ligd 5223d7a391 drivers/serial/uart_16550.c: Remove disabling of interrupts in up_earlyserialinit. up_irqinitialize() already disable all interrupts

2018-11-08 10:21:49 -06:00

..

Kconfig

drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.

2018-09-02 15:36:25 -06:00

Kconfig-16550

Squashed commit of the following:

2018-08-26 11:37:16 -06:00

Kconfig-lpuart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-sci

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-uart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-usart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

lowconsole.c

Silence some warnings

2016-05-26 14:06:13 -04:00

Make.defs

drivers/serial/tcdrain: tcdrain() was recently added to the NuttX C library. But there is a problem. The specification of tcdrain() requires that it be a cancellation point. In order to do this, tcdrain was moved from the C library into the OS and the addition cancellation point hooks were added. In non-FLAT builds, access via system calls is also now supported.

2017-10-06 10:55:36 -06:00

ptmx.c

Squashed commit of the following:

2018-09-15 10:49:41 -06:00

pty.c

Rename file_close_detached() to juse file_close() for better consistency in naming.

2018-09-15 13:04:56 -06:00

pty.h

PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt()

2016-07-15 09:39:33 -06:00

serial_dma.c

drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.

2018-09-02 15:36:25 -06:00

serial_io.c

drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.

2018-09-02 15:36:25 -06:00

serial.c

drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.

2018-09-02 15:36:25 -06:00

tcdrain.c

Make sure that labeling is used consistently in all function headers (part 2).

2018-02-01 12:03:55 -06:00

uart_16550.c

drivers/serial/uart_16550.c: Remove disabling of interrupts in up_earlyserialinit. up_irqinitialize() already disable all interrupts

2018-11-08 10:21:49 -06:00