263 lines
9.1 KiB
Plaintext
263 lines
9.1 KiB
Plaintext
README.txt
|
||
==========
|
||
|
||
The MakerLisp machine is a portable, modular computer system, designed to
|
||
recapture the feel of classic computing, with modern hardware.
|
||
|
||
The machine centers on a 2" x 3.5" business card-sized CPU, which can be used
|
||
stand-alone, or plugged in to a 2" x 8" main board, for expansion into a full
|
||
computer system. A laser-cut wood enclosure holds a small keyboard, an LCD
|
||
monitor, the circuit boards, and a prototyping area with a breadboard for
|
||
electronics experimentation and development.
|
||
|
||
The CPU is a Zilog eZ80 running at 50 MHz, with up to 16 Mb of zero-wait state
|
||
RAM. A VGA display adapter provides an IBM PC-like color text-mode display. A
|
||
USB Host Controller supports a USB keyboard and other USB communications.
|
||
Data storage and interchange is accomplished by a micro-SD card supporting the
|
||
FAT file system. All four of these circuit boards (shown on the web site's cover
|
||
page) are new MakerLisp products, and will be available as part of the first
|
||
product offering
|
||
|
||
Contents
|
||
========
|
||
|
||
o ZDS-II Compiler Versions
|
||
o Serial Console
|
||
- UARTs
|
||
- Serial Keyboard and VGA Display
|
||
o LEDs and Buttons
|
||
- LEDs
|
||
- Buttons
|
||
o Configurations
|
||
- Common Configuration Notes
|
||
- Configuration Subdirectories
|
||
|
||
ZDS-II Compiler Versions
|
||
========================
|
||
|
||
Version 5.3.0
|
||
|
||
I verifed compilation using 5.30 on June 2, 2019. To use this version,
|
||
I had to make spurious modification to the implementation of gmtimer() to
|
||
work around an internal compiler error. I have still not verified that
|
||
are no errors in the compiled code.
|
||
|
||
Other Versions
|
||
If you use any version of ZDS-II other than 5.3.0 or if you install ZDS-II
|
||
at any location other than the default location, you will have to modify
|
||
three files: (1) arch/arm/z80/src/ez80/Kconfig, (2)
|
||
configs/makerlisp/scripts/Make.defs and, perhaps, (3)
|
||
arch/z80/src/ez80/Toolchain.defs.
|
||
|
||
Serial Console
|
||
==============
|
||
|
||
There are two options for a serial console: (1) A UART connected to a
|
||
terminal program or (2) the MakerLisp Serial Keyboard and VGA display.
|
||
|
||
UARTs
|
||
-----
|
||
|
||
The eZ80 has two UART peripherals:
|
||
|
||
UART 0: All of Port D pins can support UART0 functions when configured
|
||
for the alternate function 7. For typical configurations only RXD and TXD
|
||
need be configured.
|
||
|
||
eZ80 PIN BOARD SIGNAL CN1 ACCESS
|
||
=======================================
|
||
PD0/TXD0/IR_IXD CN1_TX0 Pin 61
|
||
PD1/RXD0/IR_RXD CN1_RX0 Pin 59
|
||
PD2/RTS0 CN1_RTS0 Pin 63
|
||
PD3/CTS0 CN1_CTS0 Pin 65
|
||
PD4/DTR0 CN1_DTR0 Pin 67
|
||
PD5/DSR0 CN1_DSR0 Pin 69
|
||
PD6/DCD0 CN1_DCD0 Pin 71
|
||
PD7/RIO0 CN1_RI0 Pin 73
|
||
|
||
UART 0: All of Port C pins can support UART1 functions when configured
|
||
for the alternate function 7. For typical configurations only RXD and TXD
|
||
need be configured.
|
||
|
||
eZ80 PIN BOARD SIGNAL CN1 ACCESS
|
||
=======================================
|
||
PC0/TXD1 CN1_TX1 Pin 62
|
||
PC1/RXD1 CN1_RX1 Pin 60
|
||
PC2/RTS1 CN1_RTS1 Pin 64
|
||
PC3/CTS1 CN1_CTS1 Pin 66
|
||
PC4/DTR1 CN1_DTR1 Pin 68
|
||
PC5/DSR1 CN1_DSR1 Pin 70
|
||
PC6/DCD1 CN1_DCD1 Pin 72
|
||
PC7/RIO1 CN1_RI1 Pin 74
|
||
|
||
For use with a host terminal emulation, it will be necessary to connect
|
||
either a TTL-to-RS232 or a TTL-to-USB Serial adapter to CN1 pins 59 and
|
||
61, and 60 and 62, depending on the selected UART.
|
||
|
||
Serial Keyboard and VGA Display
|
||
-------------------------------
|
||
|
||
The serial console can also be implemented using the MakerLisp USB
|
||
Keyboard Controller Board and VGA Display Controller. These are accessed
|
||
via the one UART port, UART0.
|
||
|
||
In the default MakerLisp configuration. These boards are connected as
|
||
follows:
|
||
|
||
1. VGA display controller connections (UART0 TX)
|
||
|
||
Board interface header
|
||
5 – 5V regulated power input
|
||
RX – VGA Display Controller serial input
|
||
C – VGA Display Controller ready output
|
||
TX – VGA Display Controller serial output
|
||
G – GND
|
||
|
||
Connections:
|
||
|
||
a. 5V '5' pin on VGA board to expansion board power distribution 5V.
|
||
b. Ground 'G' pin on VGA board to expansion board power distribution
|
||
ground.
|
||
c. Receive 'RX' pin on VGA board to expansion board GPIO PD0 (TXD0).
|
||
d. Communication, terminal ready indicator 'C' pin on VGA board to
|
||
expansion board GPIO PB1.
|
||
e. Transmit 'TX' pin on VGA board to USB keyboard controller 'R'
|
||
|
||
To use the VGA display controller with stdout and stderr, you also
|
||
need to selection CONFIG_MAKERLISP_VGA=y in your configuration. This
|
||
enables a required VGA initialization sequence.
|
||
|
||
2. USB keyboard controller (UART0 RX)
|
||
|
||
Board interface header
|
||
|
||
5 – 5V regulated power input
|
||
R – USB Keyboard Controller serial input
|
||
T – USB Keyboard Controller serial output
|
||
G – GND
|
||
|
||
Connections:
|
||
|
||
a. 5V '5' pin on USB board to (other) expansion board power
|
||
distribution 5V.
|
||
b. Ground 'G' pin on USB board to (other) expansion board power
|
||
distribution ground.
|
||
c. Receive 'R' pin on USB board to VGA board 'TX' (see above).
|
||
d. Transmit 'T' pin on USB board to expansion board GPIO PD1 (RXD0).
|
||
|
||
If your keyboard does not seem to be doing anything, check the 'RX'
|
||
jumper on the expansion board. For input from a USB keyboard, and NOT
|
||
the USB/UART connection, you want this jumper REMOVED, not bridging the
|
||
two header pins front to back.
|
||
|
||
The PC terminal software should be configured as described in the MakerLisp
|
||
Putty HOWTO document: 115200N1 BAUD.
|
||
|
||
Default Serial Console
|
||
----------------------
|
||
|
||
UART0 is the default serial console in all configurations unless
|
||
otherwise noted in the description of the configuration.
|
||
|
||
LEDs and Buttons
|
||
================
|
||
|
||
LEDs
|
||
----
|
||
|
||
Three LEDs are available on the CPU Card, but none are available for
|
||
general use by applications:
|
||
|
||
D2 RED: CPU Card power. Not under eZ80 control
|
||
D3 GREEN: Driven by CPU GPI/O pin. However, it has some additional
|
||
properties:
|
||
|
||
1. On input, it will be '1' if the I/O expansion board is
|
||
present.
|
||
2. Setting it to an output of '0' will generate a system reset.
|
||
3. Setting it to an output of '1' will not only illuminate the
|
||
LED take the card out of reset and enable power to the SD
|
||
card slot.
|
||
|
||
As a consequence, the GREEN LED will not be illuminated if
|
||
SD card support or SPI is disabled. The only effect of
|
||
CONFIG_ARCH_LEDS is that the GREEN LED will turned off in
|
||
the event of a crash.
|
||
|
||
D1 AMBER: Controlled by the on-board MCP2221A USB bridge and provides USB
|
||
enumeration status. Not under eZ80 control.
|
||
|
||
Buttons
|
||
-------
|
||
|
||
The MakerLisp CPU board has no on-board buttons that can be sensed by the
|
||
eZ80.
|
||
|
||
Configurations
|
||
==============
|
||
|
||
Common Configuration Notes
|
||
--------------------------
|
||
|
||
1. src/ and include/
|
||
|
||
These directories contain common logic for all MakerLisp
|
||
configurations.
|
||
|
||
2. Variations on the basic MakerLisp configuration are maintained
|
||
in subdirectories. To configure any specific configuration, do the
|
||
following steps:
|
||
|
||
tools/configure.sh [OPTIONS] makerlisp/<sub-directory>
|
||
make
|
||
|
||
Where <sub-directory> is the specific board configuration that you
|
||
wish to build. Use 'tools/configure.sh -h' to see the possible
|
||
options. Typical options are:
|
||
|
||
-l Configure for a Linux host
|
||
-c Configure for a Windows Cygwin host
|
||
-g Configure for a Windows MYS2 host
|
||
|
||
Use configure.bat instead of configure.sh if you are building in a
|
||
native Windows environment.
|
||
|
||
The available board-specific configurations are summarized in the
|
||
following paragraphs.
|
||
|
||
3. This configuration uses the mconf-based configuration tool. To
|
||
change this configurations using that tool, you should:
|
||
|
||
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||
see additional README.txt files in the NuttX tools repository.
|
||
|
||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||
reconfiguration process.
|
||
|
||
Configuration Subdirectories
|
||
----------------------------
|
||
|
||
nsh:
|
||
|
||
This configuration builds the NuttShell (NSH). That code can be
|
||
found in examples/nsh. For more information see: examples/nsh/README.txt
|
||
and Documentation/NuttShell.html.
|
||
|
||
NOTES:
|
||
|
||
1. A serial console is provided on UART0. This configuration may work
|
||
with or without the the VGA and Keyboard adapter boards. For use
|
||
with a host terminal emulation without the accessory boards, it will
|
||
be necessary to connect either a TTL-to-RS232 or a TTL-to-USB Serial
|
||
adapter to CN1 pins 59 and 61.
|
||
|
||
The default baud setting is 57600N1.
|
||
|
||
To use the VGA display controller with stdout and stderr, you also
|
||
need to selection CONFIG_MAKERLISP_VGA=y in your configuration. This
|
||
enables a required VGA initialization sequence.
|
||
|
||
The PC terminal software should be configured as described in the
|
||
MakerLisp Putty HOWTO document: 115200N1 BAUD.
|
||
|