nuttx/fs/vfs/fs_signalfd.c
Jukka Laitinen 41e9df2f3e Add ftruncate into file operation calls
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-01-02 11:23:20 -03:00

405 lines
11 KiB
C

/****************************************************************************
* fs/vfs/fs_signalfd.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <poll.h>
#include <assert.h>
#include <errno.h>
#include <fcntl.h>
#include <debug.h>
#include <nuttx/mutex.h>
#include <nuttx/signal.h>
#include <sys/signalfd.h>
#include "inode/inode.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure describes the internal state of the driver */
struct signalfd_priv_s
{
sigset_t sigmask; /* The set of signals caller wishes */
mutex_t mutex; /* Enforces device exclusive access */
uint8_t crefs; /* References counts on signalfd (max: 255) */
FAR struct pollfd *fds[CONFIG_SIGNAL_FD_NPOLLWAITERS];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int signalfd_file_open(FAR struct file *filep);
static int signalfd_file_close(FAR struct file *filep);
static ssize_t signalfd_file_read(FAR struct file *filep,
FAR char *buffer, size_t len);
static int signalfd_file_poll(FAR struct file *filep,
FAR struct pollfd *fds, bool setup);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_signalfd_fileops =
{
signalfd_file_open, /* open */
signalfd_file_close, /* close */
signalfd_file_read, /* read */
NULL, /* write */
NULL, /* seek */
NULL, /* ioctl */
NULL, /* truncate */
signalfd_file_poll /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
static struct inode g_signalfd_inode =
{
NULL, /* i_parent */
NULL, /* i_peer */
NULL, /* i_child */
1, /* i_crefs */
FSNODEFLAG_TYPE_DRIVER, /* i_flags */
{
&g_signalfd_fileops /* u */
}
};
/****************************************************************************
* Private Functions
****************************************************************************/
static void signalfd_action(int signo, FAR siginfo_t *info,
FAR void *ucontext)
{
FAR struct signalfd_priv_s *dev = info->si_user;
if (sigismember(&dev->sigmask, signo) > 0)
{
poll_notify(dev->fds, CONFIG_SIGNAL_FD_NPOLLWAITERS, POLLIN);
}
}
static int signalfd_file_open(FAR struct file *filep)
{
FAR struct signalfd_priv_s *dev = filep->f_priv;
int ret;
nxmutex_lock(&dev->mutex);
if (dev->crefs >= 255)
{
ret = -EMFILE;
}
else
{
dev->crefs += 1;
ret = OK;
}
nxmutex_unlock(&dev->mutex);
return ret;
}
static int signalfd_file_close(FAR struct file *filep)
{
FAR struct signalfd_priv_s *dev = filep->f_priv;
int signo;
nxmutex_lock(&dev->mutex);
if (dev->crefs > 1)
{
dev->crefs--;
nxmutex_unlock(&dev->mutex);
return OK;
}
for (signo = MIN_SIGNO; signo <= MAX_SIGNO; signo++)
{
if (nxsig_ismember(&dev->sigmask, signo))
{
signal(signo, SIG_DFL);
}
}
nxmutex_unlock(&dev->mutex);
nxmutex_destroy(&dev->mutex);
kmm_free(dev);
return OK;
}
static ssize_t signalfd_file_read(FAR struct file *filep,
FAR char *buffer, size_t len)
{
FAR struct signalfd_priv_s *dev = filep->f_priv;
FAR struct signalfd_siginfo *siginfo;
struct siginfo info;
sigset_t pendmask;
ssize_t ret;
int count;
count = len / sizeof(struct signalfd_siginfo);
if (buffer == NULL || count == 0)
{
return -EINVAL;
}
pendmask = nxsig_pendingset(NULL) & dev->sigmask;
if (pendmask == 0)
{
if (filep->f_oflags & O_NONBLOCK)
{
return -EAGAIN;
}
else
{
pendmask = dev->sigmask;
}
}
siginfo = (FAR struct signalfd_siginfo *)buffer;
do
{
ret = nxsig_waitinfo(&pendmask, &info);
if (ret < 0)
{
goto errout;
}
memset(siginfo, 0, sizeof(*siginfo));
siginfo->ssi_signo = info.si_signo;
siginfo->ssi_errno = info.si_errno;
siginfo->ssi_code = info.si_code;
#ifdef CONFIG_SCHED_HAVE_PARENT
siginfo->ssi_pid = info.si_pid;
siginfo->ssi_status = info.si_status;
#endif
siginfo->ssi_int = info.si_value.sival_int;
siginfo->ssi_ptr = (uint64_t)(uintptr_t)info.si_value.sival_ptr;
siginfo++;
pendmask = nxsig_pendingset(NULL) & dev->sigmask;
}
while (--count != 0 && pendmask != 0);
errout:
len = (FAR char *)siginfo - buffer;
return len > 0 ? len : ret;
}
static int signalfd_file_poll(FAR struct file *filep,
FAR struct pollfd *fds, bool setup)
{
FAR struct signalfd_priv_s *dev = filep->f_priv;
int ret = 0;
int i;
nxmutex_lock(&dev->mutex);
if (!setup)
{
/* This is a request to tear down the poll. */
FAR struct pollfd **slot = (FAR struct pollfd **)fds->priv;
/* Remove all memory of the poll setup */
*slot = NULL;
fds->priv = NULL;
goto out;
}
/* This is a request to set up the poll. Find an available
* slot for the poll structure reference
*/
for (i = 0; i < CONFIG_SIGNAL_FD_NPOLLWAITERS; i++)
{
/* Find an available slot */
if (!dev->fds[i])
{
/* Bind the poll structure and this slot */
dev->fds[i] = fds;
fds->priv = &dev->fds[i];
break;
}
}
if (i >= CONFIG_SIGNAL_FD_NPOLLWAITERS)
{
ret = -EBUSY;
goto out;
}
/* Notify the POLLIN event if the counter is not zero */
if ((nxsig_pendingset(NULL) & dev->sigmask) != 0)
{
poll_notify(dev->fds, CONFIG_SIGNAL_FD_NPOLLWAITERS, POLLIN);
}
out:
nxmutex_unlock(&dev->mutex);
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: signalfd
*
* Description:
* signalfd() creates a file descriptor that can be used to accept signals
* targeted at the caller.
*
* The mask argument specifies the set of signals that the caller wishes
* to accept via the file descriptor. This argument is a signal set whose
* contents can be initialized using the macros described in sigsetops.
* Normally, the set of signals to be received via the file descriptor
* should be blocked using sigprocmask, to prevent the signals being
* handled according to their default dispositions. It is not possible
* to receive SIGKILL or SIGSTOP signals via a signalfd file descriptor.
* these signals are silently ignored if specified in mask.
*
* If the fd argument is -1, then the call creates a new file descriptor
* and associates the signal set specified in mask with that file
* descriptor. If fd is not -1, then it must specify a valid existing
* signalfd file descriptor, and mask is used to replace the signal
* set associated with that file descriptor.
*
* The following values may be bitwise ORed in flags to change the
* behavior of signalfd():
*
* SFD_NONBLOCK Set the O_NONBLOCK file status flag on the open file
* description referred to by the new file descriptor.
* Using this flag saves extra calls to fcntl to achieve
* the same result.
*
* SFD_CLOEXEC Set the close-on-exec (FD_CLOEXEC) flag on the new file
* descriptor. See the description of the O_CLOEXEC flag
* in open for reasons why this may be useful.
*
* Returned Value:
* On success, signalfd() returns a signalfd file descriptor; this is
* either a new file descriptor (if fd was -1), or fd if fd was a valid
* signalfd file descriptor. On error, -1 is returned and errno is set
* to indicate the error.
*
****************************************************************************/
int signalfd(int fd, FAR const sigset_t *mask, int flags)
{
FAR struct signalfd_priv_s *dev;
struct sigaction act;
int ret = EINVAL;
int signo;
if (flags & ~(SFD_CLOEXEC | SFD_NONBLOCK))
{
goto errout;
}
if (fd == -1)
{
dev = kmm_zalloc(sizeof(*dev));
if (dev == NULL)
{
ret = ENOMEM;
goto errout;
}
nxmutex_init(&dev->mutex);
fd = file_allocate(&g_signalfd_inode, O_RDOK | flags,
0, dev, 0, true);
if (fd < 0)
{
ret = -fd;
goto errout_with_dev;
}
}
else
{
FAR struct file *filep;
if (fs_getfilep(fd, &filep) < 0)
{
ret = EBADF;
goto errout;
}
if (filep->f_inode->u.i_ops != &g_signalfd_fileops)
{
goto errout;
}
dev = filep->f_priv;
for (signo = MIN_SIGNO; signo <= MAX_SIGNO; signo++)
{
if (nxsig_ismember(&dev->sigmask, signo))
{
signal(signo, SIG_DFL);
}
}
}
dev->sigmask = *mask;
nxsig_delset(&dev->sigmask, SIGKILL);
nxsig_delset(&dev->sigmask, SIGSTOP);
act.sa_sigaction = signalfd_action;
act.sa_flags = SA_KERNELHAND | SA_SIGINFO;
act.sa_user = dev;
for (signo = MIN_SIGNO; signo <= MAX_SIGNO; signo++)
{
if (nxsig_ismember(&dev->sigmask, signo))
{
nxsig_action(signo, &act, NULL, false);
}
}
return fd;
errout_with_dev:
nxmutex_destroy(&dev->mutex);
kmm_free(dev);
errout:
set_errno(ret);
return ERROR;
}