26ee7e0449
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5600 42af7a65-404d-4744-a932-0658087f49c3
537 lines
18 KiB
Plaintext
537 lines
18 KiB
Plaintext
README
|
|
^^^^^
|
|
|
|
This is the README file for the port of NuttX to the Micropendous 3 board.
|
|
This board is develepmend by http://code.google.com/p/opendous/. The
|
|
Micropendous 3 is based on an Atmel AT90USB646, 647, 1286 or 1287 MCU.
|
|
NuttX was ported using the AT90USB647 version. As of this writing,
|
|
documentation for the Micropendous board is available here:
|
|
http://code.google.com/p/micropendous/wiki/Micropendous3
|
|
|
|
Contents
|
|
^^^^^^^^
|
|
|
|
o Micropendous3 Features
|
|
o Pin Usage
|
|
o Atmel AVRISP mkII Connection
|
|
o DFU Bootloader
|
|
o Serial Console
|
|
o Toolchains
|
|
o Windows Native Toolchains
|
|
o NuttX buildroot Toolchain
|
|
o avr-libc
|
|
o Micropendous3 Configuration Options
|
|
o Configurations
|
|
|
|
Micropendous3 Features
|
|
^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
o Based on the 64-pin USB AVR Microcontrollers: AT90USB646, AT90USB647,
|
|
AT90USB1286, or AT90USB1287.
|
|
o USB Full Speed (12Mbit/s)
|
|
o USB Device Mode (Host mode supported with AT90USBxx7 devices)
|
|
o 60kb (AT90USB64) or 120kb (AT90USB128) of available FLASH memory for
|
|
your programs (4kb(AT90USB64)/8kb(AT90USB128) used by USB bootloader -
|
|
stock Atmel or LUFA)
|
|
o 4 kbytes SRAM and 2 kbytes of EEPROM (AT90USB64) or 8 kbytes SRAM and 4
|
|
kbytes of EEPROM (AT90USB128)
|
|
o External SRAM is possible. Layout for CY7C1019D 1-Mbit SRAM (unpopulated)
|
|
o USB powered
|
|
o 16MHz crystal
|
|
o 48 General Purpose IO Pins (47 with external SRAM)
|
|
o Vcc=VBUS jumper selects whether USB VBUS or an external supply is used
|
|
to power the board
|
|
o RESET and HWB buttons to enable firmware loading over USB (no external
|
|
programmer required)
|
|
o HWB can be used as a user button
|
|
o USB-A Plug
|
|
o JTAG header
|
|
o Size LxWxH (including headers): 3.15" x 0.8" x 0.6" =~ 8cm x 2cm x 1.5cm
|
|
o Completely OpenHardware Design
|
|
|
|
Pin Usage
|
|
^^^^^^^^^
|
|
|
|
AT90USB90128/64 TQFP64
|
|
-- ------------------------ ---------------------------------------------
|
|
PIN SIGNAL BOARD CONNECTION
|
|
-- ------------------------ ---------------------------------------------
|
|
(left)
|
|
1 (INT.6/AIN.0) PE6 J3-25 E6, CY7C1019D ^CE (Unpopulated)
|
|
2 (INT.7/AIN.1/UVcon) PE7 J3-26 E7, CY7C1019D A16 (Unpopulated)
|
|
3 UVcc
|
|
4 D- USB DP
|
|
5 D+ USB DM
|
|
6 UGnd GND
|
|
7 UCap GND (via cap)
|
|
8 VBus USB VBUS
|
|
9 (IUID) PE3 J3-22 E3
|
|
10 (SS/PCINT0) PB0 J3-28 B0
|
|
11 (PCINT1/SCLK) PB1 J3-29 B1
|
|
12 (PDI/PCINT2/MOSI) PB2 J3-30 B2
|
|
13 (PDO/PCINT3/MISO) PB3 J3-31 B3
|
|
14 (PCINT4/OC.2A) PB4 J3-32 B4
|
|
15 (PCINT5/OC.1A) PB5 J3-33 B5
|
|
16 (PCINT6/OC.1B) PB6 J3-34 B6
|
|
(bottom)
|
|
17 (PCINT7/OC.0A/OC.1C) PB7 J3-35 B7
|
|
18 (INT4/TOSC1) PE4 J3-23 E4
|
|
19 (INT.5/TOSC2) PE5 J3-24 E5
|
|
20 RESET SW1
|
|
21 VCC VCC
|
|
22 GND GND
|
|
23 XTAL2 X1
|
|
24 XTAL1 X1
|
|
25 (OC0B/SCL/INT0) PD0 J3-36 D0
|
|
26 (OC2B/SDA/INT1) PD1 J3-37 D1
|
|
27 (RXD1/INT2) PD2 J3-38 D2
|
|
28 (TXD1/INT3) PD3 J3-39 D3
|
|
29 (ICP1) PD4 J3-40 D4
|
|
30 (XCK1) PD5 J3-41 D5
|
|
31 (T1) PD6 J3-42 D6
|
|
32 (T0) PD7 J3-43 D7
|
|
(right)
|
|
48 PA3 (AD3) J3-14 A3, 74AHC573 D3, CY7C1019D |O3 (Unpopulated)
|
|
47 PA4 (AD4) J3-15 A4, 74AHC573 D4, CY7C1019D |O4 (Unpopulated)
|
|
46 PA5 (AD5) J3-16 A5, 74AHC573 D5, CY7C1019D |O5 (Unpopulated)
|
|
45 PA6 (AD6) J3-17 A6, 74AHC573 D6, CY7C1019D |O6 (Unpopulated)
|
|
44 PA7 (AD7) J3-18 A7, 74AHC573 D7, CY7C1019D |O7 (Unpopulated)
|
|
43 PE2 (ALE/HWB) SW-2 (pulled-up), J3-21 E2, 74AHC573 Cp
|
|
42 PC7 (A15/IC.3/CLKO) J3-51 C7, CY7C1019D A15 (Unpopulated)
|
|
41 PC6 (A14/OC.3A) J3-50 C6, CY7C1019D A14 (Unpopulated)
|
|
40 PC5 (A13/OC.3B) J3-49 C5, CY7C1019D A13 (Unpopulated)
|
|
39 PC4 (A12/OC.3C) J3-48 C4, CY7C1019D A12 (Unpopulated)
|
|
38 PC3 (A11/T.3) J3-47 C3, CY7C1019D A11 (Unpopulated)
|
|
37 PC2 (A10) J3-46 C2, CY7C1019D A10 (Unpopulated)
|
|
36 PC1 (A9) J3-45 C1, CY7C1019D A9 (Unpopulated)
|
|
35 PC0 (A8) J3-44 C0, CY7C1019D A8 (Unpopulated)
|
|
34 PE1 (RD) J3-20 E1, CY7C1019D ^OE (Unpopulated)
|
|
33 PE0 (WR) J3-19 E0, CY7C1019D ^WE (Unpopulated)
|
|
(top)
|
|
64 AVCC (Power circuitry)
|
|
63 GND GND
|
|
62 AREF J3-2 AREF, (Power circuitry)
|
|
61 PF0 (ADC0) J3-3 F0
|
|
60 PF1 (ADC1) J3-4 F1
|
|
59 PF2 (ADC2) J3-5 F2
|
|
58 PF3 (ADC3) J3-6 F3
|
|
57 PF4 (ADC4/TCK) J3-7 F4, JTAG TCK
|
|
56 PF5 (ADC5/TMS) J3-8 F5, JTAG TMS
|
|
55 PF6 (ADC6/TDO) J3-9 F6, JTAG TD0
|
|
54 PF7 (ADC7/TDI) J3-20 F7, JTAG TDI
|
|
53 GND GND
|
|
52 VCC VCC
|
|
51 PA0 (AD0) J3-11 A0, 74AHC573 D0, CY7C1019D |O0 (Unpopulated)
|
|
50 PA1 (AD1) J3-12 A1, 74AHC573 D1, CY7C1019D |O1 (Unpopulated)
|
|
49 PA2 (AD2) J3-13 A2, 74AHC573 D2, CY7C1019D |O2 (Unpopulated)
|
|
|
|
Atmel AVRISP mkII Connection
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
ISP6PIN Header
|
|
--------------
|
|
|
|
1 2
|
|
MISO o o VCC
|
|
SCK o o MOSI
|
|
RESET o o GND
|
|
|
|
Micropendous 3 JTAG (JTAG10PIN Connector)
|
|
------------------- ---------------------
|
|
|
|
1 2 1 2
|
|
TCK o o GND TCK o o GND
|
|
TDO o o VCC TDO o o VTref
|
|
TMS o o RESET TMS o o nSRST
|
|
VCC o o N/C o o (nTRST)
|
|
TDI o o GND TDI o o GND
|
|
|
|
JTAGICE mkII Connection to 10-pin Header
|
|
------------------------------------------
|
|
10PIN Header 6PIN Header
|
|
-------------------- ---------------------
|
|
Pin 1 TCK Pin 3 SCK
|
|
Pin 2 GND Pin 6 GND
|
|
Pin 3 TDO Pin 1 MISO
|
|
Pin 4 VTref Pin 2 Vcc
|
|
Pin 6 nSRT Pin 5 Reset
|
|
Pin 9 TDI Pin 4 MOSI
|
|
|
|
DFU Bootloader
|
|
^^^^^^^^^^^^^^
|
|
|
|
There is also an DFU bootloader that resides in the upper 8Kb of FLASH
|
|
(unless you ERASE the flash with with ICE). You can enter this bootloader
|
|
(if it is in FLASH) by:
|
|
|
|
Holding both the SW1 (RESET) and SW2, then releasing SW1 while continuing
|
|
to hold SW2. SW2 connects to the PE2/HWB signal and causes a reset into
|
|
the bootloader memory region.
|
|
|
|
Then you can use FLIP to load code into FLASH (available at the Atmel Web
|
|
Site). The DFU USB driver for the DFU bootload is available in the usb
|
|
subdirectory in the FLIP installation location.
|
|
|
|
Serial Console
|
|
^^^^^^^^^^^^^^
|
|
|
|
A serial console is supported on an external MAX232/MAX3232 Connected
|
|
on PD2 and PD3:
|
|
|
|
Port D, Bit 2: RXD1, Receive Data (Data input pin for the USART1). When
|
|
the USART1 receiver is enabled this pin is configured as an input
|
|
regardless of the value of DDD2. When the USART forces this pin to
|
|
be an input, the pull-up can still be controlled by the PORTD2 bit.
|
|
Port D, Bit 3: TXD1, Transmit Data (Data output pin for the USART1).
|
|
When the USART1 Transmitter is enabled, this pin is configured as
|
|
an output regardless of the value of DDD3.
|
|
|
|
AT90USB90128/64 TQFP64
|
|
-- ------------------------ ---------------------------------------------
|
|
PIN SIGNAL BOARD CONNECTION
|
|
-- ------------------------ ---------------------------------------------
|
|
27 (RXD1/INT2) PD2 J3-38 D2
|
|
28 (TXD1/INT3) PD3 J3-39 D3
|
|
|
|
Toolchains
|
|
^^^^^^^^^^
|
|
|
|
There are several toolchain options. However, testing has been performed
|
|
using *only* the NuttX buildroot toolchain described below. Therefore,
|
|
the NuttX buildroot toolchain is the recommended choice.
|
|
|
|
The toolchain may be selected using the kconfig-mconf tool (via 'make menuconfig'),
|
|
by editing the existing configuration file (defconfig), or by overriding
|
|
the toolchain on the make commandline with CONFIG_AVR_TOOLCHAIN=<toolchain>.
|
|
|
|
The valid values for <toolchain> are BUILDROOT, CROSSPACK, LINUXGCC and WINAVR.
|
|
|
|
Buildroot:
|
|
|
|
There is a DIY buildroot version for the AVR boards here:
|
|
http://sourceforge.net/projects/nuttx/files/buildroot/. See the
|
|
following section for details on building this toolchain.
|
|
|
|
It is assumed in some places that buildroot toolchain is available
|
|
at ../misc/buildroot/build_avr. Edit the setenv.sh file if
|
|
this is not the case.
|
|
|
|
After configuring NuttX, make sure that CONFIG_AVR_BUILDROOT=y is set in your
|
|
.config file.
|
|
|
|
WinAVR:
|
|
|
|
For Cygwin development environment on Windows machines, you can use
|
|
WinAVR: http://sourceforge.net/projects/winavr/files/
|
|
|
|
It is assumed in some places that WinAVR is installed at C:/WinAVR. Edit the
|
|
setenv.sh file if this is not the case.
|
|
|
|
After configuring NuttX, make sure that CONFIG_AVR_WINAVR=y is set in your
|
|
.config file.
|
|
|
|
WARNING: There is an incompatible version of cygwin.dll in the WinAVR/bin
|
|
directory! Make sure that the path to the correct cygwin.dll file precedes
|
|
the path to the WinAVR binaries!
|
|
|
|
Linux:
|
|
|
|
For Linux, there are widely available avr-gcc packages. On Ubuntu, use:
|
|
sudo apt-get install gcc-avr gdb-avr avr-libc
|
|
|
|
After configuring NuttX, make sure that CONFIG_AVR_LINUXGCC=y is set in your
|
|
.config file.
|
|
|
|
Mac OS X:
|
|
|
|
For Mac OS X, the CrossPack for AVR toolchain is available from:
|
|
|
|
http://www.obdev.at/products/crosspack/index.html
|
|
|
|
This toolchain is functionally equivalent to the Linux GCC toolchain.
|
|
|
|
Windows Native Toolchains
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The WinAVR toolchain is a Windows native toolchain. There are several
|
|
limitations to using a Windows native toolchain in a Cygwin environment.
|
|
The three biggest are:
|
|
|
|
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
|
performed automatically in the Cygwin makefiles using the 'cygpath'
|
|
utility but you might easily find some new path problems. If so, check
|
|
out 'cygpath -w'
|
|
|
|
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic
|
|
links are used in Nuttx (e.g., include/arch). The make system works
|
|
around these problems for the Windows tools by copying directories
|
|
instead of linking them. But this can also cause some confusion for
|
|
you: For example, you may edit a file in a "linked" directory and find
|
|
that your changes had no effect. That is because you are building the
|
|
copy of the file in the "fake" symbolic directory. If you use a
|
|
Windows toolchain, you should get in the habit of making like this:
|
|
|
|
make clean_context all
|
|
|
|
An alias in your .bashrc file might make that less painful.
|
|
|
|
3. Dependencies are not made when using Windows versions of the GCC. This
|
|
is because the dependencies are generated using Windows pathes which do
|
|
not work with the Cygwin make.
|
|
|
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
|
|
|
An additional issue with the WinAVR toolchain, in particular, is that it
|
|
contains an incompatible version of the Cygwin DLL in its bin/ directory.
|
|
You must take care that the correct Cygwin DLL is used.
|
|
|
|
NuttX buildroot Toolchain
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
If NuttX buildroot toolchain source tarball cne can be downloaded from the
|
|
NuttX SourceForge download site (https://sourceforge.net/projects/nuttx/files/).
|
|
This GNU toolchain builds and executes in the Linux or Cygwin environment.
|
|
|
|
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
|
|
|
cd tools
|
|
./configure.sh micropendous3/<sub-dir>
|
|
|
|
NOTE: you also must copy avr-libc header files into the NuttX include
|
|
directory with command perhaps like:
|
|
|
|
cp -a /cygdrive/c/WinAVR/include/avr include/.
|
|
|
|
2. Download the latest buildroot package into <some-dir>
|
|
|
|
3. unpack the buildroot tarball. The resulting directory may
|
|
have versioning information on it like buildroot-x.y.z. If so,
|
|
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
|
|
|
4. cd <some-dir>/buildroot
|
|
|
|
5. cp configs/avr-defconfig-4.5.2 .config
|
|
|
|
6. make oldconfig
|
|
|
|
7. make
|
|
|
|
8. Edit setenv.h, if necessary, so that the PATH variable includes
|
|
the path to the newly built binaries.
|
|
|
|
See the file configs/README.txt in the buildroot source tree. That has more
|
|
detailed PLUS some special instructions that you will need to follow if you
|
|
are building a toolchain for Cygwin under Windows.
|
|
|
|
avr-libc
|
|
^^^^^^^^
|
|
|
|
Header Files
|
|
|
|
In any case, header files from avr-libc are required: http://www.nongnu.org/avr-libc/.
|
|
A snapshot of avr-lib is included in the WinAVR installation. For Linux
|
|
development platforms, avr-libc package is readily available (and would
|
|
be installed in the apt-get command shown above). But if you are using
|
|
the NuttX buildroot configuration on Cygwin, then you will have to build
|
|
get avr-libc from binaries.
|
|
|
|
Header File Installation
|
|
|
|
The NuttX build will required that the AVR header files be available via
|
|
the NuttX include directory. This can be accomplished by either copying
|
|
the avr-libc header files into the NuttX include directory:
|
|
|
|
cp -a <avr-libc-path>/include/avr <nuttx-path>/include/.
|
|
|
|
Or simply using a symbolic link:
|
|
|
|
ln -s <avr-libc-path>/include/avr <nuttx-path>/include/.
|
|
|
|
Build Notes:
|
|
|
|
It may not necessary to have a built version of avr-lib; only header files
|
|
are required. Bu if you choose to use the optimized libraru functions of
|
|
the flowing point library, then you may have to build avr-lib from sources.
|
|
Below are instructions for building avr-lib from fresh sources:
|
|
|
|
1. Download the avr-libc package from:
|
|
|
|
http://savannah.nongnu.org/projects/avr-libc/
|
|
|
|
I am using avr-lib-1.7.1.tar.bz2
|
|
|
|
2. Upack the tarball and cd into the
|
|
|
|
tar jxf avr-lib-1.7.1.tar.bz2
|
|
cd avr-lib-1.7.1
|
|
|
|
3. Configure avr-lib. Assuming that WinAVR is installed at the following
|
|
location:
|
|
|
|
export PATH=/cygdrive/c/WinAVR/bin:$PATH
|
|
./configure --build=`./config.guess` --host=avr
|
|
|
|
This takes a *long* time.
|
|
|
|
4. Make avr-lib.
|
|
|
|
make
|
|
|
|
This also takes a long time because it generates variants for nearly
|
|
all AVR chips.
|
|
|
|
5. Install avr-lib.
|
|
|
|
make install
|
|
|
|
Micropendous3 Configuration Options
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
|
be set to:
|
|
|
|
CONFIG_ARCH=avr
|
|
|
|
CONFIG_ARCH_family - For use in C code:
|
|
|
|
CONFIG_ARCH_AVR=y
|
|
|
|
CONFIG_ARCH_architecture - For use in C code:
|
|
|
|
CONFIG_ARCH_AT90USB=y
|
|
|
|
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
|
|
|
CONFIG_ARCH_CHIP=at90usb
|
|
|
|
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
|
|
chip. This should be exactly one of
|
|
|
|
CONFIG_ARCH_CHIP_AT90USB646=y
|
|
CONFIG_ARCH_CHIP_AT90USB647=y
|
|
CONFIG_ARCH_CHIP_AT90USB1286=y
|
|
CONFIG_ARCH_CHIP_AT90USB1287=y
|
|
|
|
Depending on which Micropendous3 version you have.
|
|
|
|
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
|
hence, the board that supports the particular chip or SoC.
|
|
|
|
CONFIG_ARCH_BOARD=micropendous3
|
|
|
|
CONFIG_ARCH_BOARD_name - For use in C code
|
|
|
|
CONFIG_ARCH_BOARD_MICROPENOUS3=y
|
|
|
|
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
|
of delay loops
|
|
|
|
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
|
endian)
|
|
|
|
CONFIG_DRAM_SIZE - Describes the installed DRAM. One of:
|
|
|
|
CONFIG_DRAM_SIZE=(4*1024) - (4Kb)
|
|
CONFIG_DRAM_SIZE=(8*1024) - (8Kb)
|
|
|
|
CONFIG_DRAM_START - The start address of installed SRAM
|
|
|
|
CONFIG_DRAM_START=0x800100
|
|
|
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
|
have LEDs
|
|
|
|
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
|
stack. If defined, this symbol is the size of the interrupt
|
|
stack in bytes. If not defined, the user task stacks will be
|
|
used during interrupt handling.
|
|
|
|
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
|
|
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
|
|
|
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
|
cause a 100 second delay during boot-up. This 100 second delay
|
|
serves no purpose other than it allows you to calibratre
|
|
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
|
|
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
|
|
the delay actually is 100 seconds.
|
|
|
|
Individual subsystems can be enabled:
|
|
|
|
CONFIG_AVR_INT0=n
|
|
CONFIG_AVR_INT1=n
|
|
CONFIG_AVR_INT2=n
|
|
CONFIG_AVR_INT3=n
|
|
CONFIG_AVR_INT4=n
|
|
CONFIG_AVR_INT5=n
|
|
CONFIG_AVR_INT6=n
|
|
CONFIG_AVR_INT7=n
|
|
CONFIG_AVR_USBHOST=n
|
|
CONFIG_AVR_USBDEV=n
|
|
CONFIG_AVR_WDT=n
|
|
CONFIG_AVR_TIMER0=n
|
|
CONFIG_AVR_TIMER1=n
|
|
CONFIG_AVR_TIMER2=n
|
|
CONFIG_AVR_TIMER3=n
|
|
CONFIG_AVR_SPI=n
|
|
CONFIG_AVR_USART1=y
|
|
CONFIG_AVR_ANACOMP=n
|
|
CONFIG_AVR_ADC=n
|
|
CONFIG_AVR_TWI=n
|
|
|
|
If the watchdog is enabled, this specifies the initial timeout. Default
|
|
is maximum supported value.
|
|
|
|
CONFIG_WDTO_15MS
|
|
CONFIG_WDTO_30MS
|
|
CONFIG_WDTO_60MS
|
|
CONFIG_WDTO_120MS
|
|
CONFIG_WDTO_1250MS
|
|
CONFIG_WDTO_500MS
|
|
CONFIG_WDTO_1S
|
|
CONFIG_WDTO_2S
|
|
CONFIG_WDTO_4S
|
|
CONFIG_WDTO_8S
|
|
|
|
AT90USB specific device driver settings
|
|
|
|
CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
|
|
console and ttys0 (default is no serial console).
|
|
CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
|
|
This specific the size of the receive buffer
|
|
CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
|
|
being sent. This specific the size of the transmit buffer
|
|
CONFIG_USARTn_BAUD - The configure BAUD of the USART. Must be
|
|
CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8.
|
|
CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
|
CONFIG_USARTn_2STOP - Two stop bits
|
|
|
|
Configurations
|
|
^^^^^^^^^^^^^^
|
|
|
|
Each Micropendous3 configuration is maintained in a sub-directory and can
|
|
be selected as follow:
|
|
|
|
cd tools
|
|
./configure.sh micropendous3/<subdir>
|
|
cd -
|
|
. ./setenv.sh
|
|
|
|
NOTE: You must also copy avr-libc header files, perhaps like:
|
|
|
|
cp -a /cygdrive/c/WinAVR/include/avr include/.
|
|
|
|
Where <subdir> is one of the following:
|
|
|
|
hello:
|
|
The simple apps/examples/hello "Hello, World!" example.
|
|
|
|
FLASH/SRAM Requirements (as of 6/16/2011):
|
|
|
|
$ avr-nuttx-elf-size nuttx
|
|
text data bss dec hex filename
|
|
24816 978 308 26102 65f6 nuttx
|
|
|
|
Strings are in SRAM.
|