nuttx

uip

Move tcp connection into SYN_RCVD state after aception instead of bypassing and moving directly into ESTABLISHED. From Max Holtzberg.

2013-10-17 09:49:33 -06:00

.gitignore

.dSYM only needs to be in the same .gitignore files as .exe

2013-05-30 15:02:04 -06:00

accept.c

First round of compile fixes for IPv6

2012-06-07 22:00:19 +00:00

bind.c

Add more low-level, thread-independent socket interfaces

2012-03-02 19:57:52 +00:00

connect.c

Add psock_connect()

2012-03-13 13:02:45 +00:00

getsockname.c

First round of compile fixes for IPv6

2012-06-07 22:00:19 +00:00

getsockopt.c

Fix bad net_clone.c compilation when CONFIG_NET_SOCKOPTS is not defined

2013-04-05 06:40:40 -06:00

Kconfig

Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y

2013-10-23 11:48:57 -06:00

listen.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

Makefile

Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic

2013-10-05 19:08:57 -06:00

net_addroute.c

Clean-up routing table design.

2013-10-05 12:05:51 -06:00

net_allocroute.c

Add NSH addroute and delroute commands

2013-10-05 15:42:20 -06:00

net_arptimer.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

net_checksd.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

net_clone.c

Fix bad net_clone.c compilation when CONFIG_NET_SOCKOPTS is not defined

2013-04-05 06:40:40 -06:00

net_close.c

Changed net_close debug output to verbose. From Max Holtzberg (2013-10-17)

2013-10-17 09:13:31 -06:00

net_delroute.c

Clean-up routing table design.

2013-10-05 12:05:51 -06:00

net_dsec2timeval.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

net_dup2.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

net_dup.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

net_foreachroute.c

Clean-up routing table design.

2013-10-05 12:05:51 -06:00

net_internal.h

netdev_findbyaddr() will not use a routing table if one is available. It will also make a better decision in the case there there is no routing table but only a single network interface.

2013-10-05 13:16:18 -06:00

net_monitor.c

Notify the socket layer if a connection is lost before the monitoring callback has been registered. From Max Holtzberg

2013-10-11 10:04:54 -06:00

net_poll.c

Fix all occurrences of "the the" in documentation and comments

2013-08-27 09:40:19 -06:00

net_route.h

Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic

2013-10-05 19:08:57 -06:00

net_router.c

Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic

2013-10-05 19:08:57 -06:00

net_sendfile.c

net_sendfile: Let the ACK callback handle the REXMIT flag and don't return until all data has been ACK'd. From Max Holtzberg

2013-10-17 09:54:48 -06:00

net_sockets.c

Clean-up routing table design.

2013-10-05 12:05:51 -06:00

net_timeo.c

Correct a buffer size error in the STM32 ethernet driver

2012-02-18 22:09:09 +00:00

net_timeval2dsec.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

net_vfcntl.c

Clean up some naming: fd vs. fildes vs. filedes and filep vs filp

2013-09-28 16:50:07 -06:00

netdev_count.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

netdev_findbyaddr.c

netdev_findbyaddr() will not use a routing table if one is available. It will also make a better decision in the case there there is no routing table but only a single network interface.

2013-10-05 13:16:18 -06:00

netdev_findbyname.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

netdev_foreach.c

Move all non-standard, NuttX header files into include/nuttx/net

2012-03-03 23:18:34 +00:00

netdev_ioctl.c

Fix ordering of operations in network ioctl handling. We need to able to distinguish an error because the command was not recognized vs. other kinds of error

2013-10-05 16:43:10 -06:00

netdev_register.c

Fix a deadlock when using the NSH ifconfig command over Telnet

2012-03-13 20:51:48 +00:00

netdev_router.c

SAMA5: LCDC driver progress

2013-10-07 12:05:16 -06:00

netdev_rxnotify.c

Use the new signature of rxnotify caused by the routing table. From Max Holtzberg

2013-10-06 07:38:15 -06:00

netdev_sem.c

Fix a deadlock when using the NSH ifconfig command over Telnet

2012-03-13 20:51:48 +00:00

netdev_txnotify.c

Use the new signature of rxnotify caused by the routing table. From Max Holtzberg

2013-10-06 07:38:15 -06:00

netdev_unregister.c

Email address change in nuttx/

2012-09-13 18:32:24 +00:00

recv.c

Add new psock layer; telnet session is now wrapped in a character device

2012-01-30 21:29:59 +00:00

recvfrom.c

Changed the meaning of the uip_*input functions. They now return success when a packet is dropped; This is needed for the ENCX24J600 driver that must make a decision to return the packet or not: It should not retain dropped packets. From Max Holtzberg

2013-10-11 10:48:00 -06:00

send.c

TCP: Change how initial MSS is handled. From Max Holtzberg

2013-10-17 09:45:38 -06:00

sendto.c

Changed the meaning of the uip_*input functions. They now return success when a packet is dropped; This is needed for the ENCX24J600 driver that must make a decision to return the packet or not: It should not retain dropped packets. From Max Holtzberg

2013-10-11 10:48:00 -06:00

setsockopt.c

Fix bad net_clone.c compilation when CONFIG_NET_SOCKOPTS is not defined

2013-04-05 06:40:40 -06:00

socket.c

Add more low-level, thread-independent socket interfaces

2012-03-02 19:57:52 +00:00