect transmission
* is required and this primitive is received by the MAC sublayer of a
* coordinator, the data frame is sent using indirect transmission, as
* described in 5.1.5 and 5.1.6.3. [1]
*/
if (meta->flags.indirect)
{
/* If the TxOptions parameter specifies that an indirect
* transmission is required and if the device receiving this
* primitive is not a coordinator, the destination address is not
* present, or the TxOptions parameter also specifies a
* GTS transmission, the indirect transmission option will be
* ignored. [1]
*
* NOTE: We don't just ignore the parameter. Instead, we throw an
* error, since this really shouldn't be happening.
*/
if (priv->devmode >= IEEE802154_DEVMODE_COORD &&
meta->destaddr.mode != IEEE802154_ADDRMODE_NONE)
{
/* Copy in a reference to the destination address to assist in
* searching when data is requested.
*/
memcpy(&txdesc->destaddr, &meta->destaddr,
sizeof(struct ieee802154_addr_s));
mac802154_setupindirect(priv, txdesc);
mac802154_unlock(priv)
}
else
{
ret = -EINVAL;
goto errout_with_txdesc;
}
}
else
{
/* Link the transaction into the CSMA transaction list */
sq_addlast((FAR sq_entry_t *)txdesc, &priv->csma_queue);
/* We no longer need to have the MAC layer locked. */
mac802154_unlock(priv)
/* Notify the radio driver that there is data available */
priv->radio->txnotify(priv->radio, false);
}
}
return OK;
errout_with_txdesc:
/* Free TX the descriptor, but preserve the IOB. */
txdesc->frame = NULL;
mac802154_txdesc_free(priv, txdesc);
errout_with_sem:
mac802154_unlock(priv)
return ret;
}
/****************************************************************************
* Internal MAC Functions
****************************************************************************/
Reference in New Issue View Git Blame Copy Permalink