a830d59da2
Squashed commit of the following:
drivers/lcd/tda19988.c: Numerous changes for a clean compilation.
drivers/lcd/tda19988: Bring in the final pieces from the FreeBSD TDA19988 driver. The driver is now code complete.
drivers/lcd/tda19988.c: Flesh on EDID read logic (still not complete). Add unlink shutdown logic.
drivers/lcd/tda19988.c: Add logic to read one EDID block.
drivers/lcd/tda19988.c: Add tda19988_read_edid() interface. Flesh read() and seek() methods.
drivers/lcd/st7032.c: Fix another error in seek method: Does not account for negative offsets!
drivers/lcd/tda19988.c: Add basic IOCTL infrastructure to support configuratin the video mode. Mostly just a framework for now.
drivers/lcd/tda19988.c: Add more register definitions. Encode page+address in the same was as FreeBSD.
drivers/lcd/tda19988.c: Add support for CEC messaging.
drivers/lcd/tda19988.c: Implement the unlink method. No IOCTLs defined yet.
drivers/lcd/tda19988.c: Add placeholders for missing character driver methods.
drivers/lcd/tda19988.c: Trivial interface improvement to permit reading multiple TDA19988 registers.
drivers/lcd/tda19988.c: Feeble start of TCA19988 drivers. Consists of lower half interface definition and some I2C helper functions. Nothing more.
158 lines
4.0 KiB
Plaintext
158 lines
4.0 KiB
Plaintext
############################################################################
|
|
# drivers/lcd/Make.defs
|
|
#
|
|
# Copyright (C) 2010-2012, 2017-2018 Gregory Nutt. All rights reserved.
|
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
#
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
# used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
############################################################################
|
|
|
|
ifeq ($(CONFIG_LCD),y)
|
|
|
|
# Support for the generic LCD framebufer front-end
|
|
|
|
ifeq ($(CONFIG_LCD_FRAMEBUFFER),y)
|
|
CSRCS += lcd_framebuffer.c
|
|
endif
|
|
|
|
# Include support for Graphics LCD drivers
|
|
|
|
ifeq ($(CONFIG_LCD_FT80X),y)
|
|
CSRCS += ft80x.c
|
|
ifeq ($(CONFIG_LCD_FT80X_SPI),y)
|
|
CSRCS += ft80x_spi.c
|
|
else ifeq ($(CONFIG_LCD_FT80X_I2C),y)
|
|
CSRCS += ft80x_i2c.c
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_P14201),y)
|
|
CSRCS += p14201.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_UG2864AMBAG01),y)
|
|
CSRCS += ug-2864ambag01.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_UG9664HSWAG01),y)
|
|
CSRCS += ug-9664hswag01.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_SSD1306),y)
|
|
CSRCS += ssd1306_base.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_SSD1306_SPI),y)
|
|
CSRCS += ssd1306_spi.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_SSD1306_I2C),y)
|
|
CSRCS += ssd1306_i2c.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_SSD1289),y)
|
|
CSRCS += ssd1289.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_SSD1351),y)
|
|
CSRCS += ssd1351.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_MIO283QT2),y)
|
|
CSRCS += mio283qt2.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_MAX7219),y)
|
|
CSRCS += max7219.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_MIO283QT9A),y)
|
|
CSRCS += mio283qt9a.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_PCD8544),y)
|
|
CSRCS += pcd8544.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_ST7565),y)
|
|
CSRCS += st7565.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_ST7567),y)
|
|
CSRCS += st7567.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_SHARP_MEMLCD),y)
|
|
CSRCS += memlcd.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_ILI9341),y)
|
|
CSRCS += ili9341.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_RA8875),y)
|
|
CSRCS += ra8875.c
|
|
endif
|
|
endif # CONFIG_LCD
|
|
|
|
ifeq ($(CONFIG_SLCD),y)
|
|
|
|
# Include support for Alphanumeric/Segment LCD drivers
|
|
|
|
ifeq ($(CONFIG_LCD_BACKPACK),y)
|
|
CSRCS += pcf8574_lcd_backpack.c
|
|
endif
|
|
|
|
ifeq ($(CONFIG_LCD_ST7032),y)
|
|
CSRCS += st7032.c
|
|
endif
|
|
endif # CONFIG_SLCD
|
|
|
|
# Other LCD-related devices
|
|
|
|
ifeq ($(CONFIG_LCD_TDA19988),y)
|
|
CSRCS += tda19988.c
|
|
endif
|
|
|
|
# Include LCD driver build support (the nested if-then-else implements an OR)
|
|
|
|
ifeq ($(CONFIG_LCD),y)
|
|
DEPPATH += --dep-path lcd
|
|
VPATH += :lcd
|
|
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)lcd}
|
|
else ifeq ($(CONFIG_SLCD),y)
|
|
DEPPATH += --dep-path lcd
|
|
VPATH += :lcd
|
|
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)lcd}
|
|
else ifeq ($(CONFIG_LCD_OTHER),y)
|
|
DEPPATH += --dep-path lcd
|
|
VPATH += :lcd
|
|
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)lcd}
|
|
endif
|