sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3e45517599
nuttx/boards/arm/cxd56xx/spresense/include/board.h
Alin Jerpelea 3e45517599 Fix buffer overrun and memory leak on smartfs and improvement to cxd56xx 
Author: Alan Carvalho de Assis <acassis@gmail.com>

    Check all .c and .h against nxstyle and fix it.

Author: Alin Jerpelea <alin.jerpelea@sony.com>

    fs: smartfs: Fix over capacity write

    When the remaining capacity of flash is one sector, if a new root
    directory is created by file open, then the root directory's chain is
    broken and it causes to SmartFS filesystem crash. Once this fatal
    problem occurs, it's impossible to recover even if the system reboot.
    Fix it by finally update link of root directory.

    fs: smartfs: Fix buffer overrun

    fs: smartfs: Fix uninitialized variable warnings

    fs: smartfs: Memory leak fix

    boards: cxd56xx: Update spresense board.h

    - Fix PMIC assignment
    - Add specific pin configurations for spresense
    - Remove unnecessary definitions

    arch: cxd56xx: Add ITM syslog init at startup

    arch: cxd56xx: Enable DMA settings dynamically
2020-01-08 07:51:11 -03:00

297 lines
9.4 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/cxd56xx/spresense/include/board.h
*
* Copyright 2018 Sony Semiconductor Solutions Corporation
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name of Sony Semiconductor Solutions Corporation nor
* the names of its contributors may be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __BOARDS_ARM_CXD56XX_SPRESENSE_INCLUDE_BOARD_H
#define __BOARDS_ARM_CXD56XX_SPRESENSE_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/irq.h>
#include <sys/boardctl.h>
#include <stdbool.h>
#include "cxd56_clock.h"
#include "cxd56_power.h"
#include "cxd56_flash.h"
#include "cxd56_gauge.h"
#include "cxd56_charger.h"
#include "cxd56_gs2200m.h"
#include "cxd56_i2cdev.h"
#include "cxd56_sdcard.h"
#include "cxd56_wdt.h"
#include "cxd56_gpioif.h"
#include "cxd56_audio.h"
#include "cxd56_altmdm.h"
#include "cxd56_ak09912.h"
#include "cxd56_apds9930.h"
#include "cxd56_apds9960.h"
#include "cxd56_bh1721fvc.h"
#include "cxd56_bh1745nuc.h"
#include "cxd56_bm1383glv.h"
#include "cxd56_bm1422gmv.h"
#include "cxd56_bmi160.h"
#include "cxd56_bmp280.h"
#include "cxd56_kx022.h"
#include "cxd56_lt1pa01.h"
#include "cxd56_rpr0521rs.h"
#include "cxd56_sensors.h"
#include "cxd56_isx012.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking ****************************************************************/
#ifdef CONFIG_CXD56_80MHz
# define BOARD_FCLKOUT_FREQUENCY (80000000)
#else
# define BOARD_FCLKOUT_FREQUENCY (100000000)
#endif
/* UART clocking ***********************************************************/
/* Configure all UARTs to use the XTAL input frequency */
#define BOARD_UART0_BASEFREQ CONFIG_CXD56_XOSC_CLOCK
#define BOARD_UART1_BASEFREQ BOARD_FCLKOUT_FREQUENCY
#define BOARD_UART2_BASEFREQ CONFIG_CXD56_XOSC_CLOCK
/* LED definitions *********************************************************/
#define GPIO_LED1 (PIN_I2S1_BCK)
#define GPIO_LED2 (PIN_I2S1_LRCK)
#define GPIO_LED3 (PIN_I2S1_DATA_IN)
#define GPIO_LED4 (PIN_I2S1_DATA_OUT)
#define BOARD_LED1 (0)
#define BOARD_LED2 (1)
#define BOARD_LED3 (2)
#define BOARD_LED4 (3)
#define BOARD_NLEDS (4)
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
#define BOARD_LED4_BIT (1 << BOARD_LED4)
/* LED pattern for use with board_autoled_on() and board_autoled_off() */
#define LED_STARTED (BOARD_LED1_BIT)
#define LED_HEAPALLOCATE (BOARD_LED2_BIT)
#define LED_IRQSENABLED (BOARD_LED1_BIT | BOARD_LED2_BIT)
#define LED_STACKCREATED (BOARD_LED3_BIT)
#define LED_INIRQ (BOARD_LED1_BIT | BOARD_LED3_BIT)
#define LED_SIGNAL (BOARD_LED2_BIT | BOARD_LED3_BIT)
#define LED_ASSERTION (BOARD_LED1_BIT | BOARD_LED2_BIT | BOARD_LED3_BIT)
#define LED_PANIC (BOARD_LED4_BIT)
/* Buttons definitions *****************************************************/
#define BOARD_NUM_BUTTONS (2)
/* Power Control definitions ***********************************************/
/* For SPRESENSE board:
*
* Switch Device
* --------- -------------------------------
* LDO_EMMC GNSS A-ANT
* DDC_ANA N/A
* LDO_PERI N/A
* LSW2 CXD5247 Audio Digital VDD
* LSW3 SPI-Flash
* LSW4 TCXO & GNSS LNA
* GPO0
* GPO1 CXD5247 Audio Analog VDD
* GPO2
* GPO3
* GPO4 Camera
* GPO5 Camera
* GPO6 Audio External Amp.
* GPO7 Camera
*
*/
#define PMIC_NONE (0)
#define PMIC_TYPE_LSW (1u << 8)
#define PMIC_TYPE_GPO (1u << 9)
#define PMIC_TYPE_DDCLDO (1u << 10)
#define PMIC_GET_TYPE(v) ((v) & 0xff00)
#define PMIC_GET_CH(v) ((v) & 0x00ff)
#define PMIC_LSW(n) (PMIC_TYPE_LSW | (1u << (n)))
#define PMIC_GPO(n) (PMIC_TYPE_GPO | (1u << (n)))
#define PMIC_DDCLDO(n) (PMIC_TYPE_DDCLDO | (1u << (n)))
enum board_power_device
{
/* DDC/LDO */
POWER_DDC_IO = PMIC_DDCLDO(0),
POWER_LDO_EMMC = PMIC_DDCLDO(1),
POWER_DDC_ANA = PMIC_DDCLDO(2),
POWER_LDO_ANA = PMIC_DDCLDO(3),
POWER_DDC_CORE = PMIC_DDCLDO(4),
POWER_LDO_PERI = PMIC_DDCLDO(5),
/* Load Switch */
POWER_AUDIO_DVDD = PMIC_LSW(2),
POWER_FLASH = PMIC_LSW(3),
POWER_TCXO = PMIC_LSW(4),
POWER_LNA = PMIC_LSW(4),
/* GPO */
POWER_AUDIO_AVDD = PMIC_GPO(1),
POWER_AUDIO_MUTE = PMIC_GPO(6),
POWER_IMAGE_SENSOR = PMIC_GPO(4) | PMIC_GPO(5) | PMIC_GPO(7),
POWER_BTBLE = PMIC_NONE,
POWER_SENSOR = PMIC_NONE,
POWER_EMMC = PMIC_NONE,
POWER_LTE = PMIC_GPO(2),
};
/* CXD5247 audio control definitions ***************************************/
#define CXD5247_XRST PIN_SPI3_CS2_X
#define CXD5247_AVDD (0x01)
#define CXD5247_DVDD (0x02)
/* LCD Display clocking ****************************************************/
#define ILI9340_SPI_MAXFREQUENCY 40000000
/* Display device pin definitions ******************************************/
#if defined(CONFIG_LCD_ON_MAIN_BOARD) /* Display connected to main board. */
#define DISPLAY_RST PIN_I2S0_BCK
#define DISPLAY_DC PIN_I2S0_LRCK
#define DISPLAY_SPI 5
#define DISPLAY_DMA_TXCH (4)
#define DISPLAY_DMA_RXCH (5)
#define DISPLAY_DMA_TXCH_CFG CXD56_DMA_PERIPHERAL_SPI5_TX
#define DISPLAY_DMA_RXCH_CFG CXD56_DMA_PERIPHERAL_SPI5_RX
#define DISPLAY_DMA_TX_MAXSIZE (192000)
#define DISPLAY_DMA_RX_MAXSIZE (192000)
#else /* Display is connected through extension board. */
#define DISPLAY_RST PIN_SPI2_MISO
#define DISPLAY_DC PIN_PWM2
#define DISPLAY_SPI 4
#define DISPLAY_DMA_TXCH (2)
#define DISPLAY_DMA_RXCH (3)
#define DISPLAY_DMA_TXCH_CFG CXD56_DMA_PERIPHERAL_SPI4_TX
#define DISPLAY_DMA_RXCH_CFG CXD56_DMA_PERIPHERAL_SPI4_RX
#define DISPLAY_DMA_TX_MAXSIZE (192000)
#define DISPLAY_DMA_RX_MAXSIZE (192000)
#endif
/* Sensor device bus definitions *******************************************/
#define SENSOR_I2C 0
#define SENSOR_SPI 3
/* Imager device pin definitions *******************************************/
#define IMAGER_RST PIN_SDIO_DIR1_3
#define IMAGER_SLEEP PIN_SDIO_DIR0
#define IMAGER_I2C 2
/* Set signal id for notify USB device connection status and
* supply current value.
* signal returns "usbdev_notify_s" struct pointer in sival_ptr.
*
* Arg: Value of sinal number
*/
#define BOARDIOC_USBDEV_SETNOTIFYSIG (BOARDIOC_USER+0x0001)
/****************************************************************************
* Public Types
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Data
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: cxd56_boardinitialize
*
* Description:
*
****************************************************************************/
void cxd56_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_ARM_CXD56XX_SPRESENSE_INCLUDE_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink