sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4229881231
nuttx/ReleaseNotes

15604 lines
694 KiB
Plaintext
Raw Blame History

NuttX Release Notes
===================
This file contains are the release notes for the NuttX (and apps) packages
for every release. The text is just as was written at the time of release
(with perhaps some corrected typos). Over the course of time, NuttX has
used several different repositories: CVS, two SVN repositories, and
currently a GIT repository. Therefore, revision information specific to an
older repository may not be meaningful today.
To make it easier to track there older versions in the current GIT
repository, a GIT lightweight tag has been applied for each release. The
tag name is the release name (for example, the release 6.27 has tag name
"nuttx-6.27").
NuttX-0.1.0
-----------
This is the initial. This initial includes the complete NuttX RTOS
with support for the Linux user mode simulation and the TI TMS320C5471
(Arm7) processor. Partial support for the 87C52 is included.
This release has been verified on both the Linux user-mode and C5471
platforms using the test program under examples/ostest. Test results
for the C5471 can be found in arch/c5471/doc/test-results.txt.
This tarball contains a complete CVS snapshot from March 9,2007.
NuttX-0.1.1
-----------
This is the second release of NuttX. This release includes the following.
See the ChangeLog for more detailed description of the changes.
(1) General OS bugfixes (see the ChangeLog for details),
(2) bugfixes for the TI TMS320C5471 (Arm7) platform (see
the ChangeLog)
(3) Complete support for the 87C52. (However, the 87C52
release is not stable enough for general usage).
(4) Added the beginning of a shell call NuttShell (nsh)
This release has been verified on the Linux user-mode platform, the
Spectrum Digital TMS320C5471 EVM, and the PJRC 87C52 development board
using the test program under examples/ostest.
STATUS: The development status remains as ALPHA until further testing
is performed.
This tarball contains a complete CVS snapshot from March 14, 2007.
NuttX-0.1.2
-----------
This is the third release of NuttX. This release is
primarily a bugfix release with minimal new features. See
the ChangeLog for a more detailed description of the
changes.
(1) Several important OS and ARM7 bugfixes,
(2) opendir(), closedir(), readdir(), etc. added
(3) Added C5471 watchdog timer.
(4) Created a shareable, serial driver.
(5) Added 'ls' command to NuttShell (nsh)
(6) Added a test of the round robin scheduler
This release has been verified on the Linux user-mode
platform, the Spectrum Digital TMS320C5471 EVM using the
test program under examples/ostest.
This tarball contains a CVS snapshot from March 19, 2007.
NuttX-0.2.1
-----------
This is the fourth release of NuttX. This release adds adds
support for a new platform, restructures many header files,
and adds a few new features:
(1) Support for Neuros OSD / DM320
(2) Restructuring of header files for better POSIX compliance
(3) Added kill()
(4) Added POSIX timers
(5) bugfixes and documentation updates
This release has been verified on the Linux user-mode
platform, the Spectrum Digital TMS320C5471 EVM, and the
Neuros OSD using the test program under examples/ostest. Because
of the stability of these tests, the project status
has been upgraded to 'beta.'
This tarball contains a complete CVS snapshot from March 22, 2007.
NuttX-0.2.2
------------
This is the fifth release of NuttX. There is no major new
functionality in this release. This release adds support
for new pthread barrier APIs, changes the directory
structure, to better handle different board configurations
using the same processor architecture, and corrects a few
defects.
See the ChangeLog for a complete list of changes.
This release has been verified on the Linux user-mode
platform and the Neuros OSD using the test program under
examples/ostest. There are no known, critical defects but
the project development status remains at 'beta' status
pending further test and evaluation.
This tarball contains a complete CVS snapshot from
March 26, 2007.
NuttX-0.2.3
------------
This is the sixth release of NuttX. This release is
primarily a bugfix release. Numerous problems were fixed
as detailed in the change log. New functionality includes
support for timed message queues.
See the ChangeLog for a complete list of changes.
This release has been verified on the Linux user-mode
platform and the Neuros OSD using the test program under
examples/ostest. The results of the testing is available in
the source tree under configs/ntosd-dm320/doc/test-results.
There are no known, critical defects but the project
development status remains at 'beta' status pending further
test and evaluation.
This tarball contains a complete CVS snapshot from March 29,
2007.
NuttX-0.2.4
------------
This is the 7th release of NuttX. This release is only to roll out
build changes to better support different SoC's that use the same
processor architecture. In particular, the two existing ARM architectures,
c5471 and DM320 were combined into a single ARM directory. This was done
in preparation for an LPC2148 port that is currently in progress. There
is NO new functionality or significant bugfixes in this release.
See the ChangeLog for a complete list of changes.
This release has been verified on the Linux user-mode platform
and the Neuros OSD using the test program under examples/ostest.
The results of the testing is available in the source tree under
configs/ntosd-dm320/doc/test-results and under configs/sim/doc/test-results.
There are no known, critical defects but the project development status
remains at 'beta' status pending further test and evaluation.
This tarball contains a complete CVS snapshot from April 28, 2007.
NuttX-0.2.5
------------
This is the 8th release of NuttX. This release includes:
(1) Several bug fixes
(2) Initial support for FAT filesystems. Testing has not
been exhaustive and some functionality is missing
(mkdir, stat, unlink chmod, and rename functionality is
not yet implemented).
(3) Support for the NXP lpc2148 processor is included but
is untested as of this writing. The current
implementation includes only support for serial console
and timer interrupt.
See the ChangeLog for a complete list of changes.
This release has been verified only on the Linux user-mode
platform.
This tarball contains a complete CVS snapshot from May 19,
2007.
NuttX-0.2.6
-----------
This is the 9th release of NuttX. This is primarily a
bugfix release to correct a number of problems introduced
with the 0.2.5 release. This release does include some FAT
filesystem extensions including unlink(), mkdir(), rmdir(),
rename(), opendir(), closedir(), readdir(), seekdir(),
telldir(), rewindir(). There are some pending FAT changes
that did not make it into this release including stat(),
truncate(), and long file names.
See the ChangeLog for a complete list of changes.
This release has been verified only on the Linux user-mode platform.
This tarball contains a complete CVS snapshot from May 26, 2007.
NuttX-0.2.7
-----------
This is the 10th release of NuttX. This is primarily a bugfix
release to correct a number of problems reported to me (thanks
Didier!). This release does include the final changes complete the
FAT filesystem logic including stat(), statfs(), and non-standard
APIs to manage FAT attributes. At present, FAT long file names and
file truncate() are still not supported.
See the ChangeLog for a complete list of changes.
This release has been verified only on the Linux user-mode platform.
This tarball contains a complete CVS snapshot from June 9, 2007.
NuttX-0.2.8
-----------
This is the 11th release of NuttX. This release:
(1) corrects important bugs in opendir() and realloc()
(2) adds support for environment variables
(3) adds several new C library interfaces
(4) extends several example programs
See the ChangeLog for a complete list of changes.
This release has been verified only on the Linux user-mode platform.
This tarball contains a complete CVS snapshot from July 2, 2007.
NuttX-0.3.0
-----------
This is the 12th release of NuttX. This release includes the initial
integration of a network subsystem and the uIP TCP/IP stack into NuttX
(see http://www.sics.se/~adam/uip/index.php/Main_Page). Also included
is a device driver for the Davicom DM90x0 Ethernet controller.
This integration is very preliminary. Only a small portion of the
network functionality has been integrated and there are a number of
open issues (see the TODO file). The network subsystem is pre-alpha
at this point in time. I expect that it will stabilize and mature
over the next few releases.
The baseline functionality of NuttX continues to mature and remains at
post-beta (as long as the network is not used).
See the ChangeLog for a complete list of changes.
This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver.
This tarball contains a complete CVS snapshot from November 6, 2007.
NuttX-0.3.1
-----------
This is the 13th release of NuttX and the second release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).
Many network-related problems have been fixed and the implementation
has matured significantly. However, the level of network reliability
is probably still at the pre-alpha or early level. It is sufficiently
complete that you may begin to perform some network integration and
is expected to achieve beta level of reliability over the next few
releases.
The baseline functionality of NuttX continues to mature and remains at
post-beta (as long as the network is not used).
See the ChangeLog for a complete list of changes.
This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver.
This tarball contains a complete CVS snapshot from November 19, 2007.
NuttX-0.3.2
-----------
This is the 14th release of NuttX and the 3rd release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).
Many network-related problems have been fixed and the implementation
has matured significantly. This release consists of:
o TCP-related bug-fixes
o TCP performance improvements
o Initial UDP integration
o Initial uIP micro webserver integration
See the ChangeLog for a complete list of changes.
The level of network reliability is at alpha level is expected to
achieve beta level of reliability over the next few releases.
The baseline functionality of NuttX continues to mature and remains at
post-beta.
This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver.
This tarball contains a complete CVS snapshot from November 23, 2007.
NuttX-0.3.3
-----------
This is the 15th release of NuttX and the 4th release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).
Many network-related problems have been fixed and the implementation
has matured significantly. This release consists of:
o TCP-related bug-fixes for disconnecting sockets
o Correction of some TCP read-ahead logic
o TCP performance improvements
o Misc. additions and cleanup (See the ChangeLog for a complete list of
changes).
The level of network reliability is at an early beta release level. The
baseline functionality of NuttX continues to mature and remains at
post-beta. Open network-related issues include only:
o Some minor unimplemented BSD socket functionality,
o Thread safety issues: the same socket cannot be used concurrently on
different threads.
o Pending design changes necessary to support multiple network interfaces.
o IPv6 support is incomplete.
This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver. Any feedback for improving the network
reliability/performance would be greatly appreciated.
This tarball contains a complete CVS snapshot from November 28, 2007.
NuttX-0.3.4
-----------
This is the 16th release of NuttX and the 5th release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).
This release is primarily a bug-fix release. New features include
only:
o TELNET front-end to NSH,
o DHCPC server functionality, and
o C5471 Ethernet driver.
Numerous network related problems were fixed related to DHCPC, UDP
input processing, UDP broadcast, send timeouts, and bad compilation when
uIP is compiled at high levels of optimization.
The level of network reliability is at a strong beta release level. The
baseline functionality of NuttX continues to mature and remains at
post-beta or production level.
Parts of this release were verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 Ethernet driver and other parts on the Spectrum
Digital C5471 EVM using the C5471 Ethernet driver. Any feedback about bugs
or suggestions for improving the network reliability/performance would be
greatly appreciated.
This tarball contains a complete CVS snapshot from December 10, 2007.
NuttX-0.3.5
-----------
This is the 17th release of NuttX this release is primarily a bug-fix
release and intended to synchronize with the current CVS contents. See
the ChangeLog for a detailed list of changes and fixes.
This release were verified only on the Spectrum Digital C5471 EVM using
the C5471 Ethernet driver. Any feedback about bugs or suggestions for
improvement would be greatly appreciated.
This tarball contains a complete CVS snapshot from December 18, 2007.
NuttX-0.3.6
-----------
This is the 18th release of NuttX. This release contains on a few
changes. The primary purpose of this release is to synchronize with
the release of the pascal-0.1.0 add-on package.
This release of NuttX includes the following changes:
* Fixes for use with SDCC compiler
* Added a simulated z80 target (arch/z80)
* Fix deadlock errors when using stdio but with no buffering
* Add support for the add-on Pascal P-Code interpreter (pcode/)
(see the pascal-0.1.0 package)
This release were verified only on the simulated Z80 and and host
simulation targets. As usual, any feedback about bugs or suggestions
for improvement would be greatly appreciated.
This tarball contains a complete CVS snapshot from January 6, 2007.
====
There was an error in the initial 0.3.6 release that prevented
a successful build unless the Pascal add-on was present. The
tarball was patched to include the fix. Make sure that you download
the nuttx-0.3.6.1.tar.gz version to avoid this problem.
NuttX-0.3.7
-----------
This is the 19th release of NuttX. This release includes the
preliminary port of NuttX to the ZiLOG z16f 16-bit microcontroller.
This port was verified using the ZiLOG z16f2800100zcog Development
and the ZiLOG ZDS-II toolchain. See http://www.zilog.com for
further information.
I emphasize that this is a preliminary release of the z16f port and
is only alpha or, perhaps, pre-alpha quality as of this writing.
There are a list of known issues in the TODO file in the root of
the NuttX directory. The overall quality of NuttX (excluding the
z16f port) continues to improve beyond the late beta level.
The z16f port required numerous changes to NuttX to handle:
* NEAR and FAR addressing, and
* Use of a Windows native toolchain in a Cygwin build environment.
In addition to the z16f port, at least one very critical bug was
found and corrected in NuttX: The thread-specific errno value of one
task was being randomly trashed when a different thread exited.
This release were verified on the ZiLOG z16f2800100zcog, Neuros OSD
(ARM9), and the simulation platforms. As usual, any feedback about bugs
or suggestions for improvement would be greatly appreciated.
This tarball contains a complete CVS snapshot from January 31, 2008.
NuttX-0.3.8
-----------
This is the 20th release of NuttX. This is a minor bugfix release.
It corrects a few minor problems, adds a few minor features, and
continues the integration of the ZiLOG Z18F and of the Pascal P-Code
add-on. This release is synchronized with the release of Pascal-0.1.2.
This tarball contains a complete CVS snapshot from February 10, 2008.
NuttX-0.3.9
-----------
This is the 21st release of NuttX. This is a minor future enhancement
release. This release includes support for the ZiLOG Z8Encore! micro-
controller. Also included is the initial framework for support for
the Z80, XTRS platform (http://www.tim-mann.org/xtrs.html).
This released has been verified only on the ZiLOG ZDS-II Z8Encore!
chip simulation.
This tarball contains a complete CVS snapshot from March 9, 2008.
NuttX-0.3.10
------------
This is the 22nd release of NuttX. This is an important bug fix
release. This release incorporates fixes to correct critical list
handling errors in task shutdown logic: One in timer deletion logic
(timer_delete.c) and one in stream logic (lib_init.c). This release
also includes support to ZiLOG EZ80Acclaim microcontroller (EZ80F91
chip) and configurations for the ZiLOG z8f64200100kit (Z8F6423) and
ez80f0910200kitg (EZ80F091) development kit.
NuttX-0.3.11
------------
This is the 23rd release of NuttX. This is another important bugfix
release. This releases fixes several bugs:
* Two POSIX timer bugs: a memory leak as well a fatal sequencing error.
* Several FAT filesystem errors.
* A deadlock that can occur in opendir()
A few new features were also added:
* Support for recursive mutexes
* Added a RAM disk block driver
* The host simulator no longer uses direct Linux system calls and
now also works on Cygwin.
* The OS test was strengthen and now runs as an endurance test
These changes were verified only on the Host simulator under Cygwin.
Please report any errors to me.
This tarball contains a complete CVS snapshot from June 1, 2008.
NuttX-0.3.12
------------
This is the 24th release of NuttX. This release includes some minor
bugfixes as well as a few new features. Bugs fixed include:
* Corrected an error in recursive mutex implementation.
* task_create() was only dup()ing the first three file descriptors.
* Fixed driver open reference counting errors in dup(), dup2(), and exit().
* Fixed error handling logic in fflush().
New features were also added:
* Pipes and pipe() API
* FIFOs and mkfifo() API
* mkfatfs() API can be used to format FAT file systems.
These changes were verified only on the Host simulator under Cygwin.
Please report any errors to me.
This tarball contains a complete CVS snapshot from August 10, 2008.
NuttX-0.3.13
------------
This is the 25th release of NuttX. This release includes some
important bugfixes as well as a few new features. Bugs fixed
include:
* Fixed problems with Cygwin-based console input. NSH now works
with the Cygwin simulator.
* sched_get_priority_max/min returned error on SCHED_RR
* Corrected detection of End-of-File in fgets()
* Fixed an error in opendir() that could cause an assertion to fail
inappropriately.
* Corrected an error in the FAT that caused files opened for writing
with O_APPEND to fail.
* Fix error in getopt() when called with argc==1
* Fix error in stat() when used on the root directory
* Fixed a critical bug that effects the way that environment variables
are shared among pthreads.
* uIP port now supports multi-threaded, concurrent socket access.
So, for example, one thread can be reading from a socket while
another is writing to the socket.
New features were also added:
* New OS APIs: chdir() and getcwd()
* The Nuttx shell (NSH) has been extended in many ways.
- New commands: mkfatfs, mkfifo, sleep, usleep, nice, sh, cd, and pwd
- New memory inspection commands and heap usage commands
- New capabilities:
- Execution of commands in background
- Execution of simple scripts
- Redirection of command output
- Last command status ($?)
- Now supports if-then[-else]-fi construct
- Other features as noted in the ChangeLog.
These changes were verified only on the Host simulator under Cygwin
and under Linux and also on the Neuros OSD (ARM9). Please report
any errors to me.
This tarball contains a complete CVS snapshot from September 1, 2008.
nutt-0.3.14
-----------
This is the 26th release of NuttX. This release includes some
important bugfixes as well as a few new features. Critical bugs
fixed include:
FAT FS:
* Fixed several critical bugs with regard to fat reading and
writing and FAT12 accesses. Basically the FAT FS only worked
with my tiny test files and test cases. A lot of stronger FAT
tested is still needed!
* Fixed another FAT bug in implementation of FAT lseek();
this prohibited correct random access to large files.
Network:
* Corrected a critical bug that may prevent recvfrom from receiving
packets from most remote UDP port numbers.
* Corrected an error in multi-threaded socket handling in send() and
sendto(). Outgoing data could overwrite incoming data.
* Corrected IP checksum calculation in ICMP and UDP message send logic.
* Corrected an error in send() timeout logic.
New features were also added:
Network:
* Added support for application access to ICMP protocol stacks
* Added ping request logic (net/uip).
* Added basic TFTP client logic (netutils/tftpc).
NuttShell (NSH):
* New commands: 'test', '[', 'ping', 'mkrd', 'xd', and TFTP 'get' and 'put'
See the new NuttShell User Guide for additional information.
Other less critical bugs were also fixed and other less important
features were were added. See the ChangeLog for details.
These changes were verified only on the Neuros OSD (ARM9). Please
report any errors to me.
This tarball contains a complete CVS snapshot from September 8, 2008.
nutt-0.3.15
-----------
This is the 27th release of NuttX. This release includes some new features:
* Adds support for the ROMFS filesystem
* ROMFS supports mmap() to provide eXecute In Place (XIP) capability
* NuttShell (NSH) can be configured to use ROMFS to provide a tiny read-only
filesystem with a startup script in /etc.
* Completed the basic port of the NXP LPC2148 on the mcu123.com board.
The basic port includes successful booting, timer interrupts,
serial console, successfully passing the examples/ostest, and a
NuttShell (NSH) configuration.
These changes were verified only on the mcu123.com NXP LPC2148
board. Please report any errors to me.
This tarball contains a complete CVS snapshot from September 20, 2008.
nutt-0.3.16
-----------
This is the 28th release of NuttX. This release includes the first
support for USB in NuttX. A set of USB APIs were added to support
USB device controller drivers and bindings to USB device class
drivers. The form of the interface was inspired by the Linux Gadget APIs.
At present USB device controller drivers are included for:
* The NXP LPC214x. This driver has been verified and is an early alpha
stage in quality.
* TI DM320. Coding for this driver is complete but it is completely
untested as of this release.
A controller-independent class driver is also included for:
* USB serial class device driver (emulates the Prolific PL2303
serial-to-USB adapter). This driver has only been verified with
the Linux host PL2303 driver.
Other new features include:
* Add an option to set aside a separate stack for interrupt
handling (ARM only). This is useful when memory is constrained,
there are multiple tasks, and the interrupt stack requirement
is high (as when USB is enabled).
A few bugs were also fixed:
* Fixed the frequency of system timer interrupts in the NXP LPC214x port
(off by 20x in nuttx-0.3.15)
* Fixed serial driver bugs related to (1) open counts and (2) recognizing
O_NONBLOCK on read.
* Fixed an error in read(); it was not setting the errno on errors returned
from the driver.
These changes were verified only on the mcu123.com NXP LPC2148 board
using with a Linux host. Please report any errors to me.
This tarball contains a complete CVS snapshot from October 10, 2008.
UPDATE
------
This release does not build for the ARM target when USB is disabled.
Here is the fix:
Index: arch/arm/src/common/up_internal.h
===================================================================
RCS file: /cvsroot/nuttx/nuttx/arch/arm/src/common/up_internal.h,v
retrieving revision 1.13
diff -u -r1.13 up_internal.h
--- arch/arm/src/common/up_internal.h 6 Oct 2008 16:20:52 -0000 1.13
+++ arch/arm/src/common/up_internal.h 13 Oct 2008 20:48:21 -0000
@@ -200,7 +200,8 @@
extern void up_usbinitialize(void);
extern void up_usbuninitialize(void);
#else
-# define up_netinitialize()
+# define up_usbinitialize()
+# define up_usbuninitialize()
#endif
#endif /* __ASSEMBLY__ */
NuttX-0.3.17
------------
This is the 29th release of NuttX. This release includes the
additional support for USB in NuttX. The following new features
were added:
* Added support for SPI-based MMC/SD cards (with an SPI driver
for the NXP LPC214x).
* Added USB storage class device side driver (BBB)
* Added an example that demonstrates the USB storage class by
exporting the SPI based MMC/SD card on the NXP LPC214x.
This is an early alpha release of these drivers. At present they
only work with debug features enabled so there are probably some
race conditions that occur only with debug features disabled.
(Anyone out there with a USB analyzer? I would love to know what
is happening.)
Several important bugs were also fixed in the FAT file system, USB
serial driver and NXP LPC214x USB controller driver. (See the ChangeLog
for details.)
These changes were verified only on the mcu123.com NXP LPC2148 board
using a Linux development environment. USB testing was performed
using both a Linux host and a WinXP host. Please report any errors
to me.
This tarball contains a complete CVS snapshot from October 28, 2008.
NuttX-0.3.18
------------
This is the 30th release of NuttX. This release includes two
partially completed ports, several new features, and a couple of
important bug fixes. The two partially completed ports are:
* The STMicro STR71x processor and configuration for the Olimex
STR-P711 board.
* The Hitachi SH-1 using the SH1_LCEVB1 (SH-1/US7032EVB1) board
Progress on these ports is stalled (as detailed in the ChangeLog).
The new features focus primarily on management of block devices and
extensions of the NuttShell (NSH). These include:
* A loop device that converts a file into a block device.
* A block to character (BCH) driver that allow access a block device as
if it were character device.
* Added strcasecmp() and strncasecmp() libc functions.
* Added the 'dd' and 'losetup' commands to NSH. These commands
(along with mkfatfs and mount), give good management of filesystems
on the target.
Several bugs were fixed, the most important of which are:
* Fixed a race condition workaround delay in LPC214X SPI logic.
This was also the cause of some bad MMC/SD performance on that
platform.
* Fixed a recently introduced FAT file system problem: It would
mount a (invalid) FAT file system even if the medium is not formatted!
* Corrected two other important errors in the FAT lseek() implementation:
1 - The sectors-per-cluster value was being reset to "1".
2 - Important lseek logic was omitted when the seek position was zero.
The FAT filesystem has had many bugs fixed in it and, I think, is
now maturing and becoming stable.
These changes were verified only on the mcu123.com NXP LPC2148
board, the Hitachi SH1_LCEVB1 board, and the Linux simulator, all
using a Linux development environment. Please report any errors
to me.
This tarball contains a complete CVS snapshot from November 16, 2008.
NuttX-0.3.19
------------
This is the 31st release of NuttX. This release includes the
following new feature:
* Add poll() and select() APIs that may be used to monitor for
data availability on character devices or TCP/IP sockets.
* Implemented support TCP/IP connection backlog. This allows
select() to wake-up on new connections to a listener socket.
* Added definition of a framebuffer driver and implement framebuffer
drivers for the simulated platform and the TI DM320 (untested
as of the initial check-in).
* Partially developed a graphics framework based on the framebuffer
drivers, however, this will not be ready for use for a few more
releases. Currently this includes only a few color conversion
routines and some rasterizing functions. A tiny windowing system
is under development but not ready for check-in yet.
* Added support for fixed precision math.
* Added support for outgoing multicast packets.
Several bugs were fixed, the most important of which are:
* Fixed an important bug in the TCP/IP buffering logic. When
TCP/IP read-ahead is enabled and not recv() is in-place when a
TCP/IP packet is received, the packet is placed into a read-ahead
buffer. However, the old contents of the read-ahead buffer
were not being cleared and old data would contaminate the newly
received buffer.
* Changed the behavior of the serial driver read. It now returns
data as it is available rather than waiting for the full requested
read size. This makes functions like fgetc() work much more
smoothly.
These changes were verified only on the Neuros OSD (ARM9) using a
Linux development environment. Please report any errors to me.
This tarball contains a complete CVS snapshot from November 26, 2008.
NuttX-0.4.0
-----------
This is the 32nd release of NuttX. This release adds graphics
support and a tiny windowing subsystem. That new graphics subsystem
is documented at http://nuttx.sourceforge.net/NXGraphicsSubsystem.html.
No other substantial changes were made.
These changes were verified only on the NuttX simulation platform
with X11 windows simulating a device framebuffer. Please report any
errors to me.
The version number was bumped up to 0.4.0 in part to reflect the
new graphics subsystem, but also to recognize the NuttX is approaching
complete functionality. In the 0.3.x versions, network support was
added, Pascal P-code runtime support was added, FAT and ROMFS
filesystems were added, MMC/SD and USB device support were added.
There were also numerous extensions to the NuttShell, NuttX APIs,
and architecture ports.
This tarball contains a complete CVS snapshot from December 6, 2008.
NuttX-0.4.1
-----------
This is the 33rd release of NuttX. This is a minor bugfix release.
The primary reason for this release is to correct numerous build
errors that have accumulated for the ZiLOG ZDS-II based targets.
All ZDS-II targets now build correctly (but have not been re-tested).
In addition to platform-specific build failures, this release also
adds the following features which were not tested as of the time
of the release:
* Board support for the ZiLog ez80Acclaim! ez80f910200zco Development Kit
* ZiLOG eZ80F91 EMAC driver
These changes were verified only on the NuttX simulation platform.
Please report any errors to me.
This tarball contains a complete CVS snapshot from February 6, 2009.
NuttX-0.4.2
-----------
This is the 34th release of NuttX. This release adds no new OS
features but does include support for two new architectures:
* ez80Acclaim! Basic support has been integrated and verified
for the ez80f910200zcog-d board (eZ80F91-based). That basic
support includes timer interrupts and serial console. Ongoing
work includes an EMAC driver that should be integrated for the
next release nuttx-0.4.2. eZ80Acclaim! support has been in the
code base for some time, but has only just been integrated due
to toolchain issues.
* Renesas M16C/20. Support for the Renesas SKP16C20 board has
been included in the NuttX source tree. However, as the
eZ80Acclaim!, testing and integration of that port is stalled
due to toolchain issues.
These changes were verified only on the ZiLOG eZ80910200zcog-d
board. Please report any errors to me.
This tarball contains a complete CVS snapshot from February 28, 2009.
NuttX-0.4.3
-----------
This is the 35th release of NuttX. This release one important new
OS feature and corrects and extends the eZ80 port:
* Priority Inheritance. The basic NuttX waiting logic was extended
to support priority inheritance. See the NuttX User Manual for
further information:
http://www.nuttx.org/NuttxUserGuide.html#priorityinheritance.
* ez80Acclaim! Corrected several critical, show-stopping bugs on that
platform including:
- Errors in the serial driver interrupts.
- An error in the eZ80 table.
* eZ80Acclaim!: Completed integration of the eZ80F91 EMAC driver.
These changes were verified only on the ZiLOG eZ80910200zcog-d board
and on Cygwin-based simulation platform in various configurations.
Please report any errors to me.
This tarball contains a complete CVS snapshot from March 13, 2009.
NuttX-0.4.4
-----------
This is the 36th release of NuttX. This release focuses on bugfixes
and extending and verifying certain networking features.
* Important bugs were fixed in NSH, UDP checksum calculation, UDP
bind() behavior for port==0, the eZ80Acclaim! EMAC driver, Z80
interrupt handling, and in the C libraries.
* Testing was extended to further verify the tiny webserver,
DHCPD, wget(), and sendmail.
See the Changelog for a detailed description of these changes.
These changes were verified only on the ZiLOG eZ80910200zcog-d board
using the ZDS-II toolchain in Cygwin-based environment. Please
report any errors to me.
This tarball contains a complete CVS snapshot from March 29, 2009.
NuttX-0.4.5
-----------
This is the 37th release of NuttX. This release focuses on a few new features.
* The basic port for the Freescale ARM920T i.MX1 processor on the
Freescale MX1ADS board. Coding is complete for this port, but
it is has not yet fully integrated
* Extended I2C and SPI interface definitions
* Add basic support for C++ applications. Very simple C++
applications can now be built against NuttX without any external
libraries. At present, only the most primitive C++ programs
are supported, but it is hoped that this support will be extended
in future releases.
See the Changelog for a detailed description of these changes.
This tarball contains a complete CVS snapshot from April 19, 2009.
NuttX-0.4.6
-----------
This is the 38th release of NuttX. The release features support
for the Micromint Eagle-100 development board. This board is based
around, the Luminary LM3S6918 MCU. This is the first ARM Cortex-M3
architecture supported by Nuttx. This initial, basic port includes
timer and serial console with configurations to execute the NuttX
OS test and to run the NuttShell (NSH). Work is still underway on
this port and current plans are to have I2C, SSI, MMC/SD, and and
Ethernet driver in the 0.4.7 release.
Additional work was done on the MXADS i.MX1 port, however, that
work has been set aside until I complete work on the Eagle-100 (I
also need to come up with a 3V power supply).
Other changes in this release include: Extensions to the SPI interface
definition in order to handle 9-bit interfaces to displays. Several
bugs were fixed (see the ChangeLog for a complete list of changes).
This tarball contains a complete CVS snapshot from May 19, 2009.
NuttX-0.4.7
-----------
This is the 39th release of NuttX. This release focuses on cleaning
up and extending the Eagle100/LM3S6918 port released in nuttx-0.4.6
and on improved MMC/SD support. New features include:
* Improved reliably and additional drivers for the Eagle-100 board
(LM3S6918 ARM Cortex-M3). Additional drivers include Ethernet,
SSI, and support for the on-board LEDs and microSD cards.
* The SPI-based MMC/SD driver was extended to support SDHC Version
2.xx cards.
In addition, this release includes several important bugfixes for
the LM3S6918, the LPC2148, the SPI-based MMC/SD driver, and to
FAT32. See the ChangeLog for details of these bugfixes.
This tarball contains a complete CVS snapshot from May 29, 2009.
NuttX-0.4.8
-----------
This is the 40th release of NuttX. This release adds:
* Support for the Olimex STRP711 board. That board is based on
the STMicro STR711 MCU (ARM7TDMI). Integration is complete on
the basic port (boot logic, system time, serial console). Two
configurations have been verified: (1) The board boots and
passes the OS test with console output visible on UART0, and
the NuttShell (NSH) is fully functional with interrupt driven
serial console. An SPI driver is available but untested (because
the Olimex card slot appears to accept only MMC cards; I have
only SD cards). Additional needed: USB and driver, MMC
integration.
* Support for the CodeSourcery and devkitARM Windows-native GNU
toolchains. Makefiles have been modified for the LM3S6918,
LPC2148, and STR711 to support these toolchains under Cygwin.
This tarball contains a complete CVS snapshot from June 13, 2009.
NuttX-0.4.9
-----------
This is the 41st release of NuttX. This release adds:
* Support for a new binary format call NXFLAT that can be used to
execute separately linked programs in place in a file system.
See http://www.nuttx.org/NuttXNxFlat.html.
* Several important bugs were files related to networking and ROMFS.
See the ChangeLog for a complete list.
This tarball contains a complete CVS snapshot from June 26, 2009.
NuttX-0.4.10
-----------
This is the 42nd release of NuttX. This released focused on the
port of Jeff Poskanzer's THTTPD HTTP server (see
http://acme.com/software/thttpd/). As of the 0.4.10 release, that
port is still not fully complete and functional. However, numerous
related bug-fixes and functional additions for THTTPD were added:
* Several new standard C-library functions (fileno, strstr,
strpbrk, fcntl).
* Improved and extended timing APIs (mktime, gmtime, gmtime_r,
gettimeofday, localtime, localtime_r, and strftime)
* Networking enhancements: recvfrom() and accept() now work with
non-blocking sockets.
* NXFLAT extensions (exec)
* Pattern matching logic.
* And miscellaneous bug fixes (see the ChangeLog for details).
This tarball contains a complete CVS snapshot from August 8, 2009.
NuttX-0.4.11
------------
This is the 43rd release of NuttX. This release of NuttX incorporates
the verified port of Jeff Poskanzer's THTTPD HTTP server (see
http://acme.com/software/thttpd/). Many of the key features of
THTTPD have been tested on the Micromint Eagle-100 development board
(Cortex-M3). These tests verify:
* Serving of files from any file system
* Execution of CGI executable. This release supports execution
of NXFLAT executables on a ROMFS file system
(http://www.nuttx.org/NuttXNxFlat.html)
A standard CGI interface is used: Information is pasted to the CGI
program via POST commands and via environment variables. CGI socket
I/O is redirected to stdin and stdout so that the CGI program only
need to printf() to send its content back to the HTTP client.
Another value to this THTTPD integration effort has been that THTTPD
has provided a very good test bed for finding NuttX networking bugs.
Several very critical networking bugs have been fixed with this
0.4.11 release (see the ChangeLog for details). Networking throughput
has also been greatly improved. Anyone using NuttX networking
should consider upgrading to this release.
This tarball contains a complete CVS snapshot from September 16, 2009
NuttX-0.4.12
------------
This is the 44th release of NuttX. This release adds basic support
for the STMicro STM32, Cortex-M3 MCU. The specific port is to the
STMicro STM3210E-EVAL development board based around the STM32F103ZET6
MCU. Some highlights of this port:
* This basic port includes boot-up logic, interrupt driven serial
console, and system timer interrupts.
* Includes a basic STMicro RIDE7 project that can be used to
perform basic STM32 board bring-up (due to RIDE7 size limitations,
it cannot be used for the full NuttX bring-up).
* Working, Tested Configurations: the NuttX OS test and the
NuttShell (NSH) example.
This basic STM32 port will be extended in the 0.4.13 NuttX release.
Functionality needed for complete STM32 support includes: USB
device driver, LCD driver and NX bringup on the development board's
display and MicroSD support. An SPI driver and a DMA support was
included in this 0.4.12 release, but is not yet tested.
This tarball contains a complete CVS snapshot from October 17, 2009
NuttX-0.4.13
------------
This is the 45th release of NuttX. The release extends the support
for the STMicro STM32 microcontroller. Minimal support for the
STM3210E-EVAL development board based around the STM32F103ZET6 MCU
was released in NuttX-0.4.12. This release adds:
* A simple interface definition to support some FLASH, EEPROM,
NVRAM, etc. devices.
* Verified SPI operation using driver for SPI based FLASH parts
M25P64 and M25P128.
* Improved Cortex-M3 context switching. This should improve
context switching performance be 2x in certain cases.
* Added a USB device-side driver for the STM32. This is an early
release of a very complex driver; some bugs are expected.
* The USB driver has been verified against the USB serial device
class driver. There is at least one known outstanding issue
(see the full bug description in the TODO list).
This release also corrects some important bugs in the early STM32 release:
* Fixed several errors the prevented operation of NuttX on an
STM32 development board using USART2 as the serial console.
* Fixed and optimization-dependent race condition in the clock
initialization.
* Fixed a critical bug in the interrupt control logic that could
cause interrupt operations to failed used for interrupts in a
certain range.
This tarball contains a complete CVS snapshot from November 4, 2009
NuttX-4.14
----------
This is the 46th release of NuttX. The release extends the support
for the STMicro STM32 microcontroller. Minimal support for the
STM3210E-EVAL development board based around the STM32F103ZET6 MCU
was released in NuttX-0.4.12 and extended in Nuttx-0.4.13 to include
initial USB support. This completes the STM32F103ZET6 and adds:
New Generic RTOS Features:
* Added generic support that can be included in any block driver
to provide read-ahead buffering and write buffering for improved
driver performance.
* Added a generic worker thread that can used to defer processing
from an interrupt to a task.
* Defined a generic SD/SDIO interface can can be bound to a MMC/SD
or SDIO driver to provide SDIO support.
* Implemented a an SDIO-based MMC/SD driver using this new SDIO
interface.
New STM32 Features:
* Add support to configure an STM32 input GPIO to generate an
EXTI interrupt.
* Added support for buttons on the STM3210E-EVAL board.
* Implemented an STM32 version of the common the SDIO interface.
* Added a configuration to exercise the STM32 with the USB mass
storage device class example.
This release also corrects some important bugs in the early STM32 release:
* Correct error handling in the mount() logic.
* Fixed several STM32 DMA-related issues. Integrated and debugged
STM32 DMA functionality that was added in 0.4.12.
* Fixed several bugs in the STM32 USB device-side driver.
NOTE: This version, 4.14, is equivalent to what would have been
called 0.4.14 to follow 0.4.13. The zero has been eliminated from
the front of the version number to avoid confusion about the state
of development: Some have interpreted the leading zero to mean
that the code is in some way unstable. That was not the intent.
Beginning in January 2010, I will switch to the 2010.nn versioning
as many others have done to avoid such confusion.
This tarball contains a complete CVS snapshot from December 2, 2009
NuttX-5.0
---------
This is 47th release of NuttX and the successor to nuttx-4.14. This
major revision number has been incremented to indicate that an
incompatibility with previous nuttx releases has been introduced.
This version adopts standard fixed width integer names as specified
by the ANSI C99 standard. The core logic of NuttX is older than
that standard and did not conform to it.
If you have applications running on NuttX-4.14, those applications
should continue to build and execute without problem on NuttX-5.0.
However, if you have device drivers or other OS-internal logic, you
will probably have to make some minor changes to your code to use
this version. Below is a summary of those changes:
* If you include sys/types.h to get the non-standard, fixed width
integer types (uint32, uint16, ubyte, etc.), that is no longer
necessary.
* Instead, you will need to include stdint.h where the new fixed
width integer types are defined (uint32_t, uint16_t, uint8_t, etc).
* You will have to change all occurrences of the following types:
uint32 -> uint32_t
uint16 -> uint16_t
ubyte -> uint8_t
uint8 -> uint8_t
sint32 -> int32_t
sint16 -> int16_t
sint8 -> int8_t
* In addition, the non-standard type 'boolean' must replaced with
the standard type 'bool'. The type definition for 'bool' is in
stdbool.h
This change in typing caused small changes to many, many files. It
was verified that all configurations in the release still build
correctly (other than the SDCC-based configurations). Regression
testing was performed on a few configurations, but it is possible
that minor build issues still exist. (If you encounter any, please
let me know and I will help you to fix them.)
In the course of the regression testing, several important bugs
unrelated to the type changes were found and corrected.
* Fixed an important error in the RX FIFO handling logic of the
LM3S6918 Ethernet driver.
* Corrected the handling of TCP sequence numbers in the TCP stack.
* And other less important bugs as detailed in the ChangeLog.
The primary focus of this release was standards compatibility, but
a few new features were added including a (1) Flash Translation
Layer (FTL) that will support filesystems on a FLASH device and (2)
partial ports for the STM32F107VC and HCS12 C9S12NE64 MCUs. Those
ports are very incomplete as of this writing.
This tarball contains a complete CVS snapshot from December 21, 2009
NuttX-5.1
---------
This is the 48th release of NuttX. This release adds support for
two new MCU architectures in various states of development:
* AT91SAM3U (http://www.atmel.com/products/at91/sam3landing.asp?family_id=605)
This release adds support for the SAM3U-EK development board with
the AT91SAM3U4E MCU
(http://www.atmel.com/dyn/products/product_card_mcu.asp?part_id=4562).
As with most NuttX architecture releases, the release will be
rolled out in two parts: A basic port and an extended port.
NuttX-5.1 includes the basic port for the SAM3U-EK board. This
release passes the NuttX OS test and is proven to have a valid
OS implementation. It supports the basic boot-up, serial console
and timer interrupts. A configuration to support the NuttShell
is also included.
The extended port will also include support for SDIO-based SD
cards and USB device (and possible LCD support). These extensions
may or may not happen by the Nuttx 5.2 release as my plate is
kind of full now.
* LPC3131 (http://ics.nxp.com/products/lpc3000/lpc313x.lpc314x.lpc315x/)
This release also adds the complete implementation of the basic
port for the NXP LPC3131 MCU on the Embedded Artists EA3131 board
(http://www.embeddedartists.com/products/kits/lpc3131_kit.php).
That port, unfortunately has stalled due to tools issues. Those
tool issues have been resolved and I am confident that the verified
basic port will be available in NuttX-5.2.
The extended release will follow and should include SDIO-based
SD card support and device USB.
A few additional features and bugfixes of a minor nature were also
incorporated as detailed in the ChangeLog.
NuttX-5.2
---------
This is the 49th release of NuttX. This release completes the
verification of the basic port for the NXP LPC3131 MCU on the
Embedded Artists EA3131 board
(http://www.embeddedartists.com/products/kits/lpc3131_kit.php).
This basic port includes basic boot-up, serial console, and timer
interrupts. This port has been verified on the using the NuttX OS
test and includes a working implementation of the NuttShell (NSH).
An extended release will follow and should include SDIO-based SD
card support and device USB.
NuttX-5.3
---------
This is the 50th release of NuttX. This release support for one new
architecture:
* A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378
development board was contributed by Rommel Marcelo.
And extensions to two existing architectures:
* David Hewson contributed a dual-speed (full/high) USB device-side
driver for the NXP LPC3131 on the Embedded Artists EA3131
development board.
* A DMA driver and a high speed MCI driver for the Atmel AT91SAM3U
are included (but not fully tested in this release).
Two important bugfix was also included:
* An important fix to the USB mass storage driver was contributed
by David Hewson.
* A serious error in the AT91SAM3U PIO handling was fixed.
NuttX-5.4
---------
This is the 51st release of NuttX. This release includes one new,
important extension to th NX graphics system (See
http://www.nuttx.org/NXGraphicsSubsystem.html).
NX was develop a couple years back on hardware that supported only
framebuffer devices, that is, video hardware with video memory
directly converts the memory content to video. However, most MCUs
that NuttX focuses on do not support such video memory; rather,
that typically only support LCDs via parallel or serial interfaces.
This release of NuttX extends NX so that now renders directly to
the LCD device via its serial or parallel interface. No in-memory
copy of the screen memory need be maintained so this solution should
also work in MCUs with very limited SRAM.
This initial release of this feature includes the verified NX
extensions plus a driver for the HX8347, 16-bit parallel LCD. This
LCD supports 16-bit RGB (5:6:5).
NuttX-5.5
---------
This is the 52nd release of NuttX. This release includes one new
port, some new drivers and some important bugfixes:
* NuttX was ported to the Luminary/TI LM3S6965 Ethernet Evaluation
Kit. At present, that port includes an OS test configuration
and a NuttShell (NSH) configuration with Telnet support.
MMC/SD and Networking support are provided but not thoroughly
verified in this release: Current development efforts are focused
on porting the NuttX window system (NX) to work with the
Evaluation Kits OLED display.
* A NuttX Ethernet driver for the Microchip ENC28J60 SPI Ethernet
chip is available in the source tree (but has not yet been fully
verified because I haven't properly connected it to hardware
yet).
* The Olimex STR-P711 NuttX port was extended to support the
ENC28J60 and some new networking configurations were added.
The ENC28J60 has not been tested on the STR-P711, however,
because of hardware issues (I don't think the USB powered board
provides enough power for the ENC28J60 and I don't have the
right wall wart yet).
Along the way, external interrupt support (XTI) was added to
the STMicro STR-P711 port and some important bugs were fixed
in the STR-P711 SPI driver.
* Added (optional) floating point support for printf().
(Contributed by Yolande Cates.)
* Corrected an important UDP reference counting error. It was
not a serious error, but it trigger an assertion was IS a serious
error.
NuttX-5.6
---------
This is the 53rd release of NuttX. This release includes one several
new drivers for existing NuttX ports:
* This port adds support for the RiT displays P14201 4-bpp,
greyscale OLED. 4-bpp greyscale support was integrated into
the NX graphics sub-system and verified using the TI/Luminary
LP3S6965 Ethernet Evaluation Kit.
* The M25Px driver was extended for the M24P1 FLASH part (see NOTE).
* An I2C driver and (basic) SPI driver were added for the NXP
LPC313x port. The I2C interface definition was extended to
efficiently handle multiple I2C transfers.
(Contributed by David Hewson.)
As well as a few, important USB-related bugfixes (See the ChangeLog
for details).
This release also includes the beginnings of a port for the NXP
LPC1768 MCU. However, it is too early for that port to be useful
(stay tuned for a future announce of the availability of the LPC1768
port).
NuttX-5.7
---------
This is the 54th release of NuttX. This release adds basic support
for one new ARM Cortex-M3 architecture:
* Added support for NXP LPC1768 MCU as provided on the Nucleus
2G board from 2G Engineering (http://www.2g-eng.com).
* Some initial files for the LPC17xx family were released in NuttX
5.6, but the first functional release for the NXP LPC1768/Nucleus2G
occurred with NuttX 5.7.
* That initial basic release included timer interrupts and a
serial console and was verified using the NuttX OS test.
* That release includes a verified NuttShell (NSH) configuration
(see the http://www.nuttx.org/NuttShell.html).
* Also included are unverified SPI and USB device drivers.
Further efforts include:
(1) development of a DMA support library
(2) SPI-based MMC/SD support
(3) verification of the USB driver
Watch for announcement of the completed LPC1768 port expected in
NuttX-5.8.
NuttX-5.8
---------
This is the 55th release of NuttX. This includes several important
bugfixes:
* Corrects some interrupt vectoring for the TI/Stellarix LM3S
port
* Correct initialization logic for NXP LPC17xxx NuttX ports:
Power was not being provided to the GPIO module!
* Corrected (but did not verify) implementation of the optional
interrupt stack feature (all Cortex M3 architectures).
* Correct a HardFault in the LPC17xx SSP driver.
Additional minor fixes are also included as detailed in the ChangeLog.
Several new features have been fully developed and included in this
release, but full verification of most of these new features has
been blocked for a variety of issues:
* Added microSD support for the NuttShell (NSH) configuration in
the Nucleus2G LPC1768 port. For reasons that have not yet been
determined, I have not successfully accessed the microSD card
as of this writing.
* Two USB configurations were also added for the Nucleus2G board:
One to support the USB serial device and one for the USB mass
storage device. Some testing of the USB driver was performed,
but full verification is stalled for an OTG style USB cable.
* LEDs now work correctly on the Nucleus2G LPC1768 board.
* The NuttX/uIP networking subsystem now supports IGMPv2 client.
IGMP (Internet Group Multicast Protocol) network "appliances"
to join into multicast groups. Outbound traffic to enter and
leave multicast groups has been verified, but full verification
will require a switch capable of multicast. Issues associated
with the receipt of multicast packets are likely.
NuttX-5.9
---------
This is the 56th release of NuttX. This release is difficult to
categorize; NuttX-5.9 was really released because there were too
many changes accumulating in CVS -- a few important, some unfinished
implementations, and a couple of important bugfixes.
* By far biggest change in this release is the complete implementation
of on-demand paging support. This feature will allow you to
execute large programs on a mass storage device (such as SPI
FLASH) in a small RAM. All of the core on-demand paging logic
was completed (see http://www.nuttx.org/NuttXDemandPaging.html)
and support was implemented for the ARM-9 family. A test
configuration is in place for the NXP LPC3131. It has been
verified that this new logic does not interfere with normal
fixed-page ARM9 operation, but otherwise this new on-demand
paging feature is untested.
* Add support for the CodeSourcery toolchain to the Olimex-lpc2378
port and for the Neuros OSD port.
* The Neuros OSD port has been updated to work with the production
v1.0 OSD (previously it only worked with the development board).
* And some miscellaneous feature enhancements as detailed in the
ChangeLog.
This includes several important bugfixes:
* NXP LPC17xx - Fixed a critical bug in the GPIO configuration
logic: When attempting to set no pull-up or pull-down (floating),
it would, instead, select pull-down.
* TI/Luminary LM3Sxxxx - Fixed:
(1) A logic error in an address table lookup.
(2) GPIO port encoding the limited support to only 8 GPIO ports.
* Corrected the lease time in the DHCPC implementation: It was
not in host byte order.
* And several other less important bugs as documented in the
ChangeLog: Warnings, cornercase compilation problems, etc.
NuttX-5.10
----------
This is the 57th release of NuttX. This release includes a combination
of some new features as well as several bugfixes. New features
include:
* TI/Luminary Stellaris LM3S9B96:
Header file changes contributed by Tiago Maluta.
* TI/Luminary Stellaris LM3S8962:
Header file changes and support for the Stellaris LM3S8962
Ethernet+CAN Evaluation Board contributed by Larry Arnold.
* On-Demand Paging Support:
The basic logic for the On-Demand Paging feature is complete,
implemented for the NXP LPC3131, and partially tested. See
http://www.nuttx.org/NuttXDemandPaging.html. Some additional
test infrastructure will be needed in order to complete the
verification. See configs/ea3131/README.txt for details.
* Two Pass Build Support:
The make system now supports a two pass build where a relocatable,
partially linked object is created on the first pass and that
object is linked with the NuttX libraries to produce the final
executable on the second pass. This two pass build is currently
only used to support the On-Demand paging feature: The first
pass link forces critical logic into the locked text region;
the second pass builds the NuttX executable more-or-less as
normal.
* CONFIG_APP_DIR:
Generalized the way in which applications are built and linked
with NuttX. The new configuration CONFIG_APP_DIR replaces
CONFIG_EXAMPLE. CONFIG_EXAMPLE used to identify the sub-directory
within the NuttX examples/ directory that held the example
application to be built. That made it awkward to configure to
build an application that resides outside of the NuttX examples/
directory. CONFIG_APP_DIR is more general; it can be used to
refer to any directory containing the application to be built.
For people who have their own configurations and/or Makefiles,
you will need to make a couple of changes:
- Replace all occurrences of CONFIG_EXAMPLE=foobar with
CONFIG_APP_DIR=examples/foobar in all of the configuration
files.
- Replace any occurrences of examples/$(CONFIG_EXAMPLE) with
$(CONFIG_APP_DIR)
- Replace any occurrences of lib$(CONFIG_EXAMPLE)$(LIBEXT)
with libapp$(LIBEXT) in your Makefiles.
- Check any other occurrences of CONFIG_EXAMPLE.
* Several bugfixes are included as well as code changes to eliminate
some warnings. See the ChangeLog for details.
NuttX-5.11
----------
This is the 58th release of NuttX. This is a bugfix release.
* One very important bug fixes a race condition that can occur
using semaphores that can be awakened by signals. Under this
particular race condition, a task could hang waiting for a
semaphore.
* Corrections to lm3s8962 port contributed by Larry Arnold. That
port is purported to work correctly with these changes in place.
Plus less critical bugfixes as detailed in the ChangeLog. New features
include:
* A new configuration to support the mbed.org LPC1768 board.
(Contributed by Dave Marples.)
* A driver for the Atmel AT45DB161D 4Mbit SPI FLASH part
NuttX-5.12
----------
This is the 59th release of NuttX. This is a critical bugfix release.
* Fixed an important error in the signal trampoline logic.
Essentially, interrupts are re-enabled while the signal handler
executes, but the logic to re-disable the interrupts before
returning from the signal handler trampoline was missing. Under
certain circumstances, this can cause stack corruption. This
was discovered by David Hewson on an ARM9 platform, but since
the code has been leveraged, the bug has been propagated from
ARM to Cortex-M3, AVR32, M16C, SH1, ZNEO, eZ80, Z8, and Z80 --
almost every architecture. The correction has been incorporated
for all architectures but only verified on a few.
Other notable changes in NuttX-5.12:
* A complete port for the AVR32 (AT32UC3B0256) is incorporated
in the source tree. Testing of this port is underway now. This
release was made before verifying this port in order to get the
important bugfix in place.
* Other miscellaneous bugfix and enhancements as noted in the
ChangeLog.
NuttX-5.13
----------
This is the 60th release of NuttX. Headlines for this release
include:
* AVR32, www.mcuzone.com AVR32DEV1
The port for the www.mcuzone.com AVRDEV1 board based on the
Atmel AT32UC3B0256 MCU was (almost) fully integrated. The port
now successfully passes the NuttX OS test (examples/ostest).
A NuttShell (NSH) configuration is in place (see the NSH User
Guide at http://www.nuttx.org/NuttShell.html). Testing of that
NSH configuration, however, has been postponed (because it got
bumped by the Olimex LPC1766-STK port -- see below)
Current Status: I think I have a hardware problem with my serial
port setup. There is a good chance that the NSH port is complete
and functional, but I am not yet able to demonstrate that. At
present, I get nothing coming in the serial RXD line (probably
because the pins are configured wrong or I have the MAX232
connected wrong).
A complete port will include drivers for additional AVR32 UC3
devices -- like SPI and USB --- and will be available in a
later release, time permitting.
* LPC1766, Olimex LPC1766-STK
Support for the Olimex-LPC1766 is newly added to NuttX and is
still undergoing development, test, and integration. Verified
configurations for the NuttX OS test and for the NuttShell (NSH,
see the NSH User Guide at http://www.nuttx.org/NuttShell.html.
Additional USB configurations are in the release as well, but
they have not yet been verified. Goals for NuttX-5.14 include:
(1) An Ethernet driver, (2) Verified USB support, and (3) SD
card support.
* Additional changes and bugfixes as detailed in the ChangeLog.
NuttX-5.14
----------
The 61st release of NuttX, NuttX-5.14, was made on November 27,
2010. This release includes multiple, important bugfixes as well
as a new driver for the NXP LPC1766.
This release corresponds with SVN release number: r3137
Important bugfixes include:
* Cortex-M3 Hard Fault. Fixed a hard fault problem that can occur
if certain types of interrupts are pending at the time another
interrupt returns. This problem has only been observed on the
LPC1766 (returning from a SYSTICK interrupt with a pending
Ethernet interrupt). However, it is assumed that all Cortex-M3
ports could have this as a latent bug.
* TCP/IP Sequence Number Bug. Corrected errors some important
logic in the way that sequence numbers are managed when send()
sends out packets before a previous packet has been acknowledged.
Some of that send() logic was incompatible with logic in the
uIP layer. Errors seen include: (1) The final final packet in
a sequence of packets might be too large! In the THTTPD example,
this might leave some garbage at the bottom of the display. Or
(2) send() might hang with outstanding, unacknowledged data
(and with no re-transmission requests). This was due to
differences in sequence number handling in send() and in
uip_tcpinput.c; uip_tcpinput.c thought (incorrectly) that all
of the bytes were acknowledged; send.c knew that they were not.
* One-Shot POSIX Timer Bug. Fixed an error in set-up of a one-shot
POSIX timer. It was using the repetitive timer value (which
is zero in the one-shot case), always resulting in a 10Ms timer!
Found and fixed by Wilton Tong.
Additional support has been included for the Olimex-LPC1766. Support
for that board was added to NuttX 5.13. This release extends that
support with an Ethernet driver. Verified configurations are now
available for the NuttX OS test, for the NuttShell (NSH, see
http://www.nuttx.org/NuttShell.html), for the NuttX network test,
and for the THTTPD webserver. (Additional USB configurations are
in the release as well, but those have not yet been verified. Goals
for NuttX-5.15 (and beyond) include: (1) Verified USB support, (2)
SD card support, and (3) LCD support.
NuttX-5.15
----------
The 62nd release of NuttX, NuttX-5.15, was made on December 12,
2010. This release includes several bugfixes as well as feature
enhancements, primarily for the Olimex LPC1766-STK board.
Important bugfixes included:
* Additional fixes needed with the TCP sequence number problem
"fixed" in NuttX-5.14.
* In the send() logic, now checks if the destination IP address
is in the ARP table before sending the packet; an ARP request
will go out instead. This improves behavior, for example, on
the first on the first GET request from a browser
* All USB class drivers need to call DEV_CONNECT() when they are
ready to be enumerated. That is, (1) initially when bound to
the USB driver, and (2) after a USB reset.
* The SPI_SETBITS macro was calling the SPI setmode method.
* And several other bug fixes of lower importance (see the
ChangeLog for details).
And feature enhancements:
* The LPC176x Ethernet driver was using all of AHB SRAM Bank0 for
Ethernet packet buffers (16K). An option was added to limit
the amount of SRAM used for packet buffering and to re-use any
extra Bank0 memory for heap.
* Enabled networking and SD/MMC card support in the Olimex
LPC1766-STK NuttShell (NSH) configuration.
* The LPC176x USB driver is now fully fully functional.
* Added an optional cmddata() method to the SPI interface. Some
devices require an additional out-of-band bit to specify if the
next word sent to the device is a command or data. The cmddata
method provides selection of command or data.
* A driver for the Nokia 6100 LCD (with either the Phillips PCF8833
LCD controller and for the Epson S1D15G10 LCD controller) and
an NX graphics configuration for the Olimex LPC1766-STK have
been added. However, neither the LCD driver nor the NX
configuration have been verified as of the this release.
NuttX-5.16
----------
The 63rd release of NuttX, Version 5.16, was made on January 10,
2010 and is available for download from the SourceForge website.
This release includes initial support for USB host in NuttX. The
USB host infrastructure is new to NuttX. This initial USB host release
is probably only beta quality; it is expected the some bugs remain
in the logic and that the functionality requires extension.
Below is a summary of the NuttX USB host implementation as extracted
from the NuttX Porting Guide:
6.3.9 USB Host-Side Drivers
* include/nuttx/usb/usbhost.h. All structures and APIs needed to
work with USB host-side drivers are provided in this header
file.
* struct usbhost_driver_s. Each USB host controller driver must
implement an instance of struct usbhost_driver_s. This structure
is defined in include/nuttx/usb/usbhost.h. Examples:
arch/arm/src/lpc17xx/lpc17_usbhost.c.
* struct usbhost_class_s. Each USB host class driver must implement
an instance of struct usbhost_class_s. This structure is also
defined in include/nuttx/usb/usbhost.h. Examples:
drivers/usbhost/usbhost_storage.c
* USB Host Class Driver Registry. The NuttX USB host infrastructure
includes a registry. During its initialization, each USB host
class driver must call the interface, usbhost_registerclass()
in order add its interface to the registry. Later, when a USB
device is connected, the USB host controller will look up the
USB host class driver that is needed to support the connected
device in this registry. Examples: drivers/usbhost/usbhost_registry.c,
drivers/usbhost/usbhost_registerclass.c, and
drivers/usbhost/usbhost_findclass.c,
* Detection and Enumeration of Connected Devices. Each USB host
device controller supports two methods that are used to detect
and enumeration newly connected devices (and also detect
disconnected devices):
+ int (*wait)(FAR struct usbhost_driver_s *drvr, bool connected);
Wait for a device to be connected or disconnected.
+ int (*enumerate)(FAR struct usbhost_driver_s *drvr);
Enumerate the connected device. As part of this enumeration
process, the driver will (1) get the device's configuration
descriptor, (2) extract the class ID info from the configuration
descriptor, (3) call usbhost_findclass() to find the class
that supports this device, (4) call the create() method on
the struct usbhost_registry_s interface to get a class instance,
and finally (5) call the connect() method of the struct
usbhost_class_s interface. After that, the class is in charge
of the sequence of operations.
* Binding USB Host-Side Drivers. USB host-side controller drivers
are not normally directly accessed by user code, but are usually
bound to another, higher level USB host class driver. The class
driver exports the standard NuttX device interface so that the
connected USB device can be accessed just as with other, similar,
on-board devices. For example, the USB host mass storage class
driver (drivers/usbhost/usbhost_storage.c) will register a
standard, NuttX block driver interface (like /dev/sda) that can
be used to mount a file system just as with any other other
block driver instance. In general, the binding sequence is:
1. Each USB host class driver includes an initialization entry
point that is called from the application at initialization
time. This driver calls usbhost_registerclass() during this
initialization in order to makes itself available in the
event that the device that it supports is connected. Examples:
The function usbhost_storageinit() in the file
drivers/usbhost/usbhost_storage.c
2. Each application must include a waiter thread thread that
(1) calls the USB host controller driver's wait() to detect
the connection of a device, and then (2) call the USB host
controller driver's enumerate method to bind the registered
USB host class driver to the USB host controller driver.
Examples: The function nsh_waiter() in the file
configs/nucleus2g/src/up_nsh.c and the function nsh_waiter()
in the file configs/olimex-lpc1766stk/src/up_nsh.c.
3. As part of its operation during the binding operation, the
USB host class driver will register an instances of a standard
NuttX driver under the /dev directory. To repeat the above
example, the USB host mass storage class driver
(drivers/usbhost/usbhost_storage.c) will register a standard,
NuttX block driver interface (like /dev/sda) that can be
used to mount a file system just as with any other other
block driver instance. Examples: See the call to
register_blockdriver() in the function usbhost_initvolume()
in the file drivers/usbhost/usbhost_storage.c.
NuttX-5.17
----------
The 64th release of NuttX, Version 5.17, was made on January 19,
2011 and is available for download from the SourceForge website.
This release follows close on the heels of the 5.16 release and
extends the USB host capabilities first introduced in that version.
* The LPC17xx USB host controller driver was extended to (1) add
support for low-speed devices, (2) handle multiple concurrent
transfers on different endpoints (still only one TD per endpoint),
and (3) handle periodic interrupt endpoint types.
* Add a USB host HID keyboard class driver. Now you can connect
a standard USB keyboard to NuttX and receive keyboard input for
an application.
And other changes as detailed in the ChangeLog.
NuttX-5.18
----------
The 65th release of NuttX, Version 5.18, was made on February 27,
2011 and is available for download from the SourceForge website.
This is first release from the new NuttX SVN repository. This
release is made primarily to keep the release tarball in synchronization
with SVN. Many smaller changes have been made as identified in the
ChangeLog. Headlines include:
* Incorporate several important uIP patches -- including the well
known patch to handle missing SYNACK.
* The Freescale mc8s12ne64 port is code complete but testing has
not yet begun due to toolchain issues. Added support for the
Future Electronics Group NE64 Badge board.
* Added support for a new STM32 board, the ISOTEL NetClamps VSN
V1.2 ready2go sensor network platform. This board is based on
a STM32F103RET6 and includes some interesting power saving/clock
control extensions.
* USB host support expanded to handle vendor specific USB devices.
* Incorporated the LUFA HID parser.
* Various bugfix as detailed in the ChangeLog
NuttX-5.19
----------
The 66th release of NuttX, Version 5.19, was made on March 12, 2011
and is available for download from the SourceForge website. This
release includes several new features in various states of integration
and maturity:
* 486SX QEMU port. This port supports the Intel 486SX architecture
using the QEMU simulator. Initial functionality is in place a
partially tested. There are still some outstanding issues with
timer interrupts.
* Platform specific application support. A new apps/ directory
appears in this port. This apps/ directory provides a mechanism
for applications using NuttX to have a highly customized
initialization process. It supports a set of end-user applications
than can be executed (1) standalone so you can have a fully
customized application startup, or (2) on top of NSH. Think
of it this way: In a buckled-up embedded application, your
end-user programs will probably have their own dedicated start-up
logic. But, during development, you might want to have you
applications available and executable from the NSH command line.
This apps/ add-on (and NSH hooks) was contributed by Uros to
accomplish just that.
* NSH was also extended to support application specific ROMFS
/etc/init.d/rcS start-up scripts. This feature, as well, as
all of the above-mentioned apps/ directory support was contributed
by Uros Platise
* Additional NSH improvements and bug fixes. See the Changelog
for details.
* This release also provides a new SLIP network driver. This
driver should support point-to-point network communications to
a host using TCP/IP or UDP. This driver is code complete, but
not tested in this release.
* New RAMTRON FRAM driver (contributed by Uros Platise)
* New generic 16550 UART driver.
* Cortex-M3 Power improvements: Waits for Interrupt (WFI) in idle
loop for reduced power consumption (LPC17xx and STM32 only -
contributed by Uros Platise))
* New waitpid() system interface.
* Additional bugfixes: pipes, stdint.h, STM32 SDIO and SPI drivers
NuttX-6.0
---------
The 67th release of NuttX, Version 6.0, was made on March 21, 2011
and is available for download from the SourceForge website. The
version number of this release was bumped from 5.19 to 6.0. A
change in the major revision number is used to reflect an incompatibility
with previous versions. In this release, the NuttX core OS
functionality has been separated from NuttX application-related
functionality. These are provided as separate tarballs:
* nuttx-6.0.tar.gz, and
* apps-6.0.tar.gz
The purpose of this separation is both to better organize and
modularize the NuttX source tree, but also to provide better support
for incorporation of end-user applications with Nuttx.
The incompatibility results from the changes to the board configuration
logic needed to supported the separable application. The major
changes to the configuration include:
* CONFIG_APPS_DIR - This should not be set. The default is
../apps. This should only be set if you have a custom,
product-specific application directory in some different location.
* appconfig - Each board configuration now requires a new file
called 'appconfig.' As its name suggests, this file provides
new configuration information needed by the logic in ../apps.
In addition to this major reorganization in the directory structure,
this release also includes some important extensions to existing
features and some important bugfixes. These include:
* The SLIP driver was been well debugged and significantly
re-designed. Now you can have an Ethernet connection to you
board even if you have no Ethernet hardware. How cool is that?
* The QEMU i486 port is now functional. It has also been reported
to work on the Bifferboard (see http://bifferos.bizhat.com/).
* And extensions to the uIP driver interface, and
* Bug fixes to fopen() and STM32 GPIO configuration
Please see the ChangeLog for details.
NuttX-6.1
---------
The 68th release of NuttX, Version 6.1, was made on April 10, 2011
and is available for download from the SourceForge website. The
6.0 release introduced a detach-able application environment to
build applications outside of the NuttX source tree. The primary
purpose of this release is to correct numerous build problems
introduced by that architectural change:
* In many newer environments, NuttX produced strange Makefile
errors but built correctly in older environments. A fix provided
by Rafael Noronha was incorporated and is reported to fix those
build problems.
* The apps/ directory build system would not handle Windows-native
toolchains due to obscure path formatting issues.
* And other problems as detailed in the Changelog.
Many additional changes were made in the 6.1 release for another
major architectural change: NuttX will now build as a separately
linked microkernel. In this build option the RTOS builds as a
kernel, applications build separately and interface with kernel via
system calls. Applications run in user mode and kernel logic users
in kernel-mode. This provides a secure environment for NuttX. This
feature is fully coded in NuttX-6.1, but has not been tested due
to higher priority tasks that have arisen.
Related to this change, support for the Cortex-M3 memory protection
unit (MPU) has been integrated with the NuttX kernel build to provide
an even higher level of security.
NOTE: This kernel build is an option; the default build configuration
is still the standard, flat, unsecured RTOS as in previous releases.
Additional new features in this release:
* Support for LPC17xx GPIO interrupts (with much support from
Decio Renno).
* Basic timer support for STM32 (Contributed by Uros Platise)
* A binfs file system. This is a tiny pseudo file system that
lets named applications to be viewed and accessed in NSH under
the /bin directory.
* An I2C-based driver for the LIS331DL MEMS motion sensor.
(Contributed by Uros Platise.)
* A configuration for the Embedded Artists LPCXpresso LPC1768 board.
* The user_initialize() interface has been removed.
And several bugfix associated with SD drivers, opendir(), signed
8-bit types (int8_t), and USB serial device. See the ChangeLog for
details.
NuttX-6.2
---------
The 69th release of NuttX, Version 6.2, was made on May 6, 2011 and
is available for download from the SourceForge website. The 6.2
release includes several new features:
* NXFFS: The obvious new feature is NXFFS, the NuttX wear-leveling
FLASH file system. This new file system is intended to be
small for the MCU usage and has some limitations. No formal
documentation of NXFFS yet exists. See the fs/nxffs/README.txt
file for details (see
http://svn.code.sf.net/p/nuttx/code/trunk/nuttx/fs/nxffs/README.txt?view=log)
* Support for NXP LPCXpresso LPC1768 board on the Embedded
Artists base board. The Code Red toolchain is supported under
either Linux or Windows. Verified configurations include
dhcpd, nsh, nx, ostest, thttpd, and usbstorage.
* Support for the Univision UG-9664HSWAG01 OLED with Solomon
Systech SD1305 LCD controller.
* A new RAM MTD driver with FLASH simulation capability.
* A version.h file is now automatically generated so that C code
can now be version aware.
In addition to these new feature, several important bugfixes are
included in this release correcting problems with dup2(), LPC17xx
GPIO interrupts, LPC17xx UART2/3, the FAT file system, build issues,
and strrch(). See the ChangeLog for more details.
NuttX-6.3
---------
The 70th release of NuttX follows only a nines days after the release
of version 6.2. It was released on May 15, 2011. This special
back-to-back release was made so that the current released version
of NuttX will correspond to the initial release from the RGMP
project.
This release adds architecture support and build configuration for
RGMP. RGMP is a project for running GPOS and RTOS simultaneously
on multi-processor platforms. See
http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further
information about RGMP.
This release also includes support for STM32 FLASH, build improvements,
and initial, incomplete support for the MicroChip PIC32MX MCU. Bug
fixes are included for some build problems, USB host class driver
error handling, NX graphics color mapping, and problems with C
standard I/O buffer flushing. See the ChangeLog for further details.
NuttX-6.4
---------
The 71st release of NuttX, Version 6.4, was made on June 5, 2011
and is available for download from the SourceForge website. The
6.4 release includes several new features:
* A new, full-featured FTP client. This client may be used as a library
for automated FTP or via an FTP client shell. The FTP shell
supports the following commands: cd, chmod, get, help, idle,
login, ls, quit, mkdir, noop, put, pwd, rename, rhelp, rm,
rmdir, size, time, and up. A configuration is available for
the NXP LPC17xx to demonstrate this functionality.
* A functional C1101 wireless driver (contributed by Uros Platise)
* A PCI-based E1000 Ethernet driver (contributed by Yu Qiang)
* New C library functions: inet_addr() (contributed by Yu Qiang),
strndup(), asprintf()
* Reduced memory allocation overhead for MCUs with small heaps (<64K).
* fdopen() now works with socket descriptors allowing standard
buffered C functions to be used for network communications.
* The NSH ifconfig command can now be used to set or change the
IP address (contributed by Yu Qiang)
This release also includes some completed but untested functionality.
* The MicroChip PIC32MX port is now code complete and ready to
begin testing. Unfortunately, testing will be delayed due to
tool issues.
* Support for the NXP LPC315x MCUs.
Additional miscellaneous enhancements and bug fixes to task_delete(),
recvfrom(), and other changes as noted in the ChangeLog.
NuttX-6.5
---------
The 72nd release of NuttX, Version 6.5, was made on June 21, 2011
and is available for download from the SourceForge website. The
6.5 release is all about support for the Atmel 8-bit AVR family.
I have been interested in the AVR family for some time but because
of the severe SRAM constraints and because of the availability of
many tiny schedulers for the AVR, it has not been "on the radar
screen." However, I have recently become interested because of
interest expressed by members of the forum and because of the
availability of newer, larger capacity AVR parts (that I don't have
yet).
This release corresponds with SVN release number: r3730
This release includes support for the following AVR boards. As
with any initial support for new architectures, there are some
incomplete areas and a few caveats that need to be stated. Here
they are, ordered from the least to the most complete:
* SoC Robotics Amber Web Server (ATMega128).
This port of NuttX to the Amber Web Server from SoC Robotics
(http://www.soc-robotics.com/index.htm). Is only partially in
place. The Amber Web Server is based on an Atmel ATMega128
(128K FLASH but only 4K of SRAM).
STATUS: Work on this port has stalled due to toolchain issues. It
is complete, but untested.
* Micropendous 3 AT9USB647
This port of NuttX to the Opendous Micropendous 3 board. The
Micropendous3 may be populated with an AT90USB646, 647, 1286,
or 1287. See http://code.google.com/p/opendous/. I have only
the AT90USB647 version for testing. This version has very
limited memory resources: 64K of FLASH and 4K of SRAM.
STATUS: The basic port was released in NuttX-6.5. This basic
port consists only of a "Hello, World!!" example that demonstrates
initialization of the OS, creation of a simple task, and serial
console output. The tiny SRAM limits what you can do with the
AT90USB647 (see issues below).
* PJRC Teensy++ 2.0 AT9USB1286
This is a port of NuttX to the PJRC Teensy++ 2.0 board. This
board was developed by PJRC (http://pjrc.com/teensy/). The
Teensy++ 2.0 is based on an Atmel AT90USB1286 MCU with 128K
of FLASH and 8K of SRAM; a little more room to move than the
AT90USB647.
STATUS: The basic port was released in NuttX-6.5. This basic
port consists of a "Hello, World!!" example and also slightly
simplified NuttShell (NSH) configuration (see the NSH User Guide
at http://www.nuttx.org/NuttShell.html).
An SPI driver and a USB device driver exist for the AT90USB as
well as a USB mass storage configuration. However, this
configuration is not fully debugged as of the NuttX-6.5 release.
AVR-specific issues. The basic AVR port is solid and biggest issue
for using AVR is its tiny SRAM memory and its Harvard architecture.
Because of the Harvard architecture, constant data that resides to
flash is inaccessible using "normal" memory reads and writes (only
SRAM data can be accessed "normally"). Special AVR instructions
are available for accessing data in FLASH, but these have not been
integrated into the normal, general purpose OS.
Most NuttX test applications are console-oriented with lots of
strings used for printf and debug output. These strings are all
stored in SRAM now due to these data accessing issues and even the
smallest console-oriented applications can quickly fill a 4-8K
memory. So, in order for the AVR port to be useful, one of two
things would need to be done:
1. Don't use console applications that required lots of strings.
The basic AVR port is solid and your typical deeply embedded
application should work fine.
2. Create a special version of printf that knows how to access
strings that reside in FLASH (or EEPROM).
NuttX-6.6
---------
The 73rd release of NuttX, Version 6.6, was made on July 11, 2011
and is available for download from the SourceForge website. The
6.6 release adds several smaller features but is mostly a bugfix
release.
Bugfixes include
* Fixed several NX Graphics bugs: Rendering fonts at >8 bits-per-pixel,
graphics move logic, and display artifacts that appear when a
window is closed.
* Corrections to the USB host mass storage class driver
* STM32 bugfixes: serial driver, GPIO interrupt handling
* LPC17xx: Changes for a success compilation with no console.
* Corrections to the Teensy AT90USB SD driver
* Changes for a clean compilation under the ZDS-II toolchain.
Minor features:
* Add logic to extract printf strings from FLASH (but there are
still printf issues for that target)
* Added a configuration for the Sure Electronics PIC32MX board.
However, higher priority tasks have stopped work on that
configuration.
* Added several new configurations for the STMicro STM3210E-EVAL
board.
* Added support for the STM3210E-EVAL board: (1) LCD in either
landscape or portrait mode, and (2) interrupting buttons.
* Added a configuration option to use different serial ports for
debug and for the NSH serial console (there are some issues
with CR-LF expansion and character echo if NSH is not run on
the console).
* Standardized the button press and button interrupt interfaces
so that they are common across all boards.
* Added a new graphics example that focuses on placing text on
the background while pop-up windows occur. Text should continue
to update normally with or without the popup windows present.
* Added ARM stack checking logic.
See the ChangeLog for a detailed description of these changes.
NuttX-6.7
---------
The 74th release of NuttX, Version 6.7, was made on August 2, 2011
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.7.tar.gz and
apps-6.7.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information). Changes in this release are summarized
below:
* New OS APIs: Add the standard sem_timedwait() interface.
* FAT File System: Adds (optional) support for VFAT long file
names.
* USB: Now the mass storage device can be connected when needed
and disconnected when not needed (or re-connected as a different
kind of device).
* Touchscreen Support: Defined a new NuttX touchscreen interface.
Added a driver for the TI TSC2007 touchscreen controller chip.
* NX Fonts: Add support for multiple fonts; developed a tool to
convert open source fonts into NuttX format; Converted and
installed nine new, high quality fontsets.
* NX Graphics: Add new NX APIs to support drawing of wide lines
in any orientation. Added new low level routines to set
individual pixel more efficiently.
* Build system: Added a export target that will bundle up all
of the NuttX libraries, header files, and the startup object
into an exportable tarball.
* LPC17xx: A CAN driver was contributed by Li Zhuoyi (Lzyy).
* STM32: New NX-related configurations to exercise text and
graphic image displays.
* C Library: Added a fixed precision atan2() math function.
* Bugfixes: Serial RX overrun error, FAT upper/lower NT 8.3 name
handling fixed. FAT directory allocation and initialization
bug. STM32 SDIO DMA race condition bug. eZ80 UART1 serial
driver errors (Paul Osmialowski)
NuttX-6.8
---------
The 75th release of NuttX, Version 6.8, was made on August 19, 2011
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.8.tar.gz and
apps-6.8.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information). Changes in this release are summarized
below:
* NuttX has been ported to run on the Freescale Cortex-M4 "Kinetis"
boards. Two board ports are available for (1) the Kinetis
KwikStik-K40 and (2) the Kinetis TWR-K60N512 tower.
* Support for RGMP 0.3. This version of RGMP now runs on the
OMAP4430 (arm) pandaboard
* LPC17xx CAN driver extended to support both CAN1 and CAN2
(submitted by Li Zhuoy (Lzzy))
* Fixed several critical bugs related to signal handling
initialization and for signals the wake up tasks that are waiting
to send or receive message queues.Both are important. (submitted
by hkwilton).
* drivers/can.c: Fixed a semaphore overflow problem in the CAN
driver (reported by Li Zhouy (Lzzy)).
* Added a new ADC driver infrastructure and TI ADS1255 driver
both developed and submitted by Li Zhouy (Lzzy)).
See the Changelog for additional changes included in this release.
NuttX-6.9
---------
The 76th release of NuttX, Version 6.9, was made on September 11, 2011
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.9.tar.gz and
apps-6.9.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release includes a few new features and several important bug fixes.
The new features (some still incomplete) include:
* Analog Support/ NXP LPC17xx: New DAC sub-system including ADC and DAC
drivers for the LPC17xx. Extensions to the ADS1255 driver.
(Contributed by Li Zhuoyi (Lzyy))
* Power Management: Added a new NuttX power management sub-system for
controlling and coordinating reduced power states. At present, only
verified in a simulation environment.
* I2C Test Tool: A new application was added that can be used to
verify and debug I2C interfaces from the NuttShell (NSH) command
line.
* NuttShell (NSH): In addition to the I2C test tool, a date command
is now supported (if CONFIG_RTC is defined) that can be used to
read and set the RTC.
* NXP LPC17xx: I2C and DAC driver for the NXP LPC17xx family submitted by Li Zhuoyi
(Lzyy)
* Kinetis Cortex-M4: Added a SDHC driver for the Kinetis parts.
Complete debug of the Kinetis SDHC driver was not completed, however,
do to some higher priority tasks that forced me to stop work.
* Other new drivers: Driver for I2C-based at24cxx EEPROM submitted by
Li Zhuoyi (Lzyy); Driver for the LM-75 temperature sensor. Support
for the LM-75 temperature sensor integrated into the SM3210E-EVAL
development board.
* NuttX Graphics (NX): Added new NX interfaces for drawing circles,
both circle outlines and filled circles.
* FLASH: Added a function that accepts the path to a block driver and
then erases the underlying FLASH memory
* Build System: The Make export logic now also tries to track down all
architecture-specific header files and include these in the NuttX
export bundle as well. Various changes and modifications so that
NuttX wil build on FreeBSD using the ASH shell (submitted by Kurt Lidl).
Bugfixes, order roughly on decreasing criticality include:
* STM32 I2C Driver: Add resets, timeout, and other fixes to work
reliably with the I2C tool. Corrected a major error introduced in
NuttX 6.8.
* BCH Driver. Several important bugs (noted by Li Zhuoyi (Lzyy))
were fixed.
* C Library: Fixed errors in gmtime() and gmtime_r() that could lead to
errors in date calculations.
* Timing: Correct an error in the tv_nsec calculation that happens
only config CONFIG_RTC is enabled
* Build System: Use of -print-libgcc-file-name to get path to
libgcc.a might select the wrong libgcc.a if a multilib toolchain
is used
NuttX-6.10
----------
The 77th release of NuttX, Version 6.10, was made on October 6, 2011
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.10.tar.gz and
apps-6.10.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4028
This release includes a few new features and several important bug fixes.
The new features (some still incomplete) include:
* CDC ACM serial class device-side driver
* RTC: Now supports hi-res and lo-res hardware RTC. The lo-res RTC
runs at 1Hz.
* STM32 I2C driver. Now supports faster, polled mode of operation.
Added an I2C trace capability.
* ADS7843E touchscreen driver. As used on the SAM3U-EK development
board.
* AT91SAM3U SPI driver. To support the ADS7843E toucscreen
* X11 Support on simulation target. Build errors in the X11 windows
for the simulated target have been correct. Added support for a
simulated touchscreen on the X11 window (based on mouse inputs).
* System Timer. Added support for a 64-bit system timer.
* TIFF Support. Added a TIFF library (currently used for storing
LCD screen shots).
* LCD Support. Added a test to verify that we read and write correct
to LCD GRAM memory.
* I2C tool. Extended to support to include a verify command and
repititions and auto-address increment for most commands.
* USB terminal example. Line oriented serial bridge connects a host
USB serial terminal to a host UART serial terminal.
* Build System. apps/ Makefile will now include external directories
in the application build.
Bugfixes, order roughly on decreasing criticality include:
* Message Queues. Correct errors in mq_timedsend() and
mq_timedrecieve().
* FAT. Writes that cross sector boundaries, stray write into the FAT,
and a FAT long file name issue
* NXFFS. Added a missed error check. Files cannot be opened for
writing if they are already opened for reading.
* Library: fopen() for append modse was not appending.
* STM32 I2C driver. Correct another conflict between concurrent FSMC
and I2C1 accesses. Fixed some bad error detection logic.
* STM32 SDHC driver. Interrupts were being left disabled.
NuttX-6.11
----------
The 78th release of NuttX, Version 6.11, was made on November 12, 2011
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.11.tar.gz and
apps-6.11.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4090
This release is a maintenance release that includes a few new features
and some important bugfixes. New features include:
* NX Graphics: New interfaces to read from graphics memory
* Drivers: AT24 FLASH driver will now supports clustering of blocks
to achieve a larger, more usable block size for NXFFS.
* STM32: LCD color corrections
* PIC32: Board configuration for the Microchip PIC32 Ethernet Starter kit
(not yet verified), new GPIO support library, button and LED support
for the Sure Electronics PIC32MX board. A lot of progress has been
made on the PIC32 NuttX port, but it is still not ready for prime time.
* NXP LPC3152: Board configuration for the Embedded Artists EA3152.
Bugfixes, order roughly on decreasing criticality include:
* NXFFS: Corrected critical bugs in initialization, some full FLASH handling,
and errors in certain cases where the FLASH is repacked.
* ARM EABI: Fix stack aligment required for passing floating point values.
* Build system: Fix build issues when g++ is used as the compiler.
* NX Graphics: Bitmap error handling, correct RGB color conversion macros,
Error when the background window is released.
* STM32: RTC build fixes, LCD color corrections
* Simulation target: build fixes
* C Library: fclose() return value.
See the change log for more detailed information.
NuttX-6.12
----------
The 79th release of NuttX, Version 6.12, was made on December 6, 2011
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.12.tar.gz and
apps-6.12.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4141
New features in this release include:
* STM32. Basic support added for the STM32 F4 family. Board support
verified for the STMicro STM3250G-EVAL board.
* FAT. Enhanced partition handling.
* SDIO-Based SD Card support. Add support for large (>4Gb) devices
* Graphics. Added four new small sans serif fonts.
* Drivers. Fix a banding problem with the R61580 LCD.
Bugfixes, order roughly on decreasing criticality include:
* FAT. Fix errors in how the first entries in the root directory are
added. Fix errors in FAT date/time handling.
* Signals. Fix bug in certain sig_timedwait() error handling.
* Drivers. Fix cloned errors in poll() handling in several drivers.
* Message Queues. errno was not being set correctly by mq_notify().
* C Library. wchar_t is a built-in type for C++
NuttX-6.13
----------
The 80th release of NuttX, Version 6.13, was made on December 26, 2011
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.13.tar.gz and
apps-6.13.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4231
New features in this release include:
* Drivers. New standard interface for PWM drivers and common
"upper half" PWM driver. Updated the MP25x driver to support
the Macronix MX25 chips (submitted by Mohammad Elwakeel).
* STM32 F1/F4. Added an Ethernet driver, ADC drivers, DAC driver,
PWM driver, CAN driver, F4 RTC driver, F4 DMA support,
logic for saving/restoring F4 FPU registers in context switches.
* STM32 Boards. Added STM3240G-EVAL DHPCD and nettest configuration.
Support for a new STM32 board, the HY-Mini STM32v board, was
contributed by Laurent Latil
* PIC32. The port to the Microchip PIC32MX is finally functional and
reliable. The NuttX PIC32 port has verified configurations for
the OS test and the NuttShell (NSH) both exist.
* Tests: New re-usable tests (in apps/examples) for PWM, ADC, and
CAN loopback. Several existing tests can now be built as NSH built-in
applicaitons (dhcpd, nettest, and all of the new tests).
Bugfixes, order roughly on decreasing criticality include:
* STM32: Correct handling of data overrun conditions. Existing logic
would hang with infinite interrupts when a data overrun occurred.
* DHCPD. Fix several problems using host order address where network
addresses expected (and vice versa).
And several others. See the ChangeLog for more details.
NuttX-6.14
----------
The 81st release of NuttX, Version 6.14, was made on January 15, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.14.tar.gz and
apps-6.14.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4301
New features in this release include:
* Drivers. The upper-half PWM driver will now support a pulse count (as
would be needed to control a stepper motor).
* STM32. The CAN driver has been verified in loopback mode. ADC driver
support for the STM32 F4. Add support for UART4-5 and USART6
(Contributed by Mike Smith). The PWM driver now supports a pulse
count for TIM1 and TIM8. Timer driver now supports the F4's 32-bit
timers (Contributed by Mikhail Bychek)
* STM32F4Discovery. Support for the STM32F4-Discovery board contributed
by Mike Smith.
* STM3240G-EVAL. Add support for user control of LEDs.
* LPC17xx. Add support for loopback mode to CAN driver. CAN TX done
perations are now interrupt driver. Now supports configurable CAN bit
rate.
* LPC1766-STK. Add support for on-board buttons. Add support for user
control of LEDs.
* LM3S. Add support for the LM3S6432S2E on the TI RDK-S2E (Contributed
by Mike Smith)
* PIC32MX. USB device-side driver (needs further testing). A partial
Ethernet driver is also in place.
* Library. Support added for fixed floating point fieldwidths in output
formatting (Contributed by Mikhail Bychek)
* Build. New targets apps_clean and apps_distclean to simplify working
with application diretories.
Bugfixes include:
* Drivers. Fixed a buffer-full test in the upper-half CAN driver.
* STM32. GPIO initialize logic (submitted by Mike Smith). Fix the
debug logic that dumps the GPIO configuration.
* LPC17xxx. Correct an integeter overlow in GPIO interrupt setup
(prevented pins > 15 from being used as interrupt sources). Correct
a value used in GPIO interrupt number range test.
* FAT. Now returns the correct error value when it is unable to
recognize the file system.
* Build. MAC OS build fixes (submitted by Mike Smith)
And several others. See the ChangeLog for more details.
NuttX-6.15
----------
The 82nd release of NuttX, Version 6.15, was made on February 12, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.15.tar.gz and
apps-6.15.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4387
New features and extended functionality:
* General Drivers: Add support for (29-bit) extended CAN IDs. Add an
infrastructure to support battery drivers. Add a driver for MAX17040x
battery "fuel gauge". Add support for Composite USB drivers (in
particular for a CDC/ACM with MSC USB composite driver).
Added a new RAM logging driver. This will allow debug output into
a RAM buffer associated with a character driver at /dev/ramlog.
Added the new command 'dmesg' to NSH that can be used to dump the
current contents of the log. This is useful for systems that do not
have the usual serial console (for example, if you only have a
Telnet console with NSH).
* Networking: Add a lower level, primitive socket interface. Telnet
driver:
A New Telnet daemon was created. It wraps a Telnet session within a
character driver that can serve as a "controlling terminal." The
Telnet session will then be inherited by tasks created from the
Telnet session and the stdin/stdout from the created task will
still go through the same Telnet connection.
* STM32 Drivers. PWM driver pulse count was limited to 128; now is
(essentially) unlimited. Add support for (29-bit) extended CAN IDs.
Add support for I2C3. The SDIO driver is (mostly) verified on the
STM32 F4 platforms.
* LPC17xx Drivers. Extended the CAN driver so that the TSEG1 and TSEG2
bit times can be set via the NuttX configuration. Add support for
(29-bit) extended CAN IDs.
* PIC32 Drivers. The PIC32 Ethernet driver is code complete (but still
untested).
* FTPD. Add a new FTP server daemon. This is based loosely on
the hwport_ftpd library provided by Jaehyuk Cho.
* Library: Add support for on_exit(). Implemented tcsetattr() and
tcgetattr(). Moved the old, too-smart fgets() to a new application
library function called readline(). Dumbed down the original fgets().
Add strcasestr(), avsprintf(), inet_ntop(), and inet_pton().
Add support to enable or disable debug output.
* Build system: Support for building a 32-bit simulation executable on
a 64-bit Linux machine. Correct a dependency issue in the arch/*/src/board
directory.
Bugfixes:
* System: Correct PTHREAD_MUTEX_INITIALIZER
* FAT: Fix an error in the FAT statfs() reported by David Sidrane.
* STM32: Fix clock frequencies for APB2 timers. Correct AFIO register
offset.
* PIC32. Correct GPIOs used for LEDs on the Sure PIC32MX board.
* NSH. Wait for a USB connection if a USB serial class is used to
interface with the host.
Additional bugfixes, name changes, and other differences as detailed in the
ChangeLog.
NuttX-6.16
----------
The 83rd release of NuttX, Version 6.16, was made on March 10, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.16.tar.gz and
apps-6.16.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4475
New features and extended functionality:
* ARMv7M Support: Includes new, streamlined Cortex-M exception
handling provided by Mike Smith. Context switching support for the
Cortex-M4 FPU registers is now provided (in both "lazy" and "non-lazy"
modes)
* General Drivers: Added a generic "upper half" Quadrature Encoder driver.
The USB CDC/ACM serial driver can now be dynamically connnected or
disconnected from the host (programmatically or using NSH commands).
* STM32 Drivers: Added a "lower half" Quadrature Encoder driver.
Verified the STM32 F4 DMA driver; Added F4 DMA support to the existing
STM32 SDIO driver.
* STM32 Board Support. Added support for the STM32 F2 family and
for the STM3220G-EVAL board (contributed by Gary Teravskis).
Support is now included for C++ static constructors (verified using
the Atollic toolchain). Added support for the SRAM available on the
STM3240G-EVAL board.
* PIC32 Drivers. PIC32MX USB (device) driver is now functional.
The PIC32MX Ethernet driver not yet fully verified (and an
unverified SPI driver is also available).
* Networking. Added a lower-level, thread-independent socket layer.
Parts of this layer were created in 6.15 to support the FTPD
controlling terminal; this support has been extended in order
to support an NFS file system (not yet released).
* NuttShell (NSH). NSH will now support a USB serial connection for
the console (such as CDC/ACM). This is useful in environments
where there is no physical serial port on the board.
* Build System. Reorgnaization of networking header files.
Critical Bugfixes. The following bug fixes are considered critical:
* Networking: Fixed a "leak" in the TCP/IP read-ahead buffering logic.
Corrected an error in TCP/IP sequence numbering/ACK logic which
occurred when read-ahead buffering memory is exhausted.
* STM32 Drivers: Fixed an buffer sizing error in the STM32 Ethernet
driver.
Additional Bugfixes: Other important bug fixes are listed below. See
the ChangeLog of a complete, detailed list of bug fixes.
* Networking: Corrected recv()/recvfrom() return value. Added logic to
monitor for loss of connection after a new connection has been
established via accept() (Contributed by Max Nekludov). Add
logic to select() to correctly handle POLLHUP (Contributed by Max
Nekludov)
Additional bugfixes, name changes, and other differences as detailed in the
ChangeLog.
NuttX-6.17
----------
The 84th release of NuttX, Version 6.17, was made on April 14, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.17.tar.gz and
apps-6.17.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4607
New features and extended functionality:
* Networking: Additional low-level, thread-independent socket
interfaces (for NFS client support).
* RTC: Added a new interface call clock_synchronize(). This function
will reload the system time from an RTC and is required when the
system re-awakens from certain deep-sleep modes.
* Graphics: Add NxConsole. This is a character device driver that
wraps an NX window and can be re-directed for stdout. This allows,
for example, a pop-up graphics window that contains a NuttShell (NSH)
session. A test of NxConsole is available at apps/examples/nxconsole.
* Watchdog Drivers: Added an interface definition an "upper half"
driver to support watchdog timers.
* Calypso: Support for TI Calypso-based cellphones (as supported by
the Osmocom-BB project) was contributed by members of the Osmocom-BB
team. This includes configurations for the Compal e88 and e99 phones.
* USB Device Interface: Needed to extend the USB device interface
because there was no mechanism for passing endpoint OUT data that
may need to accompany a setup request.
* STM32 drivers: Added some power management controls for entering
reduced power consumption states. An OTG FS driver was completed
and partially verified (this driver seems to be functional but since
it has been test so lightly, it might better be listed in the
next section "Work in progress").
* PIC32 drivers: The PIC32 Ethernet driver is now stable. The PIC32
USB device controller driver is now functional (but not yet stable).
* PIC32 boards: Added support for the Sure DB-DP11212 PIC32 General
Purpose Demo Board. There is now a PIC32 Starter Kit that
provides NSH only through a Telnet connection.
* Build System: Some header files were moved into include/nuttx.
The goal is to move any non-standard header files to include/nuttx
or include/arch. Moved include/math.h to include/nuttx/math.h;
this file is now only instantiated as the 'system' math.h if
CONFIG_ARCH_MATH_H=y is defined.
* Tools: Added tools/cmpconfig.c, a tool for comparing two
configuration files.
Work in progress. This release includes some partially completed
work that is still not ready for prime time.
* NFS Client: Work is progressing on support for an NFS client
file system. This is a port of the BSD NFS client file system
that is being done by Jose Pablo Rojas V.
* Automated Configuration: Automated configuration based on the
kconfig-frontends tool is being incorporated into the build
system. The configuration is still not complete enough for
general use in this release.
* STM32 Drivers: Added files that will (eventually) hold an STM32
OTG FS host driver. This is still a work in progress.
Bugfixes:
* Networking: Corrected a deadlock that only occurred when
executing the NSH 'ifconfig' command over Telnet.
* File system: Fix incorrect return errno value from read() when
the file is opened write-only.
* Graphics: Fix several compilation errors that have crept into the
multi-user NX server because of lack of use.
* STM32: In order to use CAN2, both CAN1 and CAN2 clocking must be
enabled. Fixed a troublesome bug in the STM32 F4 I2C driver that
resulting in timeouts.
* LPC17xx: Fixes for errors the crept in the LPC17xx DAC logic
Contributed by Lzyy).
* Build System: Reordered the link command line to account for new
versions of libgcc.a that require symbols from the application
(abort()).
NuttX-6.18
----------
The 85th release of NuttX, Version 6.18, was made on May 19, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.18.tar.gz and
apps-6.18.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
The majority of changes in this release are focused on supporting the
synchronized release of NxWM, the NuttX tiny window manager. That
window manager is released as part of the NxWidgets package, but depends
upon many of the changes in this NuttX release.
This release corresponds with SVN release number: r4751
New features and extended functionality:
* Drivers. Added a watchdog timer driver infrastructure. Add general
support for STMicro STMPE811 I/O Expander/touchscreen device.
* STM32. Add support for the STM32 IWDG and WWDG watchodog timers. DMA
now supports cicular buffer mode; serial driver now uses circular
DMA to improve Rx performance (Contributed by Mike Smith).
* STM3240G-EVAL Board. Add support for the LCD and for the STMPE811
I/O Expander as a touchscreen controller.
* PIC32 Boards. Board support for the Mikroelektronika PIC32MX7
Multimedia Board (MMB) and for the Sparkfun UBW32 PIC32 board.
* NX. Framed windows are now draw in three colors instead of just two.
Numerous other extensions needed to support NxWM (see the ChangeLog
for details).
* Library. Add prctl() command that can be used to setting and getting
the names of threads. This (plus several other improvements and bug
fixes) are part of a larger effort to improve task monitoring
capabilities.
Work in progress. This release includes some partially completed
work that is still not ready for prime time.
* NFS Client. Work is progressing on support for an NFS client
file system. This is a port of the BSD NFS client file system
that is being done by Jose Pablo Rojas V.
* Automated Configuration. Automated configuration based on the
kconfig-frontends tool is being incorporated into the build
system. The configuration is still not complete enough for
general use in this release.
* STM32 Drivers. Added files that will (eventually) hold an STM32
OTG FS host driver. This is still a work in progress.
Bugfixes (see the change log for details) :
* sched_setscheduler() return value (Contributed by Richard Cochran).
* stdio. Ignore CONFIG_STDIO_LINEBUFFER if the file was opened in binary mode.
* fopen(). Correct an error in parsing open mode string.
* serial driver. Improved performance be reducing the amount of time
that Rx interrupts are disabled.
* recvfrom(). Fix a compilation problem.
* CDC/ACM device driver. Fix an infinite loop that occurs when the serial
device is unregistered.
* STM32 OTG FS device driver. Numerous fixes and the driver is partially
functional but there are still some issues that become apparent when
debug output is disabled.
* fcntl(). Always returned zero on success; however, some fcntl commands
need to return non-zero values on success.
* graphics: Many multi-use mode fixes added to support NxWM (see the
ChangeLog for details). Auto-raise is temporarily disabled in multi-
user mode because it causes some problems with NxWM.
* on_exit(): Fix compilation errors if CONFIG_SCHED_ONEXIT is enabled.
NuttX-6.19
----------
The 86th release of NuttX, Version 6.19, was made on June 15, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.19.tar.gz and
apps-6.19.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4847
This release features new support for a Network File System (NFS) client.
This feature allows a tiny, embedded MCU to mount a remote file system
exported by an NFS server and then to access the file system as it would
any local file system. Then the tiny MCU can effectively have terabytes
of storage!
This might be useful for data collection, for MCU configuration information,
for software updates, for providing modular, loadable code modes, controlling
a "farm" of MCUs, ... there are many possibilities and opportunities for
innovation!
The NuttShell (NSH) now supports the following command:
nfsmount <server-address> <mount-point> <remote-path>
That command will mount the remote NFS server directory <remote-path> at
<mount-point> on the target machine. <server-address> is the IP address of
the remote server.
The NFS development was the graduation project of Jose Pablo Rojas V. who
is a student at the Instituto Tecnol<6F>gico de Costa Rica (ITCR, or TEC).
A lot of effort went into understanding what a tiny, embedded NFS client should
do and getting the target resource usage to a bare minimum. Only around a
kilobyte or so of memory is required to run the NFS client (and most of that
for I/O buffers). Jose Pablo has spent several months living with NFS and
should be congratulated.
Additional new features and extended functionality:
* Drivers: SSD1289 LCD driver, MIO283QT2 LCD driver
* LM3S: Additional register definition header files (contributed by Max
Neklyudov).
* STM32 Boards: The STM32F4Discovery will now support an SSD1289 LCD,
The STM3220G-EVAL board support is now equivalent to the STM3240G-EVAL
board support.
* PIC32 Boards: The Mikroelektronika PIC32MX7 MMB board port is now
functional, very complete, and stable.
* Graphics: The NxConsole will now take keyboard input from the NX graphics
subsystem. This means that if there are multiple NxConsole windows, only
the top instance that has focus will receive the keyboard input.
* apps/: Add the capability to use an arbitrary USB device as the console
(not necessarily /dev/console). Additional enhancements for USB consoles.
Added the 'mv' command.
Work in progress. This release includes some partially completed
work that is still not ready for prime time.
* Automated Configuration. Automated configuration based on the
kconfig-frontends tool is being incorporated into the build
system. The configuration is still not complete enough for
general use in this release.
* STM32 Drivers. Added files that will (eventually) hold an STM32
OTG FS host driver. This is still a work in progress.
Bugfixes (see the change log for details) :
* General: sleep() and usleep() return values, sig_timedwait() errno setting
on timeout.
* Drivers: STMPE811 touchscreen driver, USB PLC2303, USB CDC/ACM
* STM32: Several USB device controller driver fixes, F4 interrupt priorities
(contributed by Mike Smith).
* Graphics: Keyboard input, fill trapezoid bug
As well as other, less critical bugs (see the ChangeLog for details)
NuttX-6.20
----------
The 87th release of NuttX, Version 6.20, was made on July 12, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.20.tar.gz and
apps-6.20.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r4937
Additional new features and extended functionality:
* Power Management: An evolving power management example is being
created by Diego Sanchez. This effort currently involves on the
STM32 F1 but clearly demonstrates the NuttX power management
system which will automatically drive the system to lower power
usage states due to lack of use.
* Drivers: Added a driver for the SST 25 SPI-based FLASH parts.
* PIC32: Added support for the PIC32MX1 and PIC32MX2 families.
Added support for the microchipOpen and Pinguino toolchains.
* NXP LPC43XX: Added support for the entire LPC43xx family
* PIC32 boards: Added support for the DTX1-4000L "Mirtoo" module
from http://www.dimitech.com/ (PIC32MX2).
* NXP LPC43XX Boards: Added support for NGX LPC4330-Xplorer board.
* NXP LPC17XX Boards: Added support for Micromint Lincoln60 board
(LPC1769).
* LM3S Boards: Add a configuration to support the TI/Stellaris
EKK-LM3S3B96 development board. Contributed by Jose Pablo Rojas V.
* Library: NuttX now supports platform-specific stdarg.h header
files.
Work in progress. This release includes some partially completed
work that is still not ready for prime time.
* Automated Configuration. Automated configuration based on the
kconfig-frontends tool is being incorporated into the build
system. The configuration is still not complete enough for
general use in this release.
* STM32 Drivers. Added files that will (eventually) hold an STM32
OTG FS host driver. This is still a work in progress.
Bugfixes (see the change log for details) :
* PIC32: GPIO output configuration (critical bug)
* STM32: Typos in pin mapping files.
* LM3S: Fixed an optimization related but that caused slow start-up
times if optimization was disabled.
* Library: Fixed signed extension but in all limit.h files
(reported by Lorenz Meier). inet_ntoa compilation failure
on Z80.
As well as other, less critical bugs (see the ChangeLog for details)
NuttX-6.21
----------
The 88th release of NuttX, Version 6.21, was made on August 25, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.21.tar.gz and
apps-6.21.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r5052
Additional new features and extended functionality:
* Core: Add support for multiple registered atexit() functions. Syslog
extended: Now any character driver may be used for the debug logging
device. Mountpoint traversal logic.
* Drivers: Added support for the TI PGA112-7 amplifier/multiplexor.
* LPC43xx: Added clock ramp-up logic to run at 204 MHz
* LPC43xx Drivers: SPIFI block driver, RS-485 support, Minimal termios
support. Framework for USB0 device controller driver.
* LPC17xx Drivers: Minimal termios support
* STM32: Support for STM32 F1 "Value Line" (contributed by Mike Smith).
Add support for STM32 F107 "Connectivity Line" (contributed by Max
Holtzberg).
Clock restart logic needed for recovery from low power modes.
* STM32 Drivers: RTC alarm support. Usable for wakeup from sleep mode,
Minimal serial termios support. USB OTG FS host driver (alpha).
* STM32 Boards: Add power management hooks for the STM32F4Discovery,
Add support for the Olimex STM32-P107 (contributed by Max Holtzberg).
* PIC32: Add support for the Pinguino MIPS toolchain.
* PIC32 Drivers: GPIO driver now supports F1 analog regiaters (ANSEL).
* PIC32 Boards: Add support for the PGA117 on the Mirtoo module.
* Calypso: Add support for the SSD1783 LCD on the Compal E99.
* Library: cfsetispeed(), cfsetospeed(), tcflush(), memchr(), and
memccpy().
* Applications: Port of freemodbus-v1.5.0. Add support for testing
devices with multiple ADC, PWM, and QE devices.
NSH: NSH 'mount' command (with no arguments) will now show mounted
volumes. Add new NSH 'df' command. Extended 'help' support. NSH
now catches the return value from spawned applications (provided
by Mike Smith).
* Build System: mkconfig will not define CONFIG_DRAM_END. A lot of
progress has been made on the automated NuttX configuration logic
(Thanks go to Richard Cochran).
* Documentation: Document ways to customize the behavior of NSH.
Bugfixes (see the change log for details) :
* Serial drivers (all): Fix ioctl return value. Common "upper half"
serial driver will now return with EINTR if a serial wait is
interrupted by a signal.
* FAT: Fix statfs() file name length.
* LPC43xx: Clock configuration.
* STM32: Pinmap fixes, SPI driver re-initialization
* STM32 Boards: Correct and lower SDIO frequency for F2 and f4 boards.
* AVR: C++ build issues.
* PM: Fix a place where interrupts were not be re-enabled.
* Applications: NSH application start-up race conditions.
* Library: Fieldwidth and justification for %s format. Fixed several
issues with presenting floating point numbers. NULL definition
for C++
As well as other, less critical bugs (see the ChangeLog for details)
NuttX-6.22
----------
The 89th release of NuttX, Version 6.22, was made on September 29, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.22.tar.gz and
apps-6.22.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r5206
Note that all SVN information has been stripped from the tarballs. If you
need the SVN configuration, you should check out directly from SVN. Revision
r5206 should equivalent to release 6.22 of NuttX 6.22:
svn checkout -r5206 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Or
svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Additional new features and extended functionality:
* RTOS: Application entry point is no longer user_start, but can be
configured using CONFIG_USER_ENTRYPOINT. NuttX now supports two work
queues: A lower priority work queue (for extended processing) and a
higher priority work queue (for quick, high priority operations).
* Memory Management: Added a new granule-based allocated that can be
used to manage, aligned and quantized DMA memory.
* File System: Add hooks to allocate I/O memory with and external
allocated (need if required by DMA).
* Networking: ENC28J60 driver is (finally) verified.
* Drivers: Add hooks USB device drivers to allocate I/O memory with and
external allocated (need if required by DMA). Driver for the Windbond
SPI FLASH family (W25x16, W25x32, W25x64, and others). ADS7843E driver
extended for TSC2046 and XPT2046 and verified.
* ARMv7-M: Added logic to reset the MCU using the NVIC.
* STM32: Add support for STM32F103VET6.
* STM32 Drivers: Add logic to re-initialize UARTs a second time to
enable DMA (Mike Smith). I2C driver error recovery (Mike Smith).
* STM32 boards: Support for USB host added add to several configurations
(or at least explained in README files). Support for the Shenzhou
STM32F107 board (see www.armjishu.com). Support for M3 Wildfire
STM32F103 board (v2 and v3).
* Build System: Kconfig string de-quoting logic. Remove comments from
defconfig files (Kate). Add tool to create NuttX-style symbol tables.
Numerous changes to configuration logic as needed for the new mconf-based
configuration (much of this from Richard Cochran). Refactor common
Make.defs logic into tools/Config.mk (Richard Cochran).
* Library: Configurable terse output from strerror(). Added perror() (Kate).
Add %n format to sscanf() (Kate).
* Applications: Numerous changes and extensions to the old uIP web server
(from Kate and Max Holtzberg, see the ChangeLog for specific extensions).
UDP network discovery utility (Max Holtzberg). Embeddable Lightweight
XML-RPC Server (http://www.drdobbs.com/web-development/an-embeddable-lightweight-xml-rpc-server/184405364, Max Holtzberg).
Bugfixes (see the change log for details). Some of these are very important
(marked *critical*):
* RTOS: Fixes to priority inheritance logic (*critical*). waitpid()
critical section. Assertion in work_cancel() (Mike Smith). mmap() (Kate).
* FAT File System: Improper Boolean expression caused un-necessary writes
and performance issues (*critical*, Ronen Vainish).
* Networking: Remove an un-necessary delay from recvfrom(). This greatly
improves network performance (*critical*, Max Holtzberg).
* Graphics: NX parameter checking errors.
* Drivers: Fix double release of memory in SDIO-based, MMC/SD driver
(Ronen Vainish).
* LPC17xx: Ethernet driver fixes needed for certain PHYs (Kate).
* AVR: Fix build error (Richard Cochran).
* STM32: USB OTG FS host driver NAKing an retries. Power management
compilation errors (Diego Sanchez). Missing SPI3 remap logic.
* STM32 Drivers: Fix for Ethernet errata for STM32F107 (*critical*).
Ethernet buffer alignment check. Add "kludge" to Ethernet driver to
handle DM9161 PHY which (at least on the Shenzhou board), sometimes
does not come up correctly.
* Applications: THTTPD (Kate). NSH ping when IP address is on a different
network (Darcy Gong).
* Library: fread(), fflush(), fdopen(): Fix error handling logic (Ronen
Vainish). Fix some field-width handling issues in sscanf()
As well as other, less critical bugs (see the ChangeLog for details)
NuttX-6.23
----------
The 90th release of NuttX, Version 6.23, was made on November 5, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.23.tar.gz and
apps-6.23.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r5313
Note that all SVN information has been stripped from the tarballs. If you
need the SVN configuration, you should check out directly from SVN. Revision
r5313 should equivalent to release 6.23 of NuttX 6.23:
svn checkout -r5313 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Or
svn checkout -r5313 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Additional new features and extended functionality:
* RTOS: If both atexit() and on_exit() are enabled, use on_exit() to
implement atexit(). Updates for RGMP 4.0.
* Binfmt: Add support for loading and executing ELF binary modules from
a file system.
* Drivers: Maxim MAX11802 touchscreen controller (Petteri Aimonen)
* STM32 Driver: Implementation of /dev/random using the STM32 Random Number
Generator (RNG).
* STM32 Boards: ADC support for the Shenzhou IV board. Relay support for
the Shenzhou IV board.
* C Library: Support is now included for the add-on uClibc++ C++
standard library support. This includes support for iostreams, strings,
STL, RTTI, exceptions -- the complete C++ environment. (uClibc++ is
provided as a separate add-on package due to licensing issues).
Optimized generic and ARM-specific memcpy() function. Optimized
memset() function.
Add support for ferror(), feof(), and clearerror(). Add support for
__cxa_atexit().
Math Library: Port of the math library from Rhombus OS by Nick Johnson
(Darcy Gong).
* Applications: New NSH commands: ifup, ifdown, urlencode, urldecode,
base64enc, bas64dec, md5 (Darcy Gong). Add support for NSH telnet login
(Darcy Gong). Enancements to NSH ping command to support pinging hosts
with very long round-trip times. Extensions to the ifconfig command
Darcy Gong),
Many extensions to the webclient/wget and DNS resolver logic from Darcy
Gong. JSON, Base64, URL encoding, and MD5 libraries contributed by Darcy
Gong.
New examples: ELF loader, JSON, wgetjson, cxxtest, relays.
Bugfixes (see the change log for details). Some of these are very important
(marked *critical*):
* Drivers: W25 SPI FLASH
* STM32 Drivers: ADC reset
* Graphics: Missing implementation of the blocked method (*critical*,
Petteri Aimonen).
* C Library: Floating point numbers in printf and related formatting functions
(Mike Smith), cf[get|set]speed() (Mike Smith)
As well as other, less critical bugs (see the ChangeLog for details)
NuttX-6.24
----------
The 91st release of NuttX, Version 6.24, was made on December 20, 2012,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.24.tar.gz and
apps-6.24.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r5447
Note that all SVN information has been stripped from the tarballs. If you
need the SVN configuration information, you should check out directly from
SVN. Revision r5447 should equivalent to release 6.24 of NuttX 6.24:
svn checkout -r5447 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Or (HTTP):
svn checkout -r5447 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Additional new features and extended functionality:
* RTOS:
- Implemented the POSIX pause() function (still has some compiance
issues).
- Tasking logic is extended to support the notion of address
environments. An address environment is the key notion underlying
"process" vs. tasks. If tasks are created with address environments
(by binfmt), the OS will propogate that environment to child threads
and will destroy the address environment when the "process" exists.
- If support for the PATH variable is enabled, the OS start up logic
will create an initial environment containing the default PATH
setting (CONFIG_PATH_INITIAL). This initial PATH will then be
inherited by all tasks.
* Binfmt
- The NuttX binary loaders have been updated to support the PATH
environment variable. Now, if the PATH is properly defined, programs
can be executed from mass storage using only the file name. This
feature is added to support more standard behavior (eventually, NSH
will support execution of programs in file systems by just entering
the file name, perhaps in 6.25?).
- The NXFLAT and ELF binary loaders have been extended to create
address environments for any new tasks executed from the file system.
This feature requires that the architecture support a memory management
unit (MMU) and the address environment interfaces declared in
include/nuttx/arch.h (currently, this is only supported by the z180).
* Drivers: LCD driver for the Univision UG-2864AMBAG01 OLED
* STM32: Support for STM32F100 high density chips contributed by Freddie
Chopin.
* STM32 Drivers: Added optional RS-485 direction bit control (from
Freddie Chopin).
* STM32 Boards:
- Support for generic STM32F100RC board contributed by Freddie Chopin.
- stm32f4discovery/nxlines: STM32F4Discovery support for the
UG-2864AMBAG01 OLED.
- stm32f4discovery/winbuild: A version of the NuttX OS test
configured to build natively on Windows.
- stm32f4discovery/elf: Now uses the PATH variable to find ELF
executables.
- configs/cloudctrl: Added for Darcy Gong's CloudController board
* PIC32 Boards: Update the Mirtool configuration for Release 2 of the
Mirtoo module.
* Calypso: Add Calypso keypad driver. From Denis Cariki.
* ZiLOG:
- Add support for the z180 chip family and, specifically, for
the P112 retro hardware (see http://p112.feedle.net/).
- All ZiLOG configurations updated to use the current ZDS-II
and/or SDCC toolchains.
* Graphics:
- Add a semaphore handshake so that operations on buffers from
the NXMU client will be blocked until the NX server operates on the
buffer data (from Petteri Aimonen).
- nxtk_subwindowmove() and nxtk_getwindow(): Improvements to clipping
logic from Petteri Aimonen.
* C Library: lib/ sub-directory renamed libc/ (there is a new lib/ sub-
directory that is used to hold all archives).
* C++: Exception stubs from Petteri Aimonen.
* Applications:
- Add NSH hexdump command to dump the contents of a file (or character
device) to the console (contributed by Petteri Aimonen).
- Extend the NSH ifconfig command plus various DHCPC improvements
(from Darcy Gong).
* apps/examples:
- ostest: Replace large tables with algorithmic prime number
generation. This allows the roundrobin test to run on platforms
with minimal SRAM (Freddie Chopin).
- keypadtest: A new keypad test example contributed by Denis Carikli.
- elf and nxflat: If CONFIG_BINFMT_EXEPATH is defined, these examples
will now use a relative path to the program and expect the binfmt/
logic to find the absolute path to the program using the PATH
variable.
* Build system:
- New top-level Makefiles: Makefile.unix and Makefile.win (along with
numerous changes to other make-related files). This adds basic
support for building NuttX natively under Windows from a CMD.exe
window (rather than in a POSIX-like environment). This build: (1)
Uses all Windows style paths, (2) Uses primarily Windows batch
commands from cmd.exe, with (3) a few extensions from GNUWin32.
This capability should still be considered a work in progress
because: (1) it has not been verfied on all targets and tools,
and (2) still lacks some of the creature-comforts of the more
mature environments (like a function configure.sh script and
'make menuconfig' support).
- Example Windows native builds for STM32F4Discovery, eZ80, z16f, z8,
Z80, and Z180.
- Several configurations have been converted to work the kconfig-
frontends mconf configuration tool: stm32f4discovery/nxlines, and
all eZ80, z16f, z8, Z80, and Z180 configurations.
- Architectures now include a common Toolchain.defs file that can be
used to manage toolchains in a more configurable way (most of this
contributed by Mike Smith).
* Build tools:
- Renamed tools/winlink.sh to tools/copydir.sh.
- Several new tools/scripts to support the Windows native build:
tools/mkdeps.bat, tools/mkdeps.c, tools/link.bat, unlink.bat, and
copydir.bat.
- tools/incdir.sh and incdir.bat now support an -s option to generate
system header file paths.
- tools/b16.c: Fixed precision math conversion utility.
Bugfixes (see the change log for details). Some of these are very important
(marked *critical*):
* RTOS: Fix some backward conditional compilation in the work queue
logic (Freddie Chopin).
* File System: Uninitialized variable caused assertions (from Lorenz
Meier).
* Drivers: Partial fix for STM32 OTGFS device drivers and fix for short,
unaligned writes in the flash translation layer (drivers/mtd/ftl.c),
both from Petteri Aimonen.
* STM32 Drivers:
- Qencoder driver and TIM3 driver fixes from Ryan Sundberg.
- Fix timeout delay calculation in the STM32 OTG FS host driver.
* LPC17xx Drivers: Resources not being properly released when I2C
driver is un-initialized.
* Graphics:
- Fix logic when the mouse drags outside of the window; fix
another "blocked message" handling case (both from Petteri Aimonen).
- nxtk_filltrapwindow(): Correct an offset problem (also from Peterri
Aimonen).
- nxglib_splitline(): Correct the "fat flat line" bug.
* C Library:
- nrand() changes to prevent coefficients from becoming zero which
would "lock up" the random number generate.
- Add rounding functions to the math library (contributed by Petteri
Aimonen).
* Build system: Changes to MIN definitions in all limit.h header files
to avoid integer overflows. For example from (-128) to (-127 - 1)
(from Petteri Aimonen).
* Applications: Modbus fixes from Freddie Chopin.
As well as other, less critical bugs (see the ChangeLog for details)
NuttX-6.25
----------
The 92nd release of NuttX, Version 6.25, was made on February 1, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.25.tar.gz and
apps-6.25.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r5595
Note that all SVN information has been stripped from the tarballs. If you
need the SVN configuration information, you should check out directly from
SVN. Revision r5595 should equivalent to release 6.25 of NuttX:
svn checkout -r5595 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Or (HTTP):
svn checkout -r5595 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Additional new features and extended functionality:
* OS Initialization
- Removed support for CONFIG_BUILTIN_APP_START. This is not really a
useful feature and creates a violation of the OS layered
architecture.
* Task Creation:
- Implement a simple vfork(). In NuttX-6.25, this interface is
available only for ARM7/9, ARMv7-M (Cortext-M3/4), and MIPS32
(PIC32MX) platforms.
- exec() now sets the priority of the new task to the same priority as
the parent task (instead of the arbirtrary value of 50).
- New, partially complient implementations of execv() and execl().
These are only partially compliant because they do not overlay any
existing "process space" but rather create the new task and exit().
- Add a complete implementation of posix_spawn(). This standard
interface is a better match for an MMU-less architecture than are
vfork() plus execv() or execl().
- Add a task start hook that will be called before the task main
is started. This can be used, for example, to schedule C++
static constructors to run automatically in the context of the
new task.
* Task Parentage
- Repartitioned tasking data structures. All shared resources are now
collected together in a "task group". A task group includes the
original task plus all of the pthreads created by the task.
- Added support for remember the parent "task group" when a new task is
started.
- Added optional support to record the membership of each thread in
the "task group".
- Implement support for retaining child task status in the "task group"
after the child task exists. This is behavior required by POSIX.
But in NuttX is only enabled with CONFIG_SCHED_HAVE_PARENT and
CONFIG_SCHED_CHILD_STATUS
- Add internal logic to "reparent" a task. This is useful,
for example, where the child task is created through a trampoline
task that redirects I/O. Reparenting allows the caller of posix_spawn()
to be reparented for the eventual child thread.
- Added support for SIGCHLD. Sent to all members of the parent task
group when the file member of the child task group exits.
- If SIGCHLD and retention of child task exist status are enabled, then
a more spec-compliant version of waitpid() is enabled.
- New interfaces waitid() and wait() are also enabled when SIGCHLD
is enabled.
* File System
- dup() and dup2() can new be used with opened files in a mounted file
system. This supports re-direction of output in NSH to files.
- The binfs file system was moved from apps/builtin to fs/binfs. The
binfs file system was extended to support execution of "builtin
applications" using exec(), execv(), execl(), or posix_spawn().
- Added logic based on SIGCHLD to automatically unload and clean-up
after running a task that was loaded into memory.
* Binary Formats
- Much of the logic for "builtin applications" was moved from
apps/builtin to nuttx/binfmt/libbuiltin. Includes some extensions
contributed by Mike Smith.
- A binary loader was added for builtin applications to support
execution of "builtin applications" using exec(), execv(),
execl(), or posix_spawn().
* Drivers:
- Added logic to marshal and serialized "out-of-band" keyboard
commands (such as cursor controls and key release events) intermixed
with normal ASCII keypress data. The encoding is partially integrated
in the HID keyboard driver and the decoding full integrated into the
apps/examples hidkbd and keypadtest (the latter contributed by Denis
Carlikli).
- Driver for the UG-2864HSWEG01 OLED contributed by Darcy Gong.
- Add support for removable serial devices (like USB serial). This
support is enabled by CONFIG_SERIAL_REMOVABLE.
* ARMv7-M:
- Added an option to use the BASEPRI register to disable interrupts
(instead of the PRIMASK). This eliminates some innocuous hardfaults
that interfere with some debug tools. You need to switch to the
BASEPRI method only if you have such tool interference.
* STM32 Drivers
- Bring STM32 F1 DMA capabilities up to par with the STM32 F2/F4
(contributed by Mike Smith).
- Add support for USART single wire mode (Contributed by the PX4
team).
- Updates to support for SPI DMA on the STM32 F1/F2/F4. From
Petteri Aimonen.
* STM32 Boards:
- New configuration to support the UG-2864HSWEG01 OLED on the
STM32F4Discovery board.
- Added a posix_spawn() test configuration for the STM32F4Discovery.
* LM3S/LM4F
- Files and directories repartitioned to support both LM3S and LM4F
using the STM32 organization as a model.
- Partial definitions for the LM4F contributed by Jose Pablo Carballo
(this is still a work in progress).
* LM3S Boards
- Added scripts and documentation to use OpenOCD with the LM3S (from
Jose Pablo Carballo).
* LPC176x/LPC178x
- Files and directories repartitioned to support both LPC175x/LPC176x
and the LPC177x/LPC178x families using the STM32 organization as a
model. The LPC1788 port is a work in progress by Rommel Marcelo.
* LPC176x/LPC178x Boards:
- Added a configuration to support the Wave Share Open1788 board.
This is still a work in progress by Rommel Marcelo.
* LPC2148 Boards:
- Add basic support for the The0.net ZP213x/4xPA board (with the LPC2148
and the UG_2864AMBAG01 OLED).
- Add an nxlines configuration for the ZP213x/4xPA (with the LPC2148
and the UG_2864AMBAG01).
* Simulator:
- Add an nxlines configuration for the simulator.
* Networking:
- Add logic to work around delayed ACKs by splitting packets
(contributed by Yan T.).
- Split net_poll() to create the internal interface psock_poll().
* LCDs:
- Added support for LCD1602 alphanumeric LCD (HD4468OU controller).
* Graphics:
- Added 5x8 monospace font. This tiny font is useful for graph
labels and for small bitmapped display. Contributed by Petteri
Aimonen.
* Build System:
- Add an options to better manage toolchain prefixes.
- Redesigned how the context targer works in the apps/ directory.
The old design caused lots of problems when changing configurations
because there is no easy way to get the system to rebuild the
context. This change should solve most the problems and eliminate
questions like "Why don't I see my builtin application in NSH?"
* Kconfig Files:
- There are several new configurations that use the kconfig-frontends
tools and several older configurations that have been converted to
use these tools. There is still a long way to go before the conversion
is complete:
configs/sim/nxwm
configs/sim/nsh
configs/stm3220g-eval/nxwm
configs/stm32f4discovery/posix_spawn
configs/olimex-lpc1766stk/nsh
configs/olimex-lpc1766stk/hidkbd
configs/olimex-lpc1766stk/nettest
configs/open1788/ostest
configs/stm32f4discovery/nsh
configs/stm32f4discovery/usbnsh
configs/lm326965-ek (all configurations)
configs/mcu123-214x/nsh
configs/ubw32/ostest
* Tools:
- tools/kconfig.bat: Kludge to run kconfig-frontends from a DOS shell.
- tools/configure.c: configure.c can be used to build a work-alike
program as a replacement for configure.sh. This work-alike
program would be used in environments that do not support Bash
scripting (such as the Windows native environment).
- tools/configure.bat: configure.bat is a small Windows batch
file that can be used as a replacement for configure.sh in a
Windows native environment. configure.bat is actually just a
thin layer that executes configure.exe if it is available. If
configure.exe is not available, then configure.bat will attempt
to build it first.
* Applications:
- New and modified examples:
apps/examples/wlan: Remove non-functional example.
apps/examples/ostest: Added a test of vfork(). Extend signal
handler test to catch death-of-child signals (SIGCHLD). Add a
test for waitpid(), waitid(), and wait().
apps/exampes/posix_spawn: Added a test of posix_spawn().
- NSH:
NSH now supports re-direction of I/O to files (but still not from).
The block driver source argument to the mount command is now
optional for file systems that do not require a block driver.
NSH can now execute a program from a file system using posix_spawn().
Added support for a login script. The init.d/rcS script will be
executed once when NSH starts; the .nshrc script will be executed
for each session: Once for serial, once for each USB connection,
once for each Telnet session.
- Supports a new daemon that can be used to monitor USB trace outpout.
- Removed non-functional wlan example.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Tasking:
- Fixed a *critical* task exit bug. Here is the failure scenario:
(1) sched_lock() is called increments the lockcount on the current
TCB (i.e., the one at the head of the ready to run list), (2)
sched_mergepending is called which may change the task at the head
of the ready-to-run list, then (3) sched_unlock() is called which
decrements the lockcount on the wrong TCB. The failure case that
I saw was that pre-emption got disabled in the IDLE thread, locking
up the whole system.
* Signals:
- sigtimedwait() would return a bad signal number if the signal was
already pending when the function was called.
* Drivers:
- Some SD cards will appear busy until switched to SPI mode for
first time. Having a pull-up resistor on MISO may avoid this
problem, but this fix from Petteri Aimonen makes it work also
without pull-up.
* STM32 Drivers:
- STM32 FLASH driver counting error (from Freddie Chopin).
- STM32 F4 maximum SPI frequency was wrong (corrected by Petteri
Aimonen).
* STM32 Boards
- Due to cloning of untested code, the logic to control on-board
LEDs did not work on any STM32 boards.
- Serial devices number /dev/ttyS0-5 is there is a serial console,
but /dev/ttyS1-6 if there is no serial console.
* Binary Formats
- C++ static constructors execute now using a start taskhook
so that they execute in the context of the child task (instead
of in the context of the parent task).
* File Systems:
- Several FAT-related bugs fixed by Petteri Aimonen.
* Networking:
- Fix poll/select issure reported by Qiang: poll_interrupt() must call
net_lostconnection() when a loss of connection is reported. Otherwise,
the system will not remember that the connection has been lost and will
hang waiting on a unconnected socket later.
- Similar issues corrected for recvfrom() and send().
- Telnetd would hang in a loop if recv() ever returned a value <= 0.
* Libraries:
- fread() could hang on certain error conditions.
- Can't handle SYSLOG output to a character device from the IDLE task
(because the IDLE task can't block).
* Build System:
- Serial was driver was not being built if there is no console
device. Obviously, the serial driver may be needed even in
this case.
* Additional Bugfixes:
- sig_timedwait() and clock_time2ticks.c: Timing "rounding" logic
- ARM9 Compilation issue with low vectors.
- readline() return value
- Others as detailed in the ChangeLog: HID keyboard, LPC17xx bit
definitions, strndup(), PL2303, SYSLOG error handling, AT25,
apps/examples.
NuttX-6.26
----------
The 93rd release of NuttX, Version 6.26, was made on March 15, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.26.tar.gz and
apps-6.26.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release corresponds with SVN release number: r5745
Note that all SVN information has been stripped from the tarballs. If you
need the SVN configuration information, you should check out directly from
SVN. Revision r5745 should equivalent to release 6.26 of NuttX:
svn checkout -r5745 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Or (HTTP):
svn checkout -r5745 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Additional new features and extended functionality:
* OS Initialization:
- Add an additional call-out to support board-specific driver
initialization during the boot-up phase (available with
CONFIG_BOARD_INITIALIZE=y).
* Tasking:
- New interface task_spawn() that is like posix_spawn(), but uses
entry point addresses like task_create().
- Additional data restructuring as a continuation of the task group
changes of NuttX 6.25. These data structures were moved from the
TCB structure into the task group: pthread join data,
atexit/on_exit callbacks, waitpid data structures, and message
queues.
- TCBs for tasks and pthreads are now separate structures. This
saves a little memory since tasks do not have to carry the overhead
for threads and vice versa.
* Kernel Build:
- Extensive changes were made to support the kernel build mode. In
this mode, NuttX is built as a monolithic kernel. NuttX is built
as a separate kernel mode "blob" and the applications are built
as a separate user mode "blob". The kernel runs in kernel mode and
the applications run in user mode (with the MPU restricting user
mode accesses). Access to the kernel from the user blob is only
via system calls (SVCalls).
- Extensive changes were made to the syscall, SVCall, and trapping
logic. Many internal interfaces were renamed.
- The memory manager was extended to support both kernel- and user-
mode allocations. Logic within the kernel needs to use the
correct kernel- or user-space allocator, depending upon the user
of the allocated memory.
- The user-space blob now contains a header built in at the beginning
of the block that provides the same information that was previously
provided by a kludgy, auto-generated header file (user_map.h).
- Basic support implemented for the ARMv7-M family with fragments
also implemetned for the ARMv6-M and MIPS32 families.
- Kernel build supported added for the LPC17xx Open1788 and for
the Atmel SAM3U-EK board. All testing is being performed on the
Open1788 board.
* Signals:
- Delivery of signals to threads within a task group is now compatible
with the way that signals are delivered to threads within a process.
* Drivers:
- Add a driver for the SST29VF NOR FLASH parts.
- USB device trace/debug feature extended to decode device-specific
trace events to make the trace output more readable (from Petteri
Aimonen).
- USB MSC device driver can not support names of differing sizes
in the USB descriptor and the SCSI fields (from Petteri Aimonen).
- Locking added to MMC/SD SPI drivers so that MMC/SD can co-exist on
the same bus as other SPI devices. Frequency is reset each time
that the MMC/SD SPI has the bus locked. (from Petteri Aimonen).
* ARMv6-M (Cortex-M0):
- Added support for the ARM Cortex-M0 family.
* nuvoTon NUC120:
- Added support for the nuvoTon NUC120 MCU (Cortex-M0).
* nuvoTon NUC120 Boards:
- Added basic support for the nuvoTon NuTiny-SDK-NUC120 board (Cortex-M0).
* LPC17xx:
- Added support for the LPC177x and LPC178x families. Most of this is
the work of Rommel Marcelo.
* LPC17xx Boards:
- Added support for Zilogic System's ARM development Kit, ZKIT-ARM-1769.
From Rashid.
- The port for the WaveShare Open1788 board is now functional. Basic
OS test and NuttShell (NSH) configurations are functional. More
driver development and testing is needed (from Rommel Marcelo).
* LPC17xx Drivers:
- Added an SD card MSI driver for the LPC178x. The driver is marginally
functional but requires DMA capability to be reliable.
* STM32
- Support extended to handle the STM32 F3 family (Cortex-M4 with F1-like
peripherals).
* STM32 Boards
- Added support the STMicro STM32F3Discovery board (STM32 F3).
* Stellaris LM3S/LM4F
- Basic support for the LM4F120 family is in place, but untested (mostly
from Jose Pablo Carballo).
* Stellaris LM4F Boards
- Add support for the LM4F120 LaunchPad (untested).
* Networking:
- select() should now allocate a little less memory.
* Memory Management:
- Extended to support multiple heaps. This is used as part of
the kernel build in order to support separater user- and
kernel-mode heaps.
- The stand-alone memory manger test had to be removed. It
was too entangled and made extension of the memory manager
nearly impossible. This is a loss.
* Build System:
- Several configurations converted to use the kconfig-frontends
configuration tool. There are still many more that need to
be converted.
* C Library:
- Move the workqueue logic into the C library. There is now a
special user-space version of the work queue (which will only
be used with a NuttX kernel build).
- Implementation of itoa() contributed by Ryan Sundberg.
* Applications:
- The NSH builtin task logic now uses task_spawn() to start builtin
applications.
- The OS test now includes a test cased to verify task_restart().
Efforts In Progress. The following are features that are partially
implemented but present in this release. Most are expected to be fully
available in NuttX 6.27.
* LM4F120 LaunchPad port. Code is in place, but nothing has been tested.
* WaveShare Open1788 port. This port as actually complete and
functional. However, there is still ongoing development and
testing of drivers.
* Kernel Build. Much progress has been made, but there kernel build is
not yet fully functional due to several user resources that are not yet
properly disentangled from the kernel blob.
* Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Tasking:
- The wrong PID was being signalled with SIGCHILD. It should be
the PID of the task that create the task group, not the ID of
the last thread to leave the task group.
- Added logic so that some internal resources and states are recovered
when tasks are deleted or restarted. Handle cases where there are
outstanding timed events pending when tasks are deleted or restarted.
* ARMv7-M:
- Several fixes to the MPU control logic.
* Drivers:
- Removable serial drivers race conditions fixed.
- MAX11802 timing bug (from Petteri Aimonen).
* STM32 Drivers:
- Handle cases were SPI DMA logic fails if sem_wait is awakened
by a signal. Need to clear error flags to prevent corruption of
subsequent transfers. Also, bit count should not be changed while
the SPI peripheral is enabled (from Petteri Aimonen).
- Fixes to the OTG FS device driver from Petteri Aimonen.
- Fix typos in DMA register header file (from Yan T.)
* Graphics:
- Correction to the hyphen in the SANS 17x22 font (from Petteri
Aimonen).
* Networking:
- Corrected errors in the socket poll/select logic. Additional
state logic was needed to detect if the socket is still connected
before starting the poll wait. (bug reported by Qiang Yu).
* Memory Management:
- mallinfo() should hold the memory manager semaphore (from Petteri
Aimonen.
* Build System:
- Resolved several build errors reported by Mike Smith.
* Applications:
- Fixed an NSH memory leak: Needed to detach after creating each
pthread.
- readline() now returns EOF on any failure (instead of a negated
errno value). This is because the underlying read is based on
logic similar to getc. The value zero (meaning end-of-file)
was being confused with a NUL. So if a NUL was received, the
NSH session would terminate because it thought it was the end of
file.
NuttX-6.27
----------
The 94th release of NuttX, Version 6.27, was made on April 28, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.27.tar.gz and
apps-6.27.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* OS Initialization:
- Add missing registration of /dev/zero. Registration of /dev/null
should depend upon conditional compilation. From Ken Pettit.
* Tasking:
- Added a new interface to set aside memory on the task's stack. This
is used (at least in the kernel build) to hold task arguments.
- Remove up_assert_code(). One assertion routine is enough.
* Kernel Build:
- Extensive changes were made to support the kernel build mode. In
this mode, NuttX is built as a monolithic kernel. NuttX is built
as a separate kernel mode "blob" and the applications are built
as a separate user mode "blob". The kernel runs in kernel mode and
the applications run in user mode (with the MPU restricting user
mode accesses). Access to the kernel from the user blob is only
via system calls (SVCalls).
- Kernel build configurations for the Open1788 board and for the
STM32F4Discovery now execute correctly.
- Changes were made to task and thread start-up routines, signal
handling, data structures, ARMv7-M SVCalls, stack management
interfaces,
* Drivers:
- Driver for the ST7567 LCD Display Module from Univision Technology
Inc. Contributed by Manikandan.S
- SPI initialize functions renamed so that multiple SPI blocks can
be initialized.
- Extended to support the RAMTRON FM25V01 device. Contributed by
Lorenz Meier
- Serial drivers: TIOCSERGSTRUCT ioctls now conditioned on
CONFIG_SERIAL_TIOCSERGSTRUCT
* ARMv7-M (Cortex-M3/4):
- Added support for modifiable interrupt vectors in RAM
* nuvoTon NUC1xx:
- Added kernel build support
* Freescale Kinetis:
- Add kernel build support
- Add support for the Kinetis L family of Cortex-M0+ MCUs. Contributed
by Alan Carvalho de Assis.
* LPC17xx:
- Now holds off sleep mode in the IDLE loop is DMA is in progress
(because sleep mode will disable CPU SRAM).
* LPC17xx Boards:
- ZKIT-ARM-1769: Now supports the ST7567 LCD display module. Added
an nxhello configuration for testing (Manikandan.S).
- ZKIT-ARM-1769: Add support for both CAN1 and CAN2. Contributed by
M.Kannan
- Open1788: Basic support for the WaveShare Open1788 board is complete
with working OS test, NSH, and graphics configurations.
- Open1788: Integrated the LPC178x LCD driver with the WaveShare display.
Touchscreen support is included, howerver, there appears to be an
issue with the Open1788 touchscreen interrupt signal.
- Open1788: Now supports SDRAM (used to provide the LCD framebuffer).
- Open 1788: Reversed sense of the IDLE LCD. It is now off when the
LPC17 is sleeping and on when awake. That is much a better visual
indication of the dynamic CPU load
* LPC17xx Drivers:
- Added an LCD framebuffer driver for the LPC177x/8x family.
- Implemented LPC17xx GPDMA support.
- Integrated the LPC17xx GPDMA support into the SD card driver.
- SSP driver adapted to work with the LPC178x family.
- Separate LPC176x and LPC178x GPIO logic; this logic is too different
to maintain in one file with conditional compilation.
- Re-design of the GPIO logic for the LPC178x family by Rommel Marcelo.
* LPC43xx:
- Added kernel build support
* STM32:
- Added support for kernel mode build.
- Added architecure support for the STM32 F427/F437 chips. Contributed
by Mike Smith
* STM32 Boards:
- Added a configuration to support a kernel mode build of the OS test
on the STM32F4Discovery
* Stellaris LM3S/LM4F:
- Added kernel build support
- Added support for the 7 UARTs on the LM4F120
* Stellaris LM4F Boards:
- Added scripts and instructions to simplify use of OpenOCD with ICDI
(JP Carballo)
- The basic for the Stellaris LM4F120 Launchpad is complete. This
includes support for OS test and NSH configurations. Additional
driver development is needed.
* Build System:
- Directories where the same sources files are used to build different
objects in the first and second pass kernel builds need to keep those
objects in separate directories so that they are not constantly
rebuilt.
* Applications:
- apps/system/ramtest: Add a simple memory test that can be built
as an NSH command.
* Tools:
- kconfig2html is a new tool which will replace the hand-generated
documentation of the NuttX configruation variables with auto-
generated documentation.
Efforts In Progress. The following are features that are partially
implemented but present in this release. Most are expected to be fully
available in NuttX 6.28.
* A port to the Freescale Freedom KL25Z is complete but not yet stable
enough. The KL25Z is a low-cost Cortex-M0+ part with 128KB of FLASH
and 16KB of SRAM. This is is the effort of Alan Carvalho de Assis.
* Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
At this time, only 32% of the configurations have been converted
to use the kconfig-frontends tools.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Tasking:
- Fixed a critical bug: When there is pending C buffered output
and the system is very busy, the a pthread may be blocked at
a critical point when trying to exit. Blocking at this critical
point would cause crashes. All entire task/thread exit logic
paths were reviewed and failsafe mechanisms were put in place
to assure that exitting tasks never block after task teardown
has been started.
* ARMv6-M:
- Fixed parameter passing for all system call inline functions with > 3
parameters
- Fixed a major problem: The Cortex-M0 has no BASEPRI register but the
logic of NuttX-6.26 was using it to manage interrupts. Switch to
using the PRIMASK instead. This means that hardfaults will (again)
occur when SVC instructions are executed
* ARMv7-M:
- Corrected Correct MPU sub-region settings for unaligned regions.
- In exception handling with CONFIG_NUTTX_KERNEL, need to explicitly
set and clear the privilege bit in the CONTROL
- Fixed parameter passing for all system call inline functions with > 3
parameters
* Drivers:
- Support for O_NONBLOCK was not supported in the "upper half"
serial driver.
- PL2303 compilation errors
* Stellaris LM3S/4F:
- Corrected typos in alternate function definitions.
* LPC17xx Drivers:
- Added a work-around for an ADC errata. From Chris Taglia
- Only one ADC pin was configured. Need to configure all that
are in the ADC0 set. From MKannan
* File Systems:
- The FAT logic was not making a distinction between directory
non-existence and file non-existence so when it you try to
create a file in a non-existent directory, it would create a
file with the name of the missing directory. Reported by Andrew
Tridgell
- Several fixes to the FAT file system from Ronen Vainish. These
fixes mostly involve the logic to extend directory clusters for
the case of long file names but also include a few important
general fixes (such as for storing 32 bit FAT values)
- mkfatfs was writing the boot code to the wrong location. From
Petteri Aimonen
* Networking:
- Fixed a compilation error when socket options are are disabled.
Reported by Daniel O'Connor
* C Library:
- Corrected an error in sscanf. If %n occurs in the format statement
after the input data stream has been fully parsed, the %n format
specifier will not be handled. Reported by Lorenz Meier
- strchr(str, '\0') should return a pointer to the end of the string,
not NULL. From Petteri Aimonen
* Build System:
- Fix naming of NuttX target if EXEEXT is defined.
* Applications:
- OS test: Fix timing error in non-cancelable thread test.
- NSH: Correct the test of the skip input parameter. Was limiting the
range to <= count. From Ken Petit.
NuttX-6.28
----------
The 95th release of NuttX, Version 6.28, was made on June 14, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.28.tar.gz and
apps-6.28.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* File Systems:
- SMART FLASH file system (contributed by Add Ken Pettit).
* MTD (FLASH) Drivers:
- Add support of MTD partitions via a new MTD driver that manages a
set of MTD devices, each managing a subset of the FLASH region
managed by the parent MTD driver.
- Extended the MTD interface to provide an (optional) method to
perform byte oriented writes if supported by the FLASH part.
- M25Px driver re-architected to use the byte write capability (when
possible) and to use 4KB sectors for the erase block size when the
part supports it (from Ken Pettit).
* LCD Drivers:
- New interface definitions to support audio devices (from Ken Pettit)
and alphanumeric, segment LCDs.
* Wireless Drivers:
- Added new driver for the wireless nRF24L01+ transceiver (from
Laurent Latil).
* Calypso:
- Added support for the Pirelli DP-L10 phone (from Craig Comstock via
Alan Alan Carvalho de Assis)
* STM32:
- Added an option to conditionally disable the "wfi" sleep mode. This
is needed with certain JTAG debuggers to to prevent the debug
session from begin disconnected (from Ken Pettit).
- Added support for the STM32L (STM32L15X/STM32L16x) family.
- Added STM32F103C4 and F103C8 chip support (from Laurent Latil).
- Added a new interface function, stm32_dmacapable() that can be used
to determine if DMA is possible from the specified memory address
(from Petteri Aimonen)
* STM32 Drivers:
- If CONFIG_STM32_DMACAPABLE is defined, the STM32 SPI driver now uses
stm32_dmacapable() to determine if it is possible to perform DMA
from the specified address. This change is important for the STM32
F4 which may have SPI data buffers allocated on the stack in CCM
memory which cannot support the DMA (from Petteri Aimonen).
* STM32 Boards:
- Support added for the MikroElektronika Mikromedia for STM32F4
development board (from Ken Pettit) with the MIO283QT2 LCD and
touchscreen. Several graphics configurations are included.
- The HY-mini STM32v board now uses the common SSD1289 driver
and supported the card detect interrupt. Several new
configurations also added and some removed (from Laurent Latil).
- Support added for the R65105-based LCD that comes with some
HY-Mini STM32v boards (from Christian Faure).
- Added basic support for the STM32L-Discovery board. Drivers
for the on-board segment LCD are included.
- Added support for the STM32 Tiny development board based on the
STM32 F103C8T6 MCU. This includes support for the nRF24L01+
wireless on the board (from Laurent Latil).
* Stellaris LM3S/LM4F:
- Support added for a TI/Stellaris internal FLASH MTD driver (from Max
Holtzberg).
* Stellaris LM4F Boards:
- The LM3S6965-EK now has configurations for the UDP discovery tool and
for the TCP echo server (both from Max Holtzberg)
* Atmel ATSAM3/4:
- Reorganized, renamed, and updated directory structure to better
support additional members of the SAM3/4 family.
- Added support for both the ATSAM4S and ATSAM4L families. The
ATSAM4S is similar to the ATSAM3U, but the ATSAM4L is quite a
different beast, really much more akin to the AVR32s SoCs but
with a Cortex-M4.
* Atmel ATSAM3/4 Boards:
- Added support for the Atmel SAM4L Xplained Pro development board.
This board features the ATSAM4LC4C MCU (Cortex-M4 with 256KB FLASH +
32KB SRAM).
- Added support for the Atmel SAM4S Xplained developement board. This
board features the ATSAM4S16C MCU (Cortex-M4 with 1MB FLASH + 128KB
SRAM).
* PIC32MX Boards:
- Added support for the 1602 segment LCD on-board the Sure PIC32MX
board. This board will now also support a USB NuttX console and
the USB monitor test program.
* Build System:
- Clean-up of almost all .gitignore files: Made scope of ignore to be
only the current directory; Ignore .dSYM files in directories where
.exe's may be built. Also, in Makefiles, clean .dSYM files in
directories where an .exe may be built.
- Standardize and consolidated all build-as-an-NSH-application
configuration settings. Now only CONFIG_NSH_BUILTIN_APPS is
sufficient to build an application, test, or or example as an NSH
builtin application.
- Added support for a generic ARM, ARMv6-M and ARMv7-M Windows EABI
toolchains.
* Libraries:
- Added encoder/decoder logic to marshal and serialize special segment
LCD (SLCD) commands intermixed with normal ASCII data. This is the
similar to the encoding/decoding logic that is used to marshal
special commands from a keyboard.
- Add dprintf() and vdprintf() (the latter from Andrew Tridgell).
- Add an application that may be built as an NSH builtin command that
will erase FLASH using a flash_eraseall NSH command (from Ken Pettit).
* Applications:
- Added an MTD partition test/examples. Currently used with (1) the a
simulation configuration to test MTD partitions on a RAM emulation
of FLASH and (2) with the Mikroe STM32F4 configuration.
- Added a test/example to verify alphanumeric, segment LCDs.
- Added a simple single threaded, poll based TCP echo server based
on W. Richard Stevens UNIX Network Programming Book (from Max
Holtzberg).
- Added several tests of the SMART block driver and file system (from
Ken Pettit).
- Added a runtime configuration for the UDP discover utility (from
Max Holtzberg).
- Added an example application to demo the nRF24L01 driver (from
Laurent Latil).
- New and modified NSH commands:
Added a -h option to the df command to show the volume information
in human readable form (from Ken Petit).
Add a new mksmartfs command (from Ken Petit).
Efforts In Progress. The following are features that are partially
implemented but present in this release. Most are expected to be fully
available in NuttX 6.28.
* Audio System:
- A complete audio subsystem include CODECs, higher level management,
interface definitions, and audio drivers was contributed by Ken
Pettit. This work has not been completely verified as of this
release and so is categorized as a work-in-progress. At present,
progress is blocked due to issues interfacing with the VS1053
audio DAC on the Mikroe STM32F4 board.
* kconfig-fronted Configuration:
- Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
At this time, only 43% of the configurations have been converted
to use the kconfig-frontends tools.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Tasking:
- Modify assertion in the priority inheritance logic that is reported
to cause false alarm assertions.
* Kernel Build:
- Typo in syscall proxying logic corrected by Ken Pettit.
* Networking:
- Poll setup/teardown logic should ignore invalid (i.e., negative)
file descriptors (from Max Holtzberg).
- When readahead data is available, the network poll() logic should
set POLLIN (or POLLRDNORM), not POLLOUT (from Max Holtzberg).
* LCD Drivers:
- Correct power controls in the MIO283QT2 LCD driver.
* USB Device Controller Drivers:
- Change the default IN request buffer size from 64 to 96. This will
avoid requests of exactly MAXPACKET size and, hence, avoid so many
NULL packets. Also, fix the OUT request buffers size to exactly the
max packet size. It really cannot be any other size.
* STM32 Drivers:
- Correct some bad STM32 F1 DMA definitions that crept into the system
a few months ago a broke STM32 F1 DMA (from Laurent Latil)
- Fixed an error in NULL packet handling in the STM32 F1 USB device
controller driver: If the NULL-packet needed flag ever got set,
then it was not being cleared and infinite NULL packets resulted.
This only affects the CDC/ACM class and was the cause of the
failures using the USB CDC/ACM device as a NuttX console. With this
change the USB works well as an alternative NuttX console device for
the STM32 F1 family.
- Correct some bad condition compilation in the RCC logic (CONFIG_
missing from setting names). This affects some STM32 FLASH pre-
fetch settings (from Lorenz Meier).
- Change for hardware flow control support for STM32. The change also
fixes incorrect operation of USART2 and UART5 in current master
(from Lorenz Meier and Mike Smith).
- Fixed a backward conditional in USB OTG FS host controller driver
that prevented detection of disconnection events (from Scott).
* LPC17xx Drivers:
- I2C interrupt control. Also correction for a single byte read
timeout error (from M. Kannan).
* Freescale Kinetis:
- Freedom KL25Z pin multiplexing and LED control corrections (from
Alan Carvalho de Assis)
* PIC32MX:
- Fix NULL packet handling in the PIC32 USB device driver. Without
this fix the CDC/ACM driver cannot be used reliably with the PIC32
USB. With this change the USB works well as an alternative NuttX
console device.
* Graphics:
- Default priorities for NxWidget and NxWM threads should be 100,
not 50, to be consistent with other default priorities.
* Applications:
- Remove the CONFIG_EXAMPLES_NXTEXT_NOGETRUN option from the NXTEXT
example. The test logic was bad for the case where this options is
not selected. Also, completed the empty Kconfig file.
- C++ name mangling was occurring when this example is built as an NSH
built-in application causing the entry to be undefined when called
from C code.
- Add some missing NSH library configuration values (from Lorenz
Meier).
NuttX-6.29
----------
The 96th release of NuttX, Version 6.29, was made on July 31, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.29.tar.gz and
apps-6.29.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Drivers:
- Generalized the SSD1306 driver and added support UG-2832HSWEG04
which is very similar to the existing support for the
UG-2864HSWEG01.
- Added support for a generic bit-bang SPI driver. This includes
both a common "upper half" driver as well as a platformp-specific
"lower half" dirvers based on a common "template."
* ARMv7-A, Cortex-A5
- Added support for the ARMv7-A architecture and the Cortex-A5 in particular.
* ARMv7-M, Cortex-M3/4
- Modified how some registers are copied during a context switch (with
lazy FPU register saving). This should save some context switching
time when the context switch is due to interrupt level processing.
* STM32:
- Added support for a separate CCM heap. This may be useful for
segregating allocations for CCM (which cannot be used for DMA)
from other allocations (that may be used used for DMA).
* STM32 Drivers:
- DAC: Added support for DAC DMA (contributed by John Wharington).
- I2C: An I2C driver for the STM32 F3 family (from John Wharington).
* Atmel AT91 SAM/4:
- Add support for SAM3X and SAM3A chips
* Atmel AT91 SAM/4 Drivers:
- Re-architect the SAM3/4 SPI driver so that is it compatible with the
SPI drivers of other MCUs.
- Added register definition file for the SAM4L LCD peripheral.
- Added SAM4L PDCA register definition file
* Atmel AT91 SAM/4 Boards:
- SAM4L-Xplained: Added support for the SPI-based SD card on the I/O1
module.
- SAM4L-Xplained: Added a driver for the LED1 segment LCD module.
- SAM4L-Xplained: Added support for the UG-2832HSWEG04 OLED on the
SAM4L Xplained Pro's OLED1 module
- SAM4S-Xplained: Added support for on-board 1MB SRAM
- Arduino Due: Basic support for the Arduino Due (SAM3X) is now
included.
- SAM3U-EK: The touchscreen is now functional.
* Atmel AT91 SAMA5D3
- Added support for the Atmel AT91SAMA5D3 Cortex-A5 chip family.
* Atmel AT91 SAMA5D3 Boards
- Added support for the Atmel SAMA5D3x-EK boards which use the AT9
SAMA5D3x chips (x=1,3,4,5).
* Freescale KL25Z Drivers
- Freescale KL25Z TSI register definitions and example TSI driver for
the Freedom KL25Z board from Alan Carvalho de Assis.
- Added SPI driver and register definitions for the Freescale KL25Z.
- Added a framework for controlling SPI-related discrete inputs and
outputs. Taken from work by Alan Carvalho de Assis
* Build System:
- New sub-directories to hold SPI-related files: includes/nuttx/spi.h
moved to include/nuttx/spi/.; SPI-related Kconfig info moved from
drivers/Kconfig to drivers/spi/kconfig.
- Finally... I changed the naming of configuration variables like
CONFIG_DRAM_ to CONFIG_RAM_. This has bothered me for a long time
since most boards don't have DRAM. The more generic RAM naming
should not produce so much cognitive dissonance
* Libraries:
- Added CRC16 support.
* Applications:
- Added Zmodem file transfer support. This may be used as an embedded
library or may be built as 'sz' and 'rz' commands that can be
executed from NSH.
- C++ initializers should be set once and, preferably, in the context
of the task that uses any C++ statically initialized classes. This
only becomes an issue if cxxtest or helloxx are built as NSH builtin
applications. Then you want the initialization done in cxxtext or
helloxx and not in NSH (and certainly not twice). Added
configuration options to control who does the C++ initialization.
NSH now does not do C++ initialization be default and must be
configured to do otherwise. Conversely, cxxtest and helloxx
will always do C++ initialization unless configured do otherwise.
- examples/cxxtext: Add ostream test as provided by Michael.
- NSH: Added a 'cmp' command that can be used to compare two files
for equivalence. Returns an indication if the files differ.
Contributed by Andrew Tridgell (via Lorenz Meier).
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* Audio System:
- A complete audio subsystem include CODECs, higher level management,
interface definitions, and audio drivers was contributed by Ken
Pettit. This work has not been completely verified as of this
release and so is categorized as a work-in-progress. At present,
progress is blocked due to issues interfacing with the VS1053
audio DAC on the Mikroe STM32F4 board.
* kconfig-fronted Configuration:
- Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
At this time, only 45% of the configurations have been converted
to use the kconfig-frontends tools.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* File Systems:
- Fixed compilation error if no file systems are enabled: Change
error to ERROR.
- Read-Ahead/Write buffering: Correct typos that can cause failures
in some configurations (From Chia Cheng Tsao).
* Drivers
- Remove the wait for the touchscreen busy bit in the ADS7843E driver.
From my reading of the ADS7843 spec, it would not be appropriate to
wait for the BUSY bit to de-asserted anyway (since it is only de-
asserted when we read the data). Most boards do not even bother to
provide the BUSY bit.
- MMC/SD SPI based driver: Driver needs to make sure that the SPI
mode and data width are correct.
- ENC28J60: Change buffer ordering to work around Errata. From Dave
(ziggurat29).
* USB Device Controller Drivers:
- Fixed a typo in the composite device driver unitialization logic.
DEV1 should be DEV2 in one case.
- usbdev.h: Fix some typos that cause compiler errors when
CONFIG_USBDEV_DMA and CONFIG_USBDEV_DMAMEMORY are selected (From
Chia Cheng Tsao).
* ARM9:
- Fix a bug (uninitialized register error) that crept in the ARM9
boot-up code several years ago. Obviously no one has used the
ARM9 NuttX port for years!
* STM32 Drivers:
- Fix STM32 OTF FS endpoint allocation logic. Apparently the same
endpoint can be allocated as both an IN or an OUT endpoint. The
existing implementation only supported one allocation, either IN or
OUT. This resulted in failures to allocate endpoints when used with
the CDC/ACM + MSC composite driver (From Chia Cheng Tsao).
- SDIO: Add support for the data block end (DBCKEND) interrupt to
terminate transfers (From Chia Cheng Tsao).
- DAC: Fixed numerous DAC driver errors and added support for DAC
DMA (contributed by John Wharington).
* SAM3/4:
- SAM4S: Correct configuration of PIO pins for SAM4S B and C peripherals.
- Need to disable write protection before configuring PIO pins.
- GPIO configuration logic must protect against re-entrancy.
- Clocking must be applied to the SMC module for the 3X and 3A family in
order for the NFC SRAM to be functional.
- Fixed some errors for interrupts on ports D-F.
* SAM3/4 Drivers:
- Common SPI driver: Fix SPI mode setting. In the SAM3/4 family, the
clock phase control (CPHA) is inverted (NPHA). Also fixed an
incorrect pointer test. Was checking if the wrong pointer was NULL.
* SAM3/4 Boards:
- SAM3U-EK: Fix polarity of the /PENIRQ signal (it is active low).
The SAM3U-EK board now runs at 96MHz.
* Applications:
- apps/examples/nxhello: Minor fix for compilation error when the
display resolution is low (< 8bpp) due to a typo that has been there
for a long time. Also Correct default colors when in Y1 code mode.
- apps/system/ramtest: The RAM test was not correctly built
into the configuration and build system.
- apps/examples/composite: Change to prevent some false alarm debug
assertions (From Chia Cheng Tao).
NuttX-6.30
----------
The 97th release of NuttX, Version 6.30, was made on September 14, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.30.tar.gz and
apps-6.30.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Common Drivers:
- Extended TERMIOS support for serial and CDC/ACM drivers. From
Mike Smith, Andrew Tridgell and Lorenz Meier.
- Added option to disable serial port reordering. From Lorenz Meier.
- Several changes to the USB host control interface and extensions to
common USB host logic to handle host controllers with multiple
downstream ports in the root hub.
- USB device tracing: Extended decoding and stringifying of USB trace
output to include trace output from class drivers.
- USB host tracing: Added support for USB host tracing similar in
some ways to USB device tracing: Stringification is an inherent
part of the trace decoding (not an option). Only available in the
SAMA5 USB host drivers now.
* Networking / Network Drivers
- Support for the Microchip ENCX24J600 Ethernet driver from Max
Holtzberg
- CC3000 Networking. Initial support for the TI CC3000 network
module on the Freescale Freedom-KL25Z board from Alan Carvalho
de Assis. This is still a work in progress.
* ARMv7-A, Cortex-A5
- Restructured some MMU-related logic and header files.
- Hooks added for Cortex-A8, but not yet used.
* STM32 Drivers:
- STM32 SPI: nbits() interface extended to control bit order as well
as bit width (from Teemu Pirinen)
* STM32 Boards
- Olimex STM32-P107: Incorporate ENCX24J600 networking for the Olimex
STM32 P107 board.
- LeafLabs Maple Board: Add board support for the LeafLabs Maple and
Maple Mini boards. From Librae.
* Atmel AT91 SAMA5D3x
- Added support for the SAMA5 DMAC controllers.
- DMA-capable drivers for the SAMA5 SPI peripherals.
- DMA-capable HSCMCI 0/1/2 drivers.
- Support for PIO interrupts
- Utilities for intelligent conversions between physical and virtual
addresses.
- Added USB host controller drivers for both the OHCI (low- and full-
speed) peripheral and the ECHI (high-speed) peripheral.
- Added USB device controller for the SAMA5 UDPHS peripheral (full-
and high-speed).
- Added a Two Wire (TWI) driver. This is a variant of I2C.
* Atmel AT91 SAMA5D3x-EK Development Boards
- Now supports onboard SDRAM. Modified heap initialization logic
to include SDRAM if configured.
- Integrated a FAT file system on the on-board SPI-based AT25 serial
FLASH
- Integrated HSMCI0 and HSMCI1 support for the microSD and full file
SD card slots. Includes PIO interrupts for card detection events.
- Integrated USB OHCI and ECHI host and high-speed peripheral support.
File system on AT25 now exported via Mass Storage Class. Includes
PIO VBUS controls.
- Integrated the TWI driver and the I2C tool. Added support for an
external AT24 serial EEPROM.
* Applications:
- apps/examples/cc3000. Initial support for the TI CC3000 network
module on the Freescale Freedom-KL25Z board from Alan Carvalho de
Assis. Includes the test to verify the CC3000.
- apps/examples/usbmsc: apps/examples/usbstorage renamed usbmsc for
consistency. Change submitted by CCTSAO.
- apps/system/usbmonitor: The USB monitor has been extended so that
it can be used with USB device or host trace data.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* CC3000 Networking
- CC3000 Networking. Initial support for the TI CC3000 network
module on the Freescale Freedom-KL25Z board from Alan Carvalho
de Assis. This is still a work in progress.
* kconfig-fronted Configuration:
- Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
At this time, only 46% of the configurations have been converted
to use the kconfig-frontends tools.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* File Systems:
- ROMFS: Fix an error where long (>15) file names were read
incorrectly from a ROMFS file system. From Mike Smith
- NXFFS: Clean up some compiler warnings.
* Common Drivers
- MMC/SD driver: Correction for a bad return value when multiple
block SDIO transfers are suppressed. By Andrew Tridgell.
- USB HID keyboard and mass storage host-side class drivers: Fix some
compilation errors and warnings when pre-allocated data structures
are used.
- USB device-side class drivers: Fix some compilations errors when
DUALSPEED (i.e., full- and high-sped) support is enabled.
- CDC/ACM and PL2303: Don't use max packetsize assigned to the endpoint
when allocating request buffers; The default value of the endpoint
max packetsize may be incorrect because the endpoint has not yet
been configured. Really only an issue for high-speed endpoints.
- USB Host Mast Storage Class: Fixed a problem that was causing some
devices to fail to initialize: If device is returning fatal transfer
errors while attempting to initialize, don't bother with the startup
retries; abort immediately so that the device will be reset and we
can try again with a better ready device.
- USB Host Mast Storage Class: Correct a reference counting error:
When an MSC device transfer fails while waiting for UnitTestReady,
the reference count on the class was not being decremented. The end
result is a memory leak as can be seen by the USB device numbers
incrementing: sda, sdb, sdc, ...
- USB Device CDC/ACM: Fix backward conditional compilation in the
CDC/ACM driver with regard to remote wakeup and self-powered
capabilities. From the PX4 team via Lorenz Meier,
* Networking / Network Drivers
- ARP IP harvesting: Correct backward condition in netmask task.
From Max Holtzberg.
- Network connection monitor: Fixes a race condition where a loss of
connection may not be detected when the connection is lost before it
has been accepted (from Max Holtzberg).
- TCP/IP Backlog: Fix a critical bug in the TCP/IP backlog
initialization: Only the first backlog buffer was getting added to
the free list. From Max Holtzberg.
- ENC28J60: Fixes and improvements back-ported from the ENCX24J600
to the ENC28J60 by Max Holtzberg.
* STM32 Drivers:
- STM32 I2C fixes for the STM32 F3 family from John Wharington.
- STM32 I2C Correct an error that crept into the STM32 F1 I2C
driver with some recent changes. From Librae
- STM32 F4: Added some missing CONFIG_SERIAL_TERMIOS support; Fixed
some STM32 F4 Timer 8 pin configurations. From CCTSAO.
- STM32 SDIO: If CONFIG_SDIO_BLOCKSETUP defined, OS would crash. Now
Generate an error if CONFIG_SDIO_BLOCKSETUP is defined; that
option is not yet supported by the STM32 SDIO driver. From CCTSAO
- STM32 I2C Timers: Some CCER bit settings changed. Submitted by
CCCTSAO.
- STM32 CAN: Fix access to CAN filter registers. From the PX4 team
via Lorenz Meier.
- STM32 Kconfig: Fix STM32 UART7/8 Kconfig names and UART DMA. From
the PX4 team via Lorenz Meier.
* LPC17xx Drivers
- Fix #endif with missing #if in USB host header file. Reported
by Andrew Bradford,
* SAM3/4 Boards:
- Corrected DMA-related problems: Bad register definitions, parameters
reversed in a function call.
- Correct a race condition in the HSMCI driver when an interrupt
occurs before the wait for the interrupt begins.
- Peripheral clock setup: Correct a typo in a register name.
* Atmel AT91 SAMA5D3
- Order of some operations changed in boot-up logic to defer
enabling of caching of memory regions until SDRAM is initialized.
- Correct handling of spurious interrupts.
* Freescale KL25Z Drivers
- KL25Z SPI: Correct typo in name of a function. From Alan Carvalho
de Assis.
* Applications:
- apps/examples/composite: Fix a typo that can cause a configuration
error. From CCTSAO.
- apps/examples/pwm: Clean-up some configuration confusion.
- apps/netutils/dhcpd/dhcpd.c: Fixed calculation of the next lease
address. From Paolo Messina.
- apps/examples/usbmsc: Don't try to control USB trace if we are
an NSH built-in task. In that case our attempts are inadequate
and only interfere with with other logic that is attempting to
to do the same thing (in NSH or in the USB monitor).
- apps/examples/usbmsc: IMPORTANT bug fix: Change how the msconn
works. Because of recent changes the msconn command was hanging.
This was because the USB MSC start-up logic creates a pthread;
Now waitpid() will wait until all members of the task group
exit. So NSH was hanging in waitpid when msconn started even
though msconn returned. The USB MSC logic really should not use
a pthread, but we are stuck with that for now. The work-around
is the msconn now daemonizes itself so that it so that the pthread
is created in a different task group.
- apps/nshlib: Fix NSH listing output for the case of a single file.
From the PX4 team; provided by Lorenz Meier.
NuttX-6.31
----------
The 98th release of NuttX, Version 6.31, was made on October 28, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.31.tar.gz and
apps-6.31.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* General:
- Standardized stack checking logic so the interfaces can be used
by common stack monitoring logic.
* Audio Subsystem and Audio Drivers:
- Ken Pettit has finally released his long awaited audio subsystem.
This is a generic audio subsystem that is appropriate for the
deeply embedded MCU. Current testing has, however, been focused
on the VS1053 CODEC chip.
- Ken Pettit's VS1053 audio CODEC driver is now functional.
* Networking / Network Drivers
- Add the prefix ETH0 to all PHY configuration selections. This
will allow us to support to Ethernet MAC drivers with two different
PHYs (identified with ETH0 and ETH1). Enabled with CONFIG_NETDEV_MULTINIC.
- Add MII/RMII PHY definitions for the Micrel KSZ8051 PHY.
- Add GMII/GRMII PHY definitions for the Micrel KSZ9021/31 PHY.
- New network-optimized, higher-performance sendfile() implementation
from Max Holtzberg.
- Added a simple routing table. This table is currenly only used (1)
when we need to look-up an Ethernet device based on an IP address,
and (2) in the ARP logic when we need to request the MAC address of
the router, vs the MAC address of the peer.
- Make net_close() nonblocking and free unestablished connections if
no free connections available. From Max Holtzberg.
- Changed the meaning of the uip_*input functions. They now return
success when a packet is dropped; This is needed for the ENCX24J600
driver that must make a decision to return the packet or not: It
should not retry dropped packets. From Max Holtzberg.
- David Sidrane has completed integration of the CC3000 networking.
This is much more than a network driver: It is a complete
replacement for the NuttX networking with off-chip networking support
in the CC3000.
- Numerous enhancements to the ENCX24J600 driver from Max Holtberg.
* Other Common Drivers:
- The SST25 serial FLASH MTD driver now includes support for the
SST25VF016B. From David Sidrane.
- Add a preflight method to the SDIO interface to support the STM32
DMA usage model. From Mike Smith.
- Enhanced the MMC/SD SDIO driver to perform DMA preflight operations
and fail DMA read/write requests that fail preflighting. From Mike
Smith.
- Add an ioctl command that can be used to trigger ADC/DAC conversion
under application control.
* File Systems:
- Enhanced the FAT32 filesystem code to understand DMA preflight
failures, and to use the file sector buffer as a bounce buffer when
a user-supplied buffer is not suitable for DMA. From Mike Smith.
* Atmel AT91 SAMA5D3x
- Add support so that subsets of the total DRAM (and other external
memory) can be added to the heap, leaving other memory reserved for
other purposes (like the LCDC framebuffers).
* Atmel AT91 SAMA5D3x Drivers:
- Use more descriptive task names when starting the EHCI and OHCI
monitor tasks.
- Added a 10/100Base-T Ethernet (EMAC) driver.
- Added a 1000Base-T Ethernet (GMAC) driver.
- Added a Real Time Clock (RTC) driver and integrated with the NuttX
system time logic.
- Added support for /dev/random using the SAMA5D3x True Random Number
Generator (TRNG).
- Added a Watchdog Timer (WDT) driver.
- Added a Timer/Counter (TC) library with interface that make be used
by other drivers that need timer support.
- Added an ADC driver that can collect multiple samples using the
sequencer, can be trigger by a timer/counter, and supports DMA data
transfers.
- Added a touchscreen driver based on the special features of the
SAMA5D3 ADC peripheral.
- Added an LCD controller (LCDC) frame buffer driver.
- Added a CAN driver. However, testing has been delayed because of
cabling issues.
- Basic header file support is available for the Image Sensor
Interface (ISI) camera interface. Work on the camera driver is
underway and is expected in the next release.
* Atmel AT91 SAMA5D3x-EK Development Boards
- Add OS test support for the FPU test.
- Enable the task name feature board configuration sto provide
prettier ps command output.
- Added NX and NxWM configurations to verify the LCD and touchscreen.
There are still some outstanding issues with the NxWM configuration
as of this release.
- The TRNG and /dev/random are now enabled by default in the demo
configuration.
* Atmel AT91 SAM3/4 Boards:
- Add configuration to select revision 3 of the Arduino Due which has
some small but important differences. Suggested by gdi@embedders.org.
* STMicro STM32:
- Add support for the STM32F207ZE chip. From Martin Lederhilger.
* STMicro STM32 Boards:
- Add configuration for the Spark Core. The initial check-in is
basically the Maple Mini board and subsequent development by David
Sidrane is his special Spark emulation hardware. The configuration
should be very mature when actual Spark hardware is available.
- Support for the Olimex STM32 P207 board added by Martin Lederhilger.
- Configuration for the Mikroe STM32F4 board configuration updated for
audio support by Ken Pettit.
* NXP LPC17xx Boards:
- zkit-arm-1769: LED1 is now user controllable after booting. From
Rashid Fatah.
* Kinetis KL Drivers:
- PIT and TPM register definitions header files for the from Alan
Carvalho de Assis.
- Added low-level getc() function for operation with no file system.
The KL25Z can now support NSH in a very minimal system that does
not even have a file system.
* Kinetis KL Boards
- A new configuration called minnsh was added is an experiement to
see how small we can get the NuttX footprint and still support NSH.
From Alan Carvalho de Assis..
* TI Calypso Phones:
- Basic board support for the Motorola C139 (Compal E86) phone. From
Craig Comstock.
* Applications:
- Moved several useful examples from apps/examples to apps/system.
This includes USB MSC, USB CDC/ACM, and USB Composite.
- New addroute and delroute commands added to NSH in order to manage
the network routing table.
- Numerous enhancements and updates to the CC3000 example from David
Sidrane.
- Add a new stack monitor daemon that can be used to constantly
monitor stack usage by all threads.
- Numerous changes to get NSH working with no file system. Basically
this suppresses I/O redirection and replaces file I/O with calls to
low-level console read/write functions. Suggested by Alan Carvalho
de Assis.
- apps/system/nxplayer: A new, command-line media player called
'nxplayer' from Ken Pettit.
- apps/examples/random: Add a simple test that dumps values from
/dev/random.
- apps/examples/adc: Add support so that a ADC driven by software
triggering can be tested.
* Build System:
- The MKDEP tools now support a new argument that identifies the
object file path.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* kconfig-fronted Configuration:
- Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
At this time, only 48% of the configurations have been converted
to use the kconfig-frontends tools.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Initialzation and Scheduling:
- IDLE thread initialization logic should not call group_setupidlefiles()
if there are no file descriptors (and, hence, no file system).
- Fix some cornercase error handling logic: If sched_releasetcb() is
called as part of a failed pthread startup before the flags field in
the TCB has been initialized, then a crash occurs. Pointed out by
David Sidrane.
* Networking / Network Drivers:
- Look up of a device using subnet will fail if the packet is being
sent out of our subnet (via a router). The fallback here is just to
use the only device ("eth0") if the subnet lookup fails (this logic
was extended to handle multiple Ethernet devices by adding a simple
routing table).
- Fix some backward conditional logic in send() that enabled the
check if the ARP address is in the ARP table. From Max Holtzberg.
- Notify the socket layer from the network monitor if a connection is
lost before the monitoring callback has been registered. From Max
Holtzberg.
- send(): Reset the send timeout when the data is ACKed, not when the
data is sent. Remove conditions on checking for timeout. From Max
Holtzberg.
- Correct how the TCP/IP initial minimum MSS is calculated. Max
Holtzberg.
- TCP state machine: Move tcp connection into SYN_RCVD state after
aception instead of bypassing and moving directly into ESTABLISHED.
From Max Holtzberg.
- Numerous fixes to the ENCX24J600 driver from Max Holtberg.
* USB Drivers:
- Change naming of SELFPOWERED and REMOTEWAKEUP to avoid name
collisions. Prepend the name of the driver (for example
CDCACM_SELFPOWERED).
- CDC/ACM class driver: Change the interval for the interrupt
endpoint from 0xff (invalid) to 10. This is not a critical
change but will avoid a complaint from the Linux driver when
it overrides the 0xff value.
* ARM Cortex-A5:
- Fix an error in data cache clean and invalidate functions: Fix of
addresses to cache line boundaries.
* Atmel AT91 SAMA5D3x Drivers:
- Correct some inconsistencies in the way that USB configuration
settings are used. This caused compilation errors in SAMA5 OHCI
when USB debug was ON but USB host tracing was off.
- When 480MHz UPLL is used to drive OHCI, it should have a divider
of 10. However, that does not work. A divider of 5 does. Why?.
- OHCI HCD: Fix a place where DMA-related data needed to be flushed
to data cache; Fix another where a virtual address was being used
in a register where a physical address was required.
- HSMCI Driver: TX DMA disabled. It is just not reliable. No idea
why. RX DMA is still used.
- STM32F103C pinmapping corrections from David Sidrane.
* Atmel SAMA5D3x-EK Board
- Increase the number of pre-allocated watchdog timers. The default
number of 4 was easily being exhausted in the more complex
configurations.
* STMicro STM32:
- STM32 F4 DMA definitions: Typo fixes for UART7 and UART8 DMA
configs. From Mike Smith.
- DMA priority configuration corrections from Mike Smith.
- Changes to the stm32_dmacapable API. In order to correctly
verify that a buffer can be transferred, the transfer count and
the CCR value are required. Implemented stm32_dmacapable for
stm32f1xx devices. Enhanced stm32_dmacapable for stm32f2xx and
stm32f4xx devices to check for additional conditions that will cause
DMA to fail or lose data.
- STM32 F1 DMA fix from David Sidrane: The DMA_CNDTRx register
cannot be modified if the DMA channel is disabled.
* STMicro STM32 Drivers:
- Fix compilation errors from bad bit definitions in ADC and PWM
register. From Martin Lederhilger.
- DMA-related fixes to the SPI driver from Ken Pettit.
* NXP LPC17xx Drivers:
- Remove undefined spi_select() prototype. This was causing compile
time warnings.
* NXP LPC17xx Boards:
- zkit-arm-1768: MMC/SD is on SPI, not SSP0. From Rashid Fatah.
* C Library
- scanf() fixes from kfrolov: 1) sscanf() function hangs in the
following example: sscanf("2", "%u,%u,%u,%u", ...), 2) sscanf()
returns incorrect number of parsed numbers if some arguments
can't be parsed: sscanf("=2", "%u,%u,%u,%u",...)==1 instead of
0, and 3) using of char* instead of const char* in vsscanf
function leads to warnings from GCC.
* Build System
- Dependency generation generation was broken for directories that
keep objects in a sub-directory. The MKDEP tools now support a new
argument that identifies the object file path.
- tools/define.sh: 'cut' no longer works as it once did. Script
adapted to observed behavior.
* Applications:
- Remove a warning from the NSH library when DHCP is not enabled.
- Default NSH IP address should be 0x0a000001 (10.0.0.1), not
0xa0000001 (160.0.0.1). Ditto for the gateway.
- Add some missing options to the OS test Kconfig file
- Fix some bad conditional compilation in the USB monitor.
- Fix default I2C frequency used by the I2C tool: 400KHz instead
of 4MHz. Suggested by Max Kriegleder.
- Increase stack size for the system/info command. Ken Petit
reports that this simple command can exceed its 768 stack size
under certain conditions. The size is marginal and has been
increased to 1024 by default but is also now configurable.
- apps/Makefile: Needs to include external/Make.defs if we want
allow external applications to participate in the NuttX
configuration. Suggested by gdi@embedders.org.
- apps/netutils/telnetd: Missing argument to debug statement
can cause crashes in certain error conditions. From David
Sidrane.
- apps/examples/can: Correct an error in a debug statement. From
Martin Lederhilger.
NuttX-6.32
----------
The 99th release of NuttX, Version 6.32, was made on December 7, 2013,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.32.tar.gz and
apps-6.32.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* General:
- Extension and standardization of stack debug logic. Now includes
coloration of the IDLE and interrupt stacks as well as the heap.
Suggested by David Sidrane.
* Audio Subsystem and Audio Drivers:
- I2S interface definition. Integrates with audio sub-system.
- VS1053 worker thread stack size is now configurable and assigned a
name via pthread_setname_np(). From Ken Pettit.
* Networking / Network Drivers
- Updates and adaptations to support for TI CC3000 wireless module
from David Sidrane. These updates include multi-threading support
and interface and header file changes to integrate more seamlessly
with NuttX applications.
* File Systems:
- procfs: Add support for a tiny procfs file system. The initial
offering is little more that a proof of concept but may be developed
further in subsequent releases.
- NXFFS: An initial attempt was made to integrate NXFFS with the NAND
MTD driver. Changes were made to handle bad blocks. However, I
later realized that NXFFS cannot handle NAND because the way that
is re-writes blocks is incompatible with the NAND ECC handling.
These changes were backed-out so as not to introduce turmoil, but
can be re-enabled if needed via configuration option.
- NXFFS: Make the start up scan of the media a configuration option.
It just takes to long and is not really necessary! Those rare cases
where the scan was helpful can be fixed using MDIOC_BULKERASE IOCTL
command.
* General Drivers:
- I2S: A simple character driver was added to support I2S accesses.
This driver in its current state is intended only to support I2C
testing and would not be appropriate to used for any real driver
application.
* MTD Drivers
- Add a container for an MTD device that can be used to provide a
simple, lightweight interface to configuration data storage that
resides on some storage media that is wrapped as an MTD device.
From Ken Pettit.
- New interface definition for lower half NAND drivers.
- MTD Nand: Add MTD NAND driver that will support ONFI devices,
non-ONFI devices (via table lookup), bad block checking, software
ECC (Hamming), and will interact with the lower-half, hardware-
specific, NAND driver. Based on BSD-compatible Atmel sample code.
- MTD geometry structure is now packed so that it can support larger
erase block sizes needed by NAND without increasing the size of
the geometry structure.
- SST25: Add another SST25 SerialFlash driver, sst25xx.c. This one
differs from sst25.c in that it supports larger SST25 parts: In
the larger parts support page write instead of byte/word writes
like the smaller parts. From Ken Pettit.
* USB Drivers
- STM32 F1 USB Device: Add support for decoded USB trace strings.
From David Sidrane.
* ARM
- Add more ARM9 cache management functions to flush and invalidate
D-Cache for DMA support.
* Atmel AT91 SAMA5D3x Drivers:
- Many new drivers including CAN, PWM, SSC/I2S
- PCK: Add support for programmable clock outputs.
- NAND: Driver with hardware ECC and DMA support
* Atmel AT91 SAMA5D3x Boards:
- SAMA5D3x-EK: Add support for the apps/examples/i2schar test.
- SAMA5D3x-EK: Provides board-specific memory controller initialize
for NAND flash.
- SAMA5D3x-EK: Add support for "auto-mounting" NAND MTD block driver
or NXFFS file system.
* Atmel AT91 SAM3/4 Boards:
- Basic support for the Atmel SAM4E family. From Mitko.
* STMicro STM32:
- Added support for the STM32F429. From Ken Pettit.
- Added support for GPIOK and GPIOJ. From Ken Pettit.
* STMicro STM32 Drivers
- STM32 F4 OTG FS/HS Device: OTG FS device and host drivers extended
so that they can support either the OTG FS peripheral or the OTG HS
peripheral (in FS mode). This was done as a quick way to get USB
support on the STM32F429 which has only OTG HS. From Ken Pettit.
- Added header files and driver framework for the STM32F429 LTDC
framebuffer driver. From Ken Pettit.
* STMicro STM32 Boards:
- Support for the Spark board was completely by Davide Sidrane. The
Spark configuration includes integrated CC3000 wireless support, FAT
file system on the SerialFlash and a composite device that can be
used both to export the FAT file system and to provide a serial
interface.
- The Mikroe-stm32f4 now uses /dev/config for configuration data
storage. From Ken Pettit.
- Added support for the STM32F429I-Discovery board from Ken Pettit.
- Added board support for the ViewTool STM32F103/F107 board with the
STM32F107VCT6 installed.
* NXP LPC31xx Drivers:
- USB ECHI HCD: Add a driver for the low-/full-/high-speed variant
of the EHCI host controller.
* NXP LPC31xx Boards:
- Board-specific USB host support for the Emedded Artists EA3131 board.
(Missing PCA9532 controls).
- Add support for the Olimex LPC-H3131 board. Including USB host
support (which does not depend on the PCA8532 interface).
* Kinetis KL Drivers:
- PWM driver for the Freescale Kinetis KL family from Alan Carvalho
de Assis.
* Kinetis KL Boards
- Freedom-KL25Z: Add PWM support from Alan Carvalho de Assis.
* TI Stellaris LM3S
- Don't initialize .data in start-up logic if not running from FLASH.
* Applications:
- apps/platform: A new home for platform-specific application code.
- Define a common interface that can be used to manage platform-
specific configuration data. From Ken Pettit.
- apps/examples/configdata: A unit test for the MTD configuration
data driver from Ken Pettit.
- Aapps/platform/mikroe-stm32f4: dd platform-specific storage of
configuration data for the Mikroe-stm32f4. From Ken Pettit.
- apps/examples/cc3000: Fine tuning of memory usage from David Sidrane.
- apps/system/nxplayer: Play thread stack size is now configurable.
All NxPlayer threads now have names assigned via pthread_setname_np().
From Ken Pettit.
- apps/examples/i2schar: The I2S test based on the I2S character
driver.
- apps/examples/hidkbd/hidkbd_main.c: Now calls a function named
arch_usbhost_initialize() that must be provided by the platform-
specific code.
- NSH:
- hexdump: Add skip= and count= options to the hexdump command. From Ken Pettit.
- Allow USB trace without a USB console. From David Sidrane.
- Mount command updates from Ken Pettit.
- Add an option to the mkfatfs command to specify FAT12, FAT16, or FAT32.
* Tools
- tools/mkctags.sh: A script for creating ctags from Ken Pettit.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* kconfig-fronted Configuration:
- Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
At this time, only 50% of the configurations have been converted
to use the kconfig-frontends tools.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* File Systems
- FAT: In one error return case, the error return value was not being
set, making the failure look like success. From David Sidrane.
- mount: SMART FS must be included in the conditional compilation for
the set of file systems that require block drivers. From Daniel
Palmer.
- SmartFS: Fixed a minor bug with SMART partition number reporting
that would only be seen if both partition support and multi-root
directory support are enabled at the same time. From Ken Pettit.
- Deadlock: The inode semaphore must be re-entrant. Here is the re-
entrant path that I found: (1) USB host connects to FLASH drive and
creates /dev/sda, (2) /dev/sda is mounted, (3) FLASH drive is
removed but /dev/sda is not destroyed because there is still a
reference on the device because of the mount, (4) umount() is
called, taking the inode semaphore, now the driver tries to destroy
the block driver by calling unregister_blockdriver(). But (5)
unregister_blockdriver() also takes the inode semaphore causing a
deadlock if the inode semaphore is not re-entrant.
- FAT: Fix a typo in the FAT16 formatting logic. Was this ever able to
format a FAT16 volume?
* MTD Drivers
- MTD Partitions: Fix erase block vs page block confusion. From Ken
Pettit
- SST25 Serial Flash: Improved write performance by fixing a bug that
prevented operation in the faster write mode. From David Sidrane.
* USB Drivers:
- USB MSC Device: pthread_join() does not work if called from a
different task group than the pthread. This is correct behavior,
but still a problem. The correct solution would be configure the
USB MSC thread to a task, however, this workaround from David
Sidrane plugs the hole for now.
- USB CDC/ACM, USB MSC, and Composite Device Classes: Un-initialization
logic caused re-use of a stale pointer. Changed to a two pass
un-initialization for the case of the composite driver: Memory
resources are not freed until the second un-initialization pass.
From David Sidrane.
* STMicro STM32 Drivers:
- STM32 F1 USB Device: Fix some errors that cause crashes when the USB
was disconnected. From David Sidrane.
- STM32 F1 USB Device: Correct EP0 state handling logic when buffers
larger than the EP0 packet size are sent. From David Sidrane.
- STM32 F1 USB Device: The long outstanding bug involving the handling
of OUT SETUP commands has been fixed in the STM32 F1 USB device
driver by David Sidrane.
- Kconfig: Add missing setup of CAN TSEG1 and TSEG2 values. From
Martin Lederhilger.
* Tools
- tools/mkconfig.c: SMART FS must be included in the conditional
compilation for the set of writable file systems. Noted by Daniel
Palmer.
* Applications:
- apps/platform/Makefile: Was not dealing with the bin sub-directory
correctly.
- apps/system/composite/composite_main.c: The wrong handle was getting
nullified. From David Sidrane.
NuttX-6.33
----------
The 100th release of NuttX, Version 6.33, was made on January 30, 2014,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-6.33.tar.gz and
apps-6.33.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS Interfaces
- nanosleep() added. sleep() and usleep() are no longer core OS
interfaces. These have been moved into the library and re-implemented
as simple wrappers around nanosleep().
* File Systems
- procfs restructured by Ken Pettit. Added files for MTD status.
- procfs extended to show uptime and task group status.
- procfs now shows stack information.
* Networking
- Add support for the SO_LINGER socket option. Extended from logic
provided by Jason Jiang. Enabled with CONFIG_NET_SOLINGER.
- TCP write buffering support added. From Jason Jiang.
- Changes from Max Holtzberg to improve how network status is
reported. New controls to manage carrier detect.
* Graphics
- Massive reshuffling of files with little or no logic changes. This
reshuffling was necessary to build graphics applications with the
kernel builds where the graphics application lie in user space and
the core graphic server likes in kernel space. Moved much logic out
of nuttx/graphics to a new user library, libnx.
* Cortex-A5/A8/A9
- Existing Cortex-A5 support updated to include Cortex-A8/9.
- Add the syscall.h header file needed for the Cortex-A architecture.
- Start-up logic now supports execution from FLASH with .data and
.bss in SDRAM. This was not possible prior to this because .bss
and .data were initialized before SDRAM was configured.
* Allwinner A10:
- Basic support for the Allwinner A10 (Cortex-A8) is in place.
* Allwinner A10 boards
- Support for the pcDuino v1 board has been added. This support
is not yet very mature and still lacks many drivers. It is a
good starting point, however, if anyone wants to develop A10
support.
* Atmel SAMA5D3X
- Start-up logic now supports execution from FLASH with .data and
.bss in SDRAM. This was not possible prior to this because .bss
and .data were initialized before SDRAM was configured.
* Atmel SAMA5D3X Boards
- Partial logic in place to support the OV2640 camera. Still needs
quite a bit of additional logic to be useful.
* ARMv7-M
- Add support for high priority, nested interrupts. This change
effects not only core ARMv-7M logic, but all ARMv7-M MCU logic:
LM3S, LM4F, LPC17xx, LPC43xx, SAM3, SAM4, and STM32. See
http://www.nuttx.org/doku.php?id=wiki:nxinternal:highperfints
* STMicro STM32
- Add clocking support for STM32F107 USB OTG FS (which does not yet
work)
- Single-wire UART support for the F1 series from Thomas Grubler.
* STMicro STM32 Boards
- The Viewtool board can now be configured to support either the
STM32F103VCT6 or the STM32F107VCT6.
- The Viewtool STM32F107VCT6 now supports networking with the
DP83848C module installed.
- Add support for Viewtool SSD1289-based LCD on the Viewtool
STM32F103VCT6 board (untested)
- Add support for the XPT2046 touchscreen controller on the Viewtool
LCD module connected to the Viewtool STM32F103 board.
- Added kernel mode build support for the STM3240G-EVAL board. Added
a new kernel mode NxWM build configuration
- C++ static constructor logic from the nuttx/configs/stm3240g-eval/
directory to the apps/platform/stm3240g-eval/up_cxxinitialize.c
where is belongs so that it is available in user-space in the kernel
mode build.
- Add native Windows build support for the Olimex STM32 P107. From
Max Holtzberg
- Support for the STM32VL-Discovery board. Contributed by Alan
Carvalho de Assis
- Added a configuration for testing simple configurations on the
PX4FMU v2.
* ZiLOG ZNEO Boards
- Add an NSH configuration for the Z16F2800100ZCOG ZNEO board.
- Added support for the Toyaga 16Z ZNEO board. The 16Z board is
based on the ZiLOG ZNEOZ16F2811AL20EG part. See
https://github.com/toyaga/16z for further information
- Developed a patch to work around a compiler error that is revealed
when building the NSH configuration.
* Architecture-Independent Drivers
- OV2640 Camera Driver.
- Support for the Sharp Memory LCD from Librae.
* Library
- Pattern matching logic extended to handle set of characters and
ranges of character values. From Ken Pettit.
- sleep() and usleep() moved intot the C library. These are not
longer core OS interfaces; they are simple wrappers for the
nanosleep().
- Add an implementation of gets_s().
- Extend fopen() to include support for C11 exclusive open ("x")
open mode.
- Add an implementation of stpcpy()
- strtol(), strtoll, strtoul(), strtoull(), and strtod() from
libc/string to libc/stdlib where they belong.
* Header Files
- Add rsize_t to include/sys/types.h
- Add the C11 thread.h header file
* Configuration/Build System
- Top level Makefile now supports qconfig and/or gconfig targets that
may be used for configuration. These may be used if you build
kconfig-frontends with support for kconfig-qconf and/or
kconfig-gconf.
- Add CONFIG_DEBUG_NOOPT. Now you can independently enable/disable
debug symbols and optimization
- File system related header files moved to include/nuttx/fs
- Video related header files moved to include/nuttx/video
- Changes for native Windows build: fix creation of a .version file
if one does not exist. Make sure that the APPDIR environment
variable is set before configuring. From Max Holtzberg.
- Board configuration sub-directory can now be specified. The default
need not be used. This is only useful when CONFIG_ARCH_BOARD_CUSTOM
is selected and there is no meaningful default sub-directory.
- Many functions renamed to better conform with the naming standard:
up_buttoninit() renamed to board_button_initialize(), up_buttons()
renamed to board_buttons(), up_irqbutton() renamed to
board_button_irq(), up_ledinit() renamed to board_led_intialize(),
up_ledon() renamed to board_led_on(), and up_ledoff() renamed to
board_led_off(). All prototypes removed from board.h header files.
Now ONLY prototypes in include/nuttx/arch.h.
* Applications
- NSH: Refactor. Separate NSH command handling and command execution
from NSH line parsing.
- NSH: Will now support multiple commands on a command line, each
separated with a semi-colon.
- NSH: Add support of commands enclosed in back quotes as command
arguments.
- NSH: Can now handle arguments that are concatenations of constant
strings, command return data, application return data, and
environment variables.
- NSH: Add true and false commands.
- NSH: Add support for while-do-done and until-do-done loops. These
only work when executing a script file because they depend on the
ability to seek in the file to implement the looping behaviors.
Can be conditionally compiled out to reduce footprint.
- NSH: Loosen up if-then-else-fi syntax to allow a command to be on
the same line as the then or else tokens like:
"if true; then echo true; else echo false; fi". More like bash.
- NSH: Add a break command that can be executed with a loop to
terminate the loop immediately.
- system/inifile: A simple .INI file parser.
- system/vi: Add support for a tiny, VI work-alike editor. This is
a minimal full screen editor that works with a terminal emulator
that using VT100 commands.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* kconfig-fronted Configuration:
- Conversion of old configurations to use the kconfig-frontends
tool is an ongoing effort that will continue for some time.
At this time, only 53% of the configurations have been converted
to use the kconfig-frontends tools.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Core OS
- Added missing sem_timedwait() system call.
* Networking
- Prevent tcp_connect callback from being double freed. From Max
Holtzberg
- uiplib: Support new definitions and state passing for network
device status. From Maz Holtzberg.
* File Systems
- FAT: (1) A correction to FAT cluster allocation, and (2) Fix to some
root directory logic that was conditionally done only for FAT 32.
Apparently this needs to done for all FAT types. Both from Andrew
"Tridge" Tridgell via Lorenz Meier.
* Binary Formats
- Fix a small memory leak when attempting to load a program from a file.
* Cortex-A8/9
- Fix some errors in the cache invalidation logic (only seem to matter
for Cortex-A8).
- Add more nop's after enabling the MMU. The cortex-a8 seems to need
these
* Graphics
- Fix a typo that caused a compilation error when
CONFIG_NXCONSOLE_BPP < 8. From Librae
* ARMv7-M
- Correct alignment of RAM vector table.
- Interrupt handling: Do not disable and enable the IRQ on each
entry, (2) this interferes with controlling the IRQ interrupt
setting from interrupt handlers, and (3) up_disable_irq() does
not work anyway so that this has never done anything.
- Fix all implementations of up_disable_irq() for all Cortex-M3 and
M4 architectures: To enable an interrupt on the Cortex-M3/4 CPU,
you need to set a bit in the ISER register. To disable the
interrupt, you need to set a bit in the ICER register. Existing
logic was trying to disable interrupts by clearing the bit in the
ISER register. That will not work; writing a '0' to the ISER
register has no effect. That means that up_disable_irq() was
doing nothing! It turns out that that is not really important
because up_disable_irq() is not really used for that purpose. But
some spurions STM32 ADC interrupts have been reported to me and this
turned out to be the cause in that case. Thanks to Manuel St<53>hn for
the tip.
* STMicro STM32
- Fix configuration and pin definitions that would prevent building
USB for the connectivity and performance lines.
- STM32L15xx: Fix a typo in USB pin definitions
- Fix pin definition names for SPI2 MOSI and MISO. Noted by Brian Webb
- Various fixes for STM32F103ZE SPI3 pin mapping definitions. From
Steve Redler IV
* STMicro STM32 Boards
- Olimex STM32-P107: Failed to build if SPI3 for UEXT is not remapped.
From Max Holtzberg
* x86 Boards
- Add a configuration option to select the -m32 compiler option when
building for a 32-bit target on a native 64-bit compiler. So far,
only used for the qemu/i486 configuration.
- Patch from Matt Campbell to fix 'Error: .size expression for idle_stack
does not evaluate to a constant".
* Library
- strftime(): Needs null termination on the generated string. From
Max Holtzberg.
- Typo in ctype.h macro name: iscntrl(), not iscontrol().
- If there are no arguments (argc == 1), then getopt() will leave the
optind variable in an undefined state (2014-1-20).
- ARMv7-M memcpy(): Assembler changes with the gcc-47 distribution
from ARM mean that we need to be explicit about branch sizes; one
or more of the wide branch opcodes results in bad table branching.
From Mike Smith.
* Configuration/Build System
- Fixes for some tools/ for Windows build issues from Max Holtzberg.
- Config.mk: 'cypath' must be called if we are using a Windows native
toolchain with the Cygwin 'make' to convert paths to proper
Windows paths. From Richard Cochran.
- ARM Makefile: Dependency directory list is now computed from the
VPATH. From Richard Cochran.
- builtin/Makefile: Fixes for native Windows build from Max Holtzberg.
- Refactor some configuration dependencies: NSH networking features
should depend on netutil selections; netutil selections, in turn,
should depend on networking selections.
* Applications
- NSH: Modified the df -h logic to eliminate truncating numbers in
conversion (like 7900 -> 7M). From Ken Pettit.
NuttX-7.1
---------
The 101st release of NuttX, Version 7.1, was made on March 15, 2014,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.1.tar.gz and
apps-7.1.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
The previous NuttX version was 6.33. The NuttX minor version number is
incremented on each release, but the major version number is incremented
only when an incompatibility with previous versions is included in the
release. In this case, the legacy, manual configuration is no longer
supported by the NuttX build system beginning with NuttX 7.1. Only the
newer configurations generated by the kconfig-frontends tools will generate
viable NuttX configurations.
All board configurations in the NuttX source tree have been converted to
use the newer configuration, but if you have some older style configurations
for you board, you will need to convert those configurations to use the
kconfig-frontends tools before taking any new code from the repository. See
http://www.nuttx.org/doku.php?id=wiki:howtos:convertconfig for some
guidelines.
Additional new features and extended functionality:
* Core OS:
- System time logic now includes logic to measure and calculate the
CPU load percentage (from David Alessio). This CPU load logic
extended to keep counts on each thread. The per-thread CPU is
now reported in the procfs under <pid>/loadavg An asynchronous,
"external" clock may be used to drive the CPU load calculations
for more accurate measurements when needed.
* File Systems:
- As mentioned above, the per-thread CPU load information is now
reported in the procfs under <pid>/loadavg.
- Many file system interfaces have been extended to operate on the
top-level NuttX pseudo filesystem. These include rmdir, mkdir,
rename, and unlink. This capability can be disabled with
CONFIG_DISABLE_PSEUDOFS_OPERATIONS in order to keep the footprint
small.
* Networking:
- Numerous updates and improvements to the CC3000 driver from David
Sidrane.
* Common Drivers:
- Defined a mouse interface that is very similar to a touchscreen
interface, but allows reporting of all mouse buttons. Also, unlike
touchscreen drivers, mouse drivers need to report positional data
with no button is pressed so that the mouse position can drive a
cursor.
- Added support for a USB HID boot mouse device. Cursor support is
not integrated and must be provided by the application based upon
the reported mouse data.
- Support added for the MIO283QT9A LCD from Toby Duckworth.
* Atmel SAMA4E:
- Added complete architecture support for the Atmel AT91 SAM4E
Cortex-M4F parts.
* Atmel SAM4E Board Support:
- Add board support for the SAM4E-EK board.
* Atmel SAM4E Drivers:
- Added logic to manage the Cortex-M Cache Control block.
- Developed and integrated an Ethernet MAC driver for the SAM4E.
- Backported the SAMA5 SPI driver to the SAM3/4 architecture. The
SAMA5 version supports both multiple SPI peripherals as needed by the
SAM3A and SAM3X and also supports DMAC (but not PDC) needed by the
SAM4E.
* Atmel SAM D20:
- Added basic architecture support for the Atmel AT91 SAM D20
Cortex-M0+ parts.
* Atmel SAM D20 Board Support:
- Added basic support for SAM D2 Xplained Pro board. Currently, the
NuttShell (NSH) works reliably over a serial port. An SPI driver
has also been developed. Work with the SAM D20 has been temporarily
stopped, however, in order to focus on the SAM4E-EK.
* TI Tiva TMC4C123G:
- Added architecture support for the TI Tiva TM4C123G parts. This was
merged into the existing support for the LM3S and LM4F families.
All directory, file, and function references changed from lm to tiva.
* TI Tiva TMC4C123G Board Support:
- Added basic board support for the TM4C123G-Launchpad. As of this
release the TM4C123G-Launchpad board support is untested and likely
incomplete.
* STMicro STM32 Boards:
- The Mikroe STM32F4 can now support the newer MIO283QT9A LCD. From
Toby Duckworth.
- Miscellaneous changes to better support FPU on STM32F429 Discovery
from David Alessio.
* NXP LPC2378 Drivers:
- Incorporated I2C and SPI drivers for the LPC23xx from Lizhuoyi.
* QEMU i486 Drivers:
- New QEMU keyboard and VGA drivers from Lizhuoyi.
* Documentation:
- Added a coding standards document. See
http://www.nuttx.org/doku.php?id=documentation:codingstandard
* Configuration/Build System:
- A configuration option, CONFIG_DEFAULT_SMALL, was added to select
default values for configuration variables based upon whether you
want a smaller footprint or more features. This is not very useful
if you are modifying existing configurations because then the
default values do not apply.
- CONFIG_DEFAULT_SMALL has been defined on all tiny MCU configurations
so that they do not grow so rapidly when new, optional features are
added.
- The legacy, manual configuration is no longer supported by the
NuttX build system. Only the newer configurations generated by
the kconfig-frontends tools will generate viable NuttX
configurations. All board configurations in the NuttX source tree
have been converted to use the newer configuration, but if you have
some older style configurations for you board, you will need to
convert those configurations to use the kconfig-frontends tools. See
http://www.nuttx.org/doku.php?id=wiki:howtos:convertconfig for some
guidelines.
* Applications:
- NSH can now use an EMACS-like command line editor. This CLE, is
really more like the traditional readline than is the default, tiny
the NuttX readline .
- The touchscreen example can now be configured to work with either a
touchscreen or a mouse device.
- Several NSH commands can now be used to operate on objects in the
top-level pseudo-filesystem: rmdir, mkdir, mv, and rm. This
capability can be disabled with CONFIG_DISABLE_PSEUDOFS_OPERATIONS
in order to keep the footprint small.
- If both the CPU load feature and the procfs features are enabled,
then the NSH 'ps' command will show the CPU load used by each
thread.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Core OS:
- task_terminate() always returned an error because the return value
was not being set correctly (from Gosha).
- nanosleep() Fix a missing call to re-enable interrupts (from Jason
Jiang).
* File Systems:
- Fixed an error in the FAT logic that can cause file corruption. The
error conditions are rare and only seen with very large files (from
Andrew Tridgell). This replaces a previous, partial fix for the same
problem.
- Fixed memory leaks in the NXFFS open() and stat() implementations
(from Lzyy).
- The interfaces include opendir(), readdir(), et al, were modified so
that errors will not be reported if you attempt to list a empty
pseudo-directory.
* Networking:
- Fix one place where the connection reference count was not being
decremented in the socket close() logic. This is really a cosmetic
change BUT when CONFIG_DEBUG_NET is enabled, it will cause assertions.
- Backed out a small part of the NuttX 6.33 write buffering changed.
David G says that this causes problems in connecting to a server.
- In DHCPD, there was a place where the logic was calling ntohl()
inappropriately; the address was already in the correct order. How
could DHCPD have worked with this bug?
* TI Tiva/Stellaris Drivers:
- Fixed cut'n'paste error that prevented UARTS2-7 from being used with
the LM4F120 Launchpad.
- Fixed several errors there were unmasked with UARTs > UART2 are
enabled (grom Gosha).
* Allwinner A10 Drivers:
- Fixed cut'n'paste error that prevented UARTS2-7 from being used with
the pcDuino.
* NXP LPC17xx Drivers:
- Fix an compilation error that crept into the LPC17xx USB host driver.
* STMicro STM32 Drivers:
- Fix cloned typo in the serial driver: FLOWCONTROL vs FLOWCONROL.
- Disable SPI before changing DPI CR1 register (from David Sidrane).
- stm32 TIM: Set the timer CCMR when selecting timer channel. From
David Sidrane.
- Fix typo in a Makefile: stm32_pwm.c not stm32_psm.c. Noted by Max
Kriegleder.
* Library:
- More sscanf() bug fixes from David Sidrane.
* Header files:
- cstdbool: Ignore _Bool8 if CONFIG_C99_BOOL8=y
* Configuration/Build System:
- Several changes to restore the broken native Windows build
* NuttShell (NSH):
- Use strncpy vs strcpy in the Telnet console logic to avoid
overruning the username and password buffers (from Bertold Van den
Bergh).
- Add a newline after printing the file in the 'cat' command. This
prevents the NSH prompt from be in the same line as the final line
of the file in the case where there is no newline at the end of the
file.
NuttX-7.2
---------
The 102nd release of NuttX, Version 7.2, was made on April 29, 2014,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.2.tar.gz and
apps-7.2.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS:
- Add support for CLOCK_REALTIME. From Macs N.
* Network Utilities:
- Add a very primitive NTP client.
- DNS resolver: Long needed major clean up for coding style and
unification of naming conventions (resolv vs dns).
* Common Drivers:
- Add a new MTD driver that can be used to contain another driver and
force its apparent sector size to be 512 bytes.
- If DCD can support queuing of stall requests, then the USB MSC stall
work around delays are not necessary.
- Redesign threading module used with the USB MSC driver. It was using
pthreads before and these were changed to a kernel thread. The reason
for this has to do with task grouping: A pthread is a memory of the
group of the task that started it. A kernel thread is independent of
the task that started in (other than knowing it as the parent). This
allows me to remove so kludge logic to "deparent" the pthread on
startup.
- Update the MIO183QT-9A LCD driver to support reading from the LCD.
From Toby Duckworth.
- Timer "upper half" driver and l"lower half" interface definition from
Bob Doiron.
* Atmel SAM4E/4S Board Support:
- All SAM4E configurations updated to run with 120MHz CPU speed and
with the CMCC enabled.
- Support for the SAM4S Xplained Pro board from Bob Doiron.
- Add watchdog driver. From Bob Doiron.
* Atmel SAM4E/4S Drivers:
- Add a USB full speed device driver (UDP) for the SAM4E.
- Add support in HSMCI and SPI drivers to invalidate cached memory if
the CMCC is enabled.
- Add logic to handle SPI word widths > 8
- Port RTC driver from SAMA5 to SAM3/4. From Bob Doiron.
- HSMCI: Extensions from Bob Doiron needed to support PDC-based HSMCI
DMA transfers. Verified on the SAM4S Xplained Pro.
* Atmel SAMA5:
- Add support for the SAMA5D36 chip.
- Add functions to calculate PLLACK, PCK, and MCK frequencies given
the main clock frequency.
- Implemented RAM functions. When booting directly into NOR flash,
reconfiguring the PLL while executing out of NOR FLASH causes
crashes. This was fixed by David Sidrane by implementing RAM
functions. The killer code is copied and executed from ISRAM and
the crash is avoided.
* Atmel SAMA5 Drivers:
- Add support for the SAMA5D3 DBGU.
* Atmel SAMA5 Board Support:
- Add a board support configuration for the Atmel SAMA5D3 Xplained
board running out of SDRAM. When booting from SDRAM, start-up logic
needd to query the PMC registers to determine the MCK, PCK, etc.
- For all SAMA5 boards, added support for 528MHz clocking.
* TI Tiva/Stellaris:
- Modify the logic to disables the interrupts and sets the default
interrupt priority so that it uses the ICTR to get the number of
interrupt lines/registers. This is instead of using some fixed
number of initializations based a priori knowledge of the number
of interrupt lines in the MCU.
* STMicro STM32
- Add support for the STM401RE. From Frank Bennett.
* STMicro STM32 Boards:
- STM32F4Discovery: Add support to register keyboard and mouse
classes if so configured. From Leo.
- Add support for the Nucleo-F401RE board. From Frank Bennett.
* STMicro STM32 Drivers:
- Add STM32 Ethernet IGMP hashing support. From Manuel St<53>hn.
- OTG FS Host: USB host tracing added by Leo.
* Freescale Kinetis
- Modify the logic to disables the interrupts and sets the default
interrupt priority so that it uses the ICTR to get the number of
interrupt lines/registers. This is instead of using some fixed
number of initializations based a priori knowledge of the number
of interrupt lines in the MCU.
* NXP LPC17xx
- Modify the logic to disables the interrupts and sets the default
interrupt priority so that it uses the ICTR to get the number of
interrupt lines/registers. This is instead of using some fixed
number of initializations based a priori knowledge of the number
of interrupt lines in the MCU.
* ZiLOG ZNEO Drivers
- Added ZNEO ESPI driver.
* Library:
- Finish incomplete support for ferror(). From Macs N.
* Documentation:
- UsbTrace.html: Add some discussion of the USB monitor.
* Configuration/Build System:
- compiler.h: Add macro UNUSED() that can be used to eliminate
warnings about variables that are set to values that are not
used.
* Debugging Support:
- Add a configuration option to enable dumping of the USB trace buffer
on assertion.
* Applications:
- IGMP Example: Fill out Kconfig file; update makefile so that the
IGMP example can be used as an NSH built-in application. From Manuel
St<53>hn.
- lcdrw Example: Fill out empty Kconfig file.
- touchscreen Example: Add a configuration option to indicate if
architecture-specific initialized is required, yes or no.
- System usbmsc: Back out the USBMSC daemon... it is no longer needed
with the recent fix to the USBMSC class driver.
- NSH: malloc/free IOBUFFER for 'cat' and 'hexdump' commands instead of
using the stack. From Bob Doiron.
- cpuhog, serialblaster, and serialrx Examples: Stress test examples
added by Bob Doiron.
Bugfixes (see the ChangeLog for details). Some of these are very important:
* Core OS:
- errno_get_errno_ptr() and getpid(): Add some checks. If these
functions are called very early in initialization before the tasking
structures are initialized, they would not behave properly.
* Networking:
- IGMP-related bug fixes from Manuel St<53>hn.
- In netdev_findbyaddr(), skip network devices that are in the "down"
state. It does not make sense to consider an address match with a
"down" device. From Brennan Ashton.
* Network Utilities:
- DHCPD: The correct value of the PAD option. Should be zero, not
one. From Brennan Ashton.
- Corrections to the NTP client from Manuel Stuehn.
* Common Drivers:
- usbhost.h: Fix some USB HID-related conditional compilation. From Leo.
- USB HID mouse driver: Don't include NAKs from the device in the error
count. From Leo.
* TI Tiva/Stellaris:
- Add corrected control logic for TM4C125GXL based on logic from Daniel
Carvalho with modifications. The LM4F120 also works well with this
change.
* STMicro STM32 Drivers:
- STM32 F2 SPI: Correct a mapping for SPI MOSI pin. From dlsitzer.
- OTG FS Host: Fixes related to low-speed devices and interrupt
endpoints from Leo. Necessary in order to use a USB HID mouse
device.
- STM32 SDIO: The dmaflight method must be conditioned on
CONFIG_SDIO_PREFLIGHT. Noted by Pelle Windestam.
- Sourceforge Ticket #26. up_prioritize_irq should not be called
if CONFIG_ARCH_IRQPRIO is not defined.
* Atmel SAM3/4:
- Fix some backward conditional compilation in the start-up logic.
- Fix initialization of the default interrupt priorities. This is
a critical bug fix!
- SAM4S: Fix error in macros that disable peripheral clocking. From
Bob Doiron.
* Atmel SAMA5:
- Fix double mapping of SDRAM when executing out of SDRAM. In this
case, the SDRAM was already mapping in arm_head.S.
- In clock configuration, the BMS bit handling was fixed to match
what the HW really does. From David Sidrane.
- TLB Bufferable bit did not do what I thought it was going to do.
I though I was selecting a write-through cache, but the result was
that all caching was disabled and NOR FLASH accesses were very slow.
- Move the un-definitions of __ramfuncs__ from the clock configuration
.c file to the .h file. Otherwise, the attribute will be applied
differently for the prototype and the function definition.
Sourceforge patch 38 from Luciano Neri.
* Atmel SAMA5 Drivers:
- Fix a case in the UDPHS driver where received status was not being
cleared, causing OUT SETUP commands to fail.
- TWI data sending fails to increment the number of byes transferred
on first byte sent. from David Sidrane.
- If running from SDRAM, then BOARD_MCK_FREQUENCY is not a constant
and cannot be used in conditional compilation. All drivers fixed
EXCEPT for the PWM and Timer/Counter drivers which will need some
more extensive redesign.
* Atmel SAMA5 Boards:
- SAMA5D3x-EK: The red LED is controlled by PE24 which is also the
camera/ISI interface reset line. So if the a camera is installed,
then we must avoid controlling the red LED or we inadvertently
also reset the camera module. Noted by David Sidrane.
- Header files reference type xcpt_t in certain configurations and
so must include nuttx/irq.h. This is Sourceforge bug 25 submitted
by Luciano Neri.
* NXP LPC17xx Drivers
- arm/src/lpc17xx/Kconfig and lpc17_ethernet.c: The default interrupt
priority should be default, not the highest priority (2014-4-19).
* ZiLOG ZNEO
- Fix calculation of timer reload and prescaler. The timer frequency
was way too fast.
* Library:
- strncpy(): Change ordering of test and copy. Logic would have
failed if n=0; one byte was always copying before testing
for the end of the copy.
- Fix a counting error in the return value from sscanf(). Noted by
kfrolov. Also, sscanf() should return EOF if no values were
converted.
- Fix a logic error in ftell(). It was simply using the file offset
and did not take into account data buffered in memory. From Macs N.
- sccanf(): Use stroul() vs strol() with %u format otherwise, range
of values is restricted because of sign bit. From kfrolov.
* Configuration/Build System:
- Fix a build error that occurs when only USB device tracing is enabled.
* NuttShell (NSH):
- Fix NuttShell version number display in the NSH welcome message.
version.h was not being included.
* Other Applications:
- sysinfo: CONFIG_VERSION_BUILD is a string an needs to be
printed with %s, not %d. Noted by Librae.
- nxplayer: Compilation failure in one configuration reported by
Manuel Stuhn.
- System sdcard: Remove an STM32 dependency. From Bob Doiron.
- telnetd Example: Naming is confused. In someplaces 'telnetd',
and in others 'shell.' All changes to telnetd. Noted by Pelle
Windestam.
NuttX-7.3
---------
The 103rd release of NuttX, Version 7.3, was made on June 25, 2014,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.3.tar.gz and
apps-7.3.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS:
- Dynamic loader: Framework to support Pascal P-Code as a binary
format that can be exec'ed from a file system.
- Dynamic Loader: Extend the binfmt interface to handle error
conditions where format-specific clean-up is needed in the event
of error conditions. This is needed by the P-Code binfmt.
* Networking
- IOB: Add a generic I/O buffer chain logic. This logic uses small,
pre-allocated buffers that can be chained together to support
transfers of any size, using fewer resources and also without
committing in advance to a TCP window size. There is now only
one I/O type used in the networking and it is these I/O buffer
chains.
- TCP Write Buffering: TCP write buffering logic converted to use
I/O buffer chains.
- TCP Read-Ahead Buffering: TCP read-ahead buffering logic converted
to use I/O buffer chains.
- Includes logic to support throttling of read-ahead buffering if
the read-ahead buffering is competing with write buffering for
I/O buffers.
- Raw Sockets: Add support for the AF_PACKET socket family. From
Daniel Lazlo Sitzer.
* Common Drivers:
- W25 Serial FLASH driver extended by Mark Whitehorn to support the
8Mbit W25Q80BV part.
- Add support for Fujitsu MB85RS1MT RAMTRON part. From Charles Ash.
- Enhancements to the generic timer interface to support capture mode
from Bob Doiron.
- Add an rxflowcontrol method to the serial interface to better
support RX flow control. This involves common changes in addition to minor updates to all MCU-specific serial drivers (only fully implemented for the STM32). From Jussi Kivilinna.
* Atmel SAM4C
- Add support for the SAM4CM family. From Max Neklyudov.
* Atmel SAM4E/4S Drivers:
- RTT driver from Bob Doiron. Also added high resolution RTC
emulation using the RTT for the sub-second counter.
* Atmel SAM4E/4S Board Support:
- The SAM4S Xplained Pro now uses the extended timer/counter
features. From Bob Doiron.
- Added a touchscreen and LCD driver for the SAM4E-EK board (the LCD,
however, not yet fully functional).
* Atmel SAMA5:
- Optimized, high performance, assembly language memcpy(). This is
the same optimized memcpy() function that Mike Smith brought in
for the ARMv7-M with minor tweaks by David Sidrane to work with
the ARMv7-A.
- Basic support added for the SAMA5D4 family.
* Atmel SAMA5 Drivers:
- SAMA5D4: New drivers unique to the SAMA5D4: XDMAC, SAIC, and
others.
* Atmel SAMA5 Board Support:
- SAMA5D4-MB: Initial board support for the SAMA5D4-MB/EK boards.
* STMicro STM32
- Add support for the STM32152 and STM32162 Medium+ density parts
(plus miscellaneous other improvements to the original STM32151
logic). From Jussi Kivilinna and Sami Pelkonen.
* STMicro STM32 Boards:
- Support for the Olimex STM32 H405 board contributed by Martin
Lederhilger.
* STMicro STM32 Drivers:
- Implement the rxflowcontrol method to the serial interface to better
support RX flow control. From Jussi Kivilinna.
* NXP LPC17xx Drivers:
- Added support for the RTC, ADC, DAC, Timers, PWM and MCPWM
drivers. From Max (himax).
* NXP LPC17xx Boards:
- Support for the RTC, ADC, DAC, Timers, PWM and MCPWM integrated
in the LPCXpresso LPC1768 board support. From Max (himax).
* Library:
- Add support for seek-able streams.
* Configuration/Build System:
- Restructured network directories, header files, and naming to
better modularize the networking and to better integrate the
networking with the rest of NuttX.
* Applications:
- prun: An NSH built-in application that can be used to run
Pascal P-Code programs either programatically or from the NSH
command line.
- netpkt: A "raw" socket test from Lazlo Sitzer.
- hex2bin: A library and built-in task to convert from
Intel HEX to binary format. It can write the binary data to a file or it can store the binary data to memory (to support, for example, a loader).
Bugfixes. Only the most critical bugfixes are listed here (see the ChangeLog for the complete list of bugfixes and for additional, more detailed bugfix information):
* Core OS:
- Dynamic Loader: Fix an error in a symbol table search function.
Noted by Pelle Windestam.
- Dynamic Loader: Fix a critical error in exec(); argv was not
being passed.
- mq_notify: Test for a valid signal number was inverted; this
function could not have been working correctly before??? From
eero.nurkkala.
- Fix typo in conditional compilation: CONFIG_CLOCK_MONOTONIC vs.
CLOCK_MONOTONIC. From Manuel St<53>hn.
* Graphics
- Fix typos in several RGB conversion macros.
* Networking:
- Modify TCP timout handling to provent situations where connections
may not be freed. From Max Holtzberg.
- Improved TCP fallback allocation logic from Max Holtzberg. Also,
fallback mechanism is disabled when SO_LINGER is to prevent
deadlocks.
- Write Buffering: Add checks from buffer allocation failures. From
Max/Himax.
* Network Utilities:
- webserver: httpd_fs_open() should return OK on success and ERROR on
failure, not 1 and 0.
* Common Drivers:
- Make sure that all references to up_prioritize_irq() are
conditioned on CONFIG_ARCH_IRQPRIO. Problem noted by Mike Smith.
- CC3000: Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi
Kivilinna.
- CC3000: Fix a race condition in thread start-up logic. From Jussi
Kivilinna.
- CC3000: Additional fixes including a compilation failure if POLL is
enabled. From Jussi Kivilinna.
* USB Drivers:
- CDC/ACM and PL2303 device: Reset RX head to avoid resending last
serial data when USB cable disconnected/re-connected. From
Lizhuoyi.
* TI Tiva/Stellaris Boards:
- The Nucleo-F401RE has no on-board crystals and, hence, needs to run
with the PLL input from the on-chip HSI clock.
* STMicro STM32 Drivers:
- Serial: Handle configuration for the case of 8-bit data with
parity. From Freddie Chopin.
* Atmel SAM3/4 Boards:
- There was a cloned error in all SAM3/4 board configurations (and
for a few other architectures as well). Button interrupts not
being disabled after being detached. As a result, unexpected
interrupts could be received after the button interrupt was
detached.
* Atmel SAMA5:
- Fix some critical typos in the SAMA5D3 DMA definitions.
* STMicro STM32 Drivers
- I2C: Add an alternative I2C implementation for the STM32 F103 that
works around errata in that specific part. From Patrizio Simona.
- RTCC: Add retry logic to RTC initialization. It sometimes takes
longer for the RTC to initialize, at least as noted on an F2 part.
From Daniel Lazlo Sitzer.
* NXP LPC17xx Drivers
- GPDMA: Fix an error when DMA is started: The read-modify-write
fails when the DMA is started. This is because the value read is
not the same as the value set (on write it is the number of
transfers to do; on read it is the number of transfers completed).
From Lizhuoyi.
* Library:
- snprintf(): If the size passed to snprintf() is zero, then
snprintf() must write nothing, but instead return the size of the
buffer needed to hold the entire string. From Sami Pelkonen.
* Configuration/Build System:
- The alternate console device CONFIG_NSH_CONDEV must not be defined
unconditionally. This causes errors when using Telnet sessions.
This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if
enabled, CONFIG_NSH_CONDEV provides the alternative console
device name.
- Many files: Convert all old-style GCC variadic macros to the C99
form. Recent GCC changes tightens up that behavior and can cause
some problems (at least for the IAR compiler for some reason).
Noted by Bob Grimes.
- tools/configure.sh: In-place SED edit messes up permissions on
windows. From Hannes Delago.
* Build Tools:
- tools/mkfsdata.pl: Apparently, the trailing the 0x00 in http
server files is seen as a bug in javascript and images. From
Max/Himax.
* Other Applications:
- I2C Tool: Fix to show the updated register address on each
fetch (vs. showing the same starting address each time). From
Ryan VanSickle.
- CLE was not returning the terminating newline character. But
reported by Max kriegleder.
NuttX-7.4
---------
The 104th release of NuttX, Version 7.4, was made on August 15, 2014,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.4.tar.gz and
apps-7.4.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS:
- Beginnings of a crypto/ subsystem from Max Neklyudov
- Tickless operation: NuttX now supports a mode with no periodic
timer interrupts. Rather, timed events are handle via an interval
timer. This (1) lowers the rate of interrupt processing to timer
events, (2) gives much high timing resolution, and (3) allows lower
power modes of operation where the CPU is not constantly being
interrupted by the timer.
- Restructured the OS files under sched/ to better support the already
modular nature of the RTOS.
* Networking
- Substantial directory and header file reorganization and renaming to
make the NuttX networking implementation more modular.
- Add network device ioctl to access PHY registers. From Daniel Lazlo
Sitzer
* Binary Loader:
- Various changes associated with symbol tables from Pelle Windestam.
* Graphics:
- colorcmp(): New utility to compare two colors.
- The initial background color is now configurable. Includes logic to
eliminates multiple background updates to get the right color.
- Minor configuration changes to handle mouse X/Y and touchscreen
X/Y differently.
* File System/Block Drivers:
- SmartFS: Increase some variables from uint16_t to uint32_t to handle
larger device sizes. From Ken Pettit.
- Add configurable AES encryption support to the block-to-character
(BCH) driver. This allows any block device to be accessed as an
encrypted character device. From Max Nekludov
- Add an MTD layer that will add read-ahead or write buffering to any
MTD driver (incomplete).
- Automounter: Add support for an auto-mounter that will automatically
mount and unmount a file system a media is inserted and removed
* Audio/Audio Drivers
- WM8904 audio CODEC driver.
- PCM .WAV file decoder. Fast forward implemented with sub-sampling
(currently no rewind support).
- Add a NULL audio device that can be used to simply unit-level testing
of audio decoders.
- Audio subsystem now supports interfaces for fast-forward and rewind
needed by CMediaPlayer; add hooks for equalizer settings needed by
the WM8904 CODEC.
* Other Common Drivers:
- MTD: Extend erase block size to 18-bits in order (decrease block
size to 14-bits) to handle parts with large erase blocks. From Kosma
Moczek
- maxTouch: Add support for the Atmel maXTouch touchscreen controller.
* Host Simulation:
- Provides the timers needed to support the Tickless mode of operation.
* Atmel SAM4C:
- Add SAM4CM IPC register header file. From Max Neklyudov
- Various fixes PMC and clock configuration for the SAM4CM port from
Max Neklyudov
* Atmel SAM4E/4S Drivers:
- SAM4 AES driver. Contributed by Max Neklyudov
* Atmel SAMA5:
- Add logic to redirect all SAMA5D4 interrupts to the AIC
- Add a configuration option to reserve DRAM for a framebuffer when
executing out of DRAM. This optional was available before when
executing out of NOR, but needs to work a little differently in
this case.
- Add SAMA5 slow (32.768KHz) clock support.
- Add support for the ARM L2CC-PL310 L2 cache. The system runs with
L2CC cache enabled but there is some issues still with the LCD DMA;
I suspect that the memory timing configuration for L2CC needs to
be tuned.
- Provides the timers needed to support the Tickless mode of operation.
* Atmel SAMA5 Drivers:
- XDMAC-based HSCMI driver for the SAMA5D4
- Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has
no hardware cursor.
- PIO: Add a new interface sam_pio_forceclk() that can be used to
force PIO clocking on. I am afraid I was too conservative with
PIO clocking in the initial design; this is the price.
- TWI: Now supports the up_i2creset() method.
- TWI: Use sam_pio_forceclk() so that we can read the current state
of an open-drain output in the TWI reset logic.
- SSC: SCC Frame Synch Delay and Start Delay are now configurable.
- PCK: Add the slow clock and the main clocks as options for the
PCK configuration.
- Timer/Counter: Can now handle non-constant BOARD_MCK_FREQUENCY. Also
now supports methods to attach client interrupt handlers
- One shot and free-running timers. These are wrappers around the low
level timer/counter logic to provide one-shot and free-running
timers. These were developed to support the Tickless operation, but
can be used for any purpose.
* Atmel SAMA5 Board Support:
- Add a boot loader that runs from ISRAM and loads an Intel HEX file
into DRAM.
- Add a configuration that will load a bootloader into AT25 Serial
FLASH
- SAMA5D4-EK NSH configuration supports many more features: RTC, HSCMI
card detection, maXTouch touchscreen, TM7000 LCD, the command line
media player (currently using the NULL audio device), automounter,
and others.
- SAMA5D4-EK: Add an NxWM configuration using the TM7000 LCD with
the maXTouch multi-touch touchscreen.
- SAMA5D4-EK NxWM: Uses new, larger icons in configuration instead of
scaling.
- SAMA5D4-EK NxWM: The NxPlayer and audio system are now enabled in
the default configuration (but currently using the NULL audio
device). The automounter is used to automatically mount media
on an SD card.
- SAMA5D3x-EK: Add a configuration to support the command line
NxPlayer and to verify the WM8904 CODEC driver.
* STMicro STM32:
- Add support for the STM32F103RC and RD. From Kosma Moczek
- Add a procfs entry to show the state of the CCM heap usage.
From Pelle Winderstam
* STMicro STM32 Drivers:
- Unconfigure GPIO pins when closing a serial port to prevent back
effects from back-powering on the TX pin. From Kosma Moczek
* NXP LPC17xx Drivers:
- ADC: Added burstmode ADC conversion mode, with CONFIG_ADC_BURSTMODE
option in Kconfig. From Max
- Ethernet: Added option to use the kernel worker thread to do most of
the workload with CONFIG_NET_WORKER_THREAD option in Kconfig. From Max
- Ethernet: Critical bugfix: From time to time (after some hours) the
Ethernet receiver would lose one receive interrupt and the IP stack
never recover because there is no receive watchdog as the transmit
watchdog. From Max
* NXP LPC17xx Boards:
- mbed: Port ADC, DAC, and PWM logic from the configs/zkit-arm-1769.
From Max
- mbed: Eliminated a problem with PHY DP83848C : it doesn't need a
specific initialization on mbed. From Max
* Library:
- Adds support for localtime. From Max Neklyudov
* Configuration/Build System:
- Make variable definitions 'static const' when possible to save RAM
usage. From Kosma Moczek
* Applications:
- sysem/mdio: New PHY tool from Daniel Lazlo Sizter.
- NSH: Networking logic modified to handler the case of SLIP
transport. From Max Neklyudov.
- NSH: Add a configuration to use a USB keyboard for the stdin
device.
- NSH: Software assigned MAC address is now configurable. From Lazlo.
- NSH: Also add an option to let platform-specific logic select the
MAC address.
- NSH: There is now a configuration option that will bring up the
network on an separate thread. Since the network bring-up is
asynchronous, there are no serial console start-up delays due
to the network negotiation time.
- NxPlayer: Changes to integrate with Ken's NxWM::CMediaPlayer.
- NxPlayer: Add interfaces for fast-forward and rewind needed by
CMediaPlayer; add interface for equalizer settings needed by the
WM8904.
- NxPlayer: Supports new way of identifying the end of the audio
stream (see the Audio section above).
- Sudoku: Add a sudoku game.
Bugfixes. Only the most critical bugfixes are listed here (see the ChangeLog for the complete list of bugfixes and for additional, more detailed bugfix information):
* Graphics:
- NxConsole: Fix scrolling for the case of the framebuffer device. In
this case, the logic for clearing the vacated region at the bottom
was missing so garbage would scroll up from the last, uncleared
line.
* Networking:
- Important fix to the read-ahead buffer queue management: Consumed
bytes were being trimmed from the head of the queue, but the queue
head itself was not being updated. From Rony XLN.
- Fix an error in SLIP escaping. From Max Neklyudov
* Network Utilities:
- Fix an include file ordering problem when CONFIG_NET_STATISTICS=y.
- Move statistics from uip.h to new netstats.h to remove a circular
inclusion problem
- Various fixes for networking and tiny webserver from Max
- webclient: Fix to offset calculation from Rony Xln. Prevents 0x0a
at the beginning of lines.
- webserver: Fix some configuration usage issues. From Max.
- webserver: Missing logic to close sockets on loop termination.
* File System / Block Drivers:
- SmartFS: Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE
was not selected and the SMART sector size was larger than the MTD
device's block size (like it would be if using SMARTFS on larger
flash devices). From Ken Pettit.
* Audio:
- Change how the end of the audio stream is detected by the leaf audio
component. This used to be done by looking for the first partial
buffer. That does not work with the in-place sub-sampling performed
by the PCM decoder: That always reduces the size of the buffer so
that all buffers only partially filled by the time they get to the
leaf. Now, a flag is set in the audio buffer flags set to indicate
the final buffer in the stream.
* Common Drivers:
- RAMLOG putc() method needs to set the errno and return EOF on a
failure.
- Add missing configuration option to select the MAX11802 touchscreen
controller. From Petteri Aimonen
* Atmel SAMA5D3/4:
- Fix logic in conversion of physical and virtual DRAM addresses when
running out of DRAM. This is an important bug fix for the SAMA5D3
and 4 when running out of DRAM .
- Critical SAMA5D3 and 4 bug fix: PIO clocking must be enabled for
all input pins or else the value that is read never changes.
* Atmel SAMA5D3/4 Drivers:
- OHCI: Fix an error in a DEBUGASSERT statement. Caused an
assertion to fire inappropriately when a low- or full-speed device
was removed and CONFIG_DEBUG=y
- OHCI: Pointers to allocated port values were not being
nullified after being deallocated. This caused some assertions
to fire when debug was enabled
- SSC: Needs to account for data offset in audio buffer
* ARMv7-M:
- Correct the initial value of the BASEPRI register. This was
apparently never being initialized! From Max
* STMicro STM32 Drivers:
- I2C: Fix missing configuration of GPIO pins in I2C driver. Fix
from Alex D.
- STM32 OTGFS device: Various changes to try to reduce that amount of
time in interrupts handles and with interrupts disabled. From
Petteri Aimonen
* Atmel SAM3/4 Drivers:
- Ethernet: Wrong bits being cleared before OR-ing in new settings.
- Ethernet: Fix an error in the function that determines the number
of free TX descriptors. This is an important bugfix on busy
networks.
- I2C: Test for read or write operation was reversed. How could
this have worked before?
* Atmel SAM3/4 Boards:
- SAM4S Xplained-Pro: Correct description of LEDs and usage. From
Kosma Moczek
* Atmel SAMA5:
- PIO: Fix definitions that could disable PIO interrupt support if only
PIOE interrupts were enabled
- PIO: Macro SAM_PION_VBASE is not define-able for the SAMA5D4 and must
be replaced with a table lookup.
- PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a
vanilla input first so that final pin configuration is more read-able
(i.e., easier to debug)
- PIO: Logic for Schmitt trigger selection backward
- SAMA5D4: Correct system timer frequency. Input clock is MCK/2, not MCK.
* Atmel SAMA5 Drivers:
- Ethernet: Wrong bits being cleared before OR-ing in new settings.
- Ethernet: Fix an error in the function that determines the number
of free TX descriptors. This is an important bugfix on busy
networks.
- HSMCI: The 8-byte SCR transfer was failing silently with the DMA
transfer, leaving the SD card in single bit mode. Fixed by adding
a non-DMA read transfer mode.
- HSMCI: Fix a problem on card insertion/removal callback handling.
Interrupts were being disable so that the callbacks occurred with
interrupts disabled. This resulted in loss of some interrupts and
some not-so-good behaviors. The solution is to perform all
callbacks on the work thread unconditionally
* Atmel SAMA5 Boards:
- PIO: Fix some cloned errors in SAM GPIO interrupt setup
* NXP LPC17xx Drivers:
- Ethernet: Comment out an assertion that is reported to fire
inappropriately. From Max
* Library:
- stdint.h: Correct naming of [U]INT_LEASTn_{MAX|MIN} and
[U]INT_FASTn{MAX|MIN}. From Kosma Moczek
- unistd.h: POSIX definitions should be defined to a value. rom Kosma
Moczek
- Fixes associated with rint() and related interfaces in the math
library.
* Configuration/Build System:
- NAME_MAX not available on SunOS; use FILENAME_MAX or MAXNAMELEN.
Noted by Douglas Beattie
* Applications:
- NSH: if # appears on line, need to comment ignore additional
commands on the line
- NxPlayer: Check for file read errors and end-of-file with zero
bytes read. Other error handling corrected as well.
- NxPlayer: NxPlayer needs to set curbyte field to zero before
enqueuing a buffer. Otherwise, it looks like beginning of the
buffer has already been consumed.
NuttX-7.5
---------
The 105th release of NuttX, Version 7.5, was made on September 28, 2014,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.5.tar.gz and
apps-7.5.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS:
- Watchdog Timer Allocation: (1) If we run out of pre-allocated
watchdog times, the logic will now allocate additional timers
from the heap. A reserve of pre-allocated watchdog timers is
maintained so that there will always be timers available for
interrupt handlers. (2) Added support for statically allocated
watchdog timer
- Address Environment Support: (2) New OS APIs integrated into all
platform-specific context switching logic (up_block_task(),
up_unblock_task(), _exit(), and others).
- Kernel Build Support: (1) The MPU based "kernel build" renamed to a
protected build (CONFIG_BUILD_PROTECTED); added support for the a
new MMU-based "kernel build" (CONFIG_BUILD_KERNEL), (2) The system
call library can now be built with CONFIG_NUTTX_KERNEL. New
selection: CONFIG_LIB_SYSCALL.
- System Startup: Add configuration options to start the system from
a program on a file system (versus an address in memory).
- Startup Parameter Passing. There used to be two ways to pass
parameters to new tasks, depending upon the configuration: Either
(1) argv[] as created as an array with each string strdup'ed. Or
(2) argv[] array and strings were created on the stack before the
new task was started. Now, there is only one way, way (1). Way
(2) might be slightly more compact, but this is not worth carry the
complexity of two different ways of doing the same thing.
- Board Initialization: Add capability to perform initial board
initialization on a separate worker thread. This is needed because
there are many cases where initialization logic cannot execute on
the start-up/IDLE thread. That is because blocking or waiting is
not permitted on the IDLE thread.
* Memory Management:
- Granule Allocator: (1) Add a new function to reserve un-allocatable
regions in the granule heap. (2) Add interfaces to support
un-initializing a granule allocator.
- Page Allocator: Add a simple physical page allocator based on the
existing NuttX granule allocator. I am not certain if the granule
allocator is sufficiently deterministic for long range use, but it
gets get a page allocator in place for testing very quickly.
- Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer
supported.
- sbrk(): sbrk() is now supported in the kernel build to permit
dynamically sized, per-process heaps.
- Per-Process Heaps: Space at the beginning of the process data space
is now reserved for user heap management structures. In the kernel
build mode, these heap structures are shared between the kernel and
use code in order to allocate user-specific data.
- User Heap Management: When a privileged thread exits, we have to
use the kernel allocator to free memory; when an unprivileged thread
exits, we don't have to do anything... heap memory will be cleaned
up when the address environment is torn down.
- Inter-Process Shared Memory Support: (1) Add implementation and
documentation for shmget(), shmctl(), shmat(), and shmdt(). (2)
Add system system calls to support the user call gate to the shared
memory interfaces. (3) Add platform-specific interface definitions
needed to support the shared memory feature.
- Virtual Page Allocator: Add support for a per-process virtual page
allocator. This is a new member of the task_group_s structure. The
allocator must be initialized when a new user process is started and
uninitialize when the process group is finally destroyed. It is
used by shmat() and shmdt() to pick the virtual address onto which
to map the shared physical memory.
* File Systems/Block Drivers/MTD:
- SMART FS and SMART FS procfs updates from Ken Pettit.
- The MTD Read-ahead/Write buffer layer appears is now functional.
* Binary Formats:
- Add logic to initialize the per-process user heap when each user
process is started.
* Graphics:
- Change all occurrences of NxConsole to NxTerm.
* Networking:
- PHY Interrupts: (1) Standardize a PHY interrupt attachment
interface. (2) Add support for an ioctl that can be used to notify
an application when there is a change in the network status
signalled by a PHY interrupt.
- Improved Send Logic: In the past, the first packet send to a new
network peer would fail; there would be no entry in the ARP table
for the peer and so an ARP request could replace that first packet.
Now as an option if CONFIG_NET_ARP_SEND=y, all send logic will (1)
check if the peer MAC address is in the ARP table and, if not, (2)
send ARP requests periodically to get the mapping and (3) wait for
the ARP response. Then (4) when the ARP response is received then
the actual send logic will be initiated. Thus there may be a delay
with the first packet sent to a new peer, but the packet should not
be lost
* Host Simulation:
- Emulated SPI FLASH driver for the sim target from Ken Pettit.
* Intel x86:
- The default host is now x86_64 and the -m32 option will be
automatically selected for simulation builds.
* Intel 8051 Family:
- Removed all support for the 8051 family architecture from the NuttX
source tree. The obsoleted code along with the removal patch can
now be found at misc/Obsoleted/. This code was removed because (1)
although some functionality has been demonstrated, I am not aware of
any really successful ports of NuttX to any 8051, and (2) the 8051,
with its hardware stack, forces limitations and complications to the
other architectures and make growth and development of NuttX more
complex.
* ZiLOG ZNeo Boards:
- configs/16z: Support for this board has been removed from the NuttX
source tree (but still can be found in the misc/Obsoleted
directory). This port is not ready for usage but may return to the
NuttX tree at some point in the future.
* Atmel SAM3/4 Boards:
- SAM4E-EK: Add (1) a fully-functional ILI9341-based LCD driver and
(2) a fully-functional NxWM configuration.
* ARMv7-A:
- Address Environments: Add support for application address
environments using the Cortex-A MMU. Implement standardized
platform-specific interfaces of NuttX address environment
support.
- Cache Operations: Implement standardized, platform-specific cache
operations. These are called from the ELF loader in order to flush
D-cache and invalidate I-cache after an ELF module has been loaded
into memory. With this change, ELF modules work correctly on the
SAMA5/Cortex-A platform.
- Kernel Build: (1) Add implementations of system call gate. (2) Add
CRT0 start-up file that can be linked with separately built user
programs. (3) Add support for delivery of use-mode signals in the
kernel build. (4) Add logic to initialize the per-process user heap
when each user process is started. (5) ARMv7-A exception handling
needs to work a little differently if we support user mode
processes. This is because R13 and R14 are paged differently
between user and SVC mode.
- Shared Memory Support: (1) Add logic necessary to handle remapping
of shared memory on context switches. (2) Extend virtual/physical
address conversions to include addresses in shared memory. (3) Add
implementation of platform-specific shared memory support.
* Atmel SAMA5D Drivers:
- Implement all network ioctls, including the new ioctl to setup PHY
event notifications.
- In kernel build with address environment, need logic to map user
virtual addresses to physical addresses, and vice versa.
* Atmel SAMA5D Boards:
- SAMA5D3 Xplained, SAMA5D3-EK, and SAMA5D4-EK: Convert existing
board specific PHY interrupt interfaces to use newly defined
standard interface.
- SAMA5D4-EK: Add a configuration for testing the kernel build
configuration. There are configurations to boot either from an SD
card or from and in-memory ROMFS file system.
- SAMA5D4-EK: Add documentation/support for Rev E. board.
* STMicro STM32 Drivers:
- Ethernet: Modified to support the change to the network ioctl
signature changes. Also add support for new ioctl to setup PHY
event notifications.
* STMicro STM32 Boards:
- STM32F4Discovery with STM32F4DIS-BB: Add a network enabled NSH
configuration for the STM32F4Discovery board with the STM32F4DIS-BB
base board installed. Includes support for the microSD card slot on
the STM32F4DIS-BB base board.
* TI Tiva Drivers:
- Add support for the TI CC3200. From Jim Ewing.
* TI Tiva Boards:
- Add support for the TI CC3200 Launchpad. From Jim Ewing.
* C Library:
- Re-implemented poll() delay using sem_timedwait().
* Configuration/Build System:
- Export Target: In the kernel or protected builds, (1) only the user
libraries should be exported, (2) do not copy internal header files
or build scripts if this is a kernel or protected build, and (3)
needs to bundle up the user C startup file (crt0), not the kernel
head object for the kernel and protected builds.
- Add logic that will permit us to build user libraries with different
CFLAGS than kernel code. This is needed because we need the
-fno-common option when building ELF code to prevent SHN_COMMON
relocations.
* Applications:
- NSH: Extend the NSH network initialization logic. There is now an
option that will create a network monitor thread that will monitor
the state of the link. When the link goes down, the code will
attempt to gracefully put the Ethernet driver in a down state; When
the link comes back, the code will attempt to bring the network back
up.
- ELF Example: The ELF test/example has been extended so the
individual ELF test programs can link against the SYSCALL library
(if it is available) or against the C library to eliminate or
minimize the need for symbol tables.
- Change all occurrences of NxConsole to NxTerm.
- MTDRWB Example: Add an example to test MTD R/W buffering.
- OS Test Example: Add a trivial test of sem_timedwait.
* Application Configuration/Build System:
- Import Target: (1) Add logic that will allow building applications
against a NuttX export package (vs. the nuttx/ source tree). (2)
Add .config file to export package. (3) Create apps/import. Create
apps/import/Make.defs that does things like define CFLAGS; ELF build
requires -fno-common in CFLAGS. Copy some base logic from
nuttx/tools/Config.mk to apps/import/Make.defs. (4) Add
apps/import/scripts/gnu-elf.ld GCC linker script for ELF import
builds.
- All Makefiles: (1) Add an install target to all makefiles. For
the import build, the top-level Makefile now does two passes: (1)
builds libapp.a, then (2) installs the programs into apps/bin. (2)
Add program installation for CONFIG_BUILD_KERNEL in all Makefiles
that build a main(). (3) For kernel build, the object file
containing main cannot go into library because of name collisions.
The object file must be handled as a special case in every Makefile.
- All Built-In Programs: With kernel build (CONFIG_BUILD_KERNEL),
entry point to all tasks is main(), not some xyz_main().
- NSH: Several commands must be disabled in the kernel build because
they depend on interfaces that are not available outside of the
kernel: dd, df, losetup, mkfatfs, mkdr, and ps.
- apps/tools/: (1) Add mkimport.sh to expload an NuttX import package
and install in apps/import. (2) Add mkromfsimg.sh script to create
a BOOT ROMFS filesystem image.
- ELF and NxFLAT Examples: Do not build test cases that use
task_create() if there is an address environment.
* Tools:
- refresh.sh: Add a tool to make refreshing configurations easier
when you want to do a lot of them.
- mksyscall.c: Build syscalls that do not need header files.
- mkexport.sh: Add .config file to export package.
- See above for new apps/tools scripts.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* Processes. Much of the work in this release is focused on the
realization of Unix-style user processes in NuttX. There is more to
be done, however. The full roadmap and status is available at:
http://www.nuttx.org/doku.php?id=wiki:nxinternal:memconfigs#the_roadmap_toward_processes
* XMega: There are some fragments in place for an XMega port. That
port has not really started, however.
* Galileo: Similarly, there are fragments in place for an Intel Galileo
port. The port not been started in earnest either.
Bugfixes. Only the most critical bugfixes are listed here (see the ChangeLog for the complete list of bugfixes and for additional, more detailed bugfix information):
* Core OS:
- Kernel build fixes: (1) IDLE TCB setup needs to indicate that the
IDLE thread is a privileged, kernel thread. (2) Don't build
task_create() or task_spawn() interfaces if there is an address
environment. (3) posix_spawn() kernel proxy thread should be a
kernel thread, not a user task.
- Several pthread interfaces: Add const storage class to phthread
parameters. From Freddie Chopin.
- sched/clock: Remove vestiges of g_tickbias; need, instead, to apply
time bias to g_basetime in order to provide the correct system time.
- System Calls: (1) Several typos fixed; corrected integration of
exevc(), execvl(), posix_spawn, and posix_spawnp system calls. (2)
If we are configured to use a kernel stack while in SYSCALL handling,
then we need to switch back to the user stack to deliver a signal.
* File Systems/Block Drivers/MTD:
- procfs: Fix some procfs breakage introduced by reorganizing some
non-reorganizable data structures. From Ken Pettit.
- AT45: In at45db_bwrite , the buffer is not increased when writing
more than 1 page. Sourceforge bug #34.
* Binary Formats:
- ELF relocations. Some relocation types do not have a named symbol
associated with them. The design did not account for that case.
- ELF Loader: Critical bugfix.. BSS was not being cleared.
* Memory Management:
- Granule allocator initialization uses wrong allocator to setting
aside kernel memory.
- Add a flag to group structure: If the group is created by a kernel
thread, then all resources in the group must be privileged.
* Cryptogrphic Support:
- crypto/cryptodev.c: Path segments reversed in include file path. Noted by Brennan Ashton.
* Common Drivers:
- Common CAN upper-half: In can_txdone, waiters on the semaphore
should be informed regardless of the return value of can_xmit. First
it returns -EIO if there are no new packets, and second the
information of the waiters is about the last transferred packet.
From Daniel Lazlo Sitzer.
* ARM:
- System Calls: Fix a typo in system call when fetching parameter from
the stack: regs[REG_PC]+4 is the address, not regs[REG_PC+4].
* STMicro STM32 Drivers:
- STM32 F401 UART: Correct support for USART6 on this chip. From
Freddie Chopin.
- STM32 FLASH fixes: use size_t instead of uint16_t, make interface
more generic. From Freddie Chopin.
- Fix for UART7 and UART8 on STM32 clock enable from Aton.
- CAN: At the end of the interrupt handler, the interrupts were being
disabled, if all packets have been transferred when the interrupt
handler was invoked. This is problematic, because the interrupt
handler calls can_txdone of the upper half which can enqueue new
packets to send. Removed the block altogether, because can_txdone
calls can_xmit which disables interrupts if there are no new packets
to send. From Daniel Lazlo Sitzer.
- Additional STM32 CAN correction suggested by Max Holtzberg.
* STMicro ST32 Boards:
- configs/mikroe-stm32f4: Fix a few compile bugs and minor corrections
to the mikroe-stm32f4 configuration source. From Ken Pettit.
* ARM9/ARMv7-A:
- System Calls: Fix ARM7/9 and Cortex-A SYSCALLs: For threads in SVC
mode, the SVC instructions clobbers R14. This must be taken account
in the inline assembly.
- Task Setup: All tasks, even user mode tasks, must start in
supervisor mode until they get past the start-up trampoline.
- ARMv7-A: Modify up_fullcontextrestore() for CONFIG_BUILD_KERNEL.
It changed CPSR while in kernel. That will crash if the new CPSR is
user mode while executing in kernel space. Fixed by adding a
SYS_context_restore system call. There is an alternative, simpler
modification to up_fullcontextrestore() that could have been done:
It might have been possible to use the SPSR instead of the CPRSR and
then do an exception return from up_fullcontextrestore(). That
would be more efficient, but I never tried it.
* Atmel SAM3/4 Boards:
- SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK
definitions to board.h header file. From Fabien Comte.
- SAM3 RTT: Only SAM4 family has RTTDIS bit in the MR register.
SourceForge bug #33 from Fabien Comte.
* C Library:
- sscanf(): NuttX libc tried to guess how many characters to parse,
extracted them into a buffer, then ran strtol() on that buffer.
That guess was often wrong. A better approach would be to call
strtol() directly on the input data, using the endptr return value
to determine how many characters to skip after parsing. From Kosma
Moczek.
- Corrected atan2 implementations from Denis Arnst.
- Change to lib_dtoa() to fix precision error from trailing zeroes.
From Bob Doiron.
* Applications:
- Fix NSH PS command: If there are no arguments, it could print
garbage for argument list.
* Configuration/Build System:
- Null Example: Need to include config.h it order know if this is or
is not a kernel build. This problem still exists in several other
file that may need to define main().
NuttX-7.6
---------
The 106th release of NuttX, Version 7.6, was made on November 26, 2014,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.6.tar.gz and
apps-7.6.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS:
- Moved name semaphore and message queue support out of the OS and
into the VFS. These improves the architecture by unifying the
management of named resources, removes redundant resource management
logic, and makes named semaphores and message queues visible in the
file system. By default, these are visible at /var/lock and
/var/mqueue.
- Add SIGPOLL for use as part of the AIO implementation.
- Remove CONFIG_MAX_TASK_ARGS configuration. There is now no
predetermined limit on the number of arguments that may be passed
to a new task on start-up.
* Work queues:
- Add support for priority inheritance on the low priority worker
queue. That is, if a higher priority thread has scheduled work, the
priority of the low priority worker thread(s) will be boost to the
priority of the queuing thread. At work is performed at at least
thread priority of the scheduling thread. If there are multiple
worker threads, then all threads get reprioritized. Currently
only implemented for AIO.
- Add support for multiple low-priority work queue threads. This
allows individual worker threads to block indefinitely for I/O as
necessary without halting the entire work queue.
* VFS/General Drivers:
- Implement create() (as a macro).
- Add pread() and pwrite(). Also added pread() and pwrite()
system calls.
- AIO: Add aio_read(), aio_write(), aio_return(), aio_error(),
aio_suspend(), aio_canel(), lio_listio(), and aio_fsync(). This
logic minimizes the creation of new threads by using the new
features also added to the low priority work queue with this
release. It uses the new low priority worker thread interface
to adjust the priority of the worker thread according to the
priority of the AIO client thread
- Implement standard syslogmask() to control logging (also removing
the non-standard syslog_enable()).
* File Systems/Block Drivers/MTD:
- Extend MTD support to the M25P16. From S<>bastien Lorquet.
* Drivers:
- BCH (Block-to-Character): Add support for seeking in BCH. From
S<>bastien Lorquet.
* Graphics Support/Graphics-Related Drivers:
- Add support for a generic ILI9341 LCD driver. From Marco Krahl.
- Add ANSI/VT100 foreground and background color commands.
- Add driver for ST7565 LCD that works with NHD-C12864KGZ display. From Pierre-noel Bouteville.
* Networking:
- Verify that multiple networks can be supported.
- Add support for the case where there are multiple networks: One
being Ethernet and the other not (SLIP, PPP, ...). The primary
difference from the standpoint of the stack is that (1) ARP may or
may not be necessary, (2) the size of the link layer header will
vary, and (3) different MTUs and TCP receive windows may be used
with each link. Suggested by Brennan Ashton.
- Extensions to UDP and TCP connection structures for the case of
multiple networks. In this case, assigned port numbers only have to
be unique with respect to the IP address. So, for example, you
could have multiple port 80's, one on each network.
* Host Simulation:
- Removed the old, strange up_stdio.c and implemented a simulated UART
driver to provide the console input. The new logic starts a
separate, Linux domain pthread to read the console input in raw mode
and provides the incoming data to NuttX via standard NuttX domain
IPCs.
- Add support for 64-bit longjmp/setjmp in simulator platform. This
will permit operation of the simulation natively on a 64-bit
platform.
* ARMv7-M:
- Add ARMv7-M CMSIS ITM header file and library. From Pierre-noel
Bouteville.
- Add ARMv7-M CMSIS DWT and TPI header files. From Pierre-noel
Bouteville.
- Add ARMv7-M support to use ITM for SYSLOG debug output. Includes
logic from Pierre-noel Bouteville.
* Atmel SAM3/4 Drivers:
- Add support for SAM3/4 basic serial TERMIOS and flow control.
There are issues with IFLOW control: PDC or DMAC support is
required.
* Atmel SAM3/4 Boards:
- SAM4E-EK: Add support for PHY interrupt.
* Atmel SAMA5D Boards:
- SAMA5D3-Xplained: Add a configuration that provides a simple test
for the EMAC and GMAC on the SAMA5D3 working together.
- SAMA5D4-EK: Add a configuration that provides a simple test for the
EMAC0 and EMAC1 on the SAMA5D4 working together.
* Freescale KL:
- Add an I2C header file for the Freescale KL family. From Alan
Carvalho de Assis.
* NXP LPC32xx:
- Add support for tickless operation using the NXP LPC43xx. From
Brandon Warhurst.
* SiLabs EFM32:
- Add a basic port for the SiLabs EFM32 family. Includes many files
contributed by Pierre-noel Bouteville .
* SiLabs EFM32 Boards:
- Add board support for the EFM32 Gecko Starter Kit.
- Add board support for the Olimex EFM32G8809128 STK. NOTE: I am
unable to test this configuration due to tool-related issues.
- Add board support for the SiLbas EFM32GG Giant Gecko Starter kit.
* STMicro STM32:
- Add support for the STM32 F411RE from Serg Podtynnyi.
- Add support for the STM32F103RG. From Murilo Ponte.
* STMicro STM32 Drivers:
- STM32 F4: Add logic that implement true high speed support for the
STM32 OTGHS peripheral and concurrent support for both LS and HS
OTG. New OTGHS drivers provided for both device and host. From
Brennan Ashton.
* STMicro STM32 Boards:
- STM32 Nucleo-F411RE: Extend this board configuration to also support
the Nucleo-F411RE. From Serg Podtynnyi.
- Add support for the STM32F429i Discovery's LCD (SPI based). From
Marco Krahl.
- configs/stm32f100rc_generic: Removed this generic board configuration.
I have decided to stop support of generic board configurations. Generic
board configurations do not provide support for any specific hardware
but can be useful only if there are not other examples for the setup
for a particular architecture. Not the case here.
* C Library:
- Add a mostly bogus wchar.h header file. This file is mostly bogus
because none of the wide character operations are currently
supported in the Nuttx C library. The file does provide the wchar_t
types needed by some software, however.
- Add isatty() function. From Alan Carvalho de Assis.
- Add mktemp(), mkstemp(), tmpnam() and tempnam().
* Configuration/Build System:
- Add a PRELINK macro to Config.mk. From Kriegleder.
- compiler.h: Defines inline functions as not instrumented - this is
relevant for anyone using instrumentation. From Lorenz Meier.
* Applications:
- apps/interpreter/bas: Added in the Michael Haardt's BAS 2.4 adapted
for use by NuttX by Alan Carvalho de Assis. Includes support for
VT100 terminals and color commands.
- Examples: Added bastest/ which holds a special version of Michael
Haardt's BAS 2.4 test files adapted for use by NuttX on a ROMFS file
system.
- Examples: Add a simple UDP relay bridge for testing configurations
with multiple networks. Includes a host-side test driver for
testing the bridge.
- Netutils: Add implementation of timeouts for the netutils webclient.
From Brennan Ashton
- NSH: Add support for a custom NSH ROMFS startup image header file
location. From Martin Lederhilger.
- OS test: Add a simple test of named semaphores.
- OS test: Add AIO test case in OS test.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* Processes. Much of the work in this release is focused on the
realization of Unix-style user processes in NuttX. There is more to
be done, however. The full roadmap and status is available at:
http://www.nuttx.org/doku.php?id=wiki:nxinternal:memconfigs#the_roadmap_toward_processes
* XMega: There are some fragments in place for an XMega port. That
port has not really started, however.
* Galileo: Similarly, there are fragments in place for an Intel Galileo
port. The port not been started in earnest either.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
I ran cppcheck against the entire code base and correct many latent bugs
including things as serious as memory leaks, two locations where interrupts
were be disabled but never re-enabled, and errors in the Tickless mode of
operation. My thanks to the developers of cppcheck! I am impressed!
* Core OS:
- vfork(): Now that arguments are kept on the stack, the way that
arguments are passed from parent to child in vfork() must change.
This bug has always been present, but was not visible with the
old strdup() way of passing arguments.
- vfork() problem: If we get to vfork() via system call, then we
need to clone some system call information so that the return form
the cloned system call works correctly.
- Fixes to tickless operation code, especially in alarm mode. From
Brandon Warhurst.
- Fix an important bug in the watchdog timer creation logic.
- Calling mq_timedreceived() with immediate timeout was getting stuck
and not timing out. Immediate timeout is achieved by setting absolute
timeout value to past time, for example abstime={ .tv_sec=0,
.tv_nsec=0 }. However absolute time was converted to relative time
using unsigned integer arithmetic and resulted large ticks count by
clock_abstime2ticks, instead of expected negative ticks value.
Change corrects clock_abstime2ticks() to return negative ticks, if
absolute time is in the past. From Jussi Kivilinna.
* Memory Management:
- Fix a place in the memory manager where it explicitly assumed that
the size of a pointer is 4 bytes. That assumption was OK if the
actual size is smaller but made the heap unstable when used with
the x86_64 host simulation.
- Granule Allocator: If the INTR granule allocator mode is enabled,
there is no semaphore to destroy. From Lorenz Meier.
* Networking:
- Network routing: I don't think that the net_route() function has
ever worked correctly. The source IP was updated in the match
struct instead of the route IP. From Brennan Ashton.
- Move and rename IP header flag definitions. The problem fixed here
is that there IP header flag definitions were not available when TCP
was disabled. The IP flags are used in ICMP and IGMP.
- Network routing: Refuse to perform routing table lookups for the
Broadcast IP address. From Brennan Ashton.
- Network routing: Add logic to netdev_findbyaddr() to return the
correct network device for the case where a broadcast
address is used. This change caused trivial ripples through other
files because additional parameters are required for
netdev_findbyaddr() when CONFIG_NET_MULTINIC.
* File Systems/Block Drivers/MTD:
- NXFFS Dump: Fix problems with redefinitions of fdbg macro. With the
fix to the syslog prototype, a LOG priority must now be the first
parameter. Fixed by replacing all occurrences of fdbg with
syslog(LOG_DEBUG, and eliminating the macro redefinitions. Noted
by Sebastien Lorquet.
- poll() was not waking up from signals (for example mq_notify()
events). From Jussi Kivilinna.
- poll(): Add proper handling for sem_timedwait errnos. From Jussi
Kivilinna.
- include/nuttx/fs/fs.h: Fix typo in conditional compilation. From
Alan Carvalho de Assis.
* Graphics/Graphic-Related Drivers:
- Remove warnings when CONFIG_NXTK_BORDERWIDTH is set to zero. From
Pierre-Noel Bouteville.
* Common Drivers:
- Make standard syslog and vsyslog POSIX compliant (also modify
non-standard syslog functions for compatibility).
- R/W buffering: Fix typo that can cause compilation error.
* Atmel SAM3/4:
- SAM4S: Add missing SPI0 clock configuration macro for the SAM4S. From spasbyspas.
* Atmel SAM3/4 Drivers:
- SAM4E-EK: Fix an error in a USART1 pin number.
* Atmel SAMA5D3/4 Drivers:
- SAMA5DF4: Fix several typos that will prevented EMAC1 from
initializing properly.
* NXP LPC43xx:
- Fixes to allow compile of lpc43_gpioint.c. From Brandon Warhurst.
* STMicro STM32:
- Add missing ADC pinmap definitions for the STM32 F103R from Martin
Lederhilger.
* STMicro STM32 Drivers:
- STM32 EXTI: Correct STM32 RTC EXTI bit definition. From Lazlo.
- STM32 IWDG, WWDG, DBGMCU: Fix watchdog stop bit usage. From Lazlo.
- STM32 OTGFS: Correct a typo in the STM32 OTGFS register bit definitions.
* ARM:
- ARM up_internal.h: Add protection from C++ name mangling in the
ARM up_internal.h. From Lorenz Meier.
* MicroChip PIC32MX:
- PIC32MX7: DEVCFG0 bit 2 must be set. Writing bit 2 as zero can
brick the CPU on some versions. From Cris Kvist.
* C Library:
- The implementation of access() as vararg macro has the issue that
any function call with the same name (even in a C++ class) will
match with it and result in a compile error. Replaced with a small
function. This resolves the compile issue, and shouldn<64>t have
negative side effects for users of the function. From Lorenz Meier.
- The definition of strncpy() is that empty space should be zero-
filled, the change adds the zero filling (See the POSIX spec here:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/strncpy.html). From
Lorenz Meier.
- limits.h: Remove the definition of INT_FAST32_MIN which is already
defined in stdint.h (the correct location). From Lorenz Meier.
* Applications:
- apps/: Correct everything under apps to use the corrected syslog
interfaces. Remove any non-portable uses of syslog.
- NSH: Fix ls -l output for regular files.
- NSH: Fix reversed in/out file closing in DD command when an error
occurs. From Ken Pettit.
- NSH: Add logic to restart the console wait if an error occurs
while reading from the console. In USB console startup, the logic
must be able to open the USB serial and receive 3 newlines.
However, it the USB driver is disconnected or otherwise fails before
the 3 newlines are received, the receive loop becomes a killer,
infinite loop, CPU hog. Noted by spasbyspas.
- Netutils: Fix memcpy of host address in netlib_gethostaddr(). From
Brennan Ashton.
- Netutils: If you make a DNS request before the DNS address it would
cause an assertion. The state of the IP setting is not something the
application should be aware of, it should only be concerned with
whether or not the name was resolved. From Brennan Ashton.
- Netutils: Fix md5 hashing when digest[$i] islower that 16. From
Sergey.
- Stack Monitor: Fix compile problems introduced when the syslog()
prototype changed; Also update Makefile for kernel build From
Radoslaw Adamczyk.
- Examples: Update NxTerm makefile for kernel-build issues. From
Radoslaw Adamczyk.
- Examples: Fixes to keypadtest from Pierre-Noel Bouteville.
- Examples: These examples all set the IP address of eth1 but the
netmask and gateway of eth0 if DHCP is enabled: discover, tcpecho,
webserver, xmlrpc. That can't be right.
NuttX-7.7
---------
The 107th release of NuttX, Version 7.7, was made on January 26, 2015,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.7.tar.gz and
apps-7.7.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS:
- Task exit handling: Add logic to clean up after task_delete() or
pthread_cancel() if the task happens to be waiting on a semaphore
when was is cancelled.
- Stack coloration: Removed CONFIG_DEBUG_STACK and replaced it with
CONFIG_STACK_COLORATION that does the same thing but without enabling
debug. From David Sidrane.
* Common Drivers:
- Discrete joystick driver: Added an interface definition and upper
half driver for a discrete joystick device (where X/Y changes are
indicated with button presses).
- Analog joystick driver: Added an interface definition and upper
half driver for a analog joystick device (where X/Y positions are
sampled, numeric values).
- Add driver support for the ADXL345 accelerometer. From Alan
Carvalho de Assis
- Generic serial driver: Add watermark levels to the serial RX flow
control logic. Modify the rxflowcontrol method to accept the number
of bytes in the buffer and a boolean indication of which watermark
was crossed.
* File Systems/Block Drivers/MTD:
- Add procfs write support. From Ken Petit.
- Implemented wear-leveling in the SmartFS. From Ken Pettit.
- MMC/SD Interface: MMCSD SDIO: Add support for a new
SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait
loop to poll the card R1 status to determine when the card was
ready for the next transfer. That busy-wait can be quite long --
up to hundreds of milliseconds. An alternative is to look the SD D0
pin which will change state when the card is no longer busy. This
change avoids the busy-wait poll by reconfiguring the SD D0 pin as a
GPIO interrupt, then waiting for the card to become ready without
taking up CPU cycles. From David Sidrane.
* Drivers:
- Add support for a generic EEPROM driver that accesses EEPROM as a
character driver (vs. an MTD driver). From S<>bastien Lorquet.
* Graphics Support:
- Many new fonts converted for use with NuttX and added by
Pierre-noel Bouteville
* Networking:
- IPv4 support is now conditioned on CONFIG_NET_IPv4.
- Implemented and verified IPv6 support conditioned on
CONFIG_NET_IPv6. Either IPv4 or IPv4 or both may be selected.
Sockets, of course, must be bound to one or the other. Added support
for IPv6 ioctls to manipulate IP addresses.
- Integrated support for ICMPv6 and the ICMPv6 Neighbor Discovery
Protocol and ICMPv6 ECHO request/reply needed to support ping logic.
- All Ethernet drivers: Modified to support. Most, however, are
still missing address filtering logic required for ICMPv6 Neighbor
Discovery Protocol. See
http://www.nuttx.org/doku.php?id=wiki:howtos:ipv6#ethernet_driver_requirements
- Also added missing raw/packet socket support to all Ethernet drivers.
* Host Simulation:
- Add a configuration build and test the Traveler first person game
using the simulator.
- Add an X11 mouse-based simulation of an analog joystick device
* Atmel SAMA5D Boards:
- Add analog Joystick shield support for the SAMA5D3 Xplained board.
* Freescale KL Drivers:
- Add GPIO interrupt capability for the KL architecture. From Alan
Carvalho de Assis
* Freescale KL Boards:
- Freedom-KL25Z: Add board support for the ADXL345 accelerometer. From
Alan Carvalho de Assis
- Freedom-KL25Z: Update the Freedom KL25Z board CC3000 support to use
the current CC300 interfaces. From Alan Carvalho de Assis
* NXP LPC43xx Boards:
- A port of NuttX to the LPC4357-EVB from Toby Duckworth. This port
is a leverage of the LPC3330-Xplorer port and still have a some
misinformation from that port that needs to be updated for the
LPC4357-EVB.
* SiLabs EFM32 Drivers:
- Serial: Add support for serial termios TCGET and TCSET. For the
moment, only set/get speed is implemented. From Pierre-noel
Bouteville.
- RMU: Add support for the EFM32 reset management unit (RMU). From
Pierre-noel Bouteville.
* SiLabs EFM32 Boards:
- Add support for timer/PWM on the EFM32GG. From Pierre-noel
Bouteville
* STMicro STM32:
- Enable support for the STM32 F102. From the PX4 team.
* STMicro STM32 Drivers:
- STM32 F429 LTDC: Add interface to perform hardware accelerated layer
operation. Provides access to a reference of a specific ltdc layer.
From Marco Krahl
- STM32 F429 LTDC support: Implemented LTDC framebuffer support for the
generic nuttx framebuffer interface. Also implements the interface to
perform hardware accelerated layer operation by the ltdc controller
and dma2d controller later. From Marco Krahl.
- STM32: Add support for the internal low speed clock (LSI) as a
source of the RTC clock. Some boards do not have the external
32kKhz oscillator installed, for those boards we must fallback to
the crummy internal RC clock. From Kevin Hester
- STM32 SDIO: Add support for the new SDWAIT_WRCOMPLETE condition.
From David Sidrane
* STMicro STM32 Boards:
- Add a discrete Joystick support for the STM3210E-EVAL.
- Add analog Joystick shield support for the Nucleo F4x1RE boards.
- STM32 F429i-Disco: Add support for initializing of the ltdc
controller and the lcd device connected on the stm32f429i-disco.
From Marco Krahl.
- Removed the px4-v2_upstream configuration. This was not the
official configuration for the PX4 board and has led to confusion
by NuttX users. The board configuration also requires some ongoing
maintenance and customization to support ongoing PX4 testing and
evaluation. It is best retained the PX4 repositories where it can
be properly maintained and not in the upstream NuttX repository.
* TI Tiva:
- Add support for the TI Tiva TM4C 129X family. Some unverified
support for the TM4C 1294 is also in place.
* TI Tiva Drivers:
- Added support for Tiva I2C driver. Verified on the Tiva TM4C123G
and TM4C129X.
- Added a Tiva TM4C129X Ethernet driver.
- Add a timer library for generic support of Tiva timers
- Add a driver lower half for drivers/timer.c. Only 32-bit periodic
timers are supported. This provides userspace access to timers.
* TI Tiva Boards:
- TM4C123G Launchpad: Add initialization logic for an external AT24
EEPROM. This is intended only to support testing of the Tiva I2C
driver.
- Board support for the Tiva DK-TM4C129x Connected Development Kit.
- DK-TMC129X: Add an IPv6-enabled NSH configuration.
* C Library/Header Files:
- Added support for a variadic ioctl() function. The ioctl()
interface is a non-standard, Unix interface. NuttX has always used
the older, three-parameter version. Most contemporary systems now,
however, use a variadic form of the ioctl() function. Added an
option to insert a shim layer to adapt the three-parameter ioctl()
to use the variadic interface form. Internally, the ioctl handling
is the same three-parameter logic. The only real complexity to the
shim is in how the system calls must be handled.
- Added sys/custom_file.h. Used when CUSTOM_FILE_IO is define and
avoids re-definition errors about the FILE define. From Thomas
Gruber via the PX4 repository
- Add CRC8 support to the C library. From Ken Pettit.
- math.h: Added support for the expm1 functions. From Brennan Ashton
* Applications:
- apps/examples/djoystick: Add a test of the discrete joystick
driver.
- apps/examples/ajoystick: Add a test of the analog joystick
driver.
- apps/examples/ltdc: Add ltdc test example. From Marco Krahl
- apps/system/lm75: Add a tiny application to read the temperature
from an LM-75 (or compatible) temperature sensor
- apps/examples/timer: Add a trivial test of the timer driver
- apps/system/cu: Add a minimalist implementation of the 'cu'
terminal program (part of Taylor UUCP for ages). Using it, you can
simply open a serial port and interact with it. Using '~.' you can
leave the terminal program and drop back to nsh. This might come
in handy for people that have e.g. GSM modems, GPS receivers or
other devices with text based serial communications attached to
their Nuttx systems. From Harald Welte
- apps/interpreters/micropython: A port of Micro Python to NuttX.
Contributed by Dave Marples
- apps/netutils/dnsclient: Can select to be either IPv4 or IPv6, but
not both (IPv6 still does not compile)
- apps/netutils/netlib: Add new library functions to manipulate IPv6
addresses.
- apps/examples/nettest: Update test so that it can be used to test
IPv6 TCP sockets
- apps/examples/udp: The UDP test example has been extend to support
IPv6 domain sockets
- apps/nshlib: Add logic to initialize IPv6 addresses
- apps/nshlib: Add the ping6 command to support checking IPv6 networks.
- apps/nshlib: Clean up network status presentation for IPv6
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* IPv6. While basic IPv6 support was completed in NuttX-7.7,
there are lingering issues with getting IPv6 compatibility
with applications and network utilities.
* Processes. Much of the work in this release is focused on the
realization of Unix-style user processes in NuttX. There is more to
be done, however. The full roadmap and status is available at:
http://www.nuttx.org/doku.php?id=wiki:nxinternal:memconfigs#the_roadmap_toward_processes
* XMega: There are some fragments in place for an XMega port. That
port has not really started, however.
* Galileo: Similarly, there are fragments in place for an Intel Galileo
port. The port probably will not happen (I gave my Galileo board away!).
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- POSIX message queues: msg type should be char * not void * in
mq_send, mq_timedsend, mq_receive, and mq_timedreceive. Noted by
Pierre-Noel Bouteville
- POSIX message queues: In message queue creation return ENOSPC error
if size exceeds the configured size of pre-allocated messages; Use
ENOSPC vs ENOMEM per OpenGroup.org. From Pierre-Noel Bouteville.
- Task Names: strncpy() will not copy the terminating \0 into the
destination if the source is larger than the size of the
destination. Ensure that the last byte is always zero and let
strncpy() only copy CONFIG_TASK_NAME_SIZE bytes. The issue of
unterminated names can be observed in ps when creating a pthread
while CONFIG_TASK_NAME_SIZE is set to 8. From Daniel Willmann
* Memory Management:
- Granule allocator: Fixes some issues found by the PX4 team using
Coverity. From Pavel Krienko
* Networking:
- Several fixes correcting issues with the CC3000 networking. From
Jussi Kivilinna
- CC3000 Fix: Data can be unaligned. When dereferenced as an input
ntosh(), a bad value is returned. Reported by Alan Carvalho de
Assis
- Correct naming of fields in struct sockaddr_in6: sin6_port and
sin6_family, not sin_port and sin_family.
- accept(): Correct the value returned by accept() in the case where
net_lockingwait() is called. It was returning -1 and losing the
errno value. Noted by Rony Xln
* Common Drivers:
- Loop device should return -EINTR is interrupted by a signal.
- M25P serial flash driver: Add subsector size of the M24P16 part.
From Lazlo
- Common serial driver: In case a thread is doing a blocking operation
(e.g. read()) on a serial device, while it is being terminated by
pthread_cancel(), then uart_close() gets called, but the semaphore
is still blocked. This means that once the serial device is opened
next time, data will arrive on the serial port (and driver
interrupts handled as normal), but the received characters never
arrive in the reader thread. The problem was fixed by re-
initializing the semaphores on the last uart_close() on the device.
From Harald Welte
- Pipes: Fixes some issues found by the PX4 team using Coverity. From
Pavel Krienko
- CDC/ACM driver: Fixes some issues found by the PX4 team using
Coverity. From Pavel Krienko
* NXP LPC43xx Drivers:
- LPC4357: Changes required to get USART 2 & 3 working on the
lpc4357-evb. From Toby Duckworth.
* STMicro STM32:
- Several fixes correcting issues with the STM32 header files from
Jussi Kivilinna
* STMicro STM32 Drivers:
- Ported Tridge's STM32 I2C noise resilience logic from the PX4
repository.
- STM32 F2 and F4: Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin
configurations. This is based on an F411 SPI1 errata but the fixed
is generalized to all SPI and all F2 and F4. Discovered and fixed
by Sebastien Lorquet.
- Fix for STM32 OTGHS device driver working in FS mode. From Ken
Pettit.
- For STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC
AHB1 Register. If Both ULPI and the FS clock enable bits are set in
FS mode, then the ARM never awakens from WFI due to a chip issue.
This is only an issue if you are using the internal PHY. From Ken
Pettit.
- STM32 F429 LTDC: Add missing clut register definition. From Marco
Krahl
- STM32 serial: fix declaration and definition of up_receive() and
up_dma_receive() to match fields in the interface definition of
struct uart_ops_s. From Freddie Chopin.
* TI Tiva Drivers:
- Fix Tiva IRQ control logic; was limited to only 64 IRQs. That is a
problem for higher numbered IRQs on many platforms
* C Library/Header Files:
- avsprintf(): Fix a bug in usage of va_list on x86. On x86,
va_list is a pointer to a single copy on the stack. avsprintf()
calls lib_vsprintf() twice and so traverses the va_list twice using
va_start. va_start modifies that single copy on the stack so that
the second call to lib_vsprintf() fails. This appears to be an
issue with x86 only so far.
- stdint.h: Don't use hex values to specify minimum values of fixed
width, signed values. Hex values are inherently unsigned and not
usable for this purpose in all contexts.
- strncpy(): Would trash a lot of memory if n == 0. From Yasuhiro
Osaki.
- sscanf(). Accept %X and %F as well as %x %f as a format specifiers.
From S<>bastien Lorquet
* Applications:
- apps/examples/romfs: fix romfs example builtin app registry issue.
From Librae
- apps/system/cdcacm, composite and usbmsc: Fix some strangely placed
conditional compilation. Looks like an automated update went awry
- apps/netutils/telnetd: Add protection when CONFIG_SCHED_HAVE_PARENT
is enabled: Call sigaction with SA_NOCLDWAIT so that exit status is
not retained (no zombies) and block receipt of SIGCHLD so that
accept is not awakened by a signal. If accept() is awakened by a
signal, do not do anything crazy like exit. Most from Rony Xln
- apps/nshlib/: NSH TFTP get command: Wrong file name used for the
destination. From Lazlo
NuttX-7.8
---------
The 108th release of NuttX, Version 7.8, was made on February 11, 2015,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.8.tar.gz and
apps-7.8.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
This release is primarily a bugfix release for the NuttX-7.7 version that
was release just two weeks prior. That release included substantial
modifications in the NuttX networking to accommodate support for IPv6. This
release follows close behind NuttX-7.7 in order to correct some the problems
discovered in that networking code. This release does, however, include a
small number of new features and bug fixes unrelated to NuttX networking.
Additional new features and extended functionality:
* Core OS:
- Tickless Mode: added limit of maximum delay that can be request
by the scheduler tickless logic. This is necessary so that the
tickless logic does not request a delay beyond the capability of the
underlying hardware. From Macs Neklyudov.
* Common Drivers:
- VFS Unlink: Add an unlink method to both the character and block
driver interface. This is important because if the driver inode is
unlinked and there are no open references to the driver, then the
driver resources will be stranded. On the unlink call, the driver
has the opportunity (1) check if there an any open references, and
if not, (2) free the driver resources.
- Pipes and FIFOs: Implement the unlink method. If the pipe/FIFO is
unlinked, it will marked the pipe/FIFO as unlinked. If/when all
open references to the driver are closed, all of the driver
resources will be freed.
- Added an option to use the syslog'ing device as the system console.
This option enables a low-level, write-only console device at
/dev/console (similar to the low-level UART console device). From
Pierre-noel Bouteville.
* File Systems/Block Drivers/MTD:
- RAM/ROM disk: Add logic to dispose of the driver and RAM buffer
when the RAM disk has been unlinked and all open references to the
RAM disk have been closed. Add new parameters to romdisk() to
specify what should be done with the RAM/ROM buffer in this case --
Should it be freed or not? Changed all calls to ramdisk() to use
these new parameters.
* Networking:
- Add support for local, Unix domain sockets. Support included for
both SOCK_STREAM and SOCK_DGRAM style local socket.
- UDP enhancement: Add UDP read-ahead support. In addition to
eliminating the main reason for lost UDP packets, then change
enables support for for poll/select on UDP sockets and also non-
blocking UDP sockets. From Macs Neklyudov.
- SLIP interface improvements. From Macs Neklyudov.
- IPv6 Neighbor Solicitation: Added logic to support verification
that we have the IPv6 address in the Neighbor Table before sending
any packets. If not, then the Neighbor Solicitation message is
sent. This feature is important because otherwise the first packet
sent to a remote peer will fail (it would have been replaced with a
Neighbor Solicitation).
- IPv6 Autonomous Auto-Configuration: Added support for sending
ICMPv6 Router Solicitation and receiving Router advertisement. The
local IPv6 address, mask, and router address are then auto-configured
from the response..
- IPv6 Router Support: Add logic to behave like a router (if so
configured) only in the sense that NuttX will send the router
advertisement message in response to any received router solicitation
messages. Thus, one NuttX node in a network can configure the IPv6
addresses of all other nodes in the network.
- Optional IPv6 address filtering added to all Ethernet drivers for
the all-routers multicast address.
* Atmel AVR:
- Added architecture support for the Atmel AVR ATMega1284P MCU. From
Jedi Tek'Unum.
* Atmel AVR Boards:
- Added support for the LowPowerLab MoteinoMEGA that is based on the
Atmel AVR ATMega1284P MCU. From Jedi Tek'Unum.
* Atmel SAMA4:
- Add support for Tickless mode of operation for the SAM4CM platform.
From Macs Neklyudov.
* Atmel SAMA4 Drivers:
- Ethernet: The SAM4E Ethernet driver can now be configuration to
perform all network processing on the work queue. This greatly
reduces the amount of interrupt level processing to service Ethernet
packets.
- SAM4E Ethernet: Add support multicast address matching and IPv6.
* Atmel SAMA4 Boards:
- SAM4E-EK: The nsh configuration now configures the Ethernet driver
for execution on the work thread.
* Atmel SAMA5D Drivers:
- SAMA5D4 Ethernet: The SAMA5D4 Ethernet driver can now be configuration
to perform all network processing on the work queue. This greatly
reduces the amount of interrupt level processing to service Ethernet
packets.
- SAMA5D3 and SAMA5D4 Ethernet: Add support multicast address matching
and IPv6.
* Atmel SAMA5D Boards:
- SAMA5D4-EK; Added a configuration to testing IPv6.
- SAMA5D4-EK: Converted the nsh and ipv6 configurations to configure
the Ethernet driver to use the work queue (vs. interrupt level
processing).
* Freescale KL:
- Add architectural support for the K26Z128VLH4 chip. From Derek B. Noonburg.
* Freescale KL Boards:
- Add board support for the Freedom KL26Z board. From Derek B. Noonburg.
* NXP LPC17xx Drivers:
- Ethernet: Add support multicast address matching and IPv6.
* SiLabs EFM32:
- Add configurable option to unconditionally enable LE clocking. Even
you don't use core clock LE as source for LFA or LFB, to read are
write any register not clocked by HFPERCLK or HFCORECLK, HFCORECLKLE
should be enabled. From Pierre-noel Bouteville.
* SiLabs EFM32 Drivers:
- EFM32 RTC: RTC driver using BURTC. From Pierre-Noel Bouteville.
* STMicro STM32 Drivers:
- AES: Add driver for STM32L162XX AES peripheral. From Juha Niskanen.
- Ethernet: The STM32 Ethernet driver can now be configuration to
perform all network processing on the work queue. This greatly
reduces the amount of interrupt level processing to service Ethernet
packets.
- Ethernet: Add support multicast address matching and IPv6.
* STMicro STM32 Boards:
- Added an IPv6 configuration for the STM32F4-Discovery board (with the
STM32-DISCO_BB base board).
- Converted all STM32F4-Discovery configurations (with base board) to
configure the Ethernet driver to use the work queue (vs. interrupt
level processing).
* TI Tiva Drivers:
- Added support for TM4C123G timers. From Calvin Maguranis.
- Added a Tiva ADC driver. From Calvin Maguranis.
* TI Tiva Boards:
- Added TM4C123G timers on the TM4C123G Launchpad. From Calvin Maguranis.
- Added Tiva ADC support to the TM4C123G-Launchpad. From Calvin Maguranis.
* C Library/Header Files:
- Math Library: Added support for inverse hyperbolic functions,
isfinite(), error functions, nan(), copysign(), and trunc()
functions. From Brennan Ashton.
* Applications:
- apps/examples/ustream: Add a simple test of Unix domain stream
sockets.
- apps/examples/udgram: Add a simple test of Unix domain datagram
sockets.
- apps/netutils/netlib: Add utilities to convert to/from prefix
lengths from/to 128-bit network masks.
- apps/nshlib: Modify the NSH IPv6 ifconfig command to show the more
standard post-pended prefix value, rather than the full 128-bit
netmask.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* Processes. Much of the work in this release is focused on the
realization of Unix-style user processes in NuttX. There is more to
be done, however. The full roadmap and status is available at:
http://www.nuttx.org/doku.php?id=wiki:nxinternal:memconfigs#the_roadmap_toward_processes
* XMega: There are some fragments in place for an XMega port. That
port has not really started, however.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- Work Queues: Fix a backward calculation when determining the time
to the next interesting event. . From Liio Chen via the PX4
repository.
- clock_systimespec(): Fixes for compilation errors in certain
configurations. From Macs Neklyudov.
* Graphics
- Fixed a problem with one of the font files. From Pierre-noel Bouteville.
* Networking:
- IOB Deadlock: There were issues with the TCP write-ahead buffering
if CONFIG_NET_NOINTS was enabled: There is a possibility of
deadlocks in certain timing conditions: The network should never
wait for TCP read-ahead buffering space to be available. It should
drop the packets immediately if no buffering is available. This was
fixed by duplicating most of the IOB interfaces: The versions that
waited are still present (like iob_alloc()), but now there are non-
waiting versions of the same interfaces (like iob_tryalloc()). The
TCP read-ahead logic now uses only these non-waiting interfaces.
- TCP Deadlock: Fix another deadlock when CONFIG_NET_NOINTS is enabled.
tcp_write_buffer_alloc() calls sem_wait() with network locked. That
worked if CONFIG_NET_NOINTS was not defined because interrupts are
automatically restored when the wait happens. But with
CONFIG_NET_NOINTS=y, the wait blocks with the network locked -- bad
style and also can lead to a deadlock condition.
- ARP response waiting: Fixes another CONFIG_NET_NOINTS issue. When
called sem_timedwait() with the network locked, the network stays
locked while we wait which is not what we want (without CONFIG_NET_NOINTS,
interrupts are re-enabled while we wait and all is well).
- TCP accept(): Fix a major TCP bug introduced with the NuttX-7.7
IPv6 changes: Some connection logic was reordered; setting the
socket as 'connected' got moved to BEFORE the point where the check
was made if the socket was already connected. The resulting behavior
was odd: Telnet would connect, but then when you exit and reconnect,
it would fail to connect. But then if try again, it would connect
okay. So the symptom was connect-fail-connect-fail-...
- Lots of build problems introduced into multiple NIC support with the
IPv6 changes of NuttX-7.7. Many places where conditional logic based
on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK.
Lots of code changed with IPv6 that was never compiled with MULTINIC
enabled.
* Common Drivers:
- Pipes and FIFOs: Fix a race condition between FIFO buffer operations
and the opening and closing of FIFOs which necessary when the FIFOs
are used to support Unix domain, datagram sockets. The default
policy is the deallocate FIFO buffering when the last client closes
the pipe. When when used for datagram communications, packets left
in the FIFO will be lost. Some like UDP read-ahead is needed: The
buffered data in the FIFO needs to be retained until the reader gets
a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to
control the buffer policy. Default (0) is the legacy behavior; Unix
domain datagram logic sets the alternative policy so that the packet
data persists after the FIFO is closed.
- RAMTRON: Table of parts is not terminated properly if
CONFIG_RAMTRON_FRAM_NON_JEDEC is not defined. Noted by David
Sidrane.
* All Architectures:
- Removed all occurrences of up_maskack_irq() that disables interrupts
with up_ack_irq() that only acknowledges the interrupts. This is only
used in interrupt decoding logic. Also remove the logic that
unconditionally re-enables interrupts with the interrupt exits. This
interferes with the drivers ability to control the interrupt state.
This is a necessary, sweeping, global change and unfortunately
impossible to test.
* ARM
- ARMv7-A and ARMv7-M memcpy(): Optimized ARM assembly language
memcpy's were not returning a value in R0 they are required to do.
From David Sidrane.
- ARMv7-A interrupt handler should not automatically re-enable interrupts
on interrupt return. That interferes with the driver's ability to
manage interrupts. Analogous change made to all other architectures
as well (ARM7, ARM9, HC, SH, x86, z16, z80, etc,. See above.).
* STMicro STM32:
- GPIO Interrupts: Disabling any of EXTI 5-9 interrupts was disabling
interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi
Kivilinna.
* STMicro STM32 Drivers:
- RTCC: Fix for recent changes that caused compilation failrues with
STM32L15XX configurations. From Jussi Kivilinna.
- SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1
(for F411, F427, and F429). Per David Sidrane.
* C Library/Header Files:
- execl(): Fix bad logic in counting the number of arguments.
execl() parameter passing could never have worked. Noted by
Pierre-noel Bouteville.
* Applications:
- Fix for building with parallel make. Build-server sometimes failed
'make -j24' with errors in the builtin line or or sometimes silently
succeeds but generated builds that contain a random subset of
configured NuttX applications. There are two root causes for this:
(1) Recipes for building builtin_list.h and builtin_proto.h are
not linearizable, and (2) Nothing ensures that 'make context' is run
first for apps/builtin. This change address both issues. From Juha
Niskanen.
NuttX-7.9
---------
The 109th release of NuttX, Version 7.9, was made on April 14, 2015,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.9.tar.gz and
apps-7.9.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Core OS:
- Assertions: Add support for dumping board-specific information on
assertions. From David Sidrane.
- boardctl(): : Add a new non-standard OS interface called boardctl().
This is similar to a driver IOCTL call. But this is an IOCTL call
directly on the board logic. This function will eventually replace
all of the ad hoc OS interfaces that are current used to perform
application specific initialization and application driver test
configuration. It essentially formalizes and institutionalizes
these rogue interface in to at least a single crazy call.
* Graphics:
- Line Joins: Line drawing graphic functions now take an argument that
will draw a circular "cap" on the ends of lines to support cleaner
joining of lines segments..
* Common Drivers:
- SPI iInterface: Add an SPIDEV_USER so that there can be board-
specific definitions of SPI devices.
- I2C Interface: Add a user provided void * argument to the I2C
callback method for the I2C slave interface. Suggested by Nate
Weibley.
- AT24 EEPROM Driver: Add support for (1) the byte-oriented read()
method, (2) devices that have extended memory regions, and (3)
devices that use 8-bit addressing.
- Freescale MPL115A barometer: Add driver for the Freescale MPL115A
barometer. From Alan Carvalho de Assis.
- CS2100-CP: Add a driver for the CS2100-CP Fractional-N Multipler
chip.
- RTC IOCTls: Added the definitions of a driver based RTC interfaces
and RTC upper half driver.
* File Systems/Block Drivers/MTD:
- umount2(): Added to support un-mount flags. umount() is now a macro
that just calls umount2() with flags = 0.
- File system interface: Pass the umount2() flags to every unbind()
implementation. That is where the decision to umount or not and how
to umount will be made.
- FAT unbind: Add support for umount2(target, MNT_FORCE) in the FAT
file system.
* Networking:
- netdev_register(): Improve the network device registration logic.
When multiple link types are used, modify how each interface number
is assigned to the device name by incrementing the device number
individually for each interface link type. From Max Neklyudov.
- Add TUN network device. Used to support the Netutils PPPD
implementation. From Max Neklyudov.
* ARMv7-M
- ARM Cortex-M7: Add basic support for the Cortex-M7 architecture.
- ARMv7 Common Lazy Exception handling. Add common support for lazy
FPU state saving. MCU-specific lazy FPU saving was already in place.
This change just makes the code share-able.
* Atmel SAMA5D3/4 Drivers:
- SAMA5 Serial: Backport support for flowcontrol and termios from
SAM3/4.
* Atmel SAMV7:
- Atmel SAMV7: Add architecture support for the Atmel SAMV7 family
(Cortex-M7)
* Atmel SAMV7 Boards:
- Atmel SAMV71 Xplained Ultra: Add board support for this SAMV7 board.
This initialize release includes support for: SDRAM, TWI/I2C, SPI,
Ethernet, HSMCI, DMA, GPIOs, UARTs, AT24 EEPROM and the maXTouch
Xplained Pro LCD. Drivers are available for SSC/I2C, the WM8904,
the maXTouch trouchscreen, and USB device but have not yet been
fully integrated in this release.
* SiLabs EFM32 Drivers:
- EFM32 USB Device is now functional with the efforts of From Pierre-
noel Bouteville.
- EFM32 I2C: Add I2C driver. From Pierre-noel Bouteville.
* STMicro STM32:
- STM32F372/F373: Adds architecture support for this STM32 parts.
Tested on STM32F373CC. Contributed by Marten Svanfeldt.
* STMicro STM32 Drivers:
- STM32 RTCC: Break out a new internal interface, stm32_rtc_setdatetime().
This eliminates some un-necessary time conversions. From Freddie Chopin.
- STM32 RTCC: Add an implementation of the RTC lower half interface
for the STM32.
- STM32 RTCC: Extend the RTC interface to support reading subseconds.
From Jussi Kivilinna.
- STM32 BBSRAM: Adds the ability to use the STM32F2 and STM32F4 Battery
Backed SRAM in the file system. With an option to Save Panic context
to one of the files. From David Sidrane.
* STMicro STM32 Boards:
- Olimexino-STM32: Board support for the Olimexino STM32 board from David
Sidrane.
- Viewtool-STM32F107: Add support for an optional, add-on Freescale
MPL115A baramoter. From Alan Carvalho de Assis.
* TI Tiva:
- TM4C1294: Add support for the TM4C1294. Contributed by Frank Sautter.
* TI Tiva Drivers:
- Tiva ADC: Updated files to allow for ADC and PWM triggering by a
timer. Refactoring of ADC implementation. From Calvin Maguranis.
- Tiva Timer: Refactoring by Calvin Maguranis
* TI Tiva Boards:
- TM4C123G-launchpad: Add ADC support. From Calvin Maguranis.
- TM4C123G-launchpad: Add board button interrupt support. From Calvin
Maguranis.
- TM4C1294 Launchpad: Add support for the TM4C1294 Launchpad.
Contributed by Frank Sautter.
* Microchip PIC32
- PIC32MZ: Add architectural support for the PIC32MZ (MIPS32 M14k).
Includes contributions from Kristopher Tate.
* Microchip PIC32MZ Boards
- PIC32MZ Starter Kit: Add basic board support for the PIC32MZ.
Includes contributions from David Sidrane.
* C Library/Header Files:
- gettimeofday(): This function is no longer a core OS interface. It
is only a wrapper around clock_settime().
- settimeofday(): Added. gettimeofday has been deprecated in POSIX
2008. settimeofday() was never part of POSIX, but I decided to add
it to libc as well just for symmetry.
- Day-of-Week: Add CONFIG_TIME_EXTENDED to support the last 3 members
of the tm struct and support for filling them in with the day of the
week. From David Sidrane.
- sighold(), sigrelse(), sigignore(), sigset() and sigpause(): New
signal handling functions.
- sys/select.h: Extend the fd_set type definition so that it can
handle more than 32 descriptors (if so configured). From Max
Neklyudov.
- netdb.h: Add a mostly-commented-out version of the standard netdb.h
header file.
- include/nuttx/board.h: Remove common board function prototypes from
other files and consolidate them in this new header file.
* Applications:
- OS test: Improved error checking for sem_timedwait() from Juha
Niskanen.
- OS test: Add a simple test of sigprocmask, sighold, and sigrelse.
- PPPD test: Add PPPD test case. Split out from the PPPD daemon by
Brennan Ashton.
- Netutils: Add a PPP daemon. From Max Neklyudov.
- NSH: NSH initialization now calls boardctl(BOARDIOC_INIT) instead
of nsh_archinitialize(). Remove support for CONFIG_NSH_ARCHMAC.
It is not used and there are better ways to do that operation.
- NSH: Allow NSH 'date' command with no hardware RTC. This command
is useful without an RTC too. Also, this permits testing on the
simulator which never has an RTC.
- apps/examples/: Several tests changed (touchscreen adc, pwm,
graphics). No longer call directly into the OS, but rather
indirectly via boardctl().
- Modbus: Includes extensions to support RTU master mode by
Armink(383016632@qq.com): https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32.
Ported to NuttX by Darcy Gong.
- TZ database: All logic to build timezone database needed for
localtime() support. Does not do much else yet.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* Processes. Much of the work in this release is focused on the
realization of Unix-style user processes in NuttX. There is more to
be done, however. The full roadmap and status is available at:
http://www.nuttx.org/doku.php?id=wiki:nxinternal:memconfigs#the_roadmap_toward_processes
* XMega: There are some fragments in place for an XMega port. That
port has not really started, however.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- atexit(): Fix compile failure due to reference to undefined variable
in certain configurations. From Juha Niskanen.
- syscalls: Last changes to message queue prototypes did not make it
into call gate logic. Some additional errors had crept as well since
the system calls are seldom used.
- waitpid(): Do not use uninitialized boolean in waitpid(). From Juha
Niskanen.
- Timing functions: Fix some nanosecond comparisons. Comparisons should
be greater than OR EQUAL TO 1000000000 for maximum value of nanoseconds
in struct tm. From Juha Niskanen.
- Time initialization: Fix an error in time initialization when there
is no RTC and the time is initialized from a fixed configured value.
The call to clock_calendar2utc() was returning the time in units of
seconds. The initialization logic, however, was expecting to get
time in units of days. This problem has been there forever but
obviously has not significant impact to behavior in systems where
time is not visible.
- mq_timedsend(): Should not check for valid time if there is space
in the message queue. Noted by Freddie Chopin.
- select() and sem_timedwait(): Fix places where the errno value was
being overwritten by subsequent actions so that the returned errno
value was incorrect. From Max Neklyudov.
- clock_systimer64(): Fix a problem in clock_systimer64 that occurs
when (1) the 64-bit system time is enabled, and (2) the value of
CONFIG_USEC_PER_TICK is less than 1 milliseconds (such as when using
the tickless mode of operation). In that case, the conversion of
time to 64-bit millisecond value in clock_systmer64() causes some
bad times to be returned. Time was converted to milliseconds, then
to configured ticks. Precision was lost in the millisecond
conversion. The fix is to first convert time to a 64-bit microsecond
value, then to the configured tick value. Noted by David Sidrane.
- clock_systimespec(): When an RTC is used clock_systimespec() must
subtract the basetime from the returned time. It needs to return
the time since power up, no the current time. Issue noted by Max
Neklyudov.
- AIO: correct some backward tests in aio_read() and aio_write():
Socket descriptors have higher numbers than file descriptors. In
aio_contain(), Copy u.ptr (void *) when initializing aioc and not
the case specific u.aioc_filep. From Michal Ulianko.
* File Systems/Block Drivers/MTD:
- procfs: Fix potential NULL pointer dereference of 'node'. From
Juha Niskanen.
- FAT: fat_unbind() was accessing 'fs->fs_sem' after freeing the 'fs'
struct. From Juha Niskanen.
- mkfatfs: Use DMA memory for mkfatfs when needed. This makes mkfatfs
use fat_dma_alloc() when CONFIG_FAT_DMAMEMORY is set. This is needed
to ensure mkfatfs operates with boards that use DMA for microSD.
From Andrew Tridgell via the PX4/NuttX repository.
- FAT unmount: Fix a bug in the FAT unbind() logic. There were
problems with the way certain internal list handling was
implemented. The end result is that newly opened or cloned file
structures were never being added to the list of open files. So
when the unmount() happens, it always looked like there were not
open files and a crash could ensue.
- FAT mounting: Fix misthink when CONFIG_ENDIAN_BIG=y. From Lwazi Dube.
* Common Drivers:
- CAN upper half driver: Some lines had to be reordered in the can_open
function otherwise the open count will only be incremented from 0 to
1. This caused problems when trying to open the can bus from two
different tasks. SourceForge Patch #46.
* Crypto:
- crypto: Fix issues when AES support was added for the STM32L1.
From Juha Niskanen.
* Networking:
- Network initialization: Divide net_intiialize() into net_setup() and
net_initialize() to solve a chicken-and-egg problem. net_setup()
must be called before up_initialize() is called so that networking
data structures are ready to register new network devices.
net_initialize() now does only timer related operations and is
called AFTER up_initialize() where the timers are configured.
Problem noted by Max Neklyudov.
- netdev_unregister(): Fix a list handling error. From Max Neklyudov.
- Socket dup: Do not call sockfd_socket() twice. From Juha Niskanen.
* Common Drivers:
- max11802 touchscreen: Fix possible unmatched IRQ restore (not
normally a problem, but could happen in certain configurations).
Noted by Juha Niskanen.
- MMCSD SPI Multi-block transfers: ACMD23 must be preceded with CMD55
command as any other ACMD commands. Also, after the block reading
wait loop must be inserted before writing the next block of data to
the sd card. From Dmitry Nikolaev via Jussi Kivilinna.
- MMCSD SDIO: Fix some bad logic when file system debug is turned on:
Arguments to syslog were missing so that garbage was being printed.
- Common upper-half serial driver: Report correct number of bytes free
in serial buffer with FIONWRITE. From Sami Pelkonen via Jussi Kivilinna.
- Pipes/Fifos: Fix zero-lenth writes to pipes/FIFOs. From Jussi Kivilinna.
- USB device MSC: Add NULL pointer check. From Juha Niskanen.
- BCH driver: Avoid NULL pointer dereference when bch->refs == 255.
From Juha Niskanen.
- Various drivers: The inode unlink method should not be support if
operations on the root pseudo-filesystem are disabled.
* ARMv7-M
- ARMv7M MPU: Bad syntax in ARMv7-M MPU logic would cause failure to
write the correct value to the MPU_RASR register. From Juha Niskanen.
* Atmel SAM3/4 Drivers:
- SAM3/4 Serial TERMIOS: A side-effect of changing serial settings
via TERMIOS (such as tcsetattr) is that serial interrupts were being
left disabled. This is not a problem if the serial configuration is
changed when there are no open references to the serial device. In
that case, serial interrupts are disabled and will not be enabled
enabled until the serial device is first opened. But it is fatal if
the serial device is already opened and if there is a task waiting
to receive data. In that case, the side-effect of disabling
interrupts is fatal: That task is then left hanging with interrupts
disabled.
- SAM3/4 Serial: The IMR register is read-only. This means that
sam_restoreints() did not actually re-enable UART interrupts
(Fortunately, that function was not being used up to this point).
- SAMA5 HSMCI: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift
values were reversed resulting in a trashed value for the number of
blocks in the BLOCKR register. This was sufficient to prevent DMA
writes from working.
* Atmel SAMA5 Drivers:
- SAMA5 Timer/Counter: Fix typos in timer/counter header file. From
Bob Doiron.
* STMicro STM32 Drivers:
- STM32 PWR and RTC: Changes to support fully write protecting the
backup domain. N.B. stm32_pwr_enablebkp did not account for the delay
from enable to the domain being writable. The KISS solution is a
up_udelay. A more complex solution would be a negated write test
with restore. From David Sidrane.
- STM32 SPI: Add missing SPI callback functions to the STM32 SPI
driver. From Freddie Chopin.
- STM32 I2C: Add missing NULL check. From Juha Niskanen.
- STM32 USB device: Fix stale initialization invalidating later NULL
check. From Juha Niskanen.
- STM32 UART: Fix RX DMA setup for UART5. From Jussi Kivilinna.
- STM32 UART: Make input hardware flow-control work with RX DMA. From
Jussi Kivilinna.
- STM32 RTC and clock control: The STM32F4Discovery board doesn't
come with a Low speed external oscillator so the default LSE source
for the RTC doesn't work. In stm32_rtcc.c the up_rtc_initialize()
logic doesn't work with the LSI. The check on RTC_MAGIC on the BK0R
register lead to rtc_setup() call that rightfully enables the LSI
clock; but the next times, when the rtc is already setup, the
rtc_resume() call does NOT start the LSI clock! The right place to
put LSE/LSI initialisation is inside stm32_stdclockconfig() in
stm32fxxxxx_rcc.c. Doing this I checked the possible uses of the
LSI and the LSE sources: the LSI can be used for RTC and/or the
IWDG, while the LSE only for the RTC (and to output the MCO1 pin).
This change is not verifed for any other platforms. From Leo
Aloe3132
* Tiva Drivers:
- Tiva GPIO driver needed small fixes in the configuration routines and
discovered false-positive bugs in interrupt testing: interrupts are
now verified to actually be working reliably. From Calvin Maguranis .
* MIPS32:
- mips32/Toolchain.mk: Current Pinguino toolchain uses the prefix p32-
instead of mips-.
* C Library/Header Files:
- sigaddset() and sigdelset(): Need to set errno if a bad signal
number is received.
- sfrtime(): Missing implementation of %C in sfrtime() C (was being
treated as %y). From Freddie Chopin.
- pthread.h: Fix PTHREAD_COND_INITIALIZER.
- ungetc.c: Fix NULL pointer dereference in ungetc() if 'stream' was
NULL, 'stream->fs_oflags' was evaluated. From Juha Niskanen.
- Fixes to asinh(), atanh(), and sinh(): The 'basic' expansions all
exhibited bad cancellation errors near zero (<= 1E-10). This can be
easily seen e.g. with x = 1E-30, the results are all zero though they
should be extremely close to x. The cutoff values (1E-5, 1E-9) are
chosen so that the next term in the Taylor series is negligible (for
double). Functions could maybe be optimized to use only first term (x)
and a smaller cutoff, just bigger than where the cancellation occurs
- localtime(): Inconsistent configuration name: CONFIG_LIBC_TZDIR vs
CONFIG_LIBC_TZ_TZDIR. Former wins.
* Applications:
- Modbus: Fix some compile problems when TCP is enabled.
NuttX-7.10
----------
The 110th release of NuttX, Version 7.10, was made on June 9, 2015,
and is available for download from the SourceForge website. Note
that release consists of two tarballs: nuttx-7.10.tar.gz and
apps-7.10.tar.gz. Both may be needed (see the top-level nuttx/README.txt
file for build information).
Additional new features and extended functionality:
* Binary Loader:
- ARMv-7M, binfmt/, STM32: Add support uClibc++ exceptions. This
involved additional handling for relative relation types, additional
support for unwinding, as well as additional changes. The
culmination of a big effort from Leo Aloe3132.
* Graphics/Graphic Drivers:
- RA8875 LCD driver contributed by Marten Svanfeldt.
* File Systems/Block Drivers/MTD:
- Union File System: Add support for a union file system that can be
used to overlay and merge the content of two mounted file systems.
* USB Host:
- USB Hub Support: Bring in USB hub-related files from
https://github.com/kaushalparikh/nuttx. This is the work of Kaushal
Parikh. This is quite a bit more hub logic was needed in before the
USB hub support was fully functional. This involved changing many
USB host controller driver interfaces and modifications to many
drivers.
- USB host CDC/ACM class driver: Added initial implementation of a
host-side CDC/ACM driver. Initial version was a great learning
experience, but probably should be partially redesigned (as
discussed in the top-level TODO file).
- IPv6 Routing: Complete implementation of the IPv6 routing logic.
From Max Neklyudov.
* Networking:
- Local Sockets: Add poll support for Unix stream sockets. From Jussi
Kivilinna.
- net/: ARP, ICMP, ICMPv6, PKT, TCP, and UDP now all receive event
notifications from both network device packet processing, but now
also from Device-specific events such as when the network goes down.
The device notification callback structure is now supports dual
linkages so that the client can receive notifications from both
source; The device structure now includes a list of clients that
want to receive device related notifications. This prevents network
actions from hanging when the device goes down and will be an
essential part of future support for removable network devices.
Some of the core logic was contributed by Max Neklyudov.
- TUN: Misc. improvements to the TUN driver, mostly related to poll().
Also several bugfixes. From Max Neklyudov.
* Simulation Platform:
- Simulator: Add logic to test localtime and TZ database. See
apps/system/README.txt for info.
- Simulation: Add a configuration for testing the Union File System.
* Calypso:
- Calypso Compal-E86: Updates for execution out of FLASH on the C139
phone. From Craig Comstock.
* Atmel SAMD/L:
- SAML21 Support: And chip definitions, configuration framework,
memory map and pin configuration files for SAML21 support.
* Atmel SAMD/L Boards:
- SAML21-Xplained: Add a board support for the SAML21 Xplained Pro.
This is based on the similar SAMD20 Xplained Pro board.
* Freescale/NXP KL:
- KL25Z64: Added support for the KL25Z64. The KL25Z64 is a lower
memory variant of the KL25Z128 and is used on the Teensy LC. From
Michael as SourceForge patch 50.
* Freescale/NXP KL Boards:
- Teensy-LC: Add board support for the Teensy LC board. Support is
based off the Freedom KL25Z board. LED, PWM, and UART0 have been
tested. The SPI pins are mapped correctly but have not yet been
tested. From Michael Hope as SourceForge patch 51.
* NXP LPC111x:
- LPC111x: Support for the LPC11xx family (the LPC1115 MCU in
particular). Contributed by Alan Carvalho de Assis.
* NXP LPC111x Boards:
- LPCXpresso LPC1115: Support for the LPCXpression LPC1115
board. Contributed by Alan Carvalho de Assis.
* NXP LPC17xx Drivers:
- LPC17xx Ethernet: Add support for the Micrel KSZ8041 PHY to the
LPC17xx Ethernet driver.
* NXP LPC17xx Boards:
- Lincoln60: Add a network enabled configuration for the Lincoln60
board.
* Atmel SAM3/4 Drivers:
- SAM4CM: Add support for optical mode for the SAM4CM UART1. From
Max Neklyudov.
* Freescale (NXP) Kinetis:
- Kinetis K20: Basic support for the Kinetis K20 architecture. Taken
from PX4. This is the work of Jakob Odersky.
* Atmel SAMV7 Boards:
- SAMV71-Xplained w/maXTouch Xplained Pro: A TWIHS fix was the last
barrier to getting the touchscreen working in the maXTouch Xplained
Pro LCD. Added the NxWM integrated graphics demonstration
configuration.
* STMicro STM32:
- STM32: Added support for STM32F302K8 and STM32F302K6. From Ben Dyer
via PX4/David Sidrane.
- STM32F205RG: Add basic support for the STM32F205RG. From SourceForge
Ticket 40 (anonymous, 2015-05-31).
- STM32 F3: Add DBGMCU register definitions for the F3 family. From
Greg Meiste.
* STMicro STM32 Drivers:
- STM32 LCDC: Defined a second interface for the dma2d controller.
LTDC only controls the display visibility but the DMA2D controller
changes the content of the frame buffer (buffer of the layer). From
Marco Krahl.
- STM32 PVD: Added support for STM32's Programmable Voltage Detector
(PVD) feature. By Dmitry Nikolaev, submitted by Juha Niskanen.
* STMicro STM32 Boards:
- STM32F429i-Disco: Add support for the new DMA2D features to the LTDC
configuration. From Marco Krahl.
* TI Tiva Boards:
- TM4C1294 Launchpad: Added TM4C1294NCPDT EN0_LED2 (10/100-Base-Tx);
removed all booster pack pin definitions. From Frank Sautter.
* C Library/Header Files:
- libc: Add an option to disable support for long long formats in
lib_vsprintf(). On very tiny platforms, this reduces the footprint
by omitting large libgcc.a libraries to perform the 64-bit
arithmetic operations. From Alan Carvalho de Assis.
* Applications: apps/system:
- nuttx/zoneinfo: Add logic to build a ROMFS file system
containing the timezone data.
* Applications: apps/nshlib:
- Add poll support for Unix stream sockets. From Jussi Kivilinna.
- Enhancements to NSH ifconfig for case of multi-link operation, TUN
device and local connections. From Max Neklyudov.
- Enhanced output to NSH ping command from Max Neklyudov.
- The NSH mount command now recognizes the Union filesystem type when
listing mounted file systems.
* Applications: apps/netutils:
- apps/netutils/thttpd/ and apps/examples/thttpd/: Add support for
using binfs/ with the Union FS instead of NXFLAT. NXFLAT is
probably the better solution but recently compiler changes make it
unusable. binfs or ELF are fallback binary formats. This commit
adds an option to use binfs with the Union FS.
* Applications: apps/examples:
- Modify/simpify apps/examples build files. From Roman Saveljev.
- apps/examples/ltdc: Add testing support for the STM32 LTDC's 2D DMA.
From Marco Krahl.
- apps/examples/ostest: Add a test of nested signals. There are no
failures to handle signals but neither am I getting any nested signal
handling.
- apps/examples/elf: Add configuration options to support building the
hello++4 example that depends upon having uClibc++ available. Also
add hello++5 to the ELF example From Leo aloe3132.
- apps/examples/unionfs: Add a test of the union file system to
apps/examples.
Efforts In Progress. The following are features that are partially
implemented but present in this release. They are not likely to be
completed soon.
* Processes. Much of the work in this release is focused on the
realization of Unix-style user processes in NuttX. There is more to
be done, however. The full roadmap and status is available at:
http://www.nuttx.org/doku.php?id=wiki:nxinternal:memconfigs#the_roadmap_toward_processes
* XMega: There are some fragments in place for an XMega port. That
port has not really started, however.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- boardctl(): Add missing case causing that caused failures of PWM
test.
- pthread_kill(): Re-implemented pthread_kill(). It was just a simple
wrapper around kill() but since the correct dispatching of signals
for multi-threaded task groups has been implemented, calling kill()
does not do what pthread_kill() is supposed to do. The corrected
implementation of pthread_kill() will direct the signal specifically
to the specific pthread and no other.
- uint32_t callbacks: Update the type passed to watchdog timer
handlers. Using uint32_t is a problem for 64-bit machines because
it it too small to pass a pointer. uintptr_t is a more appropriate
type.
- mq_timedreceive(): move the location where the errno value is set;
the ETIMEDOUT errno setting was being overwritten by subsequent
actions before returning. Noted by Freddie Chopin.
- POSIX message queues: Move mq_setattr() and mq_getattr() from
nuttx/libc/mqueue to nuttx/sched/mqueue. Also add syscall support
for mq_setattr() and mq_getattr(). This is necessary in protected
and kernel builds because in those cases the message queue
structure is protected and cannot be accessed directly from user
mode code.
* File Systems/Block Drivers/MTD:
- MTD: Increase the size of the fields in the geometry structure
(again) to support larger FLASH sizes. Needed by Sebastien Lorquet.
* Common Drivers:
- poll(): Fix resource leak and memory corruption on poll failure.
From Jussi Kivilinna.
* USB Host:
- LPC31xx and SAMA5Dx EHCI: Fix cache related problem in LPC31 and
SAMA5Dx EHCI drivers. All buffers are now aligned with the cache
line size in both starting address and in length. This cause major
problems in unlucky builds where the USB host buffers where
unaligned and abutting other data. The cache flush and invalidate
operations could be subverted by accesses to adjacent data or could
have unexpected side effects. This bug has been in the ECHI drivers
forever, but was only revealed due to unlucky memory allocations
during the integration of the hub feature.
* USB Device:
- All USB device class drivers: There needs to be a check to make
sure that the size of a returned string does not exceed the size of
the allocated request buffer. Strings such as vendor names or
product names will be truncated to fit in the request buffer.
* Networking:
- TCP: Correct failures in long Telnet sessions by increasing th
size of the number of bytes sent from uint16_t to uint32_t. This
avoids an integer overflow that causes a long Telnet session to be
closed unexpectedly. From Rony XLN.
- Network locks: Correct some network lock logic: Two error
conditions where the network was not being unlocked and one where it
was getting unlocked twice. From Jussi Kivilinna.
- Local Sockets: Local stream sockets had problem of double releasing
pipes (both server and client attempt release), which causes wrong
pipe pair being closed in multi-client case. Solve by adding per
connection instance ID to pipe names. From Jussi Kivilinna.
- TCP: Fix an important TCP networking bug: 16-bit flags was being
converted to 8-bits in a few locations, causing loss of status
indications.
- TCP: net_startmonitor() always returned OK. In the race case
where a socket has already been closed, it correctly handled the
disconnection event but still returned OK. Returning OK caused the
callers of net_startmonitor() to assume that the connection was
okay, undoing the good things that net_startmonitor() did and
causing the socket to be incorrectly marked as connected. This
behavior was noted by Pelle Windestam.
- setsockopt() failed when setting timeouts to values less tha 100
msec. That is because the timeout is limited to stops of 1
decisecond and because the conversion of structure timeval was
truncating the microsecond remainder. The utility
net_timeval2dsec() now accepts and option to determine how it
handles the remainder: truncate, discarding the remainder, use
the remainder to round to the closed decisecond value, or use any
non-zero remainder to the next larger whole decisecond value. Bug
discovered by Librae.
- TCP: In the TCP connection operation, it was trying to setup the
network monitor BEFORE the socket was successfully connected. This,
of course, has ALWAYS failed because the socket is not yet connected
and the TCP state is not yet correct for a connected socket. However,
because of other changes net_startmonitor() now returns a failure
condition that causes worse problems when trying to connect. The fix
is to move the logic that starts the network monitor to AFTER the
socket has been successfully connected.
* Atmel SAM3/4 Drivers:
- SAM4CM and SAMA5D Free-running timer: Logic that samples the free
running counter reads the pending interrupt status register and can
cause interrupts to be lost. So, if when the status register is
read, the logic must also handle the timer overflow event. Found
and fixed by Max Neklyudov.
* Atmel SAMA5 Drivers:
- SAM3/4 Serial: When reconfigured, serial does not receive bytes
from UART. This happens because RX interrupt was disabled in the
setup routine. Fixed this I save interrupt configuration before
UART shutdown and restore it after. From Max Neklyudov.
* NXP LPC17xx Drivers:
- LPC176x GPIO: Reorder steps when an output GPIO is configured in
order to avoid transient bad values from being output. From Hal
Glenn.
- LPC17 USB OHCI: Correct some initialization of data structures.
When hub support is enabled, it would overwrite the end of an array
and clobber some OS data structures.
- LPC17xx Ethernet: Review, update, and modify the Ethernet driver so
that it works better with CONFIG_NET_NOINTS=y. Also, update all
LPC17xx networking configurations so that they have
CONFIG_NET_NOTINTS=y selected.
* SiLabs EMF32 Drivers:
- EFM32 SPI: Add missing SPI GPIO pin initialization. From Pierre-noel
Bouteville.
* STMicro STM32:
- STM32 F3: Added missing EXTI definitions for the STM32 F3; Correct
an error the port D base address in the STM32 F30x and F37x memory
maps. From Greg Meiste.
* STMicro STM32 Drivers:
- STM23 RTC: Fix an error introduced into stm32_pwr_enablebkp().
That function must preserve the previous state of backup domain
access on return.
- STM32 RTC counter: Now need to enable backup domain write access
when setting the time. From Darcy Gong.
- STM32 OTG FS and HS: Added protection in the event that out-of-bound
endpoint numbers are received. From David Sidrane.
* STMicro STM32 Boards:
- STM32F429i Disco: (1) Fix a bad return value if the LCD driver is
already initialized. (2) The LCD driver initialization is now
performed during the early boot sequence. (3) Increased the size
of the message queue from 32 to 64 in the lcd configuration. From
Marco Krahl.
* TI Tiva
- Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
* Atmel SAMV71 Drivers:
- SAMV7 TWIHS: Fix SAMV TWIHS logic that performs multi-message
transfers with and without repeated starts.
* Atmel SAMA5D3/4 Dirvers:
- SAMA5 CAN: Fix SAMA5 CAN frame construction. From Max Holtzberg.
* C Library/Header Files:
- stdlib.h: MAX_RAND should be RAND_MAX.
- assert.h: Wrap definitions of assertion macros in do while so that
they are valid C statements. Numerous places throughout the code
where semicolons were missing at the end of an assertion also had to
be fixed. Suggested by orbitalfox.
- inetntoa(): Correct errors in printing IP address when type char is
signed and the value is >= 128. From Max Neklyudov.
* Tools:
- Tools: Fix test for the existence of the apps/ directory in
configure.c. Fix backward interpretation of options, -l was selecting
Windows and -w was selecting Linux. This was SourceForege Ticket #39.
* Applications: apps/nshlib:
- apps/nshlib/nsh_timcmds.c: Check return values from time functions.
- apps/nshlib/: Fix handling of gmtime_r return value in time commands.
gmtime_r returns a pointer, not an int.
* Applications: apps/netutils:
- apps/netutils/ntp: Fix mismatched sched_lock/unlock. Noted by Juha
Niskanen.
* Applications: apps/examples:
- apps/examples/nxlines: Fix missing right bracket that causes
compile error when CONFIG_NX_XYINPUT=y. From Librae.
- apps/examples: When boardctl() fails, need to print errno not the
returned value which will always be -1.
- apps/examples: Correct use of the BOARDIOC_GRAPHICS_SETUP boardctl()
call.
NuttX-7.11 Release Notes
------------------------
The 111th release of NuttX, Version 7.11, was made on August 13 2015,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.11.tar.gz and
apps-7.11.tar.gz. These are available from:
https://bitbucket.org/patacongo/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- clock_gettime(): Use up_timer_gettime for CLOCK_MONOTONIC in
tickless mode. From Max Neklyudov.
- waitpid(): Implement WNOHANG for waitpid() only and for the case of
CONFIG_SCHED_HAVE_PARENT not selected. From Max Neklyudov.
- SCHED_SPORADIC: Add a sporadic scheduler to NuttX.
- Extend the processor-specific interface to include information to
support the Sporadic Scheduler.
- sem_tickwait(): Added this function for internal use within the OS.
It is a non-standard but more efficient version of sem_timedwait()
for use in higher performance device drivers.
* Binary Loader:
* Graphics/Graphic Drivers:
- Graphics: Implement anti-aliasing in order to clean the drawing of
all edges. Anti-aliasing is supported in the horizontal, raster
direction only.
- SSD1306 LCD Driver: Modify the SSD1306 LCD driver to support either
the SPI or I2C interface. From Alan Carvalho de Assis.
* File Systems/Block Drivers/MTD:
- mount: Add the ability to mount a file system on top of en existing
node in the psuedo-file system.
- epoll(): Add a very simple epoll layer just around poll calls. To
satisfy build app requirements. From Anton D. Kachalov.
* Common Device Drivers:
- IOCTL: Add relay IOCTL definitions. From Max Neklyudov.
- I/O Expander Framework: Add an I/O expander driver framework. From
Sebastien Lorquet
- NXP PCA9555 I/O Explander. Add PCA9555 driver.From Sebastien
Lorquet
- BMP180 Barameter: Add support to Bosch BMP180 barometer. From
Alan Carvalho de Assis.
- CAN IOCTLs: Add CAN IOCTL command definitions to manage CAN message
filtering
- CAN Driver: Add configuration to support DLC to byte conversions
needed for CAN FD mode.
- SPI Slave Interface: Add a definition of an SPI slave interface.
- LM92 Temperature Sensor: Add a driver for the LM92 temperature
sensor. Contributed by Paul Alexander Patience.
- AS5048B Rotary Magnetic Sensor: Add support for an AS5048B rotary
magnetic sensor. From Paul Alexander Patience.
- Ramtron Driver: Update to include supportf for newer RAMTRON parts.
From David Sidrane.
- MB7040 Sonar Driver: Add support for a MB7040 sonar driver. From
Paul Alexander Patience.
- ms5805 Altimeter Driver: Add support for an MS5805 altimeter. From
Paul Alexander Patience.
* Networking:
- DNS Client: Implement the low-level network DNS packet protocol to
request and receive IPv6 address mappings.
- NetDB: Add support for a DNS host name resolution cache. This can
save a lot of DNS name server lookups (but might also have the
negative consequence of using stale IP address mappings.
- NetDB: Name resolution logic now supports lookups from a file like
/etc/hosts.
- Network Initialization: Add CONFIG_NETDEV_LATEINIT that can be
used to suppress calls to up_netinitialize() from early in
initialization.
- FTMAC100 Ethernet MAC Driver. Add support for Faraday FTMCA100
Ethernet MAC/ From Anton D. Kachalov.
- UDP Networking: Add support for send() for connected UDP sockets.
* Crypto:
- Add CFB and MAC AES modes. From Max Neklyudov.
* Simulation Platform:
- Simulation: Implement board_power_off() for the simulation platform.
This allows for a graceful exit from the simulation.
* MoxaRT:
- MoxaRT SoC: Add support for MoxaRT SoC found in the most Moxa serial
converters such as NP51x0, NP66xx, UC72xx. From Anton D. Kachalov.
* MoxaRT Boards:
- Moxa NP51x0: Moxa NP51x0 series of 2-port advanced RS-232/422/485
serial device servers. From Anton D. Kachalov.
* ARMv6-M:
- ARMv6-M Assertions: Port some per-process stack dumping logic from
ARMv7-M to ARMv6-M. From Alan Carvalho de Assis.
* Atmel SAMD/L Boards:
- SAML21: DMA: Add SAML21 DMA support.
- SAMD21: Add architecture support for the SAMD21 family.
- SAMD21-Xplained: Board configuration for the SAMD21 Xplained board.
* Atmel SAM3/4 Drivers:
- SAM4E: Add default loop optimization if EEFC_FMR is available in the
configuration (i.e., for SAM4S and 4E). From Marco Aur<75>lio da Cruz.
- crypto/ and SAM4CM: Add CFB and MAC AES modes. From Max Neklyudov.
- SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
* Freescale (NXP) Kinetis:
- Kinetis: Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed
for backward compatible support for Teensy-3.0.
* Freescale (NXP) Kinetis Boards:
- Teensy 3.x: Add board support for the PJRC Teensy-3.0 and
Teensy-3.1 boards.
* Atmel SAMV7 Drivers:
- SAMV7: Add an MCAN driver for the SAMV7 platform.
- SAMV7 SPI Slave Driver: Add the an SPI slave driver.
* STMicro STM32:
- STMicro STM32 F7: Add architecture support for the STMicro STM32
F7.
- STM32 F446: Add support for the STMicro STM32 F446. From David
Sidrane.
* STMicro STM32 Drivers:
- STM32 F7: Add an STM32 F7 Ethernet driver.
- STM32 F7: Port the STM32 F4 DMA driver.
- STM32 F4 ADC: Add DMA support to the ADC driver for STM32 F4. From
Max Kriegler.
* STMicro STM32 Boards:
- STM32F762G-Disco: Add support for the STMicro STM32 F7 Discovery
board.
- STM32F4-Disco: Add support to BMP180 driver on the STM32F4 Discovery.
From Alan Carvalho de Assis.
* C Library/Header Files:
- Add asctime(), asctime_r(), ctime(), and ctime_r().
- sethostname(): Add support for sethostname().
- gethostbyname() and gethostbyaddr(): Add support for
gethostbyname() and gethostbyaddr(). Also support included for the
non-standard gethostbyname_r() and gethostbyaddr_r(). This moves
the DNS client logic from apps/ into the NuttX libc implementation.
* Tools:
- testbuild.sh: Add a script that can be used to perform building
testing for several board configurations.
* Build/Configuration System:
- apps/ Build System: No longer depends on hardcoded lists of
directories. Instead, it does a wildcard search to find all
appropriate directories. This means that to install a new
application, you simply have to copy the directory (or link it) into
the apps/ directory. If the new directory includes a Makefile and
Make.defs file, then it will automatically be included in the build.
- mkkonfig.sh: Add the tool mkkconfig.sh that dynamically builds the
apps/Kconfig file at configuration time. The hardcoded
configuration file has been removed and now the top-level Makefile
executes tools/mkkconfig.sh to auto-generate the top-level Kconfig
file. A new apps/ make target call preconfig: was added to support
this operation. Now you do not have to modify the top-level Kconfig
file to add a new directory into the configuration; the top-level
subdirectory simply needs to include a Kconfig file and it will
automatically be included in the configuration. The native Windows
build is temporarily broken until a new apps/tools/mkconfig.bat
script is generated.
- mkkconfig.bat: Add the Windows script corresponding to
apps/tools/mkkconfig.sh. Needed for a Windows native build.
* Applications: apps/nshlib:
- NSH shutdown command: NSH will now support an (optional) shutdown
command if the board provides the option CONFIG_BOARDCTL_POWEROFF.
The command can also be used to reset the system if
CONFIG_BOARDCTL_RESET=y.
- NSH uname command: Add support for a uname command.
- NSH nslookup command: Add an nslookup command.
* Applications: apps/system:
- NetDB: Add a system command to access the network database.
- readline(): Add support for Unix-style tab complete to readline.
Contributed by Nghia Ho.
- readline(): Extended the tab-completion support to also expand NSH
command names.
- readline(): Add support for an in-memory command line history that
can be retrieved using the up and down arrows. Contributed by Nghia
Ho.
* Applications: apps/netutils:
- DNS client: Moved the DNS client logic into the NuttX C library.
It is a necessary part for the full implementation of the netdb logic
and provides more flexibility in that location.
- Replace calls to the non-standard dns_gethotip() with calls to
standard gethostbyname().
- NetLib: Create netlib wrapper functions around dns_getserver() and
dns_setserver() to isolate application code from changes to those
interfaces.
* Applications: apps/examples:
- OS test: Extend the OS test to include a test of
pthread_mutex_trylock() for recursive mutexes. From Juha Niskanen.
- OS test: Add a test for the sporadic scheduler.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- pthreads: Use -1 instead of 0 as PID for unclaimed mutexes. From
Juha Niskanen.
- pthreads: Implement pthread_mutex_trylock() for recursive mutexes.
From Juha Niskanen.
- pthread_create(): Group binding needs to be cleared before
sched_releasetcb(), as otherwise group_leave() will be called and
group->tg_nmembers decremented or group being released. group_leave()
should be called only after group_join() is called, not after
group_bind(). From Jussi Kivilinna.
- Protected Mode User Memory Allocator: Redesigned how the user space
heap is accessed from the kernel code in protected mode. It used to
call memory management functions in user space via function pointers
in the userspace interface. That is inefficient because the first
thing that those memory management functions do is to trap back into
the kernel to get the current PID. Worse, that operation can be
fatal is certain fragile situations such as when a task is exiting.
The solution is to remove all of the memory management function
calls from the interface. Instead, the interface exports the users
pace heap structure and then kernel size implementations of those
memory management functions will operate on the userspace heap
structure. This avoids the unnecessary system calls and, more
importantly, failures do to freeing memory when a test exits.
- pthread_create(): Fix an (unlikely) error in fallback value in the
event of a failure (which should never occur).
* Common Drivers:
- STMPE811 Driver: In stmpe811_instanciate() when
CONFIG_STMPE811_MULTIPLE is enabled, and the call to
stmpe811_checkid() fails, then the linked device list is not
restored to its previous state. From Sebastien Lorquet.
- CAN driver: Fix an issue in the CAN driver where the rx_sem count
can grow beyond bounds.
* File System/Block Drivers:
- NFS client: Fix prototype of unbind method. The function prototype
was not updated for NFS after a recent change to the file system
interface. From Manuel St??.
* Networking/Network Drivers:
- netconfig.h: Fix some backward compilation that was emitting #error
in the wrong condition when SLIP was enabled.
- SLIP Driver: Fix a missed name change when many of network
interface names changed sometime back but were apparently never
updated for SLIP.
- Networking: Allow receipt of empty UDP packets. From Max Neklyudov.
* ARMv6-M:
- ARMv6-M: Fix Cortex-M0 assembly error when the interrupt stack is
enabled. From Alan Carvalho de Assis.
* Atmel SAMD/L Drivers:
- SAMD20, D21, L21: In the SAML21, SERCOM5 uses a different SLOW clock
channel (and, hence, also a different SLOW GCLK generator). This
means that the channel selection cannot be a global definition but
must be a per SERCOM configuration setting.
- SAMD/L: Several fixes to register definitions and types. From
Janne Rosberg.
* Atmel SAM3/4 Drivers:
- SAM3/4 UART: Back out an error introduced with commit
02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in
up_lowputc(). From Max Neklyudov.
- SAM4CM: Fix SUPC register definitions. From Max Neklyudov.
- SAM3/4 WDT: Correct some problems with SAM3/4 watchdog driver.
Includes some small improvements. From Max Neklyudov.
* Atmel SAMV7 Drivers:
- SAMV7 UART: Also back the bad cloned change o sam_lowputc.c for
SAMV7 platform.
* NXP LPC43xx Drivers:
- LPC4350: Correct some LPC4350 GPIO pin configurations. From
Alessandro Temil.
* SiLabs EMF32 Drivers:
- EFM32 SPI: Correct write to incorrect register in EFM32 SPI driver.
From Pierre-noel Bouteville.
* STMicro STM32 Drivers:
- STM32 F15x: STM322 F15x stm32_stdclockconfig() was calling
stm32_pw_setvos() which accessed PWR_CR via an inactive APB From
Juha Niskaneni.
- STM32 Ethernet: Extend STM32 Ethernet operating frequency to 180MHz.
From Sebastien Lorquet.
* STMicro STM32 Boards:
- SAMV7 Xplained: In clock configuration, divider was set to 25 to get
25*12MHz=300MHz CPU clock. The correct multiplier is 24 because the
calculation if (24+1)*12MHz. So the board was running at 312MHz.
From Efim Monjak.
* ARMv7-A:
- Cortex-A5 vfork(): Fix a Cortex-A compilation error when system
calls are enabled in modes other than CONFIG_BUILD_KERNEL.
* Atmel SAMA5 Drivers:
- SAMA5Dx EHCI: Fix some bad conditional compilation that left a
function undefined if CONFIG_USBHOST_ASYNCH is not selected.
* C Library/Header Files:
- getopt(): Uninitialized variable can cause hardfault from getopt()
if required argument is missing. From George McWilliams.
* Applications: apps/nshlib:
- NSH/THHPD: Change decoding to handle the increased size of the
scheduling policy field in the TCB.
* Applications: apps/netutils:
- THTTPD: Fix compilation problems when
CONFIG_THTTPD_GENERATE_INDICES is defined.
- THTTPD: Missing gci-src as a dependency path when building with
BINFS enabled.
* Applications: apps/examples:
- poll() example: Fix a few bit-rot compilation errors.
- Nx Lines example: If CONFIG_NX_ANTIALIASING=y, then the nxlines
example now erases a line that is 2 pixels longer and 2 pixels wider
than the line it drew. That eliminates edges effects due to
applying the anti-aliasing algorithm twice. A better solution
would be to make anti-aliasing an option for each graphics call so
you would rend the line with anti-aliasing ON and clear it with
anti-aliasing OFF. but I don't have the wherewithal for that change
today.
- OS test: Improve synchronization in round robin tests. On very fast
processors, there are race conditions that make the test fail.
Need better interlocking to assure that the threads actually do start
at the same time.
NuttX-7.12 Release Notes
------------------------
The 112th release of NuttX, Version 7.12, was made on October 1, 2015,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.12.tar.gz and
apps-7.12.tar.gz. These are available from:
https://bitbucket.org/patacongo/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Graphics/Graphic Drivers:
- Added SSD1351 OLED controller support. Contributed by Paul
Alexander Patience.
* Common Device Drivers:
- MS58xx: Generalize the MS5805 altimeter driver to support other
family members. From Paul Alexander Patience.
- CAN driver interface: Add an error indication bit to the CAN
message report.
- Developed a new interface for QSPI. Most QSPI hardware (such as the
SAMV71) used a programmed interface to access the QuadSPI FLASH.
That programmed interface is no compatible with the simpler NuttX
SPI data transfer interface.
- Added a driver for ST25L1*K QuadSPI parts.
- Renamed the battery driver interface to battery_gauge since it
really only implements a battery fuel gauge. From Alan Carvalho de
Assis.
- Added a new framework to support a batter charger interface. From
Alan Carvalho de Assis.
- Added a BQ24250 battery charger driver. From Alan Carvalho de Assis.
* Networking:
- Added support for the local loopback device (dev lo, hostname localhost).
- Added NetDB support for the local loopback device.
- Network initialization: Automatically initialize all the TUN and
loopback devices if they arein the configuration.
* Simulation Platform:
- The simulation now runs under Cygwin64. Modern Cygwin X86_64
machines follow the Microsoft ABI for parameter passing. The Linux
System 5 ABI would not work on X86_64-based Cygwin machines. Newer
Cygwin tool chains do nor pre-pend symbol names with the underscore
character.
* Atmel SAMA5Dx:
- Added architectural support for the Atmel SAMA5D2 parts. Not fully
verified in this NuttX release.
* Atmel SAMA5Dx Boards:
- Added support for the Atmel SAMA45D2 Xplained Ultra board. Not
fully verified in this NuttX release.
* Atmel SAMV7 Drivers:
- SAMV7 USBHS DCD: The device controller driver is (finally)
functional.
* NXP LPC17xx:
- Implement options to use external SDRAM and or SRAM for the heap.
From Pavel Pisa.
* NXP LPC43x:
- Added architectural support for the LPC4370. From Lok Tep.
* NXP LPC43xx Drivers:
- Added Ethernet support. From Ilya Averyanov.
- Added LPC43xx EHCI driver from Ilya Averyanov.
* NXP LPC43xx Drivers:
- Added support for the NXP LPC4370-Link2 development board from Lok
Tep.
* STMicro STM32:
- Added architectural for STM32F303K6, STM32F303K8, STM32F303C6,
STM32F303C8, STM32F303RD, and STM32F303RE devices. From Paul
Alexander Patience.
* STMicro STM32 Drivers:
- Added OTG support for STM32F44x. From David Sidrane.
* STMicro STM32 Boards:
- Added support for the STMicro Nucleo F303ERE board from Paul
Alexander Patience.
* C Library/Header Files:
- stdlib: Add support for div() to the C library. From OrbitalFox.
Also added ldiv() and lldiv() which are equivalent to div() with
long and long long types, respectively, instead of int.
- Added an implementation of the standard shutdown function.
* Tools:
- tools/mksymtab: declare g_symtab array as const to occupy RO section
(Flash). From Pavel Pisa.
* Build/Configuration System:
- Simplify configs/ Makefiles by combining common logic into a new
Board.mk Makefile fragment. From Paul Alexander Patience.
* Applications: apps/system:
- apps/system/symtab: Optional canned symtab inclusion to the build.
When option CONFIG_SYSTEM_SYMTAB is selected and symbol table file
libc/symtab/canned_symtab.inc is prepared then application can use
system provided complete symbol table. The option has substantial
effect on system image size. Mainly code/text. If loading of
applications at runtime is not planned do not select this. From
Pavel Pisa.
* Applications: apps/canutils:
- apps/canutils/uavcan: Add support for libuavcan. From Paul Alexander Patience.
* Applications: apps/examples:
- apps/examples/can: Extend the CAN loopback test by adding more
command line options.
- apps/examples/usbserial: Can now be run as an NSH builtin-function.
Now uses a configurable IO buffer size.
- apps/examples/nettest: Add option to suppress network initialization.
This is necessary if the nettest is run from NSH which has already
initialized the network.
- apps/examples/nettest: Extend test so that can be performed using
the local loopback device.
- apps/examples/netloop: Add a test of the local loopback device.
- apps/examples/udpblaster: Add a test to stress the network by
sending UDP packets at a very high rate. .
- apps/examples/uavcan: libuavcan example from Paul Alexander Patience.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- wd_create(): Correct a counting error in the number of available
watchdog timers. When the number of free timers is low, the counter
could be incremented below zero.
- mq_open(): When message queue is opened, inode_reserve() leaves the
reference count at zero. mq_open() logic must assure that the
reference count of the newly created inode is one.
- work_queue(): Logic that sets the queued indication and the logic
that does the actual queuing must be atomic.
* Binary Loader:
- Fix a memory leak in the built-in application logic: File was not
being closed. From Bruno Herrera.
* File System/Block Drivers:
- poll(): If we fail to setup the poll for any file descriptor, for
any reason, set the POLLERR bit.
- rwbuffer: Fix some logic errors. From Dmitry Nikolaev via Juha
Niskanen.
- ROMFS: One allocation was not being freed if there was a subsequent
failure to allocation I/O buffers resulting in a memory leak on
certain error conditions. From Bruno Herrera.
* Networking/Network Drivers:
- Fix a bug in tun interface driver. From Max Neklyudov.
- recvfrom(): Correct wait for new data when NET_UDP_READAHEAD is
enabled. Fix size accounting when recvfrom_udpreadahead() sets
state.rf_recvlen == -1. I have not checked if data are accumulated
to the right position in the buffer however. From Pavel Pisa.
- networking: Correct return value from psock_tcp_accept(). From
SaeHie Park.
- TCP: Fix a problem in when there are multiple network devices.
Polls were being sent to all TCP sockets before. This is not good
because it means that packets may sometimes be sent out on the wrong
device. That is inefficient because it will cause retransmissions
and bad performance. But, worse, when one of the devices is not
Ethernet, it will have a different MSS and, as a result, incorrect
data transfers can cause crashes. The fix is to lock into a single
device once the MSS is locked locked down.
- net/tcp: The logic that binds a specific network device to a
connection was faulty for the case of multiple network devices. On
bind(), the local address should be used to associate a device with
the connection (if the local address is not INADDR_ANY); On connect(),
the remote address should be used (in case the local address is
INADDR_ANY). On accept(), it does not matter but the remote address
is the one guaranteed to be available.
- net/tcp: Fix unbuffered send compilation error when Ethernet is not
enabled. From Alan Cavalho de Assis.
* ARMv7-M:
- All ARMV7-M IRQ setup: Always set the NVIC vector table address
unconditionally. This is needed in cases where the code is running
with a bootload and when the code is running from RAM. It is also
needed by the logic of up_ramvec_initialize() which gets the vector
base address from the NVIC. Suggested by Pavel Pisa.
- Fix some H/W floating point logic: In the original implementation,
!defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine
if lazy floating point register saving was being used. But recents
changes added common lazy register as well so now that test must be
(!defined(CONFIG_ARMV7M_CMNVECTOR) || defined(CONFIG_ARMV7M_LAZYFPU)).
- ARMv7-M, all "lazy" interrupt stack logic. Assembly instruction
that fetches the saved value is incorrect; replace with more
traditional push and pop. This is an important fix. Noted by
Stefan Kolb.
- All ARMV7-M: Force 8-byte stack alignment when calling from assembly
to C to interrupt handling.
- up_schedulesigaction(): Fix logic that determines if there is a
pending signal action before scheduling the next signal action.
Both the test and the scheduling action need to be atomic. This
problem was fixed on the ARMv7-M but also ported to other
architectures that had the same issue.
* NXP LPC43xx:
- LPC43xx: Fix NVIC_SYSH_PRIORITY_STEP define. From Ilya Averyanov.
- LPC43xx: Fix missing #define in eeprom. From Ilya Averyanov.
* NXP LPC43xx Drivers:
- Fixed the SPI driver. From Ilya Averyanov.
* Atmel SAMA5 Drivers:
- LPC31 and SAMA5D EHCI: Fix qh_ioccheck to move bp to next QH. From
Ilya Averyanov.
- LPC31 and SAMA5D EHCI: Performance improvement: Do not disable the
asynchronous queue when adding a new QH structure. From Ilya
Averyanov.
* C Library/Header Files:
- gethostbyname(): correct returned address format when DNS is used.
The hostent.h_addr_list should point to raw in_addr or in6_addr
as defined in the standard. Original implementation used that for
numeric addresses but for DNS lookup returned pointer to whole
sockaddr_in or sockaddr_in6. From Pavel Pisa .
- asin(): The function did not convert for some input values. asing()
did not convert for values which do not belong to the domain of the
function. But aside of that the function also did not converge for
allowed values. I achieved a conversion of the function by
reducing the DBL_EPSION and by checking if the input value is in
the domain of the function. This is a fix for the problem but the
function should always terminate after a given number of iterations.
From Stefan Kolb.
- Change all references from avsprintf to vasprintf. From Sebastien
Lorquet.
* Applications: apps/nshlib:
- Fix error handling in 'cat' command. On a failure to allocate
memory, a file was not being closed. From Bruno Herrera.
- Fix error handling in 'mv' command. On a failure to expand the
second path, the memory allocated for the expansion of the first
path was not being freed. From Bruno Herrera.
* Applications: apps/system:
- apps/system/netdb: Failed to build if CONFIG_NET_HOSTFILE was not
defined because gethostbyaddr() was not available. Noted by
OrbitalFox.
* Applications: apps/netutils:
- Various Kconfig files in netutils: Fix some changes from from
NETUTILS_DNSCLIENT to NETDB_DNSCLIENT. From Pavel Pisa.
* Applications: apps/modbus:
- Macros PR_BEGIN_EXTERN_C and PR_END_EXTERN_C were not defined in
all contexts. Replace with explicit expansion in all cases. From Stefan Kolb.
NuttX-7.13 Release Notes
------------------------
The 113th release of NuttX, Version 7.13, was made on December 5, 2015,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.13.tar.gz and
apps-7.13.tar.gz. These are available from:
https://bitbucket.org/patacongo/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- External RTC: Added OS support for external RTC chips.
- boardctl(): Add a command to the boardctl() interface to obtain a
board unique ID.
* File Systems:
- TMPFS: Add support for a new TMPFS, RAM file system. The TMPFS
file system does not require any significant amount of memory
itself. It will grow dynamically as files are added and shrink back
when files are deleted. A very low overhead way to retain temporary
files.
- VFS: The VFS was extended to support standard file operations on
block drivers (open, close, read, write, etc.). The open() interface
accomplishes this by creating a temporary characer driver to mediate
the character oriented accesses to tje block driver.
- HOSTFS: Added a HOSTFS file system for use with the simulator. The
HOSTFS file system mounts in the simulated Nuttx context by provides
proxied access to the file system on the host PC. This is useful for
providing file system content and nonvolatile storage of files in the
simulation environment. From Ken Pettit.
- MTD/PROCFS: Add an interface to un-register an MTD procfs entry.
From Ken Pettit.
- filemtd: A new MTD conversion layer that will convert a regular file
(or driver file) to an MTD device. This is useful for testing on the
simulation using the HOSTFS. From Ken Pettit.
- PROCFS: Extended to include networking entries in the procfs. Device
status, device statistics, and network statistics are now available
from the PROCFS.
- PROCFS: The PROCFS file system can now be configured so that it
supports runtime registration of PROCFS entries with
CONFIG_FS_PROCFS_REGISTER=y.
* Graphics/Graphic Drivers:
- ST7565 Driver: Extend to include support for the ERC12864-3. From
Pierre-noel Bouteville.
* Common Device Drivers:
- User buttons: Added a character driver to support application access
to board buttons. Supports notification of button activity via
signals.
- User LEDs: Added a character driver to support application access
to on-board LEDs.
- Zero Cross: Added a Zero Cross device driver support. From Alan
Carvalho de Assis.
- MAX6675: Added support to Thermocouple-to-Digital converter MAX6675.
From Alan Carvalho de Assis.
- BCH: Block-to-character (BCH) driver should forward ioctl() calls
to the contained block driver.
- S25FL1xx: Added a S25FL1xx QuadSPI FLASH driver.
- On-Chip FLASH: Added an upper half MTD device that can use the
interfaces defined in included/nuttx/progmem.h to provide a
standard MTD driver.
- Serial: Implemented high level DMA infrastructure for serial
devices. From Max Neklyudov.
- AT24XX: Add support for multiple AT24xx EEPROM parts, each with
unique I2C addresses, but otherwise identical.
- External RTC: Added drivers for external I2C RTC chips: DS3102,
DS1307, DS3231, DS3232, and NXP PCF85263.
- W25: Added support for byte write mode to the W25 FLASH driver. From
Ken Pettit.
- dev/loop: Added a loop character device. losetup() and loteardown()
should not be called directory from applications. Rather, these
functions are now available as IOCTL commands to the loop driver.
- dev/smart: Added support for a /dev/smart loop device. From Ken
Pettit.
* Networking:
- Driver Statistics: Most network drivers do not support statistics.
Those that do only supported them when DEBUG is enabled. Each
driver collected an architecture specific set of statistics and
there was no common mechanism to view those statistics. Thus,
the driver feature was mostly useless. This release standardizes
the driver statistics and puts the definition in the common network
device structure defined in netdev.h where they can be accessed by
network applications. All Ethernet drivers that collect statistics
have been adapted to use these common statistics.
* Simulation Platform:
- W25 FLASH: Added support for W25 FLASH simulation. From Ken Pettit.
- HOSTFS: Added support for the HOSTFS file system (see "File Systems",
above).
* Atmel SAMV7:
- SAME70: Added support for the SAME70 family of chips.
- Tickless: SAMV7 now supports the tickless mode of operation.
* Atmel SAMV7 Drivers:
- MPU: Added MPU and protected build support.
- QSPI: Added a QuadSPI FLASH driver. This driver operates in the
memory-mapped, Serial Memory Mode (SMM).
- FLASH: Added support to write on-chip FLASH.
- Timer/Counter: TC driver ported to SAMV7 from the SAMA5. Free-running
and one-short timer logic also ported.
- PCK: Brought programmable clock (PCK) logic from SAMA5 into SAMV7.
- Timer/Counter: Support PCK6 as an optional source for the timer/
counter clock.
* Atmel SAMV7 Boards:
- SAME70-Xplained: Add NSH and networking configurations for the
SAME70 Xplained board. Includes verified support for serial console,
LEDs, buttons, SDRAM, HSMCI SD card, and networking.
- SAMV7-XULT and SAME70-Xplained: If Tickless mode is selected then
enable PCK6 as a timer/counter clock source
* STMicro STM32:
- CCM PROCFS: Is no longer a part of the 'base' procfs entries and can
now only be supported via run time registration with
CONFIG_FS_PROCFS_REGISTER=y.
* STMicro STM32 Drivers:
- Timers: Add a compatible lower-half timer driver for use with the
common timer upper-half driver. From Wail Khemir.
* STMicro STM32 Boards:
- STM32F4-Discovery: Add low level support for the Zero Cross driver
for the STM32F4-Discovery. From Alan Carvalho de Assis.
- STM32F4-Discovery: Add board config to support for the MAX6675. From
Alan Carvalho de Assis.
* C Library/Header Files:
- bsearch(): Added the bsearch() function from NetBSD.
- freopen(): Added support for freopen().
- strftime(): Added day-of-week support (when avaialable).
* Tools:
- nxstyle: Add crappy style checking tool nxstyle.c. See thee tools/
README file for more info.
* Applications: NSH
- mksmartfs command: Add configuration option to supported multiple
rootdirectories. From Ken Pettit.
- Add support for 'basename' and 'dirname' commands.
- set command: Like bash, NSH set command now strips off any leading
or trailing whitespace.
- mount command: The mount commands now accepts mount options
(currently needed only for the hostfs file system). From Ken
Pettit.
- losetup command: NSH no longer calls losetup() and loteardown
directly. Now it opens /dev/loop and accomplishes these things
using ioctl() calls.
- ifconfig command: If CONFIG_NETDEV_STATISTICS=y, then print the
network driver statistics in the ifconfig.
- ifconfig, ifup, and ifdown: These commands now uses /proc/net/<dev>
to view network device configuration and status and /proc/net/stat
to show network statistics. A consequence of this is that you
cannot view this network information if the procfs is not enabled
and mounted at /proc.
- losmart command: Added a new NSH losmart command. losmart setups
up a loop device for the smart MTD driver similar to losetup but
with different syntax. From Ken Pettit.
- ps command: The 'ps' command now uses /proc/<pid>/ to obtain task
status information. A consequence of this is that you cannot use
the 'ps' command if the procfs is not enabled and mounted at /proc.
* Applications: apps/system:
- apps/system/hexed: Port the hexed command line hexadeciamal editor
to Nuttx. See http://apps.venomdev.net/hexed/.
* Applications: apps/fsutils:
- apps/fsutils/smartfs: Move into apps/fsutils from kernel, now uses
only open and ioctl. From Ken Pettit.
* Applications: apps/examples:
- apps/examples/fstest: Add a generic file system test. This is
essentially the same as examples/smart, but has all of the SmartFS
specific logic ripped out. This was created for testing the new
TMPFS.
- apps/examples/zerocross: Add a Zero Cross application example. From
Alan Carvalho de Assis.
- apps/examples/media: Add a simple test for access of media via a
block driver or MTD driver.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- Fixed an error in clock_timespec_subtract(). Found by Lok.
- pthreads: CRITICAL BUGFIX: Logic was wiping out the indication that
of the type of a pthread. Hence, it could be confused as a task.
Found because this was causing a crash when /proc/nnn/cmdline was
printed.
* File System/Block Drivers:
- SMART MTD: Fix some Smart wear-leveling bugs. Fixed SmartFS wear
level error that occurs when the logical sector size is too small to
save all wear level status bytes in a single sector. Logical
sectors 1 and 2 were simply not being allocated and then the
read_sector and write_sector routines were failing. From Ken
Pettit.
* Graphics/Graphic Drivers:
- ILI9432: Fixed errors in orientation. Portrait, RPortrait, and
Landscript should work correly now. They were displayed mirrored.
From Marco Krahl.
* Common Drivers:
- CAN: Fix a problem in the CAN upper-half driver that occurs only
for CAN hardware that support a H/W FIFO of outgoing CAN messages.
In this case, there can be a hang condition if both the H/W and
S/W FIFOs are both full. In that case, there may be no event to
awaken the upper half driver. Add a new (conditional) CAN upper
half interface called can_txready() that can be used by the lower
half driver to avoid this hang condition.
- MS58xx: Fix some issues with initialization and with CRC
calculation. From Karim Keddam.
- W25: Fixed W25 FLASH driver page read/write logic. From Ken Pettit.
* Atmel SAMV7 Drivers:
- USART1 pin configuration: Reconfigure System I/O when using USART1.
From Frank Benkert.
- MCAN: Added a call to can_txready() to the MCAN driver.
* STMicro STM32 Drivers:
- stm32 F4: Fix some TIM12 pin mappings. From Max Kriegleder.
* STMicro STM32 Boards:
- STM32F429i-Disco: Calculated partition boundries based on page
block sizes but mtd_partition() is expecting calculations based on
erase block size. From Alan Carvalho de Assis.
* C Library/Header Files:
- sys/types.h: When building on a 64-bit machine, the size of size_t
should be 64-bits. In general, I believe that sizeof(size_t) should
be the same as sizeof(uinptr_t). mmsize_t should always be 32-bits
in any event. The last change to stddef has been backed out. With
these changes, the simulator builds without errors or warnings an a
64-bit machine.
* Applications: apps/nshlib:
- The I/O buffer, g_iobuffer, should not be a global buffer. That
will not work in an environment where there are multiple NSH
sessions. The I/O buffer must, instead, be a part part of the
session-specific data defined in nsh_console.h.
NuttX-7.14 Release Notes
------------------------
The 114th release of NuttX, Version 7.14, was made on January 28, 2016,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.14.tar.gz and
apps-7.14.tar.gz. These are available from:
https://bitbucket.org/patacongo/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- modules: Add support for kernel modules: insmod, rmmod, support
functions. procfs support for user lsmod functioniality.
- SIGEV_THREAD: Add support for the SIGEV_THREAD notification method
in struct sigevent. This initial implementation will only work in
the FLAT build since it utilizes the work queue for signal
callbacks. See the top-level TODO file for additional details.
- 64-Bit Timer: If the 64-bit timer is selected, then use it whenever
clock_systimer() is called rather then chopping the 64-bit timer
down to 32-bits. Add a new type, systime_t to represent the 32- or
64-bit system timer. This eliminates clock_systimer32() and
clock_systime64(); there is now only clock_systimer().
* Common Device Drivers:
- Telnet Driver: Move the Telnet driver from apps/ to
nuttx/drivers/net. It is a driver a belongs in the OS. Now works
like the loop device: A new interface called telnet_initialize()
registers a telnet session "factory" device at /dev/telnet. Via
ioctl, the factory device can create instances of the telnet
character devices at /dev/telnetN to support Telnet sessions.
- PCA9635PW: Add a driver for the PCA9635PW I2C LED driver IC which
can be used to control the intensity of up to 16 LEDs. From
Alexander Entinger.
- MCP9844: Driver for the MCP9844 I2C digital temperature sensor with
a selectable resolution. From Alexander Entinger.
- PN532: Add driver for the NXP PN532 NFC-chip. From Janne Rosberg
and others at Offcode Ltd.
- LSM9DS1: Add driver for the STMicro LSM9DS1 chip. The LSM9DS1 is a
system-in-package featuring a 3D digital linear acceleration sensor,
a 3D digital angular rate sensor, and a 3D digital magnetic sensor.
From Paul Alexander Patience.
- CAN Interface: Add more extensive error reporting capaibility to
the CAN interface definitions. From Frank Benkert.
- SPI Interface: Add an optional hwfeatures() method to the SPI
interface.
* Simulation Platform:
- NSH configuration uses the custom start up scriptwith a read-only
passwd file. Includes hooks for an MOTD message.
* ARMv7-R
- ARMv7-R: Add basic architecture support for the ARMv7-R processor
family.
* Atmel AVR:
- Atmega2560: Add support for the Atmega2560. From Dimitry Kloper.
- debug.h: Add an AVR-specific header file used when the AVR MEMX
pointer is used. From Dimitri Kloper.
* Atmel AVR Boards:
- Arduino-Mega2560: Add support for the Arduino-Mega2560. From
Dimitry Koper.
* Atmel SAMV7 Drivers:
- Port the TRNG driver from the SAMA5D3/4 to the SAMV7.
- Port the WDT driver from the SAMA5D3/4 to the SAMV7.
- Add an RSWDT driver.
* Atmel SAMV7 Boards:
- SAMV71-XULT: Add configuration for testing OS modules.
* Freescale Kinetis:
- MK60N512VLL100: Add support for the MK60N512VLL100 Kinetis part.
From Andrew Webster.
* Freescale Kinetis Boards:
- ENET: Numerous updates to the Kinetis ENET driver. That driver is
now functional. From Andrew Webster.
* NXP LPC43xx Boards:
- WaveShare LPC4337-WS: Support for the WaveShare LPC4337-WS board.
From Lok Tep.
* STMicro STM32 Drivers:
- Timer Capture: Add timer input capture driver. From Pierre-Noel
Bouteville.
* STMicro STM32 Boards:
- Olimex STM32 H407: Added a port to the Olimex STM32 H407 board.
This board features the STMicro STM32F407ZGT6 (144 pins).
Contributed by Neil Hancock.
* TI TMS550 Boards:
- TI LaunchXL-TMS57004: Add basic board support for TI LaunchXL-
TMS57004. Still a work in progress.
* C Library/Header Files:
- sys/time.h: Add timeradd(), timersub(), timerclear(), timerisset(),
and timercmp() as macros. These are non-POSIX interfaces, but
included in most BSD deriviatives, including Linux. From Manuel St??.
- AVR support: Introduce support for Atmel toolchain in-flash strings.
Atmel toolchain AVR compiler provides a transparent in-flash object
support using __flash and __memx symbols. The former indicates to
compiler that this is a flash-based object. The later used with
pointer indicates that the referenced object may reside either in
flash or in RAM. The compiler automatically makes 32-bit pointer
with flag indicating whether referenced object is in flash or RAM
and generates code to access either in run-time. Thus, any function
hat accepts __memx object can transparently work with RAM and flash
objects.
For platforms with a Harvard architecture and a very small RAM like
AVR this allows to move all constant strings used in trace messages
to flash in the instruction address space, releasing resources for
other things. This change introduces IOBJ and IPTR type qualifiers.
The 'I' indicates that the object may lie in instruction space on a
Harvard architecture machine. For platforms that do not have __flash
and __memx or similar symbols IOBJ and IPTR are empty, making the
types equivalent to, for example, 'const char' and 'const char*'.
For Atmel compiler these will become 'const __flash char' and
'const __memx char*'. All printf() functions and syslog() functions
are changed so that the qualifier is used with the format parameter.
From Dimitry Kloper.
- debug.h: Add configuration to support an architecture-specific
debug.h header file. From Dimitri Kloper.
- netdb: Add support for the use of a DNS resolver file like
/etc/resolv.conf.
- TEA: Add an implementation of the Tiny Encryption Algorithm.
- math32.h: Add some utilities to support 64-bit arithmetic
operations for platforms that do not support long long types.
* Tools:
- tools/cnvwindeps.c: Add a tool that will convert paths in
dependencies generated by a Windows compiler so that they can be
used with the Cygwin make.
- tools/mkwindeps.sh: A script that coordinates use of cnvwindeps.exe.
Dependencies now work on the Cygwin platform when using a Windows
ative toolchain.
* Applications: NSH
- Module Commands: Add module commands: insmod, rmmod, and lsmod.
- Time Command: Add a 'time' command that may be used to time the
execution of other commands.
- Password Commands: Add useradd, userdel, and passwd commands.
- MOTD: Now supports a Message of the Day (MOTD) that will be
presented after the NSH greeting.
- Session Logins: All sessions may be protected with logins using the
encrypted password in /etc/passwd.
- Extended Logins. Added optional platform-specific function to
perform password verification and optional delay after each failed
login attempt.
* Applications: apps/fsutils:
- apps/fsutils/passwd: Utility library for accessing a password file
like /etc/passwd.
* Applications: apps/netutils:
- apps/netutils/telnetd: Now creates Telnet sessions by opening a new
factory device at /dev/telnet and then using ioctl calls to create
the session character drivers at /dev/telnetN.
- apps/netutils/netlib: Add netlib_get_dripv4addr() and
netlib_get_ipv4netmask(). From Pelle Windestam.
* Applications: apps/examples:
- apps/examples/module: Add a test harness for verifying NuttX kernel
modules.
- apps/examples/pca9635: Add a simple test of PCA9635PW PWM LED driver.
From Alan Carvalho de Assis.
- apps/examples/ostest: Add a test of POSIX timers using SIGEV_THREAD.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- pthreads: CRITICAL BUGFIX: Logic was wiping out the indication that
of the type of a pthread. Hence, it could be confused as a task.
- waitpid: CRITICAL BUGFIX. Add a reference count to prevent waitpid
from using stale memory released by the waited-for task group.
- clock_systimespec(): Fix an error in a time conversion.
* File System/Block Drivers:
- poll(): Fix handling of sem_tickwait() return value sem_tickwait()
does not return an -1+errno, it returns a negated errno value.
Noted by Freddie Chopin.
* Common Drivers:
- TUN Driver: Fix a compile time error in the TUN driver. From
Vladimir Komendantskiy.
- USB Host HID Parser: Wrong size used in memcpy(). From Hang Xu.
- PCA9555: Fixed a bug in the function pca9555_setbit which occurs if
someone tries to set one of the pins 8-15. The problem is that
after the check if the pin is greater than 7 the variable addr is
incremented and used in the Call I2C_WRITEREAD. But later in the
call to the I2C_WRITE buf[0] is used as address but this address is
not incremented as it should be. Note address does mean the address
to the register in the ioexpander and not the I2C address. From
Stefan Kolb.
* Networking:
- TCP/IOB: Numerous fixes, mostly relate to TCP and IOB buffering
and race conditions. These were necessary for for the NuttX
networking later to be stable in some stress testing. From Andrew
Webster.
* Atmel SAMV7 Drivers:
- USBHS Device: In USBHS device driver, fix check if zero length
packet is needed.
* STMicro STM32 Drivers:
- OTG FS Host: Fix some backward arguments to stm32_putreg(). Note
by Hang Xu.
* Tools:
- tools/mkdeps.c: Extended/fixed support for --winpath option.
Dependencies now work under Cygwin with a native Windows toolchain.
* Build System:
- apps/platform/Makefile: Use a relative path to the board directory
link rather than the absolute path. For Cygwin, the absolute would
would need converted with cygpath. But just using the relative path
is a simpler solution.
NuttX-7.15 Release Notes
------------------------
The 115th release of NuttX, Version 7.15, was made on March 27, 2016,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.15.tar.gz and
apps-7.15.tar.gz. These are available from:
https://bitbucket.org/patacongo/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- Add a state variable that provides the current level of OS
initialization. This is needed by some logic that may attempt to
run early in the start-up sequence but cannot run if a sufficient
level of initialization has not yet occurred.
- Spinlocks: Add interface definitions for to support spinlocks as
needed for multi-CPU configurations.
- SMP support. Support for Symmetric Multi-Processing (SMP) added.
This affects many internal data structures, spinlock extensions
and renaming of interrupt enable/disable interfaces, new platform
interfaces to support CPU initialization and inter-actions, and
new application interfaces to manage CPU affinity. The changes
are too extensive to summarize here; see the SMP Wiki page at
http://www.nuttx.org/doku.php?id=wiki:nxinternal:smp. The
new platform interfaces are also described in the NuttX porting
guide: http://www.nuttx.org/doku.php?id=documentation:portingguide.
Only partially verified; awaiting hardware for the complete
verification.
- TLS: Basic definitions needed to support thread local storage
(TLS). TLS is not used anywhere yet (and may not be used in the
near future either).
- Performance Monitoring: Add a configuration option to buffer
RTOS instrumentation data in an in-memory buffer.
- boardctl(): Add boardctl() support that will permit applications
to control USB devices.
* File Systems/Block Drivers:
- procfs: Add /proc/kmm entry that shows that state of the kernel
heap. Only useful in PROTECTED and KERNEL build modes where there
is a kernel heap.
- procfs: Add support for showing CPU in the tast status if SMP is
enabled.
* Networking:
- ARP: Add support for IOCTL commands to manage the ARP table.
- IEEE 802.15.4 and 6LowPAN: There are some radio drivers and a
directory structure is in place. However, most of this
development is occurring on a fork and is not yet available in the
NuttX repositories. Hopefully in NuttX-7.16.
* Common Device Drivers:
- ADS1242: Driver for the 24-Bit Differential Input ADC ADS1242 that
communicates via SPI with a MCU. Reading the ADC conversion result
as well as configuring the ADC, setting the input channel, etc. is
implemented via ioctl calls. However, it does not yet implement
the standard ADC interface. From Alexander Entinger.
- U-Blox Modem: Add an upper half driver for the U-Blox Modem. From
Vladimir Komendantskiy.
- I2C: Add an I2C, "upper half", character drivers to support raw I2C
data transfers for test applications.
- RGB LED: Add a driver to manage a RGB LED via PWM. From Alan
Carvalho de Assis.
- Performance Monitoring: Add a character driver that will allow an
application to read buffered scheduler instrumentation data.
* Simulation Platform:
- SMP: Add multi-CPU support to the simulation to support SMP
investigation. There are issues with the simulation and it is less
than perfect but sufficient for some very preliminary testing of
the core SMP feature.
* ARMv7-A, ARMv7-R, and ARMv7-M:
- ARMv7-A, ARMv7-R, and ARMv7-M: Add test-and-set logic and
definitions needed to supports spinlocks.
- ARMv7-A: Added MPCOre Generic Interrupt Controller (GICv2) and
Global Timer support
- ARMv7-A: Now includes in MCU-specific hooks needed for SMP support.
* Atmel SAMV7 Drivers:
- HSMSI: HSMCI driver can now be configured to handle unaligned data
buffers.
* NXP Freescale LPC11xx/17xx/43xx and LPC2378 Drivers:
- I2C: Backported the LPC43XX I2C driver, replacing the LPC11XX,
LPC17XX, and LPC2378 I2C drivers. This gives us the I2C_TRANSFER
method in all I2C drivers.
* NXP Freescale LPC17xx Boards:
- Support for the u-blox GSM and GPS module evaluation board with
NXP LPCExpresso LPC1768. The GSM module is one of LISA-C200,
LISA-U200 or SARA-G350. The GPS module is one of MAX-M7 or
MAX-M8. From Vladimir Komendantskiy.
* NXP Freescale i.MX6:
- Basic support is in place for the i.MX6 Quad/Dual MCUs.
Verification is, however, waiting for the receipt of hardware.
* NXP Freescale i.MX6 Boards:
- Sabre-6Quad: Basic support for the NXP/Freescale Sabre 6Quad
board is in place but waiting for hardware for verification.
* STMicro STM32:
- STM32F46xx: Support for STM32F46xx from Paul Alexander Patience
- STM32L4: Add support for the STM32L4 family. From Sebastien
Lorquet.
* STMicro STM32 Boards:
- STM32F4 Discovery: Add PWM support for the onboard RGB LED. From
Alan Carvalho de Assis.
- Nucleo-L476: Add support for the Nucleo-L476 board. From Sebastien
Lorquet.
- STM32L476VG Discovery: Add support for the STM32L476VG Discovery
board. From Dave.
* Tools:
- tools/refesh.sh now has a --silent option so that it can be used in
batch modes without human input.
* Build System:
- Added a 'make olddefconfig' target that will refresh a .config file
without interaction.
* Applications: NSH
- 'arp': Add an 'arp' command that will support access to the OS ARP
table.
- 'ps': The 'ps' command will show CPU if SMP is enabled.
* Applications: apps/netutils:
- apps/netutils/chat: Chat logic contributed by Vladimir
Komendantskiy.
- apps/netutils/netlib: Add utility functions to support accesses to
the ARP table.
* Applications: apps/examples:
- apps/examples/chat: Chat example contributed by Vladimir
Komendantskiy.
- apps/sysem/ubloxmodem: Example to control the power
state of the modem in nsh. From Vladimir Komendantskiy.
- apps/examples/leds: An example to demonstrate use of LED driver.
- apps/examples/smp: Add a test to verify SMP configurations.
- apps/examples/rgbled: Example using the RGB LED driver to drive an
RGB LED via PWM. From Alan Carvalho de Assis.
- apps/examples/ostest: Add a test of TLS.
- apps/examples/sched_note: Add a simple example to exercise the
scheduler instrumentation logic.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- Signals: Move the list of signal actions from the TCB to the group
structure. Signal handlers are not per thread but, rather, per task
group. I know, I preferred it the other way too, but this is more
compliant with POSIX.
- Semaphores: Add an internal, non-standard interface to reset a
semaphore count. This is sometimes needed by drivers in order to
recover from error conditions. Were previously using sem_init()
which is both inappropriate and incorrect if the semaphore count is
negative.
- Low-Priority Work Queue: Fix logic to find an IDLE worker thread;
the test for busy was backward. From Linfei Chen.
* File System/Block Drivers:
- FAT: Add an option to force all transfers to be performed
indirectly using the FAT file system's internal sector buffers.
This is a fix for the case where the user provided buffers are not
properly aligned for DMA (as with THTTPD).
- MTD: Increase block size in mtd_geometry_s to 32-bits.
* Common Drivers:
- I2C: Restructured the I2C interface as necessary to eliminate some
thread-safety issues inherent in the legacy I2C interface design.
This effects the interface definition, all I2C clients, and all low-
level I2C drivers. I have used caution, but I still expect a change
of this magnitude to introduce some errors. Any bug reports of bug
fixes will be much appreciated.
- I2C_RESET: Eliminate up_i2creset(). It should not be a global
function; Now it is an I2C interface method.
- PCA555: Add logic to make the PCA555 driver thread safe.
- syslog: If syslog timestamping is enabled, don't try to get the time
if the timer hardware has not yet been initialized.
- AT24xx driver: Correct missing address calculation logic. From Frank
Benkert.
* Networking:
- Networking drivers that support CONFIG_NET_NOINTS: Fix a race
condition that can cause the TX poll timer to stop running. From
Manuel Stuhn.
- Timer Poll: Fix some logic when there are multiple network
interfaces. In this case, TCP timeout events can really only being
processed when the poll from the correct device is received.
* Atmel SAMV7 Drivers:
- SAMV7 USB HS device: The USB driver has had some issue that would
occasionally cause loss of packets. Back last December, a fix was
put in for this but the fix apparently worsens the problem; now
causing hangs. The basic problem is that the number of busy banks
(NBUSYBKS) status is not real time but is delayed. This was fixed;
now when the DMA completes and NBUSYBKS > 0, the NBUSYBK is
interrupt is enabled and the operations are deferred until NBUSYBKS
is truly zero.
* Tools:
- tools/testbuild.sh: .config files were not being updated because
(a) kconfig-conf was being called in the wrong directory and (b)
apps/Kconfig had not yet been created. Now uses 'make
olddefconfig'.
* Applications: apps/system:
- apps/system/i2c: The I2C tool now obeys it OS interfacing: it now
uses an I2C character driver to access the I2C bus.
- apps/system/cdcacm, usbmsc, and composite: Use new boardctl()
instead of calling directly in the OS when possible.
* Applications: apps/netutils:
- apps/netutils/dhcpd: DHCPD no longer calls directly into the OS but
uses the new network IOCTL commands to modify the ARP table.
* Applications: apps/modbus:
- apps/modbus/nuttx/portserial.c: Was not returning an error on
failure to open the device driver. From Olololshka kokoko.
* Applications: apps/examples:
- apps/examples/usbserial, composite, usbterm: Use new boardctl()
instead of calling directly in the OS when possible. There are
still a few bad OS calls for USB device interfaces that do not yet
have boardctl() commands.
* Applications: apps/platform:
- Moved C++ initialization logic out of the RTOS and into the
application space, specifically to apps/platform/board, where it
belongs.
NuttX-7.16 Release Notes
------------------------
The 116th release of NuttX, Version 7.16, was made on June 1, 2016,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.16.tar.gz and
apps-7.16.tar.gz. These are available from:
https://bitbucket.org/nuttx/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- Power Management: Add activity domain to all PM interfaces and
driver callbacks. If CONFIG_PM_NDOMAINS == 1, then the legacy
behavior is preserved. If CONFIG_PM_NDOMAINS > 1, then multiple
PM domains are supported. This will allow separate control for
certain power management groups. For example, a network can be
shut down without affect an ongoing UI (and vice versa).
- board_app_initialize(): board_app_initialize() now accepts an
argument that may be used to support initialization in different
configurations.
* File System and Block and MTD Drivers:
- N25Qxxx: Add MTD support for Micron N25Qxxx family of QSPI flash.
From Dave (ziggurat29).
- SST26F: Add an MTD driver for SST26F spi/qspi flash devices (SPI
mode only). From Sebastien Lorquet.
- File Descriptor Detach: Add logic to detach a file structure from a
file descriptor. This is for use only within the OS. It permits an
open file or driver to be used across multiple threads.
* Networking and Network Drivers:
- listen()/accept(): Separate out psock_listen() and psock_accepti()
for internal, thread independent OS usage (i.e., without a socket
descriptor).
- VNC Server: Add support for a VNC server. This logic is code
complete and functional, but not well tested.
* Graphics and Graphic Drivers:
- Framebuffer driver: Add a display number to each interface in order
to support multiple display devices.
- VNC Server: Add support for a VNC server. This logic is code
complete and functional, but not well tested.
- LCD Backpack: Add support for PCF8574 LCD Backpack driver. This
driver supports an interface board that is based on the PCF8574 I/O
expander and supports the HD44780-based (or compatible) LCD modules.
There are a myriad of different vendors of such, but they are
principally the same, save wiring and minor features like jumpers
for I2C addresses. This driver supports known and unknown variants.
From Dave (ziggurat29).
* Common Device Drivers:
- RTC: Simplify the RTC interface. The old interface was way too
complex and was not fully implemented anywhere.
- BH1750FVI: Add a character driver for Rohm Ambient Light Sensor
BH1750FVI. From Alan Carvalho de Assis.
- CAN: Improve CAN error reporting. From Frank Benkert.
- aes.h: Modifications to the crypto API needed for LPC43xx. From
Alexander Vasiljev.
- ADC: Interface no longer uses global adc_receive() call. Added a
new bind() method to the ADC interface. Now the ADC upper half
driver will register its receipt-of-data callback. This change
allows the ADC lower half driver to be used with a differ ADC upper
half.
* Simulation Platform:
- Linux Host Networking: Enhance networking support for the
simulation under Linux. Includes updated support for Linux TUN/TAP,
and the addition of support for Linux bridge devices. From Steve.
* ARMv7-A, ARMv7-R, and ARMv7-M:
- ARMv7-M: Convert more assembly language files for use with the IAR
toolchain. From Kha Vo.
- ARMv7-A: Complete re-design of SMP-related logic to initialize each
CPUn, n > 0, when CONFIG_SMP=y.
* Atmel SAMV7:
- Add a JTAG config and ERASE config to Kconfig to set the
CCFG_SYSIO SYSIO Pins. From David Sidrane.
- System Reset: Add the up_systemreset interface to the samv7 arch. The
approach is slightly different in that: 1) It enables ARCH_HAVE_RESET
and allows the user to set if, and for how long, to drive External
nRST signal. It also does not contain a default board_reset, as that
really should be done in the config's src if CONFIG_BOARDCTL_RESET
is defined. From David Sidrane.
* Atmel SAMV7 Boards:
- SAMV71-XULT: Add configuration(s) that were be used to verify VNC
graphics output as well as mouse and keyboard input.
* NXP Freescale i.MX6 Boards:
- Sabre-6Quad: The basic i.MX6 port is complete. This is a minimal
port at present and probably still has some as-of-yet-undiscovered
issues.
- Sabre-6Quad: Basic SMP NSH configuration is now working. But this
is probably only because the SMP test case does not stress the
logic. There are know outstanding SMP issues as noted in the
Sabre-6Quad README.txt file.
* NXP Freescale LPC43xx:
- LPC4337jet100: Add definitions for the LPC4337jet100 chip. From
Alexander Vasiljev.
* NXP Freescale LPC43xx Drivers:
- AES: Add AES support. From Alexander Vasiljev.
* STMicro STM32:
- STM32 L4: Add configuration options to allow SRAM2 to be used for
heap, or not at all, and to zero-initialize it on OS start, or not
at all. From Dave dev@ziggurat29.com.
- STM32 L4: Add support for HSE and MSI clocks, and auto trim of MSI
to LSE (needed for USB). From Dave (ziggurat29)
- STM32 L4: Add support for unique id function to arch; modified board
to support unique id boardctl. From Dave (ziggurat29)
* STMicro STM32 Drivers:
- STM32 F4 RTC: Add a custom RTC driver with support for alarms. From
Neil Hancock.
- STM32 L4 QSPI: Add a QSPI driver with DMA support and (optional
memory mapped mode support. From Dave ziggurat29).
- STM32, STM32 L4, and STM32 F7 Serial: Add support for compliant
SD-style breaks. From David Sidrane.
- STM32 L4 CAN: Add CAN support for STM32L4. From Sebastien Lorquet.
- STM32 1-Wire: Add support for a custom 1-wire driver. The serial
driver already supports a 1-wire interface, but this driver uses the
same serial logic to implement a lower half driver much like the
I2C lower half driver. From Aleksandr Vyhovanec.
- STM32 L4 SPI: Add support for SPI 4 and 5 on stm32f411 chips. From
Konstantin Berezenko.
- STM32 ADC: Allow omitting use of channels in a lower part of PWM.
From Pierre-noel Bouteville.
- STM32 L4 I2C: Get I2C working for STM32L4. From Dave (ziggurat29).
* STMicro STM32 Boards:
- STM3220G-EVAL: Add support for both the IAR and uVision GCC IDEs.
From Kha Vo.
- STM32F429I Discovery: Add support for the uVision GCC IDE. From
Kha Vo.
- STM32F4 Discovery: Integrate BH1750FVI driver in the STM32F4 Discovery
board. From Alan Carvalho de Assis.
- STM32L476VG Discovery: Add support for QSPI based N25Qxxx flash.
From Dave (ziggurat29)
- STM32L476VG Discovery: Add board ioctls for allowing user application
to cause QSPI memory mapped mode to be engaged and disengaged. Also
partitioned QSPI flash for file system and other (eventually xip).
From Dave (ziggurat29)
- Nucleo-144: Basic port for the Nucleo-144 board with the STM32F746ZG
MCU. From Kconstantin Berezenko.
- STM32F103 Minimum: Add support for this minimual STM32F103CBT6 "blue"
board. From Alan Carvalho de Assis.
- STM32F411E Discovery: Add basic configuration for stm32f411e-disco
board with STM32F411VE chip. From Konstantin Berezenko.
* Build/Configuration System:
- Moved NuttX repository to https://bitbucket.org/nuttx/nuttx.
Eliminated use of sub-modules.
- Add support for the IAR toolchain for the limited case of the ARMv7-M
architecture and the STM32 chip. From Aleksandr Vyhovanec.
- make export: Pass top-level make to the script to allow -j greater
than 1. From David Sidrane.
- fs/Kconfig: Allow CONFIG_FS_WRITABLE to be manually selectable. This
is needed when there are no writable file systems, but write support
is still needed in BCH or FTL.
- arch/*/Makefile: Add definitions that can be overrided to use GCC
instead of LD in the final link. From Paul Alexander Patience .
* Applications: apps/netutils:
- apps/netutils/esp8266: ESP8266 driver application. From Pierre-noel
Bouteville.
* Applications: apps/examples:
- apps/examples/alarm: Add a simple test of the ALARM iotcl calls of
the RTC driver.
- apps/examples/nximage: Add a configuration option to select
greyscale.
* Platforms: apps/platform:
- apps/platform/nucleo-144: Add platform files for NUCLEO-144
(NUCLEO-F746ZG). From Mark Olsson.
- apps/examples/media: You can now override the default device driver
path by providing an alternal path on the command line. From
S<>bastien Lorquet.
Works-In-Progress:
* IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
introduced in NuttX-7.15. Work has continued on this effort on
forks from the main repositories, albeit with many interruptions.
The completion of this wireless feature will postponed until at
least NuttX-7.17.
* i.MX6 SMP. Partially functional, but there is more that still
needs to be done.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- Various places: Search for places where a stray semicolon following
an if condition cause the if body to be executed unconditionally.
Fixes in all SAM DMA logic, unionfs, OS signalling logic, and others.
- enter/leave_critical_section() may attempt to access task lists
before they have been initialized in the SMP configuration.
* File System/Block Drivers:
- SMART MTD: Return code of smart_scan not checked, can cause success
result in failure case, leading to 'dev' pointer being invalid. From
Dave (ziggurat29)
- mount: Fix a backward debug assertion. Noted by David Sidrane.
* Common Drivers:
- NRF24L01: Fix backward calculation of relative frequency. Noted by
Henry Zhang.
- PCA9555 I/O expander: Fix an error in the PCA9555 driver: Under
certain error conditions, interrupts were not being re-enabled.
Sebastien Lorquet.
- ADS1255: Must not do SPI access from interrupt handler. Use the
worker thread instead. Must also lock the SPI bus before using it.
- Several SPI-based drivers modified. All drivers that use SPI must
call SPI_LOCK and SPI_UNLOCK. This is not optional.
- MS583730: Fix a bug in crc computation for ms583730. Implement
POSIX read.
* Atmel SAMV7:
- Fix typo in MATRIX register definitions. From Stefan Kolb.
- SAMV7 Tickless Mode: This is a fix to a problem in the handling of
the oneshot timer. Due to a wrong assumption concerning the behavior
directly after the start of the timer/counter the function
sam_oneshot_cancel(<28>) calculates the wrong remaining time. The code
assumes that the counter register is zero directly after the start
of the timer, but this is not true. To start the time/counter a
software trigger is invoked, this trigger starts the timer/count and
sets the counter register to zero, but the reset of the counter
register is not performed instantly. According to the datasheet:
"The counter can be reset by a trigger. In this case, the counter
value passes to zero on the next valid edge of the selected clock."
Thus the counter is set to zero between 0 and USEC_PER_TICK
microseconds after the clock was started.
In my fix I use the freerun count value to determine if at least one
tick passed since the start of the timer and thus if the value of
the oneshot counter is correct. I also tried to use the function
up_timer_gettime(<28>) to achieve this but, at least if compiled with
no optimization the problem vanishes without using the value of the
function, the function call takes too long.
Another problem treated in the fix is that if the oneshot timer/counter
is canceled, we only know the remaining time with a precision of
USEC_PER_TICK microseconds. This means the calculated remaining time
is between 0 and USEC_PER_TICK microseconds too long. To fix this I
subtract one tick if the calculated remaining time is greater than
one tick and otherwise set the remaining time to zero. By doing so
the measured times are much more precise as without it. From Stefan
Kolb.
* Atmel SAMA5:
- SAMA5: Stefan Kolb's change to the SAMV7 Oneshot Timer should also
be applied to the SAMA5 oneshot time since the drivers are identical.
* Atmel SAM3/4:
- SAM3/4: Stefan Kolb's change to the SAMV7 Oneshot Timer should also
be applied to the SAM3/4 oneshot time since the drivers are identical.
* Atmel SAMV7 Drivers:
- SAMV7 TWIHS (as well as SAM3/4 and SAMA5: Ensure that the TWIHS
(i2c) hw get's its clock set when the sequence of
sam_i2cbus_initialize(), sam_i2cbus_uninitialize(), then
sam_i2cbus_initialize() or twi_reset() is called. I found this a
while back in the stm32 family, so there may be more arch-es with
this sort of bug. I suppose any driver that has the notion of "do
not set the freq if it is already set" could be suspect. From David
Sidrane.
- USBHS Device: Remove disabling of whole USB on suspend of USBHS.
This fix removes the disabling of the whole USB peripheral on
suspend interrupt. Its enough to freeze the clock instead. When
disabling the whole peripheral, the next wakeup-interrupt comes up
with an disabled clocking. The unfreeze clock has no effect, because
the master clock is disabled. This makes all registers, including
the IDR unwriteable and the IRQ falls in an endless loop blocking
the whole system. Furthermore the disabling of the peripheral clock
prevents hotplugging or reconnecting the USB. From Frank Benkert.
- MCAN: Fix missing unlock of device in MCAN mcan_txempty(). From
Frank Benkert.
* STMicro STM32:
- STM32 L4 Clocking: Problem with resetting backup domain clears
clocking options set up before in *rcc.c use INITS flag to avoid
magic reg value to detect power up reset state of RTC correct a
problem clearing interrupt flags (they weren't) which prevented an
alarm from ever being used more than once per reset cycle. From
Dave (ziggurat29)
* STMicro STM32 Drivers:
- STM32L4 SPI: That STM32Lr SPI driver is quite different. They now
handle frames of arbitrary size between 4 and 16 bits. It was broken
before a new bit has to be set (RX fifo threshold) to handle <= 8-bit
transactions. If not set, the default is 16-bit packed >=8-bit
frames and the RXNE bit is never set (it is set when 16-bits are
received). weird things as always. This also add 8-bit access
routines to the data register, because a 16-bit access to the data
register when the frame size is below 9 bits is interpreted as a
packed dual frame exchange. Sebastien Lorquet.
- STM32: Correct some bad commits that broke the LTDC display example.
From Marco Krahl.
- STM32 F4 RTC: Fix logic in F4 RTCC driver that prevent ALARM
interrupt. From Neil Hancock.
- STM32 F1 ADC: Fix STM32 ValueLine ADC IRQ number selection. From
David Sidrane.
* STMicro STM32 Boards:
- STM32F429I Discovery: Correct some bad commits that broke the LTDC
display example. From Marco Krahl.
* TI Tiva:
- GPIO Interrupts: Fix a bug of GPIO falling-edge interrupt for tiva.
From Young.
* C Library:
- math: Add a NAN test on 'x' in asin function of lib_asin.c. Suggested
by Pierre-noel Bouteville.
* Build/Configuration System:
- Several Makefiles: Add .PHONY definitions to prevent 'clean up to date'
message weirdness when 'make clean' is done with no .config or
Make.defs file.
NuttX-7.17 Release Notes
------------------------
The 117th release of NuttX, Version 7.17, was made on July 25, 2016,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.17.tar.gz and
apps-7.17.tar.gz. These are available from:
https://bitbucket.org/nuttx/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* File System and Block and MTD Drivers:
- drivers/mtd: Add a driver of IS25xP SPI flash devices. Based on
sst25xx driver. From Marten Svanfeldt.
* Networking and Network Drivers:
- Break out internal interface psock_ioctl().
* Common Device Drivers:
- PTYs: Added support for pseduo-terminals: Device drivers that can be
used for communications between tasks (usually with re-directed I/O).
Based on existing pipe logic.
- Button upper half driver: Added support for poll().
- CAN: Add support for poll. From Paul Alexander Patience.
- GPIO: Add support for a simple GPIO driver. It supports only pre-
configured input, output, and interrupting pins with basic input and
output operations. Interrupt events can lead to notification via a
signal.
- I/O Expander: Shadow-Mode: The output- and configuration registers of
the IO-Expander are held in the microcontrollers memory and only
written to the IO-Expander. This reduces bus traffic and is more
error-proof than the normal read-modify-write operation. Retry Mode:
If enabled and an error occurs while writing to the IO-Expander the
current transmission is automatically repeated once. From Michael
Spahlinger.
- Pipes/FIFOs: Add support to allocating different sizes for pipe and
fifo buffers. Adds mkfifo2() and pipe2() which are just like mkfifo()
and pipe(), but allow control of the size of the underlying, in-memory
circular buffer. Move pipe() and mkpipe() to the C library, they are
no longer core OS interfaces. Capability currenty used only by PTY
logic to support, configurable, smaller buffers for PTYs.
* SYSLOG/Debug Output:
- SYSLOG: Consolidated all SYSLOG logic in drivers/syslog. Added an
abstraction layer that supports: (1) redirection of SYSLOG outpout.
This is usually so that you can boot with one SYSLOG output but
transition to another SYSLOG output when the OS has initialialized,
(2) adds common serialization of interrupt output as a configuration
option. Without this configuration setting, interrupt level output
will be asynchronous. And (3) vsyslog is now a system call and is
usable with other-than-FLAT builds.
- SYSLOG: syslog() will now automatically redirect output to
lowsyslog() if called from an interrupt handler.
- Extended SYSLOG logic so that we can send SYSLOG output to a file.
- SYSLOG character device channel will now expand LF to CR-LF.
Controllable with a configuration option.
- Add a SYSLOG character device that can be used to re-direct output
to the SYSLOG channel (Not be be confused the SYSLGO output to a
character device).
- Debug features are now enabled separately from debug output.
(1) CONFIG_DEBUG is gone. It is replaced with CONFIG_DEBUG_FEATURES.
(2) The macros dbg() and vdbg() have renamed as _err() and _info(),
respectively. This also applies to all of the variants as well,
XXdbg() and XXvdbg(). (3) Add a new debug level, _warn() (and
all variants XXwarn(), XXvwarn(), etc.). (4) Debug assertions can
now be enabled separately from debug output. (5) You can now enable
subsystem/device driver debug output at different output levels. For
example, CONFIG_DEBUG_FS no longer enables file system debug output
It enables general file system debug logic and enables selection of
CONFIG_DEBUG_FS_ERROR, CONFIG_DEBUG_FS_WARN, and CONFIG_DEBUG_FS_INFO.
- Since the SYSLOG layer now automatically handles low-level vs.
high-level output, the low-level (ll) variants of the debug macros
were eliminated.
- Reviewed all uses of *err(). These macro family should indicate
only error conditions. Convert *err() to either *info() or add
ERROR:, depending on if an error is reported.
- _alert(): New debug macro: _alert(). This is high priority,
unconditional output and is used to simplify and standardize crash
error reporting.
- Many CONFIG_DEBUG_* options did not have matching macros defined in
include/debug.h. Rather, there were various definitions scattered
throughout the sourse tree. These were collected together and
centralized with single macro definitions in include/debug.h
* Simulation Platform:
- Added the simulated QSPI (N25Q) flash to the simulation and extened
flash simulation capabilities to run with MTD drivers based on config
options (currently m25p, sst26 and w25). From Ken Pettit.
* Atmel SAMV7 Drivers:
- SPI: SPI-Freq. 40MHz; VARSELECT; hw-features This change adds the
following improvements:
o Increase the allowed SPI-Frequency from 20 to 40 MHz.
o Correct and rename the "VARSELECT" option This option was
included in the code as "CONFIG_SPI_VARSELECT" but nowhere
defined in a Kconfig file. The change renames it to
"CONFIG_SAMV7_SPI_VARSELECT" and corrects the implementation
according the datasheet of Atmel. In short, this option
switches the processor from "fixed peripheral selection"
(single device) to "variable peripheral selection" (multiple
devices on the bus).
o Add a new Function to the interface to control the timing and
delays of the chip according the ChipSelect lines. This function
can control the delay between the assertion of the ChipSelect and
the first bit, between the last bit and the de-assertion of the
ChipSelect and between two ChipSelects. This is needed to tune
the transfer according the specification of the connected devices.
o Add three "hw-features" for the SAMV7, which controls the behavior
of the ChipSelect:
- force CS inactive after transfer: this forces a (short) de-
assertion of the CS after a transfer, even if more data is
available in time
- force CS active after transfer: this forces the CS to stay
active after a transfer, even if the chip runs out of data.
Btw.: this is a prerequisit to make the LASTXFER bit working
at all.
- escape LASTXFER: this suppresses the LASTXFER bit at the end
of the next transfer. The "escape"-Flag is reset automatically.
From Frank Benkert
- TWISHS: Driver improvements from Michael Spahlinger.
- GPIO-Driver fixed for Open-Drain Pins:
o sam_gpioread: Now the actual line level from the pin is read
back. This is extremely important for Open-Drain Pins, which
can be used bidirectionally
o Re-Implemented twi_reset-function and enhanced it so it can be
called from inside the driver (see next point)
o Glitch-Filter: Added a configuration option to enable the twi-
built-in glitch filter
o Added a "Single Master Mode": In EMC Testing the TWI-Bus got
stuck because the TWI-Master detected a Multi-Master access (but
there is no second master). With the option "Single Master" we
detect these events and automatically trigger a twi_reset. We
also do an automatic recovery if a slave got stuck (SDA stays
low).
With the above changes I<>C-Bus reliability in harsh environments (eg.
EMC) is greatly improved. The small change in the GPIO-Driver was
necessary because otherwise you cannot read back the correct line
status of Open-Drain Outputs and this is needed by the twi_reset
function. From Michael Spahlinger
* NXP Freescale LPC43xx Drivers:
- EMC: Extend LPC43xx EMC code to support SDRAM on a dynamic memory
interface. From Vytautas Lukenskas.
* NXP Freescale Kinetis:
- Kinetis K64: Add basic support for the K64 family. I leveraged the
changes from https://github.com/jmacintyre/nuttx-k64f and merged
into the existing kinetis code with a lot of changes and additions
(like pin multiplexing definitions).
* NXP Freescale Kinetis Drivers:
- Add a KinetisUSB device controller driver. Derived from the pic32mx
usb driver, which uses the same usb controller. From kfazz.
- Kinetis pwm support, based on the KL pwm driver. From kfazz.
- Kinetis Ethernet: Add support for the KSZ8081 PHY.
- Kinetis Ethernet: Modified Ethernet driver to try all PHY addresses
and then only fail if the driver cannot find a usable PHY address.
This means that you no longer have to specific the PHY address in
advance.
- Kinetis Ethernet: Add support for CONFIG_NET_NOINTS. The driver no
longer runs the networking at interrupt level but can defer interrupt
work to the high-priority work queue.
* NXP Freescale Kinetis Boards:
- Teensy-3.x: Add USB support and a usbnsh configuration.
From kfazz (2016-06).
- Freedom-K64F: Add support for the NXP Freedom-K64F board at 120MHz.
This is primarily the work of Jordan Macintyre. I leveraged this
code from https://github.com/jmacintyre/nuttx-k64f which was, itself,
a leverage from the old K60 TWR configuration. This includes
significant corrections (LEDs, buttons, README, etc) and extensions
and updates to match more recent BSPs.
- Freedom-K64F: Added a configuration that supports networking.
* STMicro STM32:
- STM32 F1-4: Added support for the STM32F105R. From Konstantin
Berezenko.
- STM32 F4: Added support for the STM32FF76xxx and STM32FF7xx
families. From David Sidrane.
- STM32 F1-4: Add support for Tickless mode (two timer
implementation). From Max Neklyudov.
- STM32 L4: Add support for tickless OS, and incidentally timers,
PWM, oneshot, free-running.... From ziggurat29.
* STMicro STM32 Drivers:
- STM32 F1-4: Add the up_getc() function to STM32 in order to support
the minnsh configuration. From Alan Carvalho de Assis.
- STM32 F7: Add SPI driver. From David Sidrane.
- STM32 F7: Add SPI, I2C, and ADC drivers. From Lok Tep.
- STM32 L4: Add ioctls to set/get CAN bit timing in stm32l4. Add
ioctl hooks to allow future management of can id filters. From
Sebastien Lorquet.
- STM32 L4: Add some CAN mode IOCTL calls. These will be useful for
device autotest when the application boots. They are redundant
with the CONFIG_CAN_LOOPBACK option, which can now just be
interpreted as a default setting. From Sebastien Lorquet.
- STM32 F1-4: Port STM32L4 CAN IOCTLs to STM32. From Sebastien Lorquet.
- STM32 L4: Implementation of loopback IOCTLs. From Sebastien
Lorquet.
- STM32 F7: Added SDMMC1 support for stm32F7 74-75. From Lok Tep.
- STM32 F7: Add USB support. From Lok Tep.
- STM32 F7: Added PWR, RTC, and BBSRAM support for stm32f7. From David
Sidrane.
- STM32 F7: Added STMF7xxx RTC. From David Sidrane.
- STM32 F7: Added STM32F7 DBGMCU. From David Sidrane.
- STM32 L4: Port support for both RX FIFOs from STM32 CAN. From Paul
Alexander Patience.
* STMicro STM32 Boards:
- Added a minnsh configuration for the STM32F103-Minimum board. From
Alan Carvalho de Assis .
- Added support for the Nucleo-F767ZI board. From David Sidrane.
- Nucleo-144/Nucleo-F767ZI: Add test for STM32 F7 SPI. From David
Sidrane.
- Nucleo-144: Added SDMMC support to Nucleo-144. From David Sidrane.
- Olimex STM32-E4077: Add support for Olimex STM32 E407 board. From
Mateusz Szafoni.
- Nucleo-144: Added USB OTG device to Nucleo-144. From David Sidrane.
- Nucleo-144: Added bbsram test to Nucleo-144. From David Sidrane.
- STM32F4 Disovery: add CAN support for STM32F4 Discovery. From
Matthias Renner.
- STM32F4 Disovery: added a canard configuration files. From
Matthias Renner.
- STM32F4 Discovery: Add FPU support for ostest for the STM32F4
Disovery platform. From David Alessio.
- STM32L476 Discovery: Update stm32l476 disco to include init code for
smartfs and nxffs for cases where those fs are included in build.
From ziggurat29.
* C Library/Header Files:
- include/assert.h: Check if NDEBUG is defined. From Paul Alexander
Patience.
- assert.h: Define static assert for C++ usage. From Paul Alexander
Patience.
- Add crc64 support. From Paul Alexander Patience.
- hex2bin: Move the portable library portion of apps/system/hex2bin
the C library with the OS internals. It is used in certain internal
boot-loader builds.
- Add raise().
- libm: This change should significantly improve the performance of
single precision floating point math library functions. The vast
majority of changes have to do with preventing the compiler from
needlessly promoting floats to doubles, performing the calculation
with doubles, only to demote the result to float. These changes only
affect the math lib functions that return float. From David Alessio.
- printf(): If there are no streams, let printf() fall back to use
syslog() for output.
- Move pipe() and mkpipe() to nuttx/libc, they are no
longer core OS interfaces. Capability currenty used only by PTY logi
to support, configurable, smaller buffers for PTYs.
- Move driver-related files from include/nuttx to include/nuttx/drivers.
Move driver related prototypes out of include/nuttx/fs/fs.h and into
new include/drivers/drivers.h.
- include /nuttx/lib: Move library-related files from include/nuttx to
include/nuttx/lib.
* Build/Configuration System:
- Custom Board Configuration: Add logic to support custom board
directories that include a Kconfig file. During the context phase
of the build, any Kconfig file in the custom board directory is
copied into configs/dummy, replacing the existing Kconfig file with
the target Kconfig file.
- Remove the includes/apps link to apps/include. It is no longer
used. From Sebastien Lorquet.
* Tools:
- tools/tesbuild.sh will now build NxWM configurations.
* Appplication Build/Configuration System:
- Change to the way that apps/ Kconfig files are generated in
order to better support reuse of the apps/ directory in NuttX
products. Changes include: Make the full tree use wildcards
make.defs, Add empty preconfig rules to 'leaf' makefiles, Use
directory.mk for recursive dir makefiles, Individual app kconfig
fixes, Recursive Kconfig autogeneration, Add kconfig files for
pcode and tiff, and fix a gitignore rule, From S<>bastien Lorquet.
- apps/include directory structure reorganized. There are no longer
any header files in the apps/include/. directory. Rather, sub-
directories were added to match the partitioning of apps/ sub-
directories and the header files were moved into the appropriate
sub-directory. This change is intended to help with some changes
being considered by S<>bastien Lorquet.
- Call all includes from <apps/bla/bla.h> to "bla/bla.h". From Sebastien
Lorquet.
- Add apps/include to include path in top-level Make.defs file.
* Applications: apps/nshlib:
- Make NSH net-initialization be a configuration option. From Marten
Svanfeld.
- Add NTP client initialization in NSH network startup logic. From
David S. Alessio .
- 'ps' command now prints out the stack usage if stack coloration is
enabled. From Frank Benkert.
- Allow stack usage to be disabled on constrained systems. From David
Sidrane.
* Applications: apps/netutils:
- NTP Client: Add retries. From David S. Alessio.
- NTP Client: The NTP client will now optionally use pool.ntp.org as
the NTP server; and reset the retry count upon success -- more robust.
From David Alessio.
- ESP8266: Add logic to set the BAUD rate. From Pierre-noel Bouteville.
- ESP8266: In Kconfig, select ARCH_HAVE_NET when NETUTILS_ESP8266 is
selected. This allows, among other things, support for network debug
output. From Pierre-noel Bouteville.
* Applications: apps/fsutils:
- flash_eraseall: IOCTL wrapper for MDCIO_BULKERASE command. Was in
nuttx/drivers/mtd. Moved to apps/fsutils because the call directly into
the OS was incorrect.
* Applications: apps/canutils:
- canlib: Basic CAN utility library. From Sebastien Lorquet.
* Platforms: apps/system:
- flash_eraseall: Now uses the IOCTL wrapper at apps/fsutils/flash_eraseall.
* Platforms: apps/platform:
- Add platform files for Olimex STM32 E407. From Mateusz Szafoni.
* Applications: apps/examples:
- apps/examples/canard: Add canard example application. From
Matthias Renner.
- apps/examples/pty_test: PTY test program. From Alan Carvalho de
Assis.
Works-In-Progress:
* IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
introduced in NuttX-7.15. Work has continued on this effort on
forks from the main repositories, albeit with many interruptions.
The completion of this wireless feature will postponed until at
least NuttX-7.18.
* i.MX6 SMP. Partially functional, but there is more that still
needs to be done.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- semaphores: Need to set errno to EINVAL on errors in sem_post()
and sem_wait(). From Paul Alexander Patience.
* File System/Block Drivers/MTD Drivers:
- Several MTD FLASH drivers nullify the freed 'priv' structure and
failed to return NULL as stated in the comments. Result, will
operate on a NULL pointer later. Noted by David Sidrane.
- VFS ioctl(). Per comments from David Sidrane, file_ioctl() should
not return succeed if the ioctl method is not supported. It
probably should return ENOTTY in that case.
- SST26 Driver: Before accessing the sst26 flash, the "Global Unlock"
command must me executed, which I do in the sst26 driver. BUT re-
reading the datasheet, the WREN instruction is required to enable
the execution of this command. This was not done. I have no idea how
the driver currently works except by chance. The writes should never
happen at all, the flash is half-enabled! From Sebastien Lorquet.
- N25Qxx Driver: Alter the notion of 'blocksize' to be equivalent to
'flash write page size' in order to align with assumptions in the
smartfs driver (at least, maybe other things do as well). Correct a
bug that was previously masked by having blocksize=eraseblocksize
which would cause buffer overflows and delicious hardfaults.
Trivial spelling changes in comments, etc. From ziggurat29.
- SmartFS: Fix a 32-byte memory leak. From Ken Pettit.
- SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256,
adds DEBUGASSERT for invalid geometry and additional memory debug
logic. Also fixes the dangling pointer on error bug. From Ken
Pettit.
* Common Drivers:
- USB CDC/ACM Device Class: cdcacm_unbind leaks write request objects.
This arises due to freeing the bulk IN endpoint before the loop
that frees the requests via cdcasm_freereq. That function checks
the parameters and skips the freeing if either is NULL. Freeing
the bulk IN enpoint will cause the first param to be NULL, thereby
bypassing the free operation. To fix, I moved the release of the
bulk IN endpoint until after to loop (much as was the case for the
OUT and read requests, which did not exhibit the problem). From
ziggurat29.
- Pipes and FIFOs: Add missing configuration for pipe ring buffer
size. From Frank Benkert.
- UART 16550: Handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not
enabled. From Heath Petersen.
- Common Serial Upper Half: Fix a race condition noted by Stefan
Kolb. Between the test if the TX buffer is full and entering a
critical section, bytes may be removed from the TX buffer making
the wait unnecessary. The unnecessary wait is an inefficiency,
but not really a problem. But with USB CDC/ACM it can be a problem
because the entire TX buffer may be emptied when we lose the race.
If that happens that uart_putxmitchar() can hang waiting for data
to be removed from an empty TX buffer.
- USB MSC Device Class: Add locks when removing request from queue.
From Wolfgang Reissnegger.
- USB MSC Device Class: Fix reversed logic on waiting for SCSI thread
start. The scsi thread was waiting for the wrong condition.
However, this was masked by the fact that the code creating the
scsi thread was also holding usbmsc_scsi_lock(priv) while
initializing data, hence this lock synchronized the scsi thread
start with init completion. From Wolfgang Reissnegger.
* Graphics and Graphic Drivers:
- Correct conditional compilation in ST7565 LCD driver. From Pierre-
noel Bouteville
* Networking:
- In both IPv6 and IPv4 incoming logic: (1) Should check if the
packet size is large enough before trying to access the packet
length in the IP header. (2) In the comparison between the IP
length and the full packet length, need to subtract the size of
he link layer header before making the comparison or we will get
false positives (i.e., the packet is really too small)
- TCP Networking: While working with version 7.10 I discovered a
problem in TCP stack that could be observed on high network load.
Generally speaking, the problem is that RST flag is set in
unnecessary case, in which between loss of some TCP packet and its
proper retransmission, another packets had been successfully sent.
The scenario is as follows: NuttX did not receive ACK for some sent
packet, so it has been probably lost somewhere. But before its
retransmission starts, NuttX is correctly issuing next TCP packets,
with sequence numbers increasing properly. When the retransmission
of previously lost packet finally succeeds, tcp_input receives the
accumulated ACK value, which acknowledges also the packets sent in
the meantime (i.e. between unsuccessful sending of lost packet and
its proper retransmission). However, variable unackseq is still set
to conn->isn + conn->sent, which is truth only if no further
packets transmission occurred in the meantime. Because of incorrect
(in such specific case) unackseq value, few lines further condition
if (ackseq <= unackseq)is not met, and, as a result, we are going to
reset label. From Jakub Lagwa.
* ARMv7-M:
- ARM stack check: Fix double fault on IDLE task with stack size = 0.
From David Sidrane.
* Atmel SAMV7 Drivers:
- CAN: CAN Message Filtering fixed: (1) stdfilters didn't work because
the filter was never enabled (wrong number of bits to shift), and
(2) Filters were never used because the configuration register
cannot be written without using the initialization mode. Both bugs
are fixed by this change. Filtering has been tested with both
standard and extended identifiers and is now working properly. From
Michael Spahlinger.
* Atmel SAMA5:
* Atmel SAM3/4 Drivers:
- Fix some errors in AFEC header file. From OrbitalFox.
- DAC: DACC_WPMR_WPKEY_MASK -> DACC_WPMR_WPKEY. From Wolfgang
Reissnegge.
- Timer: Fix ops check in TCIOC_STOP. From Wolfgang Reissnegge.
- I2C: Fix reversed logic in twi_startmessage(). From Wolfgang
Reissnegger.
- SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. This fixes
a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
* Atmel SAMV7 Drivers:
- USBHS Device: This change solves a problem which causes data loss
while sending data via USB. This problem is caused by an incorrect
handling of the endpoint state in the USB driver sam_usbdevhs. This
leads under some circumstances to situations in which an DMA
transfer is setup while a previous DMA transfer is currently active.
Amongst other things I introduced the new endpoint state
USBHS_EPSTATE_SENDING_DMA for the fix. To reproduce the problem, I
used a program which send as many data as possible via a CDC/ACM
device and verified the received data on the PC. From Stefan Kolb.
* NXP Freescale Kinetis Drivers:
- Timers: Support up to 8 channels per timer. From kfazz.
* NXP Freescale Kinetis Boards:
- Teensy 3.x clock fixes: The High Gain bit in MCG_C1 was preventing
teensy from booting except after a programming session. The second
change doesn't appear to change any functionality, but complies with
restrictions in the k20 family reference manual on FEI -> FBE clock
transiions. From kfazz.
* NXP Freescale LPC17xx Drivers:
- LPC17 Ethernet: Needs to correctly ignore PHYID2 revision number
when comparing PHY IDs.
* NXP Freescale LPC43xx Drivers:
- Fix errors in GPIO interrupt logic. From v01d (phreakuencies)
- Ethernet: Correct auto-negotiation mode in the LPC43xx Ethernet.
From Alexander Vasiljev
- Writing zero to NVIC_IRQ_ENABLE has no effect. Disable interrupts
with NVIC_IRQ_CLEAR. From Paul Alexander Patience.
- SPIFI: If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do
actual write (probably copy/paste errors). Still not sure about
current state of lpc43_spifi implementation, but for me NXFFS works
with this change. From Vytautas Lukenskas.
* Qemu-i486:
- Fix qemu-i486/ostest/Make.defs test for M32. From Heath Petersen.
* SiLabs EFM32 Drivers:
- Fix EFM32 FLASH conditional compilation. From Pierre-noel
Bouteville
- Writing zero to NVIC_IRQ_ENABLE has no effect. Disable interrupts
with NVIC_IRQ_CLEAR. From Paul Alexander Patience.
* STMicro STM32:
- STM32 F1-F4: In PWM driver, just update duty if frequency is not
changed and PSM started. This removeis glitch or blinking when
only duty is frequently changed. From Pierre-noel Bouteville.
* STMicro STM32 Drivers:
- STM32 F7: Fixed STM32F7 DMA stm32_dmacapable. DMA working on SDMMC.
From David Sidrane.
- STM32 F1-F4 Timer Driver: Change calculation of per- timer pre-scaler
value. Add support for all timers
- STM32 F1-F4: Correct conditional compilation in STM32 timer capture
logic. From Pierre-noel Bouteville
- STM32 F1-F4: Fix STM32 DMA code and configuration for STM32F37X chips.
From Marten Svanfeldt.
- STM32 F1-F4: Fix compilation errors in debug mode of stm32_pwm.c.
From Konstantin Berezenko.
- STM32 F1-F4: Correct the CAN2 RX IRQ number for stm32f10xx chips.
From Konstantin Berezenko.
- STM32 F1-F4: Move backup domain reset to to earlier in the
initialization sequence (stm32_rcc.c() in order to avoid disabling
LSE during RTC initialiation. From Alan Carvalho de Assis.
- STM32 F1-F4: When configuring a GPIO via stm32_configgpio() the
function will first set the mode to output and then set the initial
state of the gpio later on. If you have an application with an
externaly pulled-up pin, this would lead to a glitch on the line
that may be dangerous in some applications (e.G. Reset Line for
other chips, etc). This changes sets the output state before
configuring the pin as an output. From Pascal Speck .
- STM32 F7: Apply Pascal Speck's GPIO STM32 change to STM32 L4.
- STM32 L4: Apply Pascal Speck's GPIO STM32 change to STM32 L4.
From Sebastien Lorquet.
- STM32 F7: BUGFIX: PLLs IS2 and SAI P Calculation. From David
Sidrane.
- STM32 L4: STM32 CAN fixes need to be backported to STM32L4 as well.
- STM32 F1-F4 and L4: Writing zero to NVIC_IRQ_ENABLE has no effect.
Disable interrupts with NVIC_IRQ_CLEAR. From Paul Alexander
Patience.
- STM32 F7: STMF7xxx RTC: (1) Remove proxy #defines, (2) Ensure the
LSE(ON) etal are set and remembered in a) A cold start (RTC_MAGIC
invalid) of the RTC, and b) A warm start (RTC_MAGIC valid) of the
RTC but a clock change. The change was needed because in bench
testing a merge of the latest's STM32 53ec3ca (and friends) it
became apparent that the sequence of operation is wrong in the
reset of the Backup Domain in the RCC code. PWR is required before
the Backup Domain can be futzed with. !!!This Code should be tested
on STM32 and if needed rippled to the STM32 families. From David
Sidrane.
- STM32 F1-F4: STM32 BBSRAM fixed (and formatted) flags. From David
Sidrane.
- STM32 F7: STM32F7 BBSRAM fixed (and formatted) flags. From David
Sidrane.
- STM32 L4: Fix incorrect clock setup for LPTIM1. From ziggurat29.
- STM32 F4/L4 RTC ALARM: were enabling interrupts too early in the
power-up sequence, BEFORE the interrupt system was being
initialized.
* STMicro STM32 Boards:
- STM32 board.h: Fix STM32 timer input clock definitions. From David
Sidrane.
* TI Tiva Drivers:
- Bug Fix in tiva_serial.c - UART5, UART6 and UART7 were not being
configured as TTYS0 for printing over serial console. From Shirshak
Sengupta.
* C Library/Header Files:
- include/signal.h: Change type of SIG_ERR, SIG_IGN, ... to
_sa_handler_t. The type void does not work with the IAR toolchain.
From Aleksandr Vyhovanec.
- crc16: fix error. From Paul Alexander Patience.
- strtoul() and strtoull(): Fix errno settings required by function
definition. Resolved Bitbucket Issue #1. From Sebastien Lorquet.
* Build/Configuration System:
- Build system: This change fixes a build problem that only occurs
when reconfiguring from Linux to Windows or vice-versa. It is a
problem that was present but not usually experienced until two
things happened: (1) The pre_config target was added to run before
the menconfig operation and (2) the context target was added before
the pre_config target in order to set up the correct symbolic links
(in the apps/platform directory) needed by the pre_config target.
But then now if you start with a Linux system and run 'make
menuconfig' to switch to Linux, the context target will execute
first and set up POSIX style symbolic links before doing the
menuconfig. Then after the menuconfig, the make will fail on
Windows if you are using a Windows native toolchain because that
native toolchain cannot follow the Cygwin- style symbolic links.
The fix here is to also execute the clean_context AFTER executing
menuconfig. A lot more happens now: It used to be that doing
'make menuconfig' only did the menuconfig operation. Now it does
context, pre_config, menuconfig, clean_context. Not nearly as
snappy as it used to be.
- Need to build the drivers/ directory even it file descriptors are
not supported. There are things in the drivers/ directory that are
still needed (like SYSLOG logic).
- Remove all inclusion of header files from the apps/include
directory from NuttX core logic. There should be no dependency on
logic within NuttX on logic within apps/. This caused a lot of
reshuffling of logic: binfmt pcode support, usbmonitor is now a
kernel thread, TZ/Olson database moved to libc/zoneinfo.
* Application Build/Configuration System:
- Make sure that APPNAME is defined in all Makefiles that generate
applications. From Sebastien Lorquet.
* apps/builtins:
- apps/builtins: exec_builtin was not using the provided open flags.
As a result >> redirection was not working; it was treated the same
as >.
* apps/nshlib:
- apps/nshilib: PS Command: When Priority Inheritance is enabled, the
format of /proc/<PID>/status changes to show both the current
priority and the thread<61>s base priority. This messes up the format
of cmd_ps. From David Alessio.
* apps/netutils:
- apps/netutils, uIP webserver: Fix a data declaration in a header
file.
* apps/canutils:
- apps/canutils/libuavcan: Fix for recent change to STM32 timer
frequency definiitions.
* apps/examples:
- apps/examples/alarm: ioctl call was clobbering file descriptor.
- apps/examples/can: Some variables were not declared in all required
cases. From Sebastien Lorquet.
- apps/examples/media: media example was intended to take either a
command line argument, or a compiled-in default value from config.
However, the default was ignored, leading to confusing error
messages. From ziggurat29.
NuttX-7.18 Release Notes
------------------------
The 118th release of NuttX, Version 7.18, was made on October 8, 2016,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.18.tar.gz and
apps-7.18.tar.gz. These are available from:
https://bitbucket.org/nuttx/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- Add standard adjtime() interface and basic timekeeping support.
Normally used with an NTP client to keep system time in
synchronization. From Max Neklyudov.
- Use the oneshot timer with optional entropy to measure CPU load if
so configured.
* File System and Block and MTD Drivers:
- Add Fujistu MB85RS256B ramtron support. From Beat K<>ng.
- SPI-based MTD driver for Macronix MX25L3233F or MX25L6433F. From
Aleksandr Vyhovanec.
* Graphics/Display Drivers:
- SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes.
From v01d (phreakuencies).
* Sensor Drivers:
- Add KXTJ9 Accelerometer driver from the Motorola Moto Z MDK.
- Add MFRC522 RFID ISO14443 and Mifare transceiver driver. From Alan
Carvalho de Assis.
- Add driver for the LIS3MDL 3 axis magnetometer. From Alexander
Entinger.
- Add driver for the MLX90393 3 axis magnetometer. From Alexander
Entinger.
- Add driver for the LIS3DSH 3 axis accelerometer. From Alexander
Entinger.
- Add driver for the Bosch BMG160 3 axis gyroscope. From Alexander
Entinger.
- Add support for the Sensixs XEN1210 3D-board. This sensor is used
on NANOSATC-BR2 a Brazillian CUBESAT project. From Alan Carvalho
de Assis.
- Add a new ioctl command (set MAXPOS) for Tiva QEI. From Young.
* Other Common Device Drivers:
- I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h
definitons. Add support for an attach() method that may be used
when any subset of pin interrupts occur.
- I/O Expander Interface: Encode and extend I/O expander options to
include interrupt configuration.
- PCA9555 Driver: Replace the signalling logic with a simple callback
using the new definitons of ioexpander.h. This repartitioning of
functionality is necessary because (1) the I/O expander driver is
the lower-lower part of any driver that uses GPIOs (include the GPIO
driver itself) and should not be interacting directly with the much
higher level application layer. And (2) in order to be compatible
with the GPIO driver (and any arbitrary upper half driver), the
PCA9555 should not directly signal, but should call back into the
upper half. The upper half driver that interacts directly with the
application is the appropriate place to be generating signal.
- Add a skeleton I/O Expander driver (based on the PCA9555 driver).
- Add PCF8574 I/O Expander driver.
- GPIO driver: Add IOCTLs to get the pin type and to unregister a
signal handler.
- Add a GPIO lower-half driver that can be used to register a GPIO
character driver for accessing pins on an I/O expander.
- Add an SPI helper function that encapsulates and manages a sequence
of SPI transfers.
- Add an SPI character driver that will permit access to the SPI bus
for testing purposes.
- Add oneshot timer lower half interface definition.
- Add an upper-half, oneshot timer character driver.
- Add Audio Tone Generator for NuttX. From Alan Carvalho de Assis.
- Add USB host support for composite devices. This feature is not
well tested.
- drivers/ioexpander: Add an (untested) TCA64XX I/O Expander driver
leveraged from Project Ara.
* Simulation Platform:
- Add a simulated I/O Expander driver.
- Add simulator-based test support for apps/examples/gpio.
- Add a configuration useful for testing Mini Basic.
- Add a simulated oneshot lowerhalf driver.
* Atmel SAM3/4 Drivers:
- SAM4CM: Add option to support oneshot timer without free-running
timer. Add oneshot lower half driver.
* Atmel SAMA5 Drivers:
- SAMA5D: Add option to support oneshot timer without free-running
timer. Add oneshot lower half driver.
* Atmel SAMV7 Drivers:
- SAMV71/SAME70: Add option to support oneshot timer without
free-running timer. Add oneshot lower half driver.
- Add support for SAMV7 DACC module. From Piotr Mienkowski.
* NXP Freescale Kinetis Drivers:
- Add support for I2C and RTC. From v01d (phreakuencies).
* NXP Freescale Kinetis Boards:
- Add teensy 3.x I2C support. From v01d (phreakuencies).
* STMicro STM32:
- Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and
STM32F107RC. From Aleksandr Vyhovanec.
* STMicro STM32 Drivers:
- Add timekeeping support for the STM32 tickless mode. From Max
Neklyudov.
- Add a oneshot, lower-half driver for STM32.
- STM32 L4: Add oneshot lower half driver for STM32 L4.
- STM32 L4: Add support for quadrature encoders on STM32L4. Sebastien
Lorquet.
* STMicro STM32 Boards:
- stm32f103-minimum: Add board support to MFRC522 driver. From Alan
Carvalho de Assis.
- Add oneshot board initialization to stm32f103-minimum. From Alan
Carvalho de Assis.
- stm32f103-minimum: Add board configuration to initialize Audio Tone
Generator. From Alan Carvalho de Assis.
- stm32bufferfly2: Add support for the Kamami stm32butterfly2
development board with optional ETH phy. From Michal Lyszczek.
- stm32f103-minimum: Add board config support to SPI LCD module
JLX12864G-086. From Alan Carvalho de Assis.
- stm32l476-mdk: Support basic booting and nsh on Motorola MDK. The
Motorola MDK is based off of an earlier version of NuttX.
This only provides a basic NSH shell. From Jim Wylder.
- STM32 F4 Discovery: Add support for XEN1210 3D-board. From Alan
Carvalho de Assis.
- stm32f103-minimum: Add stm32_bringup support and userled example to
STM32F103 Minimum board. From Alan Carvalho de Assis.
- Add support for qencoders on various nucleo boards. From Sebastien
Lorquet.
- olimex-stm32-e407: Add some networking configurations. From Mateusz
Szafoni.
* TI Tiva Drivers:
- Add tiva PWM lower-half driver implementation. From Young.
- Tiva QEI: Add QEI lower-half driver for Tiva series chip. From
Young.
* C Library/Header Files:
- Separate XorShift128 PRNG from /dev/urandom and make it generally
available.
- Add POSIX type sig_atomic_t. From Sebastien Lorquet.
- Add the difftime() function. The function depends on the toolchain-
dependent CONFIG_HAVE_DOUBLE so is not available on tiny platforms.
From Sebastien Lorquet.
- Add support for remove(). From Sebastien Lorquet.
- Add system() to stdlib.h. Actual implementation is in
apps/system/system.
* Build/Configuration System:
- Rename arch/sh to arch/renesas.
- Remove contactless drivers from drivers/wireless to drivers
contactless. From Sebastien Lorquet.
- Move all modem-related IOCTL commands to a common file to assure
that they will be unique.
* Tools:
- Add sethost.sh. This is a script that you can use to quickly
change the host platform from Linux to Windows/Cygwin. Might save
you a lot of headaches.
* Applications: apps/nshlib:
- Add logic to support an NSH-specific system command.
- Add printf command to NSH, e.g., controlling /dev/userleds from
command line: nsh> printf \x01 > /dev/userleds. From Alan Carvalho
de Assis.
* Platforms: apps/system:
- Port tee command from NetBSD.
- Add a generic system command. Current implentation cannot use
/bin/sh and spawns the custom NSH system command directly.
* Platforms: apps/platform:
- Add C++ support for STM32L476-MDK.
* Platforms: apps/interpreters:
- Add a port of Mini Basic, version 1.0, written by Malcom McLean and
released under the Creative Commons Attribution license.
* Applications: apps/examples:
- Add a simple test of the GPIO driver.
- Add RFID_READUID sample application. From Alan Carvalho de Assis.
- Add Oneshot timer example.
- Add a simple test of the system command.
Works-In-Progress:
* IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
introduced in NuttX-7.15. Work has continued on this effort on
forks from the main repositories, albeit with many interruptions.
The completion of this wireless feature will postponed until at
least NuttX-7.19.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- Explicitly initialize the group tg_exitsem with sem_init(). The
existing logic worked because the correct initialization value is
all zero, but it is better to initialize the semaphore explicitly.
- The TCB nchildren field should not be incremented when pthreads are
created.
- Move fields related to parent/child task relationship out of TCB
into group structure where they belong. Child is a group, not a
thread.
- mq_send() was not setting the errno value on certain failures to
allocate a message.
- Define 'group' even if HAVE_GROUPID is not set. From Mateusz
Szafoni.
- Vector table should have dimension NR_IRQS, not NR_IRQS+1. From
Sagitta Li.
- pthreads: When a pthread is started, there is a small bit
of logic that will run on the thread of execution of the new
pthread. In the case where the new pthread has a lower
priority than the parent thread, then this could cause both the
parent thread and the new pthread to be blocked at the priority of
the lower priority pthread (assuming that CONFIG_PRIORITY_INHERITANCE
is not selected). This change temporarily boosts the priority of the
new pthread to at least the priority of the new pthread to at least
the priority of the parent thread. When that bit of logic has
executed on the thread of execution of the new pthread, it will then
drop to the correct priority (if necessary) before calling into the
new pthread's entry point.
* File System/Block Drivers/MTD Drivers:
- FAT performance improvement. In large files, seeking to a
position from the beginning of the file can be very time consuming.
ftell does lssek(fd, 0, SET_CURR). In that case, that is wasted
time since we are going to seek to the same position. This fix
short-circuits fat_seek() in all cases where we attempt to seek to
current position. Suggested by Nate Weibley.
- MTD: Fixed cloned typos in several FLASH drivers. From Aleksandr
Vyhovanec.
- mount: Corrects a bad assertion noted by Pierre-noel Bouteville.
Also fixes a reference counting problem in an error condition:
When the mountpoint inode is found but is not an appropriate
mountpoint, the reference count on the inode was not being
decremented.
* Common Drivers:
- Various serial drivers: Fix FIONWRITE and add FIONSPACE. All
implementations of FIONWRITE were wrong. FIONWRITE should return
the number of bytes waiting in the outgoing send queue, not the free
space. Rather, FIONSPACE should return the free space in the send
queue.
- Add missing prototype for btn_lower_initialize().
- Make DAC sample structure packed. From Marc Recht<68>.
* Networking:
- TCP: tcp_ipvX_bind() not actually using the port selected with
port==0. Also removes duplicate call to pkt_input(). Issues noted
by Pascal Speck.
- drivers/net: NET_TUN=y => NET_MULTIBUFFER=y. From Vladimir
Komendantskiy.
- slip driver: Fix calculations using MSEC_PER_TICK. If
USEC_PER_TICK is less than 1000, then MSEC_PER_TICK will be
zero. It will be inaccurate in any case.
* Atmel SAM3/4 Drivers:
- SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is
configured as input. The value of a GPIO input is only sampled when
the peripheral clock for the port controller the GPIO resides in is
enabled. Therefore we need to enable the clock even when polling a
GPIO. From Wolfgang Reissnegger.
- All SAM Ethernet Drivers: Add support so that the drivers can be
built with CONFIG_NET_MULTIBUFFER=y.
- SAM3/4: Fix GPIO pull-up/down code. Enabling the pull-down resistor
while the pull-up resistor is still enabled is not possible. In this
case, the write of PIO_PPDER for the relevant I/O line is discarded.
Likewise, enabling the pull-up resistor while the pull-down resistor
is still enabled is not possible. In this case, the write of
PIO_PUER for the relevant I/O line is discarded. From Wolfgang
Rei<65>negger.
* Atmel SAMV7 Drivers:
- All SAM Ethernet Drivers: Add support so that the drivers can be
built with CONFIG_NET_MULTIBUFFER=y.
- SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7.
* Atmel SAMA5:
- Add missing oneshot max_delay method.
- All SAM Ethernet Drivers: Add support so that the drivers can be
built with CONFIG_NET_MULTIBUFFER=y.
- SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7.
* NXP Freescale LPC43xx Drivers:
- LPC43xx serial: Fix typos in LPC43 serial driver. Found by Vytautas
Lukenskas.
- LPC43xx Serial: There are some small problems in LPC43xx RS485 mode
configuration. In particular: (1) UART0,2,3 do not have DTR pins
(different from UART1), so, Kconfig needs to be adjusted. (2)
lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't
enable pin output for UART0,2,3. (3) should be option to reverse DIR
control pin output polarity. (4) lpc43xx/chip/lpc43_uart.h doesn't
have USART3 definitions. NOTE: I didn't modified and didn't tested
USART1, as it has different hardware. From Vytautas Lukenskas.
From Vytautas Lukenskas.
* SiLabs EFM32 Drivers:
- EFM32 SPI drivers adopted incompatible conventions (See STM32 for
details of the issue).
* STMicro STM32 Drivers:
- STM32, STM32 L4, and EFM32 SPI drivers adopted incompatible
conventions somewhere along the line. They set the number of bits
to negative when calling SPI_SETBITS which had the magical side-
effect of setting LSB first order of bit transmission. This is not
only a hokey way to pass control information but is supported by no
other SPI drivers. This change three things: (1) It adds
HWFEAT_LSBFIRST as a new H/W feature. (2) It changes the
implementations of SPI_SETBITS in the STM32 and EFM32 drivers so
that negated bit numbers are simply errors and it adds the
SPI_HWFEATURES method that can set the LSB bit order, and
(3) It changes all calls with negative number of bits from all
drivers: The number of bits is now always positive and
SPI_HWFEATURES is called with HWFEAT_LSBFIRST to set the bit order.
- Add missing SPI2 and SPI3 support for STM32F3F3. Add STM32F37XX DMA
channel configuration. For STM32F37XX, SYSCFG_EXTICR_PORTE defined
twice. From Alan Carvalho de Assis.
- STM32: Make stm32_pwr_enablebkp thread safe. From Max Neklyudov.
- Fix bad pllmul values for STM32F1XX connectivity line. STM32F1XX
connectivity line supports only x4, x5, x6, x7, x8, x9 and x6.5
values. From Michal Lyszczek.
- STM32F3 SPI: Fix the number of bit setting for the F3. That and
data packing work differently on the STM32F3 than for other STM32
parts.
- STM32 and STM32 L4: Enabling SPI DMA loses other bits in CR2.
- STM32F3 SPI: Cannot write always 16-bit value to DR register
because of how the F3 implements data packing.
- STM32F411 and STM32F446 map i2c2_sda_4 to different alternate
function numbers. From Konstantin Berezenko.
- STM32 DMA Fix: Change stm32 adc dma callback to send channel
number instead of index. From Konstantin Berezenko.
- STM32 OTGFS device: Fix for lost first word from FIFO
1) Do not overwrite Reserved Bits in GINTSTS (per ref manual)*
2) Acknowledge all pending int on entry to ISR that are Only rc_w1*
3) Do not disable RXFVL*
4) Loop until RXFVL is cleared*
5) Only clear the NAK on the endpoint on the OTGFS_GRXSTSD_PKTSTS_SETUPDONE to not loose the first WORD of FIFO all the data (Bug Fix)
Changed marked *are just driver clean up and ensure ints are not lost. The bug fix is #5
Test case open putty and observer the Set/Get LineCoding. Without this fix #5 the Get will not match the Set, and in fact the data might be skewed by 4 bytes, that are lost from the FIFO if the OTGFS_DOEPCTL0_CNAK bit is set in the OTGFS_GRXSTSD_PKTSTS_SETUPRECVD as opposed to the OTGFS_GRXSTSD_PKTSTS_SETUPDONE
Set Line Coding DATA1: 4B | 00 c2 01 00 00 00 08 | c8 1B
Get Line Coding DATA1: 4B | .. .. .. .. 00 00 08 c8 .. 00 00 07 | 7a 72
From David Sidrane.
- STM32 L4 OTGFS device: Apply stm32 fix to stm32l4. From Sebastien
Lorquet.
- STM32 F7: Remove duplicate call to pkt_input from Ethernet driver.
Issues noted by Pascal Speck.
- STM32 L4: Add support for USART3-USART5. For STM32L4 parts, the
higher number USART ports supported varies. Add the HAVE_USARTx
definitions to the configuration to allow enabling the higher
numbered USART ports. From Jim Wylder.
- STM32 USB: Set USB address to avoid a failed assertion. From
Pierre-noel Bouteville.
- STM32 L4 and L7 USB: Pierre's assertion-avoidance change should
also be applied to STM32 F7 and L4.
- STM32, L4, and F7: Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not
present in RMII. Mateusz Szafoni.
- STM32 Ethernet: Correct typo in conditional logic. From Neil
Hancock.
- STM32 L4 USB Device: Fixed L4 USB Driver by avoiding SETUPDONE and
EPOUT_SETUP. From David Sidrane.
- STM32 SPI: stm32_modifycr2 should be available on all platforms if
DMA is enabled.
- STM32 DMA2D: fix an error in up_dma2dcreatelayer where an invalid
pointer was returned when a certain underlying function failed.
From Jens Gr<47>f.
* TI Tiva Drivers:
- Fix two bugs of tiva pwm lower-half driver implementation. From
Young.
- Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y.
* C Library/Header Files:
- lib_dumpbuffer() now prints a large on-stack buffer first to avoid
problems when the syslog output is prefixed with time. From
Pierre-noel Bouteville.
- libc/math: This fixes the following libc/math issues: (1) asin[f l]()
use Newton<6F>s method to converge on a solution. But Newton<6F>s method
converges very slowly (> 500,000 iterations) for values of x close to
1.0; and, in the case of asinl(), sometimes fails to converge (loops
forever). The attached patch uses an trig identity for values of
x > sqrt(2). The resultant functions converge in no more than 5
iterations, 6 for asinl(). (2) The NuttX erf[f l]() functions are
based on Chebyshev fitting to a good guess. The problem there<72>s a
bug in the implementation that causes the functions to blow up with
x near -3.0. This patch fixes that problem. It should be noted that
this method returns the error function erf(x) with fractional error
less than 1.2E-07 and that<61>s fine for the float version erff(), but
the same method is used for double and long double version which
will yield only slightly better precision. This patch doesn't
address the issue of lower precision for erf() and erfl(). (3) a
faster version of copysignf() for floats is included. From David S.
Alessio.
- strtod() was not returning endptr on error conditions.
- libc/math: floor(), floorf(), and floorl(): Fix logic error. Was
not correctly handling negative integral value.
- isatty() should be prototyped in unstid.h, not termios.h. From
Sebastien Lorquet.
- nxglib: Fix handling of near-horizontal lines of width 1 in
nxgl_splitline(). Missing handling for degenerate condition caused
width 1 lines such as (0, 0) - (100, 10) to have gaps in the
drawing. From Petteri Aimonen.
* Build/Configuration System:
- Top-Level Makefiles: Fix a chicken-and-egg problem. In the menuconfig
target, the context dependency was executed before kconfig-mconf. That
was necessary because the link at apps/platform/board needed to be set
up before creating the apps/Kconfig file. Otherwise, the platform
Kconfig files would not be included. But this introduces the chicken-
and-egg problem in some configurations. In particular: (1) An NX
graphics configuration is used that requires auto-generation of
source files using cpp, (2) the configuration is set for Linux, but
(3) we are running under Cygwin with (4) a Windows native toolchain.
In this case, POSIX-style symbolic links are set up but the Windows
native toolchain cannot follow them. The reason we are running
'make menuconfig' is to change from Linux to Cygwin, but the target
fails. During the context phase, NX runs CPP to generate source files
but that fails because the Windows native toolchain cannot follow
the links. Checkmate. This was fixed by changing all of the make
menuconfig (and related) targets. They no longer depend on context
being run. Instead, they depend only on the dirlinks target. The
dirlinks target only sets up the directory links but does not try
to run all of the context setup; the compiler is never invoked; no
code is autogenerated and things work.
- CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used. From
Beat K<>ng.
* Tools
- tools/refresh.sh: Recent complexities added to apps/ means that
configuration needs the correct Make.defs file in place in order to
configure properly.
- tools/kconfig2html.c: Update to handle absolute paths when sourcing
Kconfig files.
- tools/mkfsdata.pl was still generating the old-style apps/include
inclusion paths.
* Application Build/Configuration System:
- Add DIRLINK and DIRUNLINK tool definitions to apps/Make.defs.
* apps/nshlib:
- Fix FIFO_SIZE vs PIPE_SIZE.
- Fix hex representation of IP address in Kconfig. Noted by Michal
Lyszczek.
- nsh_syscmds.c: missing semicolon. From Mateusz Szafoni.
- In system command, don't try to flush output streams if stdio
buffered I/O is not supported.
* apps/canutils:
- libuavcan: Under certain circumstances, DELIM is not be defined in
Makefile.
- Add definition for APPNAME in apps/canutils/canlib. From Sebastien
Lorquet.
* apps/gpsutils:
- Fix an error minmea. From Aleksandr Vyhovanec.
* apps/examples:
- apps/examples/oneshot: If the requested delay is > max_delay, then
break the delay up into several pieces.
NuttX-7.19 Release Notes
------------------------
The 119th release of NuttX, Version 7.19, was made on December 26, 2016,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.19.tar.gz and
apps-7.19.tar.gz. These are available from:
https://bitbucket.org/nuttx/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- sched/semaphore, sched/phread/, libc/semaphore, libc/pthread: Add
pthread_mutexattr_get/set_protocol and non-standard
sem_get/set_protocol. These may use to enable or disable priority
inheritance on a single semaphore.
- Spinlocks: Added capability to provide architecture-specific memory
barriers.
- SMP: Add spin_trylock(). Use this in conditions where other CPUs need
to stopped but we cannot call enter_critical_section().
- sched note: Extend OS instrumentation to include some SMP events.
Also add spinlock instrumentation; In SMP configurations, add a
filter mask to log only notes from certain CPUs.
- sched note: Permit spinlock and critical section notes in in-memory
buffer iff sched_not_get() interfaces is disabled.
- sched note: Add additional note to see if/when CPU is started in SMP
mode.
- sched note: Record ID enumeration now results on constant values; ID
values do not change with configuration. This makes writing post-processing software much easier.
- boardctl: Add new boardctl() command, BOARDIOC_NX_START, to start the
NX server as a kernel thread.
- pthreads: Add pthread_cleanup_push() and pthread_cleanup_pop().
- pthreads: Added pthread_setcanceltype() and pthread_testcancel().
- pthreads: Add support for cancellation points.
- task_delete() now obeys all cancellation point semantics.
- Add task_setcancelstate(), task_setcanceltype(), and
task_testcancel(). These are non-standard interfaces analogous to the
correponding pthread_ interfaces that provide cancellation controls
for tasks.
* Graphics/Display Drivers:
- boardctl: Add new boardctl() command, BOARDIOC_NX_START, to start the
NX server as a kernel thread.
* Networking/Network Drivers:
- Network drivers: Add option to use low-priority work queue to all
Ethernet and MAC level drivers.
- Network Drivers: Adapt all Ethernet (and other MAC) drivers to work
as though CONFIG_NET_MULTIBUFFER were set. Remove all references to
CONFIG_NET_MULTIBUFFER.
- Eliminate CONFIG_NO_NOINTS. There is no longer any support for
interrupt level processing of the network stack. Lots of files changed.
* Other Common Device Drivers:
- Vishay VEML6070: Add Vishay VEML6070 driver. From Alan Carvalho de
Assis.
* ARMv7-A
- ARMv7-A/i.MX6: Add SCU register definitions. Add some controls to
enable SMP cache coherency in SMP mode. Makes no difference, however
-- cache still incoherent on i.MX6.
- ARMv7 GIC: SGIs are non-maskable but go through the same path as
other, maskable interrupts. Added logic to serialize SGI processing
when necessary.
* Atmel SAM3/4:
- SAM3/4: Add SMP support for the dual-core SAM4CM. From Masayuki
Ishikawa.
* Atmel SAM3/4 Drivers:
- Add support for the SAM5CMP-DB board. From Masayuki Ishikawa.
* Atmel SAM3/4 Boards:
- SAM4CMP-DB: Add support for the Atmel SAM4CMP-DB board running in an
SMP configuration. From Masayuki Ishikawa.
- SAM4CMP-DB: Add hooks to auto-mount the procfs file system on startup
in board bring-up logic.
* Atmel SAMV7 Drivers:
- SAMv7: Register the watchdog device at the configured device path
CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt. From Frank Benkert.
* Calypso
- Calyps: Remove all Calypso board configurations. Remove Calypso
architecture support and support for Calypso SERCOMM driver.
* Misoc LM32:
- Misoc LM32: Adds basic support for the Misoc procoessors and the LM32
in particular. From Ramtin Amin.
- Misoc LM32: Add signal handling logic. From Ramtin Amin.
- Misoc LM32: Add logic to flush/invalidate caches. From Ramtin Amin.
* Misoc LM32 Drivers:
- Misoc LM32 Serial: Add interrupting Misoc serial driver. From Ramtin
Amin.
- Misoc LM32 Timer: Add timer driver. From Ramtin Amin.
- Misoc LM32: Add Misoc Ethernet driver From Ramtin Amin.
* Misoc LM32 Boards:
- Misoc LM32 Qemu: Board support for testing Misoc LM32 with Qemu. From
Ramtin Amin.
- Misoc LM32 Qemu: Integrate network support into configs/misoc/hello.
From Ramtin Amin.
- Misoc LM32 Qemu: Remove configs/misoc/include/generated directory. I
suppose the intent now is that this is a symbolic link? DANGER!
This means that you cannot compile this code with first generating
these files a providing a symbolic link to this location! There is a
sample directory containing generated sources. This is really only
useful for performing test builds. You really must generate the Misoc
architecture for a real-life build. From Ramtin Amin.
* NXP Freescale i.MX6 Drivers:
- i.MX6: Add an untested SPI driver taken directly from the i.MX1 port.
* NXP Freescale Kinetis:
- Kinetis: Added missing headers. Kinetis broke out SPI to
kinetis/kinetis_spi.h. Broke out DMA to use the modern Nuttx chip
inclusion - still STUBS. Add Kinetis support for ARMV7-M Common
Vector and FPU. Allow CONFIG_ARMV7M_CMNVECTOR,
CONFIG_STACK_COLORATION, CONFIG_ARCH_FPU. Fix i2c driver offset
swapped for value in kinetis_i2c_putreg. From David Sidrane.
* NXP Freescale Kinetis Drivers:
- Kinetis: Add UID Unique ID. From Neil Hancock.
* NXP Freescale Kinetis Boards:
- Freedom-K64F board: Add support for UID Unique ID. From Neil Hancock.
* NXP Freescale LPC17xx Boards:
- Olimex-LPC1766-STK: Enable procfs in NSH configuration. Automount
/proc on startup.
* NXP Freescale LPC43xx Drivers:
- LPC43xx: Add timer driver: From Alan Carvalho de Assis.
- LPC43xx GPDMA driver: The GPDMA block is basically the same as the
LPC17xx. Only the clock configuration is different and LPC43xx has
four different DMA request sources, where LPC17xx has only two. From
Alan Carvalho de Assis.
* NXP Freescale LPC43xx Boards:
- Bambino 200E: Add basic support to Micromint Bambino 200E board.
This includes contributions from Jim Wolfman. From Alan Carvalho de
Assis.
- Bambino 200E: Add support for timer driver. From Alan Carvalho de
Assis.
* RGMP:
- Remove RGMP and RGMP drivers.
* RISC-V:
- RISC-V: Add support for the RISC-V architecture and
configs/nr5m100-nexys4 board. The board support on this is pretty
thin, but it seems like maybe a good idea to get the base RISC-V stuff
in since there are people interested in it. From Ken Pettit.
* STMicro STM32 Drivers:
- STM32 F3: Implemention of the STM32 F37xx SDADC module. There are
also changes to ADC, DAC modules. SDADC has only been tested in DMA
mode and does not support external TIMER triggers. This is a work in
progress. From Marc Recht<68>.
- STM32 F3: Add PWM driver support for STMF37xx. The changes have been
tested successfuly for TIM4 and TIM17 (different IPs). From Marc
Recht<68>.
- STM32 F4: Support oversampling by 8 for the STM32 F4. From David
Sidrane.
- STM32 F4: Added Timers 2-5 and control of SAI and I2S PLLs. Added
support for stmf469 SAI and I2S PLL configuration and STM446 fixes.
From David Sidrane.
- STM32 F4: Expanded OTGFS support to stm32F469 and stm32f446. Added
missing bit definitions, Used stm32F469 and stm32f446 bit
definitions, Removed unsed header file. From David Sidrane.
- STM32 F4: Allow dma in 1 bit mode in STM32F4xxx. From David Sidrane.
- STM32 F7: Allow the config to override the clock edge setting. From
David Sidrane.
- STM32 L4: Support Complementary PWM outputs on STM32L4. From
Sebastien Lorquet.
- STM32 L4: Add implementation of dumpgpio for stm32l4, was required
for pwm debug. From Sebastien Lorquet.
* STMicro STM32 Boards:
- STM32F103 Minimum: Add button support. From Alan Carvalho de Assis.
- STM32F103 Minimum: Add support to PWM on STM32F103-Minimum board.
From Alan Carvalho de Assis.
- STM32F103 Minimum: Add RGB LED support on STM32F103 Minimum board.
From Alan Carvalho de Assis.
- STM32F103 Minimum: Add Vishay VEML6070 driver support to the
STM32F103-Minimum board. From Alan Carvalho de Assis.
- Nucleo-F303RE: Add STM32 F303RE hello configuration. From Marc
Recht<68>.
- Nucleo-L476: Support PWM testing on board Nucleo L476. From
Sebastien Lorquet.
- Nucleo L476: Add support for timers to Nucleo L476. From Sebastien
Lorquet.
- Hymini STM32v: Enable CONFIG_RTC in the hymini-stm32v/nsh2
(kitchensink) config. From Maciej W<>jcik.
- Olimex STM32-p407: Add support for the Olimex STM32 P407 board.
* TI Tiva Drivers:
- Tiva PWM: Support PWM_PULSECOUNT feature for TI tiva. From Young.Mu.
* Xtensa/ESP32
- Xtensa ESP32: Basic architectural support for Xtensa processors and
the Expressif. ESP32 added.
- Xtensa ESP32: Add EXPERIMENTAL hooks to support lazy Xtensa
co-processor state restore in the future.
- Xtensa ESP32: Basic port is function in both single CPU and dual CPU
SMP configurations. There is an NSH configuration for each CPU
configuration. Outstanding issues include missing clock configuration
logic, missing partition tables to support correct configuration from
FLASH, and some serial driver pin configuration issues.
- Xtensa ESP32: Add stack checking logic.
* Xtensa/ESP32 Boards:
- ESP32 Core v2: Basic support for Expressif ESP32 Core v2 board
added. The initial release includes an NSH and an SMP test
configuration.
- ESP32 Core v2: Add configuration to support linking NuttX for
execution out of IRAM.
- ESP32 Core v2: Automatically mount /proc at start-up.
- ESP32 Core v2: Add an OS test to verify the port.
* C Library/Header Files:
- libc/locale: Add a dummy setlocale() function to avoid drawing the
function from newlib. Add clocale header file.
- include/locale.h: Modify locale.h to add localeconv() and lconv
structure. From Alan Carvalho de Assis.
- libc/locale: Allows c++ code to compile with or without
CONFIG_LIBC_LOCALE and will generate a link error if
CONFIG_LIBC_LOCALE is not defined and setlocale is referenced. With
CONFIG_LIBC_LOCALE defined setlocale will act as if MB string is not
supported and return "C" for POSIX. C and "". From David Sidrane.
- libc/wchar: Add wcslen, wmemchr, wmemcmp, wmemcpy wmemset, btowc,
mbrtowc, mbtowc, wcscmp, wcscoll, and wmemmove to NuttX. From Alan
Carvalho de Assis.
- libc/wctype: Add functions wcrtomb, wcslcpy, wcsxfrm, wctob, wctomb,
wctype, localeconv, strcoll, strxfrm, swctype, towlower, towupper and
wcsftime. Add wctype.h; Move lib_wctype.c to libc/wctype. From Alan
Carvalho de Assis.
- include/ctype.h : Add isblank() macro to ctype.h. From Alan Carvalho
de Assis.
- lic/stdlib: Add strtof() and strtold() as simply a copy of strtod
with types and limits changed.
- sscanf(): Use strtof() instead of strtod() if a short floating point
value was requested. The should help performance with MCUs with
32-bit FPU support with some additional code size.
- sscanf(): Add scansets to the scanf function. Enabled
CONFIG_LIBC_SCANSET option. From Aleksandr Vyhovanec.
- include/inttypes.h: Add architecture-specific inttypes.h. From Paul
A. Patience.
- C Library: Allow option to enable IP address conversions even when
the IP address family is not supported.
* Build/Configuration System:
- The Smoothie project needs to compile C++ inside config/boardname/src/
to use with High Priority Interruption, then I modified the board
configs Makefile to support it. It works fine for the first time
compilation, but if we execute "touch config/boardname/src/Pin.cxx"
and execute "make" it will not detect that Pin.cxx was modified. I
think there is some other place I should modify, but I didn't find
it. From Alan Carvalho de Assis.
* Tools:
- tools/: Add tools/showsize.sh.
* NSH: apps/nshlib:
- NSH: dd command will show statistics. From Masayuki Ishikawa.
* Applications: apps/system:
- apps/system/sched_note: Extend to include additions to instumentation
for SMP.
- apps/system/sched_note: Add support for spinlock notes.
- apps/system/sched_note: Add support for new scheduler instrumentation.
* Platforms: apps/platform:
- ESP32 Core v2: Add platform support for the ESP32 core v2 board.
- Olimex STM32-p407: Add platform support for the Olimex STM32 P407.
* Graphics: apps/graphics
- graphics/traveler/tcledit and libwld: Add an X11 Tcl/Tk tool that can
be used to edit Traveler world files.
- Graphics: Remove all NX server taks. Instead, call boardctl() to the
NX server kernel thread.
* Applications: apps/examples:
- examples/buttons: Add a new buttons example that uses the button
character driver instead of the architecture buttons directly. From
Alan Carvalho de Assis.
- examples/cctype: Add an example to verify cctype functions.
- Remove RGMP example.
- examples/ostest: Extend the pthread cancellation test to exercise
pthread_cleanup_push() (and pthread_cleanup_pop() indirectly via
pthread_cancel() and pthread_exit().
- examples/ostest: enhance pthread cancellation test some.
Works-In-Progress:
* IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
introduced in NuttX-7.15. Work has continued on this effort on
forks from the main repositories, albeit with many interruptions.
The completion of this wireless feature will postponed until at
least NuttX-7.20.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- sched/semaphore: Within the OS, when a thread obtains a semaphore
count it must call sem_addholder() if CONFIG_PRIORITY_INHERITANCE is
enabled. If a count is available, then sem_wait() calls
sem_addholder(), otherwise it waited for the semaphore and called
sem_addholder() when it eventually received the count. This caused a
problem when the thread calling sem_wait() was very low priority.
When it received the count, there may be higher priority threads
"hogging" the CPU that prevent the lower priority task from running
and, as a result, the sem_addholder() may be delayed indefinitely.
The fix was to have sem_post() call sem_addholder() just before
restarting the thread waiting for the semaphore count. This problem
was noted by Benix Vincent who also suggested the solution.
- Many files: Make sure that priority inheritance is not enabled for
semaphores whose primary use is signaling (vs locking of resources) by
calling sem_setprotocol().
- sched/semaphore: sem_trywait() no longer modifies the errno value
UNLESS an error occurs. This allows these functions to be used
internally without clobbering the errno value. From Freddie Chopin.
- sched/clock: Correct clock initialization. The correct range for the
month is 0-11 but is entered as 1-12 in the .config file. Add ranges
to START_YEAR, MONTH, and DAY in sched/Kconfig.
- sched/clock: Correct calculation for the case of Tickless mode with a
32-bit timer. In that case, the calculation was returning millisecond
accuracy. That is not good when the timer accuracy is < 1 msec. From
Rajan Gill.
- Work Queue: When queuing new LP work, don't signal any threads if
they are all busy. From Heesub Shin.
- Work Queue: Signal sent from work_signal() may interrupt the low
priority worker thread that is already running. For example, the
worker thread that is waiting for a semaphore could be woken up by the
signal and break any synchronization assumption as a result. It also
does not make any sense to send signal if it is already running and
busy. This change fixes it. From Heesub Shin.
- Fix DEBUGASSERT() in group_signal.c. From Masayuki Ishikawa.
- Eliminate bad boardctl() commands: Remove all references to
BOARDIOC_PWMSETUP and board_pwm_setup(). Remove all references to
BOARDIOC_ADCSETUP and board_adc_setup(). Remove
BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board
initialization logic just like every other device driver.
- pthreads: Fix an error in pthread_mutex_destroy(). An error could
occur while destroying a mutex after a pthread has been canceled while
holding the mutex.
- task_restart: Make sure new task starts with pre-emption disabled and
not in a critical section.
- Enter/leave Critical Sections. Major redeign to
enter/leave_critical_section logic to deal with the case where
interrupts are disabled only on the local CPU. In this case, some
rather complex spinlocks must be used to maintain the critical section
accross all CPUs.
- SMP Critical Sections: Fixes for the SMP case: (1) Change order for
SMP case in enter_critical_section: (1) Disable local interrupts
BEFORE taking spinlock and (2) If SMP is enabled, if any interrupt
handler calls enter_critical_section(), it should take the spinlock.
- SMP wdogs: Wdog timers use a tasking interface that to manipulate
wdogs, and a different interface in the timer interrupt handling logic
to manage wdog expirations. In the single CPU case, this is fine.
Since the tasking level code calls enter_critical_section, interrupts
are disabled and no conflicts can occur. But that may not be the case
in the SMP case. Most architectures do not permit disabling
interrupts on other CPUs so enter_critical_section must work
differently: Locks are required to protect code. this change adds
locking (via enter_critical section) to wdog expiration logic for the
the case if the SMP configuration.
- SMP vfork(): Fix a race condition in the SMP case. Existing logic
depended on the fact that the child would not run until waitpid was
called because the child had the same priority as the parent. BUT in
the SMP case that is not true... the child may run immediately on a
different CPU.
- SMP: This change adds a new internal interfaces and fixes a problem
with three APIs in the SMP configuration. The new internal interface
is sched_cpu_pause(tcb). This function will pause a CPU if the task
associated with 'tcb' is running on that CPU. This allows a different
CPU to modify that OS data stuctures associated with the CPU. When
the other CPU is resumed, those modifications can safely take place.
The three fixes are to handle cases in the SMP configuration where one
CPU does need to make modifications to TCB and data structures on a
task that could be running running on another CPU. Those three cases
are task_delete(), task_restart(), and execution of signal handlers.
In all three cases the solutions is basically the same: (1) Call
sched_cpu_pause(tcb) to pause the CPU on which the task is running,
(2) perform the necessary operations, then (3) call up_cpu_resume() to
restart the paused CPU.
- SMP: Add logic to avoid a deadlock condition when CPU1 is hung waiting
for g_cpu_irqlock with interrupts interrupts and CPU0 is waiting for
g_cpu_paused.
- SMP: Enforce this rule: Tasks which are normally restored when
sched_unlock() is called must remain pending (1) if we are in a
critical section, i.e., g_cpu_irqlock is locked , or (2) other CPUs
still have pre-emption disabled, i.e., g_cpu_schedlock is locked. In
those cases, the release of the pending tasks must be deferred until
those conditions are met.
* File System/Block Drivers/MTD Drivers:
- AT24XX EEPROM MTD driver: Added EEPROM timeout. Fromo Aleksandr
Vyhovanec.
- fs/procfs: Fix procfs status for SMP case.
* Graphics/Graphic Drivers:
- Fonts: Correct some default font IDs. From Pierre-Noel Bouteville.
* Common Drivers:
- usbhost/enumerate: Fix possible buffer overwrite. From Janne Rosberg.
- usbhost/composite: Fix compile; missing semicolons. From Jann Rosberg.
- syslog: Fixes required for file syslog output. From Max Kriegleder.
- SPI configuration: Fix Kconfig warning. This change moves the
ARCH_HAVE_SPI options outside the check for SPI. Those options don't
depend on SPI, and Kconfig files in arch/ enable them even if SPI
isn't enabled. Source the driver's Kconfig in drivers/Kconfig only
if support for the driver is enabled prevents us from defining these
ARCH_HAVE options in the driver's Kconfig. We should probably remove
the other checks in drivers/Kconfig and check if the drivers are
enabled only in their Kconfig. From Paul A. Patience.
- drivers/timer: Remove the timer driver TIOC_SETHANDLER IOCTL call.
This calls directly from the timer driver into application code. That
is non-standard, non-portable, and cannot be supported. Instead, add
timer driver hooks to support signal notification of timer
expiration. Signal notification logic added by Sebastien Lorquet.
- All timer lower half drivers. Port Sebastien's changes to all other
implementations of the timer lower half.
- USB MSC Device: Fix length of mode6 sense reply packet. From
Wolfgang Rei<65>negger.
- USB Composite Host: Fix end offset in usbhost_copyinterface(). From
Janne Rosberg.
- USB CDC/ACM Host: Add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to
supported class and proto. From Janne Rosberg.
- SSD1306: Fix errors in SPI mode configuration. From Gong Darcy.
- CDC/ACM Device Class: uart_ops_s portion of cdcacm will not be
initalized with correct functions if CONFIG_SERIAL_DMA is selected.
* Networking/Network Drivers:
- drivers/net/tun.c: Fix bug in TUN interface driver. From Max Nekludov.
* ARMv7-A:
- ARMv7-A SMP: Add SMP logic to signal handling.
* ARMv7-M:
- ARMv7-M: Fix double allocation of MPU region in mmu.h.
* ARMv7-R:
- ARMv7-R: Fix compilation error. This change fixes compilation errors
on MPU support for ARMv7-R. From Heesub Shin.
- ARMv7-R: fix invalid drbar handling. In ARMv7-R, [31:5] bits of DRBAR
is physical base address and other bits are reserved and SBZ. Thus,
there is no point in passing other than the base address. From Heesub
Shin.
- ARMv7-R: Remove the redundant update on SCTLR. mpu_control() is
invoking cp15_wrsctlr() around SCTLR update redundantly. From Heesub
Shin.
- ARMv7-R: add new Kconfig entries for d/i-cache. Unlike in ARMv7-A/M,
Kconfig entries for data and instruction caches are currently missing
in ARMv7-R. This change adds those missing Kconfig entries. Actual
implmenetation for those functions will be added in the subsequent
patches. From Heesub Shin.
- ARMv7-R: Add cache handling functions. This change adds functions for
enabling and disabling d/i-caches which were missing for ARMv7-R.
From Heesub Shin.
- ARMv7-R: Fix typo in mpu support. s/ARMV7M/ARMV7R/g. From Heesub Shin.
- ARMv7-R: Fix CPSR corruption after exception handling. A sporadic
hang with consequent crash was observed when booting. It seemed to be
caused by the corrupted or wrong CPSR restored on return from
exception. NuttX restores the context using code like this: msr spsr,
r1. GCC translates this to: msr spsr_fc, r1. As a result, not all
SPSR fields are updated on exception return. This should be: msr
spsr_fsxc, r1. On some evaluation boards, spsr_svc may have totally
invalid value at power-on-reset. As it is not initialized at boot, the
code above may result in the corruption of cpsr and thus unexpected
behavior. From Heesub Shin.
- ARMv7-R: Fix to restore the Thumb flag in CPSR. Thumb flag in CPSR is
not restored back when the context switch occurs while executing thumb
instruction. From Heesub Shin.
* Atmel SAM3/4 Drivers:
- SAM3/4 UDP: Add delay between setting and clearing the endpoint RESET
bit in sam_ep_resume(). We need to add a delay between setting and
clearing the endpoint reset bit in SAM_UDP_RSTEP. Without the delay
the USB controller will (may?) not reset the endpoint. If the
endpoint is not being reset, the Data Toggle (DTGLE) bit will not to
be cleared which will cause the next transaction to fail if DTGLE is
1. If that happens the host will time-out and reset the bus. Adding
this delay may also fix the USBMSC_STALL_RACEWAR in usbmsc_scsi.c,
however this has not been verified yet. From Wolfgang Rei<65>negger.
- SAM3/4: Remove unused 'halted' flag from UDP driver. From Wolfgang
Rei<65>negger.
- SAM3/4: Remove 'stalled' flag from the UDP driver. This flag is not
necessary because the state of the endpoint can be determined using
'epstate' instead. From Wolfgang Rei<65>negger.
* Atmel SAM3/4 Boards:
- SAM4S Xplained Pro: Configuration uses old, improper timer interface.
CONFIG_TIMER disabled in configuration. Remove obsolete timer
initialization logic.
* Atmel SAMV7 Drivers:
- SAMv7 USBDEVHS: A problem occurred with the SAMV7 USBDEVHS driver if
the USB cable is unplugged while a large amount of data is send over
an IN endpoint using DMA. If the USB cable is plugged in again after a
few seconds it is not possible to send data over this IN endpoint
again, all other endpoints work as expected. The problem occurs
because if the USB cable is unplugged while an DMA transfer is in
flight the transfer is canceled but the register SAM_USBHS_DEVDMACTRL
is left in an undefined state. The problem was fixed the problem by
resetting the register SAM_USBHS_DEVDMACTRL to a known state.
Additionally all pending interrupts are cleared. From Stefan Kolb.
- SAMV7 MCAN: Prevent Interrupt-Flooding of ACKE when not connected to
CAN-BUS. An Acknowledge-Error will occur every time no other CAN Node
acknowledges the message sent. This will also occur if the device is
not connected to the can-bus. The CAN-Standard declares, that the Chip
has to retry a given message as long as it is not sent successfully
(or it is not cancelled by the application). Every time the chip tries
to resend the message an Acknowledge-Error-Interrupt is generated. At
high baud rates this can lead in extremely high CPU load just for
handling the interrupts (and possibly the error handling in the
application). To prevent this Interrupt-Flooding we disable the ACKE
once it is seen as long we didn't transfer at least one message
successfully. From Frank Benkert.
- SAMV7 MCAN: Make delete_filter functions more robust. From Frank
Benkert.
* Atmel SAMA5 Drivers:
- SAMA5 PWM: Driver does not build when executing from SDRAM before
board frequencies are not constant. Rather, the bootloader configures
the clocking and we must derive the clocking from the MCK left by the
bootloader. This means lots more computations. This is untested on
initial change because I don't have a good PWM test setup right now.
* Misoc LM32:
- Misoc LM32: Corrects a bug that never occured in qemu on simulation or
real fpga. The error was that the r1 register was being modified out
of context switching and not restoring it. From Ramtin Amin
* NXP Freescale i.MX6:
- i.MX6 interrupt handling: Additional logic needed to handle nested
interrupts when an interrupt stack is used. Nesting can occur because
SGI interrupts are non-maskable.
* NXP Freescale LPC43xx Drivers:
- LPC43xx serial: Fix a typo in ioctl TIOCSRS485 ioctl. From Vytautas
Lukenskas.
- LPC43xx serial: Restore RS485 mode on serial port open (if RS485 is
enabled via menuconfig). From Vytautas Lukenskas.
- LPC43xx SD/MMC: Correct some definitions on SMMC control register in
lpc43_sdmmc.h. From Alan Carvalho de Assis.
- LPC43xx SD card: Correct pin configuration options needed for SD card
pins. From Alan Carvalho de Assis.
* SiLabs EFM32:
- EFM32: Fix a compilation error. From Pierre-noel Bouteville.
* STMicro STM32 Drivers:
- STM32 CHxN channels are always outputs. From Sebastien Lorquet.
- STM32 DAC: Fix shift value whenever there are is a DAC2 and, hence,
up to three interfaces. From Marc Recht<68>.
- STM32 F1: Add TIM8 to STM32F103V pinmap. From Maciej W<>jcik.
- STM32 F1: Fix for F1 RTC Clock, tested on F103. From Maciej W<>jcik.
- STM32 F3: STM32F303xB and STM32F303xC chips have 4 ADCs. From Paul
A. Patience.
- STM32 F4: A new implementation of the STM32 F4 I2C bottom half. The
common I2C as this did not handled correctly in the current
implementation (see also https://github.com/PX4/NuttX/issues/54). The
changes almost exclusively affect the ISR. From Max Kriegleder.
- STM32 F4 OTGHS Host: If STM32F446 increase number of channels to
16. From Janne Rosberg.
- STM32 F4: I think, that Size is (highest address+1 - Base address).
Base address has been removed and if address+count >= size we are
outside of the Flash. From David Sidrane.
- STM32 F4: Fix ADC compilation error when DMA isn't enabled. From Paul
A. Patience.
- STM32 F4: STM32F427 was rebooting. Over reached family. From David
Sidrane.
- STM32 F4: Added STM32F469 RAM size and deliberated STM32F446 size.
From David Sidrane.
- STM32 F4: Typo in stm32f76xxxx_pinmap.h edited online with
Bitbucket. From David Sidrane.
- STM32 F7: stm32_i2c.c Dejavu. Fixes a bug previously found in the
F4. From David Sidrane.
- STM32 F7: OTGDEV fixed typo. From David Sidrane.
- STM32 F7: Fix to SPI-Master driver. Without this the chip select
decoding feature will not work properly. From Michael Spahlinger.
- STM32 F7: STM32F7 SD/MMC driver depends on CONFIG_SDIO_DMA which is
only defined in stm32/Kconfig. Changed to CONFIG_STM32F7_SDMMC_DMA
and defined in stm32f7/Kconfig.
- STM32 F7: Fix some STM32F7 copy paste errors. From David Sidrane.
- STM32 L4: Complementary PWM outputs on STM32L4" (1) too many
parentheses when calculating max chan count and (2) channel 4 does not
have a complementary output. From Sebastien Lorquet.
- STM32 L4: Fix I2C devices RCC registers. From Sebastien Lorquet.
- STM32 L4: Enable and renaming for 32l4 UARTs 4 and 5. From Sebastien
Lorquet.
- STM32 L4: Change the way to configure quadrature encoder prescalers.
From Sebastien Lorquet.
- STM32 L4: Correct USART1/2 definitions. Use default mbed UART4
settings. From Sebastien Lorquet.
* STMicro STM32 Boards:
- STM32F103 Minimum: Fix Timers 2 to 7 clock frequencies. From Alan
Carvalho de Assis.
- Nucleo-F303RE: Remove duplicate setting from board.h. From Marc
Recht<68>.
- Nucleo F303RE: Various fixes to get the ADC configuration building
again after PR. Refresh all configurations.
- Nucleo L476RG: Add better selection of timer.
* TI Tiva Boards:
- DK-TM4C129x: Typo fix. From Wolfgang Rei<65>negger.
* Xtensa ESP32:
- ESP32 core v2: Flush the UART TX buffer in the esp32 serial shutdown
routine. The ROM bootloader does not flush the FIFO before handing
over to user code, so some of this output is not currently seen when
the UART is reconfigured in early stages of startup. From Angus
Gratton.
- Xtensa ESP32: Corrects a problem with dispatching to signal
handlers: Cannot vector directly to the signal handling function as
in other ABIs under the Xtensa Window ABI. In that case, we need to
go through a tiny hook when performs the correct window call (call4)
otherwise registers will be scrambled in the signal handler.
* Xtensa ESP32 Boards:
- ESP32 core v2: Changes the openocd config file's default flash
voltage from 1.8V to 3.3V. This is not necessary right now, but may
save some hard-to-debug moments down the track (3.3V-only flash
running at 1.8V often half-works and does weird things...). From
Angus Gratton.
* C Library/Header Files:
- libc/stdio: Fixes sscanf() %sn where strlen(data) < n. From David
Sidrane.
- libc/stdio: Include wchar.h in lib_libvsprintf.c to fix compilation
error. From Alan Carvalho de Assis.
- include/sys/time.h: timersub macro modified per recommendations of
phreakuencies.
- include/ctype.h and cxx/cctype: Implement ctype.h functions as inline
if possible. cctype can then properly select namespace.
- include/: Fix a number of header files with mismatched 'extern C {'
and '}'.
- libc/unisted: Change brings strtol() and related functions more
conformant with POSIX. Corner cases like strtol(-2147483648, NULL,
10) now pass clang -fsanitize=integer without warnings. From Juha
Niskanen.
- libc/unistd: sleep() was returning remaining nanoseconds (kind of),
instead the remaining seconds. From Eunbong Song.
- termios.h: Fix CRTSCTS define to include input and output flow. From
Lorenz Meier.
* Build/Configuration System:
- configs/*/defconfig: The buttons example was changed to archbuttons.
As a result all of the button configurations are broken and need some
renaming in the defconfig files. Noted by Frank Berkert.
- config/*/defconfgs: More fallout from name change of
apps/examples/buttons to archbuttons.
- configs: All QE encoder files. Last change made timer hard-coded to
3. Make configurable.
- configs: Remove all traces of the no-longer existent ARCHBUTTONS
example. Remove all button configurations that depended on the
obsoleted ARCHBUTTON example.
- minnsh Configurations: Remove minnsh configurations and support
logic: up_getc() and lowinstream. This was an interesting exercise
to see just how small you could get NuttX, but otherwise it was not
useful: (1) the NSH code violated the OS interface layer by callup
up_getc() and up_putc() directly, and (2) while waiting for character
input, NSH would call up_getc() which would hog all of the CPU. Not a
reasonable solution other than as a proof of concept.
* Application Build/Configuration System:
- Make.defs: Using wrong link script if native window tool used with
Cygwin.
* apps/platform:
- ESP32 Core v2 Platform: Fix some naming that prevented building the
C++ support.
* apps/nshlib:
- NSH Library: nsh_getdirpath(), use snprint instead of sprintf to
avoid possibility of buffer overrun. Noted by Chung Hwan Kim.
* apps/system:
- Remove std_readline(). This called up_getc() and up_putc() directly,
violating the POSIX OS interface.
* apps/netutils:
- FTPD: Fixed bug that didn't free ftpd ressources on exit. From Pascal
Speck.
- NTP client: Fix missing left parenthesis. From Pierre-Noel Bouteville.
- cJSON: Import patch to fix:cJSON_PrintUnformatted() behaves unexpected
if an empty array shall be printed to text. from Jerome Lang
2012-04-19. From Pierre-Noel Bouteville.
- esp8266 update cosmetic and many bug fix. From Pierre-Noel Bouteville.
- FTPD: Fix bug un ftpd file or socket may be not closed. From
Pierre-Noel Bouteville.
* apps/modbus:
- Modbus Master is missing many files and doesn't compile at all. More
details in
https://groups.yahoo.com/neo/groups/nuttx/conversations/topics/13734.
From Vytautas Lukenskas.
* apps/examples:
- The examples/qencoder app was trying to init the encoder by a direct
call into the board, cheating in a local header to declare the
normally unavailable function prototype. From Sebastien Lorquet.
- apps/examples/timer: Should detach signal handler before exiting.
- examples/qencode: The examples/qencoder app was trying to init the
encoder by a direct call into the board, cheating in a local header to
declare the normally unavailable function prototype. From Sebastien
Lorquet.
- apps/examples/archbuttons: Removed becaue it violates OS interface
principles.
- examples/adc, pwm, can: Remove all usage of BOARDIOC_ADCTEST_SETUP,
BIOARDIOC_PWMSETUP. Remove BOARDIOC_CAN_INITIALIZE. CAN
initialization is now done in the board initialization logic just like
every other device driver.
- examples/ostest: Add some delays to the pthread cancellation test.
With deferred cancellation enabled, things happen more asynchronously.
NuttX-7.20 Release Notes
------------------------
The 120th release of NuttX, Version 7.20, was made on March 8, 2017,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.20.tar.gz and
apps-7.20.tar.gz. These are available from:
https://bitbucket.org/nuttx/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- Kernel Modules: Module initializer may now return a symbol table.
- Modules: Extend the module interface so that we can access symbols
exported by the module.
- Shared Libraries: In the FLAT build mode, kernel modules may be
used to provide minimal shared library functionality.
- Modules/Shared Libraries: Add support for dependencies between
modules.
- Module Library: Add build a configuration logic for a shared module
library.
- Shared Libraries: Implement module based shared libraries for the
PROTECTED mode build.
- Interrupt handling: irq_attach() now includes an argument of type
xcpt_t that retained with the handler address. That argument is
then provided to the interrupt handler when the interrupt occurs.
The common parameter passing replaces the ad hoc parmater passing
implemented in current drivers. From Mark Schulte.
- Adapt many drivers to utilize the IRQ argument feature.
- All functions that used to return an xcpt_t old handler value, now
return an int error code. The oldhandler value is no longer useful
with the recent changes to the interrupt argument passing. Some of
the functions effected include board_button_irq(), arch_phy_irq(),
STM32 EXTI functions (Alarm, COMP, PVD), GPIO interrupt logic like
kinetis_pinirq(), stm32_gpiosetevent(), and others.
- IRQ subsystem: Add support for smaller interrupt tables as
described at
http://www.nuttx.org/doku.php?id=wiki:howtos:smallvectors . This
is partially the work of Mark Schulte.
* File Systems/Block and MTD Drivers
- Pseudo File System: Add support for soft links in the top-level
psuedo file system.
- Soft links: Add an implementation of readlink().
- Add fstat() support. Implement fstat() method in binfs, romfs,
unionfs, tmpfs, nxffs, nfx, hostfs, procfs, and smartfs.
- fstat: Add fstat() support to FAT. From Alan Carvalho de Assis.
* Graphics/Display Drivers:
- Fonts: Add support for Tom Thumb small mono-space font. From Alan
Carvalho de Assis.
- Graphics: Separated of font cache from graphics/nxterm. Now in
libnx/nxfronts where it can be shared with other grapics
applications.
* Networking/Network Drivers:
- Ethernet drivers: Add framework for serialization in the case where
multiple low-priority work queues are used.
* Other Common Device Drivers:
- Add capabilities() method to SDIO interface. Remove
CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie,
but rather a capability/limitation of single slot when there may be
multiple slots.
- Removed dmasupported() method from the SDIO interface. That is now
a bit in the capability set.
- drivers/sensors: Add driver for the ST L3GD20 3 axis gyro. From
raiden00.
* Atmel SAM3/4:
- SAM3/4: Add support for ATSAM4S4C. From Wolfgang Rei<65>negger.
* NXP Freescale i.MX6 Boards:
- Sabre 6quad: Enable examples/smp test in i.MX6 SMP/NSH
configurations.
* NXP Freescale Kinetis:
- Kinetis: Added support for CHIP_MK60FN1M0VLQ12 chip. From Maciej
Skrzypek.
- Kinetis: Add support for K64/K66 RTC lower half driver. From Neil
Hancock.
- Kinetis: Extensive modification of MCG support based feature
configuration. From David Sidrane.
- Kinetis: Add support for K66 family. From David Sidrane.
- Kinetis: Created a kinetis SIM versioning scheme pulled in by
Kinetis chip.h. From David Sidrane.
- Created a kinetis PMC versioning scheme pulled in by Kinetis
chip.h. From David Sidrane.
- Kinetis: Extend clock configuration logic. Refactor
implementation. From David Sidrane.
* NXP Freescale Kinetis Drivers:
- Kinetis Ethernet: Kinetis Support RMII clock source select. This
defined the RMII clock source select bits and allows the selection
to be made via Kconfig. From David Sidrane. Freedom-K66F uses
ENET_1588_CLKIN as RMII clock
- Kinetis Serial: Added configurable 1|2 stop bits.
HAVE_SERIAL_CONSOLE -> HAVE_UART_CONSOLE to be consistent with
HAVE_LPUART_CONSOLE naming. From David Sidrane.
- Kinetis LPserial: Add LPUART serial driver and Clock
configuartaion to freedom-k66f board. From David Sidrane.
- Kinetis USB device: Refactor clocking in kinetis_usbdev. From
David Sidrane.
* NXP Freescale Kinetis Boards:
- Add support for NXP Freedom-k66f development board. From David
Sidrane.
- Kinetis Freedom K66F: Add Ethernet support. From David Sidrane.
- Add twr-k64f120m config. From Marc Recht<68>.
* NXP Freescale LPC43xx Boards:
- Bamboo-200E: Add netnsh configuration. From Alan Carvalho de Assis.
- Add usbnsh config to Bambino 200E board. From Alan Carvalho de
Assis.
* STMicro STM32:
- STM32 F7: Allow board to configure HSE clock in bypass-mode. This
is needed to enable HSE with Nucleo-F746ZG board. From Jussi
Kivilinna.
- STM32 F7: stm32_allocateheap: allow use DTCM memory for heap.
STM32F7 has up to 128KiB of DTCM memory that is currently left
unused. This change adds DTCM to main heap if
CONFIG_STM32F7_DTCMEXCLUDE is not enabled. From Jussi Kivilinna.
- Add basic support for the STM32F334. From Mateusz Szafoni.
- STM32F33XX DAC, OPAMP, COMP, ADC, HRTIM headers. From Mateusz
Szafoni.
* STMicro STM32 Drivers:
- STM32 F7 SDMMC: Add support for single bit operation on SDMMC2.
- STM32 L4: Port STM32L4 SAI driver from MDK.
- STM32 L4: Bring power management logic from Motrola MDK into NuttX.
- STM32 L4: Bring LPTIM driver in from the Motorola MDK.
- STM32 L4 COMP: Port from Motorola MDK.
* STMicro STM32 Boards:
- STM32F429i Discovery: Add support for NxWM on STM32F429i-Disco
board. From Alan Carvalho de Assis.
- STM32F103 Minimum: Add support for nRF24 on STM32F103-Minimum
board. From Alan Carvalho de Assis.
- Olimex STM32 P407: Add a NSH protected build configuration; Enable
procfs/ in all configurations.
- Olimex STM32 P407: Add support for on-board microSD slot.
- STM32F429i Discovery: add support for the L3GD20 driver. From
raiden00.
- STM32F103 Minimum: Add support to QEncoder on STM32F103 Minimum
board. From Alan Carvalho de Assis.
- Olimex STM32 P407: Add external SRAM support.
- Add basic support for the Nucleo F334R8 board. From Mateusz
Szafoni.
- STM32F103 Minimum: Add SDCard support over SPI on STM32F103-Minimum
board. From Alan Carvalho de Assis.
- STM32F103 Minimum: Add support to USB Device on STM32F103-Minimum
board. From Alan Carvalho de Assis.
* C Library/Header Files:
- compiler.h: packed_struct replaced by begin_packed_struct and
end_packed_struct. Now support IAR style packed structures. From
Aleksandr Vyhovanec.
- Math library: Leverage optimized ARMv8-M functions from BSD license
ARM file.
- Shared libraries: Add a non-standard dllfnc.h function to set the
symbol table.
- C Library: Add a support for setvbuf(). This is a collaborative
effort. Alan Carvalho de Assis did the initial prototype.
- C Library: Add setbuf() which is a trivial wrapper around setvbuf().
- C library: Add swab().
- C library: Add strtoimax and strtoumax.
- C library: Add ffs(), rindex(), an index(). Add strings.h. Move
strcasecmp, strncasecmp, bzero, bcmp, and bcopy to where they
belong in strings.h.h, not string.h. bzero, bcmp, and bcopy are
legacy functions; the contemporary counterparts should be used
instead.
- C library: Add fstatfs().
- Update cwchar. Add cwctype.
* Build/Configuration System:
- Add configuration support for builds with Ubuntu under Windows 10.
* Tools:
- tools/noteinfo.c: A hack tool that I use to analyze some sched_note
output. Needs a home and may be useful to others.
- tools/mkconfig.c: Add logic to keep all of the buffering options in
sync.
* NSH: apps/nshlib:
- NSH: Add support for the 'ln' command.
- NSH ls command: if node is a symobolic link, use readlink() to get
and the display the target of the symblic link.
- NSH: Add readlink command.
* Applications: apps/examples:
- apps/examples/nxtext: Make line spacing configurable.
- apps/system/zmodem/host/nuttx/compiler.h synchronized with
nuttx/nuttx/include/nuttx/compiler.h. From Aleksandr Vyhovanec.
- apps/examples/sotest: Add a test for shared libraries.
- apps/examples/ostest: Add a test of setvbuf().
- apps/examples/stat: Add a simple test for stat(), fstat(),
statfs(), and fstatfs().
Works-In-Progress:
* IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
introduced in NuttX-7.15. Work has continued on this effort on
forks from the main repositories, albeit with many interruptions.
The completion of this wireless feature will postponed until at
least NuttX-7.21.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- SMP: There were certain conditions that we must avoid by preventing
the release of the pending tasks while withn a critical section.
But this logic was incomplete; there was no logic to prevent other
CPUs from adding new, running tasks while on CPU is in a critical
section. This commit corrects this. This is matching logic in
sched_addreadytorun to avoid starting new tasks within the critical
section (unless the CPU is the holder of the lock). The holder of
the IRQ lock must be permitted to do whatever it needs to do.
- SMP: Make checks for CPU lock set more robust. There are certain
conditions early in initialization on during interrupt handling
where things need to be done a little differently.
- sched_cpulocked: Avoid use of spinlock. That has been reported to
cause a deadlock (2016-12-28).
- SMP: Fix a gap where we may try to make modifications to the task
lists without being in a critical sections. That permits
concurrent access to the tasks lists and many subtle problems.
This fix just remains in the critical section throughout the
operation (and possible until the task is restore in the event of a
context switch). Makes a big difference in stability.
- SMP: Fix an error in critical section logic when performing a
context switch from an interrupt handler. The g_cpu_irqset bit was
not being set for the CPU so other CPUs did not know about the
critical section.
- SMP Signals: Fix some SMP signal delivery logic. Was not handling
some critical sections correctly and was missing logic to signal
tasks running on other CPUs.
- SMP: Fix timer related issues: Round robin and sporadic
scheduling were only being performed for tasks running on the CPU
that processes the system timer interrupt. Similary, CPU load
measurements were only be processed for running on the CPU that
receives the sampling interrupt.
- sched_note: Fix spinlock instrumentation. From Masayuki Ishikawa.
- In all implementations of _exit(), use enter_critical_section() vs.
disabling local interrupts.
- sigtimedwait: When timer expires, up_unblock_task() is called.
This is okay in the single CPU case because interrupts are disable
in the timer interrupt handler. But it is insufficient in the SMP
case. enter_ and leave_critical_section() must be called in order
to manage spinlocks correctly.
- Fix a compile error: in sched_cpuload.c:Line136, the variables ts
and secs are not defined if CONFIG_CPULOAD_ONESHOT_ENTROPY = 0.
However, these variables are used regardless of
CONFIG_CPULOAD_ONESHOT_ENTROPY at lines~180:onwards. From Rajan Gill.
- CPU load: Correct computation of the nominal period to use when the
source is a oneshot timer.
- Cancellation points: Fix some backward logic in conditional
compilation.
- Remove an unused variable when calling sigwaitinfo() and
sigtimedwait(). From Masayuki Ishikawa.
* File System/Block and MTD Drivers:
- procfs: Correct to snprintf-related errors in fs_procfsproc.c.
Resolves issue #24.
- Add logic to VFS rename: If target of rename exists and is a
directory, then the source file should be moved 'under' the target
directory. POSIX also requires that if the target is a file, then
that old file must be deleted.
- Fix open() a block device with
CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y. From Masayuki Ishikawa.
- File System: Don't build block driver proxy if PSEUDOFS_OPERATIONS
are disabled.
- sendfile(): Fix error introduced with commit
ff73be870e38959b0aaee5961dc47b4b58dc2d86. Noted by Maciej W<>jcik.
* Graphics/Graphic Drivers:
- NxWM configurations. If using a 7-bit character set, then the
cursor character cannot be 137 (graphic block). Use 95
(underscore) instead.
- NX server: Correct message queue names. Should not be at /dev,
but rather relative to /var/mqueue.
* Common Drivers:
- MMCSD_SDIO: Only wait for card ejected if card detection is
supported. From Alan Carvalho de Assis.
- Typos withim mtd/ with Macronix MX25L. In
NuttX/drivers/mtd/Make.defs letters X between M and 25 are
missing. Noted by Oleg Evseev.
- USBMSC: Always set LUN readonly flag. From Wolfgang Rei<65>negger.
- drivers/lcd: ssd1306_configspi() must have global scope.
- MMC/SD SDIO: Some drivers need to start DMA before sending CMD24
and some AFTER. From Alan Carvalho de Assis.
- drivers/tone.c: Handle configuration with multiple PWM channels.
This resolves issue #30: Audio Tone Generator and PWM Multiple
Output Channel options.
- drivers/tone.c: 50% duty needs to be expressed a a fixed precision
number.
- drivers/spi/Kconfig: There is too much SPI in the configuration
menu; SPI Driver Support menu is empty. From Maciej W<>jcik.
- option to enable Memory Card debug output was hidden with SD cards
connected through SPI. From Maciej W<>jcik.
- usbhost_cdcacm: fix tx outbuffer overflow and remove now invalid
assert. From Janne Rosberg.
* Networking/Network Drivers:
- Networking: Fixed some issues that prevented IPv6 from working with
IPv4 enabled. From Pascal Speck.
- Networking: fixed a nullptr-dereference on iob_clone. From Pascal
Speck.
- Ethernet: Need two work structures (minimum) in all Ethernet
drivers so that pending poll work is not lost when an interrupt
occurs.
* ARMv7-R:
- I found an issue inside the cp15_coherent_dcache function: The
"mcr CP15_BPIALLIS(r0)" should only be used with SMP
configurationa. In non-SMP configuration this instruction could
become undefined. From Manohara HK.
* Atmel SAM3/4 Drivers:
- SAM3/4: GPIO bit numbering typo fixes. From Wolfgang Rei<65>negger.
* Atmel SAM3/4 Boards:
- Add missing sched_note_*() calls in sam4cm SMP functions.
* NXP/Freescale Kinetis:
- Kinetis: Fixed wrong MCG VDIV calculation on new NXP K60. From
Maciej Skrzypek.
- Kinetis: Need to set HAVE_UART_DEVICE when UART4 is selected. From
Maciej Skrzypek.
- Kinetis MCG: Wrong FRDIV set in MCG_C1. From Maciej Skrzypek.
* NXP/Freescale Kinetis Drivers:
- Kinetis Serial: Fixed compile error when UART5 is selected. From
Maciej Skrzypek.
- Kinetis SDHC - Enable clock after selected. From David Sidrane.
- Kinetis: Correct some SPI and I2C configuration issues. From
David Sidrane.
- Kinetis Ethernet: Add #define for number of loops for auto
negotiation to complete. From Marc Recht<68>.
- Kinetis Werial: Fixed up_rxint - did not disable the RX
interuppts. There was an OR where and AND NOT was needed. From
David Sidrane.
* NXP/Freescale LPC43xx:
- LPC43 pinset definitions: Add more 1 bit to pinset to reach
SFSCLK0-SFSCLK3. Remove PINCONFIG_DIGITAL. From Alan Carvalho de
Assis.
* NXP/Freescale LPC43xx Drivers:
- LPC43 serial: Correct conditional logic that selects /dev/ttySN.
Problem noted by Alan Carvalho de Assis.
* NXP/Freescale i.MX6:
- i.MX6: Fix clearing GPT status register. From Masayuki Ishikawa.
* STMicro STM32:
- STM32, STM32L4 Oneshot: Fix logic so that it can support multiple
oneshot timers.
- STM32 F7: Added missing ARCH_HAVE_RESET for F7. From David Sidrane.
- STM32: Add missing STM32_BKP_BASE. From David Sidrane.
- STM32 and STM32F7: Fixes the BKP reference counter issue. From
David Sidrane.
* STMicro STM32 Drivers:
- Fix for SAMv7 SPI: DLYBS value was calculated, but never written to
any registers. This led to incorrect timings on the bus. From
Michael Spahlinger.
- STM32 QEncoder: Fix QEncoder driver, based on STM32L4 driver. From
Alan Carvalho de Assis.
- STM32 QEncoder: Enable clocking to the timer on QE setup; disable
clock on QE teardown.
- STM32 Ethernet: Need two work structures so that pending poll work
is not lost when an interrupt occurs. This change has also been
ported to all all other effected Ethernet drivers.
- STM32 OTGHS host: stm32_in_transfer() fails and returns NAK if a
short transfer is received. This causes problems from class
drivers like CDC/ACM where short packets are expected. In those
protocols, any transfer may be terminated by sending short or NUL
packet. From Janne Rosberg. Adapted Janne Rosberg's patch to
STM32 OTGHS host to OTGFS host, and to similar USB host
implementations for STM32 L4 and F7.
* STMicro STM32 Boards:
- STM32F4 Discovery: Fix issues with QEncoder support. From Alan
Carvalho de Assis.
* C Library/Header Files:
- Add debug assertion in libdtoa to catch attempts to use floating
point output formats from within an interrupt handler. That will
cause assertions or crashes downstream because __dtoa will attempt
to allocate memory. From Pierre-noel Bouteville.
- libc: Fix ARMv7-A/R memcpy assembly.
- Fix return value if x is NaN. From Aleksandr Vyhovanec.
* apps/nshlib:
- NSH: Eliminate a warning when all memory inspection commands are disabled.
* apps/graphics:
- apps/graphics/traveler/tools: Fix linkage issue. The -lm should
come after -o binname. From Alan Carvalho de Assis.
* apps/netutils:
- The CONFIG_NETUTILS_HTTPD_PATH constant is used by httpd_mmap.c and
httpd_sendfile.c but It was not present in Kconfig menu. From
Maciej W<>jcik.
* apps/examples:
- Configurations that enable OSTEST must not disable signals.
- apps/examples/ostest: Was ignoring
CONFIG_EXAMPLES_OSTEST_FPUTESTDISABLE.
- In apps/examples/mtdpart/mtdpart_main.c where
CONFIG_EXAMPLES_MTDPART_NPARTITIONS defining is checked should be
#ifndef instead of #ifdef. Noted by Oleg Evseev.
NuttX-7.21 Release Notes
------------------------
The 121st release of NuttX, Version 7.21, was made on June 6, 2017,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.21.tar.gz and
apps-7.21.tar.gz. These are available from:
https://bitbucket.org/nuttx/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- pthread rwlocks: Add an implementation for read/write locks
(rwlocks) into the pthread library. These locks are writer
priority, such that if any writers come in they are given priority
for writing. From Mark Schulte.
- pthread robust mutexes: Implement robust mutex support:
pthread_mutex_lock() and trylock() will return EOWNERDEAD if the
mutex is locked by a thread that no longer exists. Add
pthread_mutex_consistent() to recover from this situation. Keep
list of all mutexes held by a thread in a list in the pthread's TCB.
When pthread exits or is cancelled, mutexes held by thread are
marked inconsistent and the highest priority thread waiting for the
mutex is awakened. There is a configuration option to (a) support
only robust mutexes, (b) support only traditional unsafe mutexes,
or (c) Support both unsafe and robust mutexes via
pthread_mutexattr_get/setrobust().
- pthread cancellation points: Add logic to disable cancellation
points within the OS. This is useful when an internal OS function
that is NOT a cancellation point calls an OS function which is a
cancellation point. In that case, irrecoverable states may occur if
the cancellation is within the OS. From Juha Niskanen.
- clock: Add clock_resynchronize and use subseconds RTC. Add
clock_resynchronize for better synchronization of CLOCK_REALTIME and
CLOCK_MONOTONIC to match RTC after resume from low-power state. Add
up_rtc_getdatetime_with_subseconds under
CONFIG_ARCH_HAVE_RTC_SUBSECONDS to allow initializing (and
resynchronizing) system clock with subseconds accuracy RTC. From
Jussi Kivilinna.
- clock: Add new type ssystime_t for relative 64-bit ticks, change
ticks<->time conversion functions to use ssystime_t. From Jussi
Kivilinna.
- clock: Add testing for 32-bit overflow of 64-bit system timer. From
Jussi Kivilinna.
* File Systems/Block and MTD Drivers
- drivers/mtd/w25.c: Erase sector only if it is not in erased state.
From Jussi Kivilinna.
* Graphics/Display Drivers:
- drivers/lcd: Extend st7565 driver to include support for the
AQM_1248A. From Masayuki Ishikawa.
- drivers/lcd: Add driver for Nokia 5110 (Philips PCD8544). From Alan
Carvalho de Assis.
* Networking/Network Drivers:
- Extensive modifications to support wireless network (see below).
- TUN driver: Implement TAP (OSI layer 2) mode. Enable by setting the
IFF_TAP flag instead of the IFF_TUN flag in ifr_flags. From Thomas
Keh.
- Add user-space networking stack API (usrsock). User-space
networking stack API allows user-space daemon to provide TCP/IP
stack implementation for NuttX network. Main use for this is to
allow use and seamless integration of HW-provided TCP/IP stacks to
NuttX. For example, user-space daemon can translate /dev/usrsock
API requests to HW TCP/IP API requests while rest of the user-space
can access standard socket API, with socket descriptors that can be
used with NuttX system calls. From Jussi Kivilinna.
- net/: Network driver now retains Ethernet MAC address in a union so
that other link layer addresses may be used in a MULTILINK
environment.
* Wireless Networking/Wireless Drivers:
- BCM43362: Support for Broadcom's BCM43362 WiFi chip was contributed
by Simon Piriou as part of the port of the Particle Photon board.
Only station functionality is available at present. This work
includes not on the WiFi driver, but the support Particle Photon
board, the infrasture for IEEE 802.11 FullMAC networking including
the network device interface, WiFi configuration, AP scanning and
authentication and association with an AP.
- IEEE 802.11 networking tools and support.
- IEEE 802.15.4 MAC support. This is an effort that was started some
time back by Sebastien Lorquet (with some help from Matte Poppe).
Recently, Anthony Merlino has taken on this effort and has made
some significant progress. Using the Microchip MRF24J40 module with
the Mikroe Clicker2-STM32 board along with a PC-based IEEE 802.15.4
sniffer, Anthonly has verified correct transmittion and receipt of
basic frames.
- Microchip MRF24J40: As mentioned above, this IEEE 802.15.4 radio
driver is now basically functional.
- IEEE 802.15.4 Network Driver: A driver that interfaces the NuttX
network with the IEEE 802.15.4 MAC has been developed but is still
incomplete and has not been verified.
- IEEE 802.15.4 Network Loopback Driver: A simple IEEE 802.15.4 MAC
loopback driver was developed. This driver allowed for parallel
development of the IEEE 802.15.4 MAC and 6LoWPAN.
- 6LoWPAN: The Contiki 6LoWPAN stack has been ported so that works
within the NuttX networking framework and interfaces with the new
IEEE 802.15.4 MAC via the network driver. Live testing with
IEEE 802.15.4 radios has not yet been done; all testing has used
the loopback driver. There are no known problems and the stack
is ready for additional testing.
- Add option to enable wireless debug output.
* Other Common Device Drivers:
- Add entropy pool and strong random number generator. Entropy pool
gathers environmental noise from device drivers, user-space, etc.,
and returns good random numbers, suitable for cryptographic use.
Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm
for CSPRNG output. Patch also adds /dev/urandom support for using
entropy pool RNG and new 'getrandom' system call for getting
randomness without file-descriptor usage (thus avoiding file-
descriptor exhaustion attacks). The 'getrandom' interface is similar
as 'getentropy' and 'getrandom' available on OpenBSD and Linux
respectively. From Jussi Kivilinna.
- XBox One controller: Adds USB host driver support for the XBox One
controller. Currently only the latest version (XBox One X)
controller works. The older XBox One controllers do not enumerate
correctly. From Brian Webb.
- drivers/analog: Add basic COMP driver. From Mateusz Szafoni.
- drivers/analog: Add driver for the LTC1767L ADC. From Martin
Lederhilger.
- drivers/analog: Add basic OPAMP driver. From Mateusz Szafoni.
- drivers/sensors: Add driver for ST HTS221 humidity sensor. From
Juha Niskanen.
- drivers/sensors: Add driver for ST LPS25H pressure sensor. From
Juha Niskanen.
- drivers/sensors: Add driver for ST LIS2DH accelerometer. From Timo
Voutilainen.
- drivers/usbmisc: Add driver for Fairchild FUSB301 USB type-C
controller. From Harri Luhtala.
- RTC: Add interface for check if RTC time has been set. New
interface allows checking if RTC time has been set. This allows to
application to detect if RTC has valid time (after reset) or should
application attempt to get real time by other means (for example, by
launching ntpclient or GPS). From Jussi Kivilinna.
- Buttons: Change return value of board_buttons() and the type of
btn_buttonset_t to uint32_t so that more than 8 buttons can be
supported.
- drivers/syslog: Use monotonic clock for timestamp when available.
From Jussi Kivilinna.
- SPI: Add an instance argument to the SPIDEV definitions. Thus,
instead of specifying a FLASH device, for example, as SPI_FLASH, you
would now use SPI_FLASH(0) where the "instance" argument now
distinguishes multiple FLASH devices on the same SPI bus. From
Sebastien Lorquet.
- IOBs: Move from net/iob to a better location in mm/iob where they
can be shared outside of the networking logic. Current also used
by IEEE 802.15.4 MAC and by syslog (when buffering enabled).
- syslog: Add option to buffer SYSLOG output to avoid interleaving.
Uses new shareable IOBs. Additional logic to assure that the the
write from the buffer is a single atomic write in normal debug
output.
- drivers/can: Move CAN subsystem to its own directory and put device
drivers there. From Alan Carvalho de Assis.
- drivers/can: Add Microchip MCP2515 CAN Bus controller driver. From
Alan Carvalho de Assis.
- drivers/audio: Add cs43l22 audio driver. From Taras Drozdovsky.
- drivers/input: Add Cypress MBR3108 CapSense touch button driver.
From Juha Niskanen.
* Simulation
- configs/sim/sixlowpan: Configuration for testing the 6LoWPAN with
the IEEE 802.15.4 loopback network driver.
* Infineon XMC4xxx:
- arch/arm/src/xmc4: Initial, partial support for Infineon XMC4xxx.
* Infineon XMC4xxx Boards:
- XMC4500 Relax: Add basic board support infrastructure of Infineon
XMC4500 Relax Lite v1. Basic serial, LED, and button button support
for a simple NSH configuration. There are still stome remaining
issues with serial communications.
* MicroChip PIC32MX Boards:
- pic32mx7mmb: Add support for the Pinquino toolchain.
- pic32mx7mmb: Add support for PROCFS file system.
* NXP Freescale Kinetis:
- Kinetis: Allow board to add pullups on SDHC lines. From David
Sidrane.
- Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock
configuration. From David Sidrane.
* NXP Freescale Kinetis Drivers:
- Kinetis: Add Timer PWM Module (TPM) to K66 chip. From David
Sidrane.
- Kinetis: Added HW flow control and termios. From David Sidrane.
- Kinetis: Add ARCH_HAVE_I2CRESET. From David Sidrane.
* NXP Freescale LPC43xx:
- Add support for LPC4337FET256. From Andreas Bihlmaier.
* STMicro STM32:
- Change STM32 tickless to use only one timer. From Konstantin
Berezenko.
- STM32 F7: Add support for LSE RTC and enable RTC subseconds. From
Jussi Kivilinna.
- STM32 L1: stm32l15xx_rcc: Add support for using MSI as system
clock. From Juha Niskanen.
- STM32 L1: stm32l15xxx_rcc: configure medium performance voltage
range and zero wait-state when allowed by SYSCLK setting. Zero
wait-state for flash can be configured when: (1) Range 1 and
SYSCLK <= 16 Mhz, (2) Range 2 and SYSCLK <= 8 Mhz, or (3) Range 3
and SYSCLK <= 4.2 Mhz. Medium performance voltage range (1.5V)
can be configured when SYSCLK is up to 16 Mhz and PLLVCO up to
48 Mhz. From Juha Niskanen.
- STM32 F0: Add basic support for STM32F0. From Alan Carvalho de
Assis.
- STM32 F0: Add basic support for STM32F07x family.
- STM32 L1: stm32l15xx_rcc: Allow board to configure HSE clock in
bypass-mode. Allows using MCO output from ST-link chip (on Nucleo
and Discovery boards) as HSE input. From Juha Niskanen.
- STM32 L1: Add support for STM32L152CC, STM32L152RC and STM32L152VC.
From Juha Niskanen.
- STM32 F0: Add support for HSI48.
- STM32 L4: Add support for the STM32L496XX family. From Juha
Niskanen.
- STM32 L4: modularize Kconfig to support different product
lines/families. This is modeled after STM32F7. Idea is to declare
each chip in Kconfig but allow for flash size override. Commit adds
many STM32L4_HAVE_XXX feature test macros. From Juha Niskanen.
- STM32 L4: Separate SYSCFG into product line specific files for
clarity. From Juha Niskanen.
- STM32 L4: Add support for many new MCUs from the STM32L4X3XX
product line. From Juha Niskanen.
- STM32 L4: Add dbgmcu header files. From Juha Niskanen.
- STM32 F410: Add support for STM32F410. STM32F410 is a version of
STM32F4 with 32 KB of RAM and 62 or 128 KB of flash. From Gwenhael
Goavec-Merou.
* STMicro STM32 Drivers:
- SDIO: Extensions to support the SDIO interface to the BCM43362 from
Simon Piriou.
- STM32 F2: Add USB OTG HS support for stm32f20xxx cores. From Simon
Piriou.
- STM32 F2, F4, and F7: Add BOARD_DISABLE_USBOTG_HSULPI flag. From
Simon Piriou.
- STM32 F33: Move DMA logic to a separate files + add ADC support.
From Mateusz Szafoni.
- STM32 F3: Add COMP support. From Mateusz Szafoni.
- STM32 F33: Support for COMP character driver. From Mateusz Szafoni.
- STM32 F4: Implement DMA support for the STM32F4 I2C. From Rajan Gill.
- STM32 F7: Add stm32 RNG support. This is copied from stm32l4.
Tested on STM32F746ZG board. From Juha Niskanen.
- STM32 L1: Add STM32L162VE to chip.h. From Juha Niskanen.
- STM32 F4: Add I2C3 SDA pin mapping for STM32F411. From no1wudi.
- STM32 L1: stm32_flash: Add EEPROM writing for STM32L15XX. From
Juha Niskanen.
- STM32 F7: Serial: Add interface to get uart_dev_t by USART number,
stm32_serial_get_uart. From Jussi Kivilinna.
- STM32 F4: Provide TIM5 definition for STM32F429. From Matias v01d.
- STM32 F0: Add an untested port of the F1 USB device to the STM32F0.
- STM32 F0: Add support for the STM32F09X family. From Juha
Niskanen.
- STM32 F0: Initial cut at I2C driver. Still a work in progress.
From Alan Carvalho de Assis.
- STM32 F33: Add OPAMP support. From Mateusz Szafoni.
- STM32 L4: stm32l4_i2c: Add I2C4 code. From Juha Niskanen.
- STM32 L4: Add GPIO_PORTI definition. From Juha Niskanen.
- STM32 F7 Serial: Allow configuring Rx DMA buffer size. From Jussi
Kivilinna.
- STM32 L4: Firewall for stm32l4x3xx. Not tested for any product
family, but now it at least compiles. L496 devices can have one bit
wider Volatile Data Segment. From Juha Niskanen.
- STM32 TIM: Add method to get timer width. Freerun timer: Use timer
width to get the correct clock rollover point.
- STM32 L4: Add internal flash write support. From Juha Niskanen.
- STM32 L4: Port stm32l4_serial_get_uart function from STM32F7. From
Juha Niskanen.
- STM32 Ethernet: Add support for KSZ8081 PHY interrupts. From
Sebastien Lorquet.
- STM32 F4: Add I2S driver. From Taras Drozdovsky.
- STM32 L4: Add IWDG peripheral. This is the same as for STM32
except that prescale and reload can be changed after watchdog has
been started, as this seems to work on L4. From Juha Niskanen.
- STM32 F7: Add SPI DMA support. From Jussi Kivilinna.
* STMicro STM32 Boards:
- Support for the Particle Photon board was contributed by Simon
Piriou. The Photon board is based on a STM32F205G MCU with and on-
board BCM43362 WiFi chip that interfaces via the STM32's SDIO
interface. Board configuration support includes, in addition,
buttons, LEDS, IWDG, USB OTG HS, and procfs support. Configurations
available for nsh, usbnsh, and wlan configurations.
- Clicker2-STM32: Support for the Mikroelektronika Clicker 2 for
STM32 was added by Anthony Merlino. This board, along with the
MRF24J40 Click board is the platform used to deveop the IEEE
802.15.4 support. The boad configuration includes the MRF24J40
intialization logic and SPI support. Configurations exist for nsh,
knsh, usbnsh, and mrf24j40-radio.
- Nucleo_F334R8: Add ADC example. From Mateusz Szafoni.
- Nucleo-F334R8: Add COMP support. From Mateusz Szafoni.
- Nucleo-F334R8: Use new COMP driver. From Mateusz Szafoni.
- Adds USB host support to stm32f411-disco board. From Brian Webb.
- Add stm32f0discovery board support. From Alan Carvalho de Assis.
- Nucleo-F072RB: Add board configuration.
- Nucleo-F334R8: Add OPAMP support. From Mateusz Szafoni.
- Nucleo-F072RB: Add support for the I2C driver used by I2C tools.
- Nucleo-L496ZG: Add nucleo-l496zg board files. From Juha Niskanen.
- Nucleo-F091RC: Add nucleo-f091rc board files. From Juha Niskanen.
- Nucleo-L432KC: Add nucleo-l432kc board files. From Sebastien
Lorquet.
- Nucleo-L452RE: Add nucleo-l452re board files. From Juha Niskanen.
- stm32f103-miniumum: Add board support to use the Nokia 5110
LCD display driver. From Alan Carvalho de Assis.
* C Library/Header Files:
- C library: Add strerror_r().
- C Library: Add wcstoull(), swprintf(), wcstod(), wcstof(), wcstol(),
wcstold(), wcstoul(), wcstoll() functions. Add mbsnrtowcs() and
wcsnrtombs() (just returning success). Add mbtowc() and wctomb() to
C++ std namespace. From Alan Carvalho de Assis.
- C Library: Add ffsl(), ffsll(), fls(), flsl(), flsll() and use
GCC's __builtin_ctz/__builtin_clz for faster implementation of these.
From Jussi Kivilinna.
- fixedmath: Add square root and b32_t conversion operators. From
Jussi Kivilinna.
- locale.h: Add a bogus definition of locale_t.
- C library: Versions mbrlen and mbsrtowcs taken and adapted from
FreeBSD code (at https://github.com/freebsd/freebsd/). From Matias
v01d.
* Build/Configuration System:
- Include C++ library in 'make export'. From Alan Carvalho de Assis.
- configs: Remove all setenv.sh and setenv.bat files. Remove all
references to setenv.sh and setenv.bat from all config README files.
- Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that
the toolchain is based on GNU gcc/as/ld. This is in addition to the
CPU-specific versions of the same definition.
- Move prototype for up_cxxinitialize() from nuttx/include/nuttx/arch.h
to apps/include/platform/cxxinitialize.h.
* Tools:
- Add initialconfig.c so that perhaps in the future we will be able to
use this to generate a new configuration from scratch (rather than
having to derive new configurations from existing configurations).
NOTE: Not yet intregated into the build system.
* NSH: apps/nshlib:
- Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>]. Set the
'exit on error control' and/or 'print a trace' of commands when
parsing scripts in NSH. The settinngs are in effect from the point
of exection, until they are changed again, or in the case of the init
script, the settings are returned to the default settings when it
exits. Included child scripts will run with the parents settings and
changes made in the child script will effect the parent on return.
Use 'set -e' to enable and 'set +e' to disable (ignore) the exit
condition on commands. The default is -e. Errors cause script to
exit. Use 'set -x' to enable and 'set +x' to disable (silence)
printing a trace of the script commands as they are ececuted. The
default is +x. No printing of a trace of script commands as they are
executed. From David Sidrane.
- Print expanded variables if -x. From David Sidrane.
- ifconfig command: Extend ifconfig to support 6LoWPAN. Adapt to
some changes in configuration variable usage.
- Network initialization: If IEEE802.11 selected use wlan0 instead of
eth0 for network device name.
- Network initialization: NSH now has configuration options to select
the wireless properties. It builds the configuration structure and
passes this to wpa_driver_wext_associate() so that it will set the
network as configured.
- Network initialization: Add a new option CONFIG_NSH_NETLOCAL that
will suppress some built in operations and will support manual
configuration of a wireless network through command line tools.
* Examples/Tests: apps/examples:
- examples/xbc_text: Adds a test program for the XBox One controller
driver. From Brian Webb.
- examples/ostest: Add a test of robust mutexes.
- examples/ostest: Add tests for pthread_rwlock. Adding tests to be
used to verify the pthread_rwlock lock works. From Mark Schulte.
- examples/ostest: Additional test for rwlock and one for cancel
cleanup handlers. From Juha Niskanen.
- examples/usrsocktest: Add application for USRSOCK testing. From
Jussi Kivilinna.
- examples/nettest: Adapt for use in testing 6LoWPAN.
- examples/nettest: If doing loopback, but not using the official
loopback device, then use the server should use the configured client
IP address.
- examples/udpblaster: Several fixes to work with 6LoWPAN.
- examples/udpblaster: Add logic to bind the local UDP socket to a
well-known address.
- examples/configdata: Add stacksize and priority. From Juha Niskanen.
* Network Utilies: apps/netutils:
- netutils/netlib: Add IEEE 802.11 wireless IOCTL wrappers.
- netutils/netlib: Add a helper function to convert a string to a
6LoWPAN node address.
- netlib and NSH: Add logic to get/set the IEEE802.15.4 PAN ID.
- netutils/dhcpc: Make the network device name a configuration
option. Was hardcoded to eth0 but may, instead, need to be wlan0.
- netutils/dhcpc: Remove hard-coded interface device. Now passed as
a parameter to dhcpc_open(). From Sebastien Lorquet.
* Wireless Utilies: apps/wireless:
- wireless/wapi: Port of Wapi wireless services. The original
depended on features not supported by NuttX: Removed logic that
depends on Linux netlink. Removed functionality that depended on
the Linux procfs: This includes only 1) listing of available
interfaces and 2) listing of all routes.
- wireless/wapi: Create command line Wapi application based on
Wapi sample code.
- wireless/wapi: wpa_driver_wext_associate() now accepts a
configuration parameter that can be used to specify the wireless
properties.
- wireless/wapi: Add basic wapi_event_stream_extract implementation.
From Simon Piriou.
- wireless/ieee802154: Add iwpan and i8sak tools. iwpan is similar
in concept to wapi. From Anthony Merlino (i8sak was originally
by Sebastien Lorquet).
- wireless/ieee802154/libmac: IEEE 802.15.4 MAC library.
- wireless/wext: Add drivers_wext from the WPA supplicant; Integrate
into NSH. From Simon Piriou.
* System Unitilities (apps/system)
- apps/system/dhcpc: Add a command to renew or establish a lease on an
IPv4 address.
- apps/system/ntpc: Add a command to start or stop the NTPC daemon.
- apps/system/ramtest: Make stacksize and priority conigurable.
* Platform-Specific Support (apps/platform)
- apps/platform: Create gnu/ subdirectory that contains the one and
only GNU C++ initialization function. Remove all other C++
initialization functions.
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- Priority inheritance: When CONFIG_SEM_PREALLOCHOLDERS==0, there is
only a single, hard-allocated holder structure. This is problem
because in sem_wait() the holder is released, but needs to remain in
the holder container until sem_restorebaseprio() is called. The call
to sem_restorebaseprio() must be one of the last things the
sem_wait() does because it can cause the task to be suspended. If in
sem_wait(), a new task gets the semaphore count then it will fail to
allocate the holder and will not participate in priority
inheritance. This fix is to add two hard-allocated holders in the
sem_t structure: One of the old holder and one for the new holder.
- Priority inheritance: sem_holder sem_findholder missing
inintalization of pholder. sem_findholder would fail and code
optimization covered this up. From David Sidrane.
- Partial Fix priority inheritance CONFIG_SEM_PREALLOCHOLDERS=0. From
David Sidrane.
- Priority inheritance: sem_boostholderprio prevent overrun of
pend_reprios. The second case rtcb->sched_priority <=
htcb->sched_priority did not check if there is sufficient space in
the pend_reprios array. From David Sidrane.
- lp_worker: Guard from pend_reprios overlow. From David Sidrane.
- Priority inheritance: Fixes improper restoration of base_priority in
the case of CONFIG_SEM_PREALLOCHOLDERS=0. The call to
sem_restorebaseprio_task context switches in the
sem_foreachholder(sem, sem_restoreholderprioB, stcb); call prior to
releasing the holder. So the running task is left as a holder as is
the started task. Leaving both slots filled thus failing to perform
the boost/or restoration on the correct tcb. This PR fixes this by
releasing the running task slot prior to reprioritization that can
lead to the context switch. To faclitate this, the interface to
sem_restorebaseprio needed to take the tcb from the holder prior to
the holder being freed. In the failure case where sched_verifytcb
fails it added the overhead of looking up the holder. There is also
the additional thunking on the foreach to get from holer to
holder->tcb. An alternate approach could be to leve the interface
the same and allocate a holder on the stack of sem_restoreholderprioB
copy the sem's holder to it, free it as is done in this pr and and
then pass that address sem_restoreholderprio as the holder. It could
then get the holder's tcb but we would keep the same sem_findholder
in sched_verifytcb. From David Sidrane.
- Priority inheritance: Fixes improper restoration of base_priority.
From David Sidrane.
- sem_holder: Indexing error. From David Sidrane.
if (sem->holder[0].htcb != NULL || sem->holder[**1**].htcb != NULL)
- realloc(): When realloc() has to fall back to calling malloc(), size
including overhead was being provided to malloc(), causing a slightly
larger allocation than needed. Noted by initialkjc@yahoo.com.
- scheduler: Fix tg_flags check with GROUP_FLAG_NOCLDWAIT. From Masayuki
Ishikawa.
- scheduler: Fix CHILD_FLAG_EXITED in include/nuttx/sched.h. From
Masayuki Ishikawa.
- binfmt/elf: Fix offset value when calling elf_read() in
elf_symname(). From Masayuki Ishikawa.
- binfmt/elf: Fix offset value when calling elf_read() in
elf_sectname(). From Masayuki Ishikawa.
- There can be a failure in IOB allocation to some asynchronous
behavior caused by the use of sem_post(). Consider this scenario:
(1) Task A holds an IOB.<2E> There are no further IOBs.<2E> The value of
semcount is zero. Task B calls iob_alloc().<2E> Since there are not
IOBs, it calls sem_wait().<2E> The value of semcount is now -1. (2)
Task A frees the IOB.<2E> iob_free() adds the IOB to the free list and
calls sem_post() this makes Task B ready to run and sets semcount to
zero NOT 1.<2E> There is one IOB in the free list and semcount is zero.
When Task B wakes up it would increment the sem_count back to the
correct value. (3) But an interrupt or another task runs occurs
before Task B executes.<2E> The interrupt or other tak takes the IOB off
of the free list and decrements the semcount.<2E> But since semcount is
then < 0, this causes the assertion because that is an invalid state
in the interrupt handler. So I think that the root cause is that
there the asynchrony between incrementing the semcount. This change
separates the list of IOBs: Currently there is only a free list of
IOBs. The problem, I believe, is because of asynchronies due
sem_post() post cause the semcount and the list content to become out
of sync. This change adds a new 'committed' list: When there is a
task waiting for an IOB, it will go into the committed list rather
than the free list before the semaphore is posted. On the waiting
side, when awakened from the semaphore wait, it will expect to find
its IOB in the committed list, rather than free list. In this way,
the content of the free list and the value of the semaphore count
always remain in sync.
- binfmt: Fix .dtor memory allocation. From Masayuki Ishikawa.
* File System/Block and MTD Drivers:
- SmartFS: If whence is SEEK_END, the file offset shall be set to the
size of the file plus offset. Noted by eunb.song@samsung.com.
- mtd/progmem: Fix incorrect target address calculation.
progmem_read/write() is incorrectly calculating the target address,
expecting the offset argument is given in a block number. This is
completely wrong and as a result invalid flash region is accessed.
Byte-oriented read/write interfaces of mtd device accept the target
address in a byte offset, not a block number. From Heesub Shin.
- procfs: Fix wrong member IDs are displayed when 'cat
/proc/<pid>/group/status'. From Nobutaka Toyoshima.
- procfs: Fix incorrect uptime with CONFIG_SYSTEM_TIME64. From
Masayuki Ishikawa.
- vfs/poll: round timeout up to next full tick. Calling poll() with
timeout less than half tick (thus MSEC2TICK(timeout) => 0) caused
returning error with EAGAIN. Instead of rounding timeout down, value
should be rounded up. Open Group spec for poll says:
"Implementations may place limitations on the granularity of timeout
intervals. If the requested timeout interval requires a finer
granularity than the implementation supports, the actual timeout
interval will be rounded up to the next supported value." From Jussi
Kivilinna.
- mtd/config: erase block between block read and write. From Juha
Niskanen.
- mtd: Build RAMTRON and AT45DB drivers only if selected. From Juha
Niskanen.
- mtd/config: Fix byte read interface test. From Juha Niskanen.
- mtd: Fix some unallocated and NULL pointer issues. rwb->wrflush and
rwb->wrmaxblocks in rwbuffer could get unallocated values from
ftl_initialize() in some configurations. Also fixes related assert:
up_assert: Assertion failed at file:rwbuffer.c line: 643
that can happen with the following configuration:
CONFIG_FTL_WRITEBUFFER=y
CONFIG_DRVR_WRITEBUFFER=y
# CONFIG_FS_WRITABLE is not set
These problems are caused by CONFIG variable differences between the
buffer layers. TODO: This is not a perfect solution. readahead
support has similar issues. From Juha Niskanen.
- net procfs: Fix buffer corruption and refactor netdev_statistics.c.
From Masayuki Ishikawa.
- FAT: Fix 'Missing unlock' in fs_fat32.c. From Masayuki Ishikawa.
- VFS fdopen: Add missing file stream flags clearing. Clear file
stream structure regardless of config options. Structure clearing is
needed as previous use of stream list entry might leave fs_flags
set. From Harri Luhtala.
- mtd/smart: Fix use of uninitialized variable. From Jussi Kivilinna.
- mtd/w25.c: Enable short delay after sector/chip erase. From Jussi
Kivilinna.
- mtd/config: Add some error checks for I/O errors. From Juha
Niskanen.
* Graphics/Graphic Drivers:
- net procfs: Some long lines were being generated that cause buffer-
related problems and corrupted output.
* Networking/Network Drivers:
- Fixed wrong assert on udp dgram send. From Pascal Speck.
- TCP/IPv6: Fix a compile issue when IPv6, but not IPv4 is enabled.
- net/socket/accept: Fix building with CONFIG_NET_LOCAL_STREAM. From
Jussi Kivilinna.
- Argument of network device IOCTL should be unsigned long, just as
will all other IOCTL methods.
- net/socket: Fix cloning of local and raw sockets. From Jussi
Kivilinna.
- TCP: Wait for 3-Way Handshare before accept() returns. From Simon
Piriou.
- TCP: Send RST if applicaiton 'unlistens()' before we complete the
connection sequence.
- TCP: An RST received during the 3-way handshake requires a little
more clean-up.
- IPv6: Fix net_ipv6_pref2mask(). From Masayuki Ishikawa.
- network IOCTL commands: The only place in net/netdev/netdev_ioctl.c
where the interface state should change is for SIOCSIFFLAGS. The
other ones .. SIOCSIFADDR, SIOSLIFADDR, SIODIFADDR .. should not
change the link state. From Sebastien Lorquet.
- TCP: Fix tcp_findlistner() in dual stack mode. From Masayuki
Ishikawa.
* Common Drivers:
- Fix as5048b by adding missing frequency parameter. From Andreas
Bihlmaier.
- multiple fixes in nrf24l01 driver: (1) signal POLLIN if there is
already data in the FIFO, (2) send ETIMEDOUT to userspace after 2
seconds if TX IRQ was not received, (3) handle FIFO overflow, (4)
handle invalid pipes/empty FIFO, and (5) multiple cosmetics (missing
static, duplicate define, missing \n). From Leif Jakob.
- input/mxt: Prevent overriding i2c transfer return value.
put_reg/get_reg function was overriding i2c transfer error code with
i2creset return value, that lead to OK status although actual
transfer failed. From Juha Niskanen.
- drivers/audio/wm8904: WM8904 has same problem as that fixed by Juha
Niskanen in the MaxTouch driver.
- UART 16550: Missing left parenthesis in function prototype. This is
Bitbucket Issue #41.
- USBMSC: Fix a wrong lun number issue. From Masayuki Ishikawa.
- drivers/i2c: Fix compile issues if CONFIG_DISABLE_PSEUDOFS_OPERATIONS
is enabled.
- drivers/serial: I discovered a problem in the file
drivers/serial/serial.c concerning the function uart_close(<28>). In the
case that a serial device is opened with the flag O_NONBLOCK the
function uart_close(<28>) blocks until all data in the buffer is
transmitted. The function close(<28>) called on an handle opened with
O_NONBLOCK should not block. The problem occurred with a CDC/ACM
device. From Stefan Kolb.
- drivers: Fix some bad NULL checks. From Juha Niskanen.
- drivers: Rename newly introduced up_i2creset to I2C_RESET. From
Juha Niskanen.
- drivers/bch: BCH character driver bch_ioctl() always returns -ENOTTY
for DIOC_GETPRIV command. It should returns OK if DIOC_GETPRIV
command succeeds. From EunBong Song.
- Replace sprintf() with snprintf() in pipe.c. From Nobutaka Toyoshima.
- drivers/bch: Fix 'Missing Unlock' in bchdev_driver.c. From Masayuki
Ishikawa.
- button_upper: Fix interrupt enabling for poll-events. From Jussi
Kivilinna.
- drivers/{sensors,usbmisc}: Fix uninitialized I2C frequency. From
Juha Niskanen.
* ARM:
- Set EABI stack alignment for all ARM architectures (remove OABI
code). From David Cabecinhas.
- Remove redundant interrupt stack coloring and OABI code. From David
Cabecinhas.
- Fix off-by-one interrupt stack allocation in 8-byte aligned
architectures. From David Cabecinhas.
* ARMv6-M:
- CONFIG_DEBUG_HARDFAULT should be available for Cortex-M0 too.
* Microchip/Atmel SAM3/4 Drivers:
- SAM3/4: Fixed configurations for TWI master. Obviously an
incomplete port from SAMA5.
* Microchip/Atmel SAMv7 Drivers:
- SAMV7: Watchdog: Fix Forbidden Window Value. According the Datasheet
the WDD Value is the lower bound of a so called Forbidden Window and
to disable this we have to set the WDD Value greater than or equal to
the WDV Value. This seems to be a bug in the datasheet. It looks
like we have to set it to a greater value than the WDV to really
disable this Thing. When triggering the Watchdog faster than the
(very slow) clock source of the Watchdog fires, this Forbidden Window
Feature resets the System if WDD equals to WDV. This Changeset
disables the Forbidden Window by setting the WDD Value to the Maximum
(0xfff) Value possible. From Frank Benkert.
- SAMV7 EMAC: Add conditional logic to account the fact that the
SAMV71 has 6 rather than 3 queues after version 1. From Ian McAfee.
* NXP/Freescale Kinetis Drivers:
- Kinetis: Fixed GPIO _PIN_OUTPUT_LOWDRIVE swapped with
_PIN_OUTPUT_OPENDRAIN. From David Sidrane.
- Ensure interrupts are back on BEFORE running code dependant on
clock_systimer. From David Sidrane.
- Kinetis k66, k64, k60, k40, k20: Pin mux configure all I2C signals as
Open Drain. The output structure of the GPIO for I2C needs to be
open drain. When left at the default, one can observe on a scope the
slave contending with the push-pull during the ACK. From David
Sidrane.
- Kinetis K66: Fixed TMP2_CH1 definition. From David Sidrane.
- Kinetis K66: Define ALT1 to match ref manual. From David Sidrane.
- Kinetis K66: GPIO and pin mux cleanup. From David Sidrane.
- Kinetis ADC: Various corrections and updates. From David Sidrane.
* NXP/Freescale LPC43xx:
- Add missing PINCONF_INBUFFER in several places of
lpc4310203050_pinconfig.h. From Andreas Bihlmaier.
- Fix logic in preprocessor checks and correct arguments to
lpc43_pin_config initialization. From Andreas Bihlmaier.
* NXP/Freescale LPC43xx Drivers:
- Fix logic error in lpc43_adc. From Andreas Bihlmaier.
- Use correct macro for irqid (fortunately both point to
LPC43_IRQ_EXTINT+18). From Andreas Bihlmaier.
- Actually write modified value to register. From Andreas Bihlmaier.
- Increase number of supported PWM channels from 4 to 6. From Andreas
Bihlmaier.
* Silicon Labs EFM32 Drivers:
- EFM32 I2C: Fix timeout calculation. From Masayuki Ishikawa.
* STMicro STM32:
- As discovered by dcabecinhas. This fix assume the 8 byte alignment
options for size stack size or this will overwrite the first word
after TOS. See
https://github.com/PX4/Firmware/issues/6613#issuecomment-285869778.
From David Sidrane.
- STM32 F7: In stm32_allocateheap.c There are 5 not 4 configurations.
From David Sidrane.
* STMicro STM32 Drivers:
- STM32, STM32 F7, STM32 L4: OTG host drivers: Do not do data toggle
if interrupt transfer is NAKed. Sugested by webbbn@gmail.com.
- Save elapsed time before handling I2C in stm32_i2c_sem_waitstop().
This change follows the same logic as in previous fix to
stm32_i2c_sem_waitdone(). It is possible that a context switch
occurs after I2C registers are read but before elapsed time is saved
in stm32_i2c_sem_waitstop(). It is then possible that the registers
were read only once with "elapsed time" equal 0. When scheduler
resumes this thread it is quite possible that now "elapsed time" will
be well above timeout threshold. In that case the function returns
and reports a timeout, even though the registers were not read
"recently". Fix this by inverting the order of operations in the loop
- save elapsed time before reading registers. This way a context
switch anywhere in the loop will not cause an erroneous "timeout"
error. From Freddie Chopin.
- STM32, STM32 F7, and STM32 L4: Clone Freddie Chopin's I2C change to
similar STM32 I2C drivers. From David Sidrane.
- STM32: OTG host implementations of stm32_in_transfer() must obey the
polling interval for the case of isochronous and interrupt endpoints.
- STM32: Fix erase sector number for microcontrolers with more than 11
sectors. Erase a sector from the second bank cause the bit 4 of SNB
being set but never unsed, so trying to erase a sector from the first
bank was acually eraseing a sector from the second bank. From Jos<6F>
Roberto de Souza.
- STM32: Make up_progmem thread safe. Writing to a flash sector while
starting the erase of other sector have a undefined behavior so lets
add a semaphore and syncronize access to Flash registers. But for
the semaphore to work it needs to be initialized so each board needs
call stm32_flash_initialize() on initialization, so to avoid runtime
problems it is only using semaphore and making it thread safe if
initialized, after all boards starts to call stm32_flash_initialize()
we can remove the boolean and the check. From Jos<6F> Roberto de Souza.
- STM32: Add workaround for flash data cache corruption on
read-while-write. This is a known hardware issue on some STM32 see
the errata of your model and if you make use of both memory banks you
should enable it. From Jos<6F> Roberto de Souza.
- STM32 Flash fixes. From Jos<6F> Roberto de Souza.
- STM32 Flash: Missing unlock on F1 HSI off path. From David Sidrane.
- STM32 F4 I2C: I needed to use DS3231,<2C>I remember<65>that<61>in past it
worked ok, but now for stm32f4xx is used another driver (chip
specific,<2C>stm32f40xxx_i2c.c) and DS3231 driver doesn't work. After
investigating a problem I found that I2C driver (isr routine) has a
few places there it sends stop bit even if not all messages are
managed. So, e.g., removing stm32_i2c_sendstop (#1744) and adding
stm32_i2c_sendstart after data reading helps to make DS3231 working.
From Alexander Oryshchenko; verified by David Sidrane.
- STM32 F7 Serial: Serial fix for dropped data: (1) Revert the
inherited dma bug from the stm32. see
https://bitbucket.org/nuttx/nuttx/commits/df9ae3c13fc2fff2c21ebdb098c520b11f43280d
for details. And (2) Most all CR1-CR3 settings can not be configured
while UE is true. Threfore we make all operation atomic and disable
UE and restore it's originalstate on exit. From David Sidrane.
- STM32 L1: Fix IWDG and WWDG debug mode stop for STM32L15XX. From
Juha Niskanen.
- STM32 F7: Fix UART7 and UART8 IFLOWCONTROL options. From Jussi
Kivilinna.
- STM32 F7: Add warning for RXDMA + IFLOWCONTROL combination.
Combination of RXDMA + IFLOWCONTROL does not work as one might
expect. Since RXDMA uses circular DMA-buffer, DMA will always keep
reading new data from USART peripheral even if DMA buffer underruns.
Thus this combination only does following: RTS is asserted on USART
setup and deasserted on shutdown and does not perform actual RTS
flow-control. Data loss can be demonstrated by doing long up_mdelay
inside irq critical section and feeding data to RXDMA+IFLOWCONTROL
UART. From Jussi Kivilinna.
- STM32 F7 Serial: Do not stop processing input in SW flow-control
mode. From Jussi Kivilinna.
- STM32 L4 DMA: Correct bad channel definition. From Sebastien Lorquet.
- STM32 F7: Warn if no DMA2 configured when using ADC with DMA. Also
correct ADC channel numbers that DMA callback passes to upper half
driver. From Juha Niskanen.
- STM32 F7 ADC: Do not override ADCPRE_DIV when measuring
internal voltage. From Juha Niskanen.
- STM32 L4: Don't think these chips have DPFPU, DTCM or ITCM. From
Juha Niskanen.
- STM32 F7 Flash: macro naming errors, there is no FLASH_CONFIG_F for
F7. From Juha Niskanen.
- STM32 L4: stm32l4x6xx_pinmap: Update I2C4 and DCMI pins. From Juha
Niskanen.
- STM32 L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED. From
Juha Niskanen.
- Fix STM32F7 I2C interrupt handler. From Jussi Kivilinna.
- STM32: Serial Allow configuring Rx DMA buffer size. From David
Sidrane.
- STM32 CAN: I had the problem that the transmit FIFO size (= actual
elements in FIFO) was slowly increasing over time, and was full after
a few hours. The reason was that the code hit the line
"canerr("ERROR: No available mailbox\n");" in stm32_cansend, so
can_xmit thinks it has sent the packet to the hardware, but actually
has not. Therefore the transmit interrupt never happens which would
call can_txdone, and so the size of the FIFO size does not decrease.
The reason why the code actually hit the mentioned line above, is
because stm32can_txready uses a different (incomplete) condition than
stm32can_send to determine if the mailbox can be used for sending,
and thus can_xmit forwards the packet to stm32can_send.
stm32can_txready considered mailboxes OK for sending if the mailbox
was empty, but did not consider that mailboxes may not yet be used if
the request completed bit is set - stm32can_txinterrupt has to
process these mailboxes first. Note that I have also modified
stm32can_txinterrupt - I removed the if condition, because the CAN
controller retries to send the packet until it succeeds. Also if the
condition would not evaluate to true, can_txdone would not be called
and the FIFO size would not decrease also. From Lederhilger Martin.
- STM32 Serial: Fix freezing serial port. Serial interrupt
enable/disable functions do not disable interrupts and can freeze
device when serial interrupt is received while execution is at those
functions. Trivially triggered with two or more threads write to
regular syslog stream and to emergency stream. In this case, freeze
happens because of mismatch of priv->ie (TXEIE == 0) and actually
enabled interrupts in USART registers (TXEIE == 1), which leads to
unhandled TXE interrupt and causes interrupt storm for USART. From
Jussi Kivilinna.
- STM32 I2C: Make private symbols static. From Juha Niskanen.
- STM32 L4 GPIO: Put back EXTI line source selection. From Juha
Niskanen.
- STM32 L4 RTC: Store RTC MAGIC to backup reg, not to address zero.
From Juha Niskanen.
* STMicro STM32 Boards:
- Disable serial console on stm32f103-minimum usbnsh example project
config. Devices enumerate after this change. From Bob Ryan.
- Nucleo-144: Default for choice in Kconfig was not one of the
possible choices.
- Nucleo-F4X1RE User LEDS: Issue #51 reports compilation problems with
stm32_userled.c. Reported by Gappi92.
* TI Tiva Drivers:
- Tiva I2C: Correct an error in conditional compilation.
- Tiva SSI: Resolves issue 52 'Copy-Paste error in
tiva_ssibus_initialize()' submitted by Aleksandr Kazantsev.
* C Library/Header Files:
- C Library vsnprintf(): Fix precision for string formatting. Fixes
use of format precision to truncate input string. From Jussi
Kivilinna.
- C Library vsnprintf(): If size is zero, then vsnprintf() should
return the size of the required buffer without writing anything.
From Jussi Kivilinna.
- C Library netdb: in dns_query_callback, ret != -EADDRNOTAVAIL
condition consumes error returns including EAGAIN in this case,
dns query retransmission doesn't work. From Ritajina.
- C Library netdb: Fix time info in lib_dnscache.c. From Masayuki
Ishikawa.
- C Library netdb: Fix bugs in lib_gethostbynamer.c. This fix sets
h_name in struct hostent returned by gethostbyname(). From Masayuki
Ishikawa.
- C Library Defect Workaround: replace '%6.6u' format with an
equivalent '%06u'. From Tomasz Wozniak.
* Tools
- Fix mksyscall host binary name. From Alan Carvalho de Assis.
* Applications (apps/)
- Fix some calls to task_create(): argv[0] is the first parameter, not
the name of the task.
- Bitbucket Issue 5: I found an unexpected behavior in apps/
configuration generation. Adding external symbolic link in apps/
directory and using Make.defs for Kconfig generation, Kconfig file
has a wrong path in the source argument. It contains original dir
path outside of the source tree instead path to sub-directory in
apps/. The problem is connected with make/system symbolic link path
resolution. Corrected by a patch submitted by Artur Madrzak with
Issue 5.
- apps/: Make more globals static to avoid name clashes. From Juha
Niskanen.
* NSH: apps/nshlib:
- NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but
CONFIG_NSH_CMDPARMS defined and/or CONFIG_DISABLE_ENVIRON not
defined, then there is a situation that causes an infinite loop in
the parser. Noted by Freddie Chopin.
- NSH library: Fix building when CONFIG_NET_USRSOCK enabled with other
link-layers. From Jussi Kivilinna.
- NSH library: Fix some warnings about integer/pointer casts of
different sizes (probably only effects 64-bit simulation).
- NSH library: Fix open flags in nsh_codeccmd.c. From Masayuki
Ishikawa.
- I need to look at the registers that are at or around 0xe000ef90.
Using mw and xd, I see that nsh does not support pointers greater
than 0x7fffffff. A quick look at the source shows that the pointers
for those two commands are set with calls to strtol() rather than
strtoul(). Changing the two pointer-setting instances to strtoul()
fixes the problem, at least for my architecture/config. From Ian
McAfee.
- NSH library: Fix a resource leak in cmd_hexdump(). From Nobutaka
Toyoshima.
* Examples/Tests: apps/examples:
- apps/examples/hidkbd: Remove call to arch_usbhost_initialize().
That is violation of the OS interfacing rules and will no longer be
supported. USB host should be initialized as part of the normal
board bring-up logic as with any other devices and should not involve
illegal calls from applications into the OS.
- apps/examples/usbterm: Removed because it is not very useful and
because it can be configured to use an illegal call into the OS.
- examples/mm: Fix Makefile. Built-in was not being registered.
- examples/hidkbd: Add some missing configuration settings.
- examples/random: Avoid stack overflows. From Juha Niskanen.
- examples/nettest: Fix an error in pre-processor expression.
- examples/mtdpart: Prevent part array overflow. mtdpart examples
create partions and allocate from 1 index not a 0 index to part[]
array. This cause buffer overflow for part array. This change fixes
this problem. From EunBong Song.
- examples/can: Fix can example app to print data when
CONFIG_EXAMPLES_CAN_READ is defined. From Alan Carvalho de Assis.
* Network Utilies: apps/netutils:
- Not a clean fix, but at least makes DHCP working with
CONFIG_NETDEV_MULTINIC. From Andreas Bihlmaier.
- Ensure netlib will not be broken when setip will not bring the
network up anymore. From Sebastien Lorquet.
* CAN Utilies: apps/canutils:
- Fix libcanard github download link to get it compiling correctly.
From Alan Carvalho de Assis.
- Fix to use the new canardInit() function. From Alan Carvalho de
Assis.
* System Unitilities (apps/system)
- system/dhcpc: Add missing argument of fprintf.
* Tools (apps/tools):
- The dedicated windows tool at tools/mkkconfig.bat uses $APPSDIR,
which is not a windows shell variable, and is left uninitialized, but
in fact should be the current directory. From Sebastien Lorquet.
NuttX-7.22 Release Notes
------------------------
The 122nd release of NuttX, Version 7.22, was made on September 9, 2017,
and is available for download from the Bitbucket.org website. Note
that release consists of two tarballs: nuttx-7.22.tar.gz and
apps-7.22.tar.gz. These are available from:
https://bitbucket.org/nuttx/nuttx/downloads
https://bitbucket.org/nuttx/apps/downloads
Both may be needed (see the top-level nuttx/README.txt file for build
information).
Additional new features and extended functionality:
* Core OS:
- pthreads: Move functions from sched/pthreads to libc/pthreads. These
functions just coordinate other OS interface calls but are not a
fundamental OS interfaces and, hence, do not belong within the OS:
pthread_yield(), pthread_once(), pthread_cond_init(),
pthread_cond_destroy(), pthread_barrier_init(),
pthread_barrier_destroy(), and pthread_barrier_wait().
- Add power-related debug output.
* File Systems/Block and MTD Drivers
- RAMTRON: Add support for splitting block writes in chunks. Some
Re-RAMs like MB85AS4MT have a write buffer size limitation. From
Boris Astardzhiev.
- MTD: Add driver for Macronix QuadSPI flash memory. From Simon Piriou.
* Graphics/Display Drivers:
- SSD1306 LCD Driver: (1) Separate lcd_dev_s setup to separate object.
g_oleddev takes 1 KiB because framebuffer and was allocated to .data
section because of lcd_dev_s function pointer setup. Move lcd_dev_s
setup out, so that g_oleddev goes to .bss and avoid wasting ROM. (2)
Fix memory corruption caused by ssd1306_getrun(). ssd1306_getrun was
writing one extra byte (with value 0) past target buffer when pixlen
is multiple of 8. When pixlen was not multiple of 8, last byte of
buffer was fully cleared, instead of modifying only the (pixlen % 8)
bits of last byte. (3) Add support for board power control.
ThingseeOne has regulator for controlling display power on/off. Patch
adds support for board based power control to SSD1306 driver. (4) Add
DD-12864WO-4A/SSD1309 support to SSD1306 driver. From Jussi Kivilinna.
* Networking/Network Drivers:
- Sockets: Support listening sockets in the getsockname() function.
From Roland Takacs.
- IP Forwading: At the IP level, network may be configured to forward
IP packets that are not destined for the target through a different
network device, decrementing the packet TTL.
- IP forwarding: Add optional support to forward broadcast and
multicast packets. Add missing ICMP support.
- ICMPv6: Add 6LoWPAN and IP forwarding support.
- ICMPv6: Support source link-layer address option in RA. From
Masayuki Ishikawa.
- TUN Driver: Add definitions that will permit TUN-only networking.
- Socket I/F: Created a socket interface used to provide socket support.
Each address family has an interface that describes how to perform
socket operations on that address family. Currently only a couple of
methods are defined in the socket interface call table
- Remove CONFIG_NET_MULTILINK. This increases code size by a little,
but greatly reduces the complexity of the network code.
- Network procfs: Add support for routing tables at proc/net/route.
- Network procfs: Add support for network procfs statistics for the
PF_IEEE802154 address family.
- Network Driver Backlog: Remove driver based backlog support. This
affects the entire network, but is used by only one driver. The only
supported RX backlog is now via common read-ahead buffering.
* Wireless Networking/Wireless Drivers:
- IEEE 802.15.4 MAC / MRF234j60 Driver: Extensive updates for
association/beacon-enabled networks. From Anthony Merlino.
- IEEE 802.15.4 MAC / MRF234j60 Driver: Hook in setdevmode from newly
added radio attribute setting. From Anthony Merlino.
- IEEE 802.15.4 MAC: Supports get request for coordinator address. From
Anthony Merlino.
- IEEE 802.15.4 MAC: Notify radio layer of changes in devmode. From
Anthony Merlino.
- IEEE 802.15.4: Add special attribute that can be used to perform a
regdump of the radio. From Anthony Merlino.
- IEEE 802.15.4 loopback driver: Better simulation addressing: short
and extended addresses, panid, and IP address conversion.
- IEEE 802.15.4 Network Driver: Add logic to setup the network mask,
update the MAC-based IPv6 addressing when the network is brought up.
The idea is that addressing changes are supposed to occur only while
the network is down but won't take effect until the network is up
again.
- PktRadio: Add an infrastructure to support networking on generic
(non-IEEE 802.15.4) packet radios.
- PktRadio Loopback Driver: Add a PktRadio loopback network driver to
testing testing with 6LoWPAN and PktRadios on the simulator.
- Spirit Network Driver: The Spirit1 radio (SPSGRF-915) is the first
generic PktRadio Network driver. Based on STMicros STack packets
with 8-bit addressing. We need to use the STack packets in order to
provide the source address and automatic ACKing.
- Network procfs: Fix so that PktRadio address are shown correctly.
- Networking: Add support for some packet radio IOCTL commands.
- 6LoWPAN: Added handling for TCP and ICMPv6 packets.
- 6LoWPAN: Add configurable support for 6LoWPAN star topology. With
this change, the endpoints which are the 'points' of the star will
forward all traffic to the coordinator. The coordinator is assumed to
be the 'hub' of the star. This function also used IPv6 forwarding.
- 6LoWPAN: The original, Contiki-based design used only a single buffer
for reassemblying larger packets. This could be a problem issue for
hub configurations which really need the capability concurrently
reassemble multiple incoming streams concurrently. These was also a
design issue in that the reassembly buffer could be corrupted by
outgoing packets. The design was extended to support multiple
reassembly buffers, each associated with the reassembly tag and source
address. This assures that there can be be no corruption of the
reassembly once it has started.
- 6LoWPAN PktRadio: Now radio agnostic. All IEEE 802.15.4 dependencies
have been removed or isolated so that 6LoWPAN can be used with any
kind of packet radio. This involved things like: (1) generalizing
the representation of radio MAC meta-data, (2) changes to handle
variable-length radio addresses, (3) removal of all explicit IEEE
802.15.4 types, references, and interfaces, (4) a new radio driver
interface to return 'capabilities' of the drvier.
- ICMPv6: Update so that ICMPv6 can be used with 6LoWPAN.
- IPv6 Neighbor: Update table format to support IEEE 802.15.4 MAC
addresses.
- PF_IEEE802154 Address Family: Add support for the PF_IEEE802154
address family socket type. This socket is similar to the PF_PACKET,
"raw" packet address family except that: (1) it supports only
SOCK_DRAM, not SOCK_RAW, and (2) works only with IEEE 802.15.4
MAC-based radios. This address family permits simple access to IEEE
802.15.4 IOCTLs and frame-level network transfers.
* Other Common Device Drivers:
- Dynamically configurable USB composite devices: We developed a huge
Changeset over a year ago to make USB Composite configuration
dynamical and be able to instantiate the CDC/ACM multiple times inside
this device. We use this feature to switch between one in typical USB MSC + CDC/ACM configuration and up to three CDCACMs dynamically.
I've changed the interface for some USB-Functions to receive also the
dynamic configuration. From Frank Benkert.
- Franks' change remained on a branch until all issues were resolved.
the current version in Master is complete and ready for use.
- power: battery_charger: add ioctl for charging input current. From
Juha Niskanen.
- SMPS driver: Add generic upper-half driver for SMPS. From Mateusz
Szafoni.
- LED Driver: Add support for inverted LEDS. From Jeff.
- LED Driver: Add lightness correction for RGB LED driver. From Jeff.
- LTC4151 Driver: Add driver for LTC4151 current and voltage monitor.
From Giorgio Gro<72>.
- Serial TERMIOS: tcdrain() implementation based on a new term ioctl.
From Sebastien Lorquet.
- Serial TERMIOS: Add support for TCFLUSH. From Sebastien Lorquet.
- syslog: Add option to use the CLOCK_MONOTONIC for time stamping. From
Jussi Kivilinna.
- HC-SR04 Driver: Add support to HC-SR04 distance sensor. From Alan
Carvalho de Assis.
- COMP Driver: Add poll support. From Pekka Ervasti.
- BQ2429X Driver: add driver for TI BQ2429X battery charger. From Juha
Niskanen.
- ADC Driver: Add poll support. From Juha Niskanen.
- BCH Driver: Add poll support. From Jussi Kivilinna.
- RTC Driver: Extend the RTC framework with an alarm read ioctl
(RTC_RD_ALARM). Through it consumer could get configuration settings
about previously scheduled hardware alarms (active status, hours,
minutes, seconds). From Boris Astardzhiev.
* Simulation
- sim/ipforward: Add an IP forwarding configuration using TUN devices
and apps/examples/tun.
- Console: Add non blocking read to devconsole driver. From Simon
Piriou.
- Networking: Poll for TX frames to speed up driver. From Simon Piriou.
- pf_ieee802154: Add configuration for testing PF_IEEE802154 address
family sockets.
- ARM Simulator: Adds necessary functionality to build Simulator under
ARM Linux. Tested only on Raspberry3. Currently setjmp/longjmp do not
save/restore floating point registers. From Nickolay Semyonov.
* MicroChip/Atmel SAML21 Drivers:
- SAML21 I2C driver. Developed for and contributed with permissin from
Filament company. From Alan Carvalho de Assis.
- SAMD/L21 USB Driver: Add a USB driver. Developed for Filament Inc.
by Offcode, LTD. From Janne Rosberg.
* MicroChip/Atmel SAMv7 Boards:
- SAMV71-XULT: Add support for the MRF24J40 radio and create a
mrf24j40-starhub configuration.
- SAME70-Xplained: Add MRF24J40 support.
* NXP Freescale Kinetis Drivers:
- Kinetis USB Improvements: usbdev clean up ensuring proper use of HW.
Rework suspend and resume logic so they perform properly. Made attach
and detach functions optional. As they do not make sense for a bus
powered device. From David Sidrane.
- Kinetis SPI driver: From David Sidrane.
- Kinetis: I2C driver added I2C3, reference counting and reset.
Refactored the driver to support reference counting and reset added
I2C3. From David Sidrane.
- Kinetis RTC: Implementation of the alarm read function.
* NXP Freescale Kinetis Boards:
- configs/teensy-3.x USB: Define USBOTG-FS Read from FLASH access in
board config. Allow the board config to define the USBOTG-FS to have
Read access to FLASH. From David Sidrane.
- configs/teensy-3.x: Removed call to khci_usbattach. The call is not
need by the driver if CONFIG_USBDEV_BUSPOWERED=y. On a USB powered device if we are running we are attached. From David Sidrane.
- freedom-k66f: Use SPI driver. Initalize SPI1 on connector J6. No
real use, as of yet. From David Sidrane.
* NXP Freescale LPC43xx:
- LPC43xx: Modify up_allocate_(k)heap() to support PROTECTED mode. From
Alan Carvalho de Assis.
* NXP Freescale LPC4xx Boards:
- configs/Bambino: Add protected mode configuration to Bambino board.
From Alan Carvalho de Assis.
* On Semiconductor LC823450
- LC823450: Initial support for ON Semiconductor LC823450. From Masayuki
Ishikawa.
- LC823450: eMMC/SD and USB support for LC823450. From Masayuki Ishikawa.
* On Semiconductor LC823450 Boards
- LC823450-XGEVK: LC823450-XGEVK board support. From Masayuki
Ishikawa.
- LC823450-XGEVK: Add eMMC/SD and USB support. From Masayuki Ishikawa.
* STMicro STM32:
- STM32 L4: Add support for the STM32L475 family.
- STM32 L4 RCC: Enable ADC clock source. From Juha Niskanen.
- STM32: Allow clock frequencies > 168 Mhz on stm32f427/429. We need
to enable the power overdrive for this case. This change allows the
required bits to be set in proper sequence. It also modifies the
local register access operations to allow more than 16-bit registers.
From Sebastien Lorquet .
- STM32 F4: Add support for STM32F433RC. From Alan Carvalho de Assis.
- STM32 F7: Add new configuration option for enabling flash ART
Accelerator and flash prefetcher. From Jussi Kivilinna.
* STMicro STM32 Drivers:
- STM32 TIM: Add the set counter function for stm32 timers. From
Sergey Ustinov.
- STM32 HRTIM: Update HRTIM definitions. Add HRTIM driver. From
Mateusz Szafoni.
- STM32 HRTIM: Add HRTIM character driver. From Mateusz Szafoni.
- STM32 HRTIM: Fix DAC triggers configuration, Add missing master timer
logic, enable DAC triggering. From Mateusz Szafoni.
- STM32 HRTIM: Add DMA configuration. From Mateusz Szafoni.
- STM32 HRTIM: Add burst mode configuration. From Mateusz Szafoni.
- STM32 RTC: Port Boris Astardzhiev's RTC change for STM32L4 to STM32.
- STM32 DAC: Add support for HRTIM triggering. Separate dma buffer
configuration for channels. From Mateusz Szafoni.
- STM32 DAC: Conditional logic for timer triggering, fix TSEL
configuration when HRTIM, DMA request remapping, Add DMA buffers
initialization logic. From Mateusz Szafoni.
- STM32 DAC: Support external triggering for DMA transfer. From Mateusz
Szafoni.
- STM32 L1 TIM: Add base address for TIM11. From Juha Niskanen.
- STM32 F4 FLASH: Enable/disable the flash write protection on any
sector. I have verified it to work on the STM32 F427. From Sebastien
Lorquet.
- STM32 F4 Clocking: To use an external oscillator module (not just a
crystal) with the STM32F4, one needs to enable the HSEBYP bit in the
RCC_CR register. This change allows an integrator to define
STM32_RCC_CR_HSEBYP in their board.h file if they want this
configuration. From Jeff.
- STM32 F4 USB: I'm working on bringing up USB full-speed support on
STM32F405.<2E> My board does not include a USB power switch, VBus
sensing, over current detection, or ID pin. This commit add a
config<69>STM32_OTGFS_VBUS_ CONTROL which lets us selectively disable
VBus sensing and control.<2E> I also sneaked in a change to disable the
configgpio call for the ID pin, which is only used in OTG mode which
isn't supported yet.<2E> The only pins that need to be initialized should
be OTGFS_DP and OTGFS_DM. From Jeff.
- STM32 FLASH: Add CONFIG_STM32_STM32F469 support. From David Sidrane.
- STM32 COMP: Add default INM configuration and some missing COMP
1,3,5,7 code. From Mateusz Szafoni.
- STM32 F33: Add missing SYSCFG CFGR3 definitions. From Mateusz Szafoni.
- STM32 L4 Serial: Allow configuring Rx DMA buffer size. From Juha
Niskanen.
- STM32 L4 COMP: Input minus pin extended selection. From Juha Niskanen.
- STM32 L4 COMP: Bind to upper half comp driver. From Pekka Ervasti.
- STM32 L4 DAC: Port from STM32. Add ADC register definitions. From
Juha Niskanen.
- STM32 L4 DAC: Add option for routing DAC output to ADC. Actually
write something to the DAC DMA buffer. From Juha Niskanen.
- STM32 L4 DAC: Separate DMA buffer configuration for channels. From
Juha Niskanen.
- STM32 L4 ADC: Implement peripheral. From Juha Niskanen.
- STM32 F7: Definitions for I2C4, SDMMC2. Adapted RAM start / size to
- STM32 F7 I2C4: I2C4_SDA can also be on GPIO PB7. From Titus von
Boxberg.
internal SRAM. From Titus von Boxberg.
- STM32 F7 LTDC: Option for DSI output, inconsistency: the stm32f746
does not feature a DSI interface. compilable with LTDC_INTERFACE and
LTDC_USE_DSI. From Titus von Boxberg.
- STM32 F7 Clocking: Added functions for DSI clock source selection.
From Titus von Boxberg.
- STM32 F7 Clocking: Enable APB2 DSI clock. From Titus von Boxberg.
- STM32 F7 LTDC: No board specific dithering values used; corrected
dithering init. Corrected LIPOS/LIPCR calculation. Change only
polarity bits in LTDC_GCR. From Titus von Boxberg.
- STM32 F7 Reset: Added function for reset. From Titus von Boxberg.
- STM32 F7 DMA: DMA add dcache alignment check in stm32_dmacapable. In
the case dcache write-buffed mode is used (not write-through) buffer
alignment is required for DMA transfers because a)
arch_invalidate_dcache could lose buffered writes data and b)
arch_flush_dcache could corrupt adjacent memory if the maddr and the
mend+1, the next next address are not on ARMV7M_DCACHE_LINESIZE
boundaries. From David Sidrane.
- STM32 F7 SDMMC: SDMMC remove widebus limitation on DMA. There is no
documantation for the STM32F7 that limits DMA on 1 bit vrs 4 bit
mode. From David Sidrane.
- STM32 F7 SDMMC: SDMMC add dcache alignment check in
dma{recv|send}setup. In the case where CONFIG_SDIO_PREFLIGHT is not
used.
- STM32 F7 RTC: Port Boris Astardzhiev's RTC change for STM32L4 to
STM32F7.
* STMicro STM32 Boards:
- STM32F103-Minimum: Add GPIO device driver example. From Alan
Carvalho de Assis.
- STM32F103-Minimum: Add small hello example for STM32F103-Minimum
board. From Alan Carvalho de Assis.
- STM32F103-Minimum: Add support for SmartFS on Winbond W25 SPI NOR
Flash. From Alan Carvalho de Assis.
- STM32F103-Minimum: (1) Enable CONFIG_MTD_PARTITION in Kconfig if flash
partition is enabled and (2) Update the README.txt file with info
needed to get SmartFS working. From Alan Carvalho de Assis.
- Nucleo-F334R8: Add HRTIM initialization. From Mateusz Szafoni.
- Nucleo-F334R8: UART2 is default serial port (STLINK Virtual Port).
From Mateusz Szafoni.
- Clicker2-STM32: Add a configuration that was used with the MRF24J60
for 6loWPAN testing.
- Clicker2-STM32: Allow both IEEE 802.15.4 MAC character and network
devices to be registered.
- Clicker2-STM32: Add configurations to support the endpoint and hub
roles in a star topology.
- Clicker2-STM32: Add support for per-function-call stack checking.
From Anthony Merlino.
- Clicker2-STM32: Configure EDBG SPI CS just to make that it is
disabled.
- STM32F4 Discovery: Add logic to register the button driver and the
user led driver if so configured. From Jan Pobrislo.
- STM32F4-Discovery: Add a configuration for testing libc++. From Alan
Carvalho de Assis.
- B-L475E-IOT01A: Add support for the STMicro B-L475E-IOT01A board.
From Simon Piriou.
- B-L475E-IOT01A: Add support for the SPSRGF/Spirit1 radio module. Add
a configuration for testing sprit radio.
- B-L475E-IOT01A: Add configurations to support a star topology.
- B-L475E-IOT01A: add basic support for external Macronix QuadSPI flash
memory. From Simon Piriou.
- B-L475E-IOT01A: Enable UDP broadcast test in the spirit-starhub
configuration.
- STM32F334-DISCO: Add STM32F334-DISCO basic support. From Mateusz
Szafoni.
- STM32F746-Disco: Add ADC3 support. From Ivan Ucherdzhiev.
- STM32L476-Disco: Add a knsh configuration that may be used to test
the PROTECTED build mode.
- STM32F769I-DISCO: Initial port to STM32F769I-DISCO. From Titus von
Boxberg.
* C Library/Header Files:
- Move TUN ioctl command to include/nuttx/net/ioctl.h so that it will
always be unique.
- Math Library: Port gamma() and lgamma() from FreeBSD to NuttX. From
Alan Carvalho de Assis.
- C++: Compilation with recent C++ compiler needs an overloaded delete
operator that includes a size_t size argument. New sized delete
operators are only for C++14 and above.
* Build/Configuration System:
- Initial clang compile. From Goran Mekic.
- Add CLANG definitions in Kconfig and Toolchain.defs.
- drivers/wireless/ieee802154: Moved radios to individual
sub-directories. From Anthony Merlino.
- Makefile.unix: Add savedefconfig target. From Gwenhael Goavec-Merou.
- Add Gwenhael's change to Makefile.win and update README.txt to
described the new make target.
- All defconfig files are now in the compressed format created with
'make savedefconfig.' The original .config file can be reconstituted
using 'make olddefconfig.'
- Build System: It is no longer necessary to have a unique Make.defs
file for each configuration. A board may share a common Make.defs
file in the scripts directory. Duplicate Make.defs files removed;
common Make.defs file moved to the scripts/ sub-directory for each
board.
- Networking: Move INET socket interface out of net/sockets to its own
directory net/inet.
* Tools:
- testbuild.sh: Added -x to fail build on errors for continous
integration (CI). On CI we want to know ASAP of a failure. From
David Sidrane.
- Improve configure.sh behavior: (1) enable to call from top directory.
(2) enable to designate direct path for config. (3) install .gdbinit
if the target has. From Hidetaka Takano.
- Update tools/configure.c to same functionality as configure.sh. Add
an array of optional file names. Currently, .gdbinit is the only
optional file but other things like IDE-specific project files might
need to be copied as well.
- tools/configure.sh will now copy Eclipse project files if they are
present in the board directory file.
- Update configure.sh, configure.bat, configure.c: With compressed
format, part of the installation requires that we run 'make
olddefconfig' to restore the uncompressed defconfig format. Also,
while I was at it, I also added options to select host platform on
configure command line.
- tools/refresh.sh: Now runs make savedefconfig before copying the new
defconfig file in place; Also, added a new option --defaults. Since
the number of defaults that you now have to answer is so large, the
option lets you just accept the default values. So it works just like
--silent but still prompts you for the decision to save or discard the
new defconfig file.
- tools/refresh.sh: Update so that it can find the Make.defs file in
the new location.
* NSH: apps/nshlib:
- NSH Library: Add a Telnetd command. This is needed when network
initialization is deferred. In that case, telnet daemon cannot be
started until the network is finally initialized. The telnetd command
was added just for that case: So that the telnet daemon can be
started from the NSH command line after the network is configured.
- NSH Library: Misc changes needed for PktRadio support.
- NSH Library: Extend ifconfig command so that it can set variable
length packet radio addresss.
- NSH Library: Update addroute and delroute command. The would support either
IPv4 or IPv6, but not both. Allow expression of the netmask in IPv4 CIDR or
IPv6 slash notation. This really reduces the pain of using the commands,
especially for IPv6.
- NSH Library: Add a route command that will dump the content of routing table.
* Examples/Tests: apps/examples:
- examples/udp: Add configurable network device name; Add option to
suppress network initialization which is not needed if started by NSH
or for 6LoWPAN.
- examples/udp: Fix registration as a built-in program; Change some
naming to make room for a second target. Current one endpoint is the
target and one is the host. This will (eventually) allow two targets
to be both endpoints of the test. Change build so that both server
and client can be on a target, rather than one on the target one on
the host PC. Server IP address may not be provided on the command line.
- examples/udp: Port numbers need to be configurable to work with
6LoWPAN. Need to bind the client socket to a port number. This was
not required before so is a apparently a change in the UDP packet
dispatch logic.
- examples/udp: Enable testing with the broadcast address.
- examples/nettest: Support target boards on both ends of the test.
Separate out network initialization so that it may be used by both a
target server and a target client. Fix client/server naming
confusion; Add command line option to select the server address on the
target. Add support for both enpoints on target boards vs. one on a
target and one on the host PC.
- examples/nettest: The send buffer size is now a configuration option.
- examples/nettest: Loopback option should be available in Kconfig for
PktRadio.
- examples/keypadtest: REMOVED and warehoused in the Obsoleted
repository. This was just a bad clone of apps/examples/hidkbd for a
keypad driver that was removed years ago. It also uses illegal
function calls into the OS. So it has no purpse: It is redundant, it
uses illegal interfaces, and is a test for non-existent code.
- examples/ipforward: Add an IP forwarding example using only TUN
devices. Test extended to test forwarding of ICMPv6 multicast messages.
- Implement powermonitor example for ltc4151 current and voltage
monitor. From Giorgio Gro<72>.
- examples/pf_ieee802154: Add for testing PF_IEEE802154 sockets. Add
PANID to command line options; Cannot bind to address zero... There is
no counterpart to INADDR_ANY for these radios (not now at least).
- examples/dac: add DAC example. From Juha Niskanen.
* Network Utilies: apps/netutils:
- netutils/telnetc: This a port of libtelnet to NuttX.
- netutils/telnetd and users of telnetd: Add support for IPv6.
- netutils/thttpd: Remove the netstats demo. This depends on an
illegal function call and cannot be supported. That example could be
replaced with logic that uses the procfs network entries as was done
for NSH which had the same issue. But I am too lazy to implement that.
- netutils/netlib: Add support for PktRadio IOCTL commands.
- netutils/netlib: Add a helper to decode short addresses.
* Wireless Utilies: apps/wireless:
- wireless/ieee802154/i8sak: Rewrote i8sak to be test CLI for IEEE
802.15.4 MAC layer. From Anthony Merlino.
- wireless/ieee802154/i8sak: Updates to i8sak for
association/beacon-enabled changes to IEEE 802.15.4. From Anthony
Merlino.
- wireless/ieee802154/i8sak: Add option to make it easy to send large
frame for testing purposes. From Anthony Merlino.
- wireless/ieee802154/i8sak: Add scan command. From Anthony Merlino.
- wireless/ieee802154/i8sak: Add coordinfo command allowing you to
poll various attributes related to the coordinator. From Anthony
Merlino.
- wireless/ieee802154/i8sak: Add a option to retry on failures to the
assoc command (usually meaning tht the coordinator is not yet up).
- iwireless/ieee802154/8sak: Add reset command to reset the MAC layer.
Adds option to assoc command -t to specify how long to wait for a
response from the Coordinator. From Anthony Merlino.
- ieee802154/i8sak: Adds command to trigger regdump of radio. From
Anthony Merlino.
* System Unitilities (apps/system)
- apps/system/composite: Update to apps/system/composite assocated with
big changes to the composite device logic. From Frank Benkert.
- apps/system/composite: Remove CDC/ACM and MSC configuration logic.
This belongs in the OS composite initialization. Add and argument so
that you can select the USB composite configuration to be attached.
Restore USB tracing; remove unused field in a structure. Remove
configuration settings that are no longer used. Fix configuration
selecting.. was setting the port number, not the configure ID. Also
add a configuration option to select the default configuration.
- apps/system/composite: Add a configuration option to the boardctl()
calls to support multiple composite device configurations dynamically.
- apps/system/composite: Remove references to USBMSC. There still
dependencies on CDC/ACM in the serial USB trace output.
- apps/system/telnet: Add Telnet Chat deamon and and client from
libtelent.
* Platform-Specific Support (apps/platform)
Bugfixes. Only the most critical bugfixes are listed here (see the
ChangeLog for the complete list of bugfixes and for additional, more
detailed bugfix information):
* Core OS:
- Fix ELF loader up_checkarch on ARM arch. From Cristian Condurache.
- pthread_mutex_unlock(): Missing check for the case where
pthread_mutex_lock() is called when the mutex is not locked. In that
case, it would increment the underlying semaphore above 1. This is
the fix for a problem noted by initialkjc@yahoo.com.
- sig_timedwait(): Pending signal structure used after it has been
releasd. From anonymous Bitbucket Issue 59.
- mm_mallinfo: do heap end debug assert check with heap semaphore held.
From Jussi Kivilinna.
- sched/: Fix return value in sched_setaffinity(). From Masayuki
Ishikawa.
- Work Queues: work_queue() must cancel existing work prior to queuing
new work, otherwise the work queue list structure can become
corrupted. Problem noted by Pascal Speck.
- waitpid(): Corrects two problems when CONFIG_SCHED_HAVE_PARENT +
CONFIG_SCHED_CHILD_STATUS are enabled: (1) Was erroring out if the
waited for task had already exited, and (2) was not freeing resources
when a wait was completed. From Boris Astardzhiev.
* File System/Block and MTD Drivers:
- VFS poll(): Fix timeout calculation. From Jim Paris.
- VFS poll(): Fix poll for regular files and block devices. Open Group
documentation says that poll (and select) support regular files and
that 'Regular files shall always poll TRUE for reading and writing'.
From Jussi Kivilinna.
- VFS epoll(): Fix epoll_wait function. From Simon Piriou.
- Smart FS: Fix wrong freeing of device structure and use-after-free
issues on error paths. From Jussi Kivilinna.
- MTD FLASH drivers: The byte write method of several drivers had a
cloned error: It was not locking the bus while performing byte write
operations.
- MTD M2PX: If we READ while a write/erase is pending, the command is
ignored and the write/erase continues. If we dont catch this situation
we will return garbage to the user because the flash will not execute
the command. So READ MUST wait for write completion, and before that,
the bus must be locked since it's a precondition to calling
waitwritecomplete(). From Sebastien Lorquet.
- MTD FLASH drivers: Clone Sebastien Lorquet's m25px change to at25,
is25xp, ramtron, and sst25xx.
- MTD W25: Add missing locking and fix SPI_SELECT usage for
w25_unprotect. From Jussi Kivilinna.
- MTD W25: Wait for BUSY flag to clear in w25_readid and
w25_unprotect. W25Q128 datasheet says that all instructions expect
'Read Status Register' and 'Erase/Program Suspend' are ignored when
BUSY flag in status register is '1'. Therefore wait for busy flag to
clear in w25_readid() and w25_unprotect(). From Jussi Kivilinna.
- Automounter: FS_AUTOMOUNTER should depend on SCHED_LPWORK. From
Nickolay Semyonov.
* Networking/Network Drivers:
- TCP Listen: Throw error when error happens in the tcp_listen
function. From Roland Takacs.
- Nework Device Management: Do not search net device when all-zeros
address is used. From Roland Takacs.
- Network Device Management: Fix a error in netdev_register(); it was
not handling device names properly when TUN is the only network device.
- Network Device Management: Fix netdev_dev_lladdrsize(). In some
configurations, it could return the wrong size for the address of a
packet radio.
- Network Device Management: Fix typo for 802.11 devices in
netdev_register(). Was being masked before because depended on
CONFIG_NET_MULTLINK.
- TUN Driver: Use critical section instead of semaphore in
tun_ifdown(). From Masayuki Ishikawa.
- TUN Driver: Do all polling on worker thread. Otherwise, the stack
gets very deep.
- TUN Driver: Currently cannot support TAP mode unless Ethenet is
enabled.
- netdb: Fixed buffer size used for sending DNS queries should depend
on the configured DNS name size. From Ritjaina.
- UDP networking: The TTL (time to live) was not being set in the IPv4
or IPv6 header unless the UDP socket was bound.
- UDP Networking: Fix a copy-paste error that could effect networking
when both IPv4 and IPv6 are enabled.
- UDP Networking: When upd_input() cannot process a packet, it returns
ERROR so that network drivers may try calling ipv4_input() later. In
this case, it must also set d_len to zero. Otherwise, all network
drivers will assume tht there is also an outgoing packet. This
results in a gratuitous ARP.
- TCP Networking: Correct some issues that prevent TCP from working
correctly when both IPv4 and IPv6 are enabled.
- TCP Networking: TCP disconnection callbacks are not retained in a
list. This will support mutiple callbacks per lower-level TCP
connection structure. That is necessary for the cae where a socket is
dup'ed and shares the same lower-level connection structure. NOTE:
There still needs to be a call to tcp_start_monitor() when the socket
is dup'ed.
- TCP Networking: Start the network monitor for a socket when a TCP
socket is dup'ed.
- TCP Networking: If one of the dup'ed socket's is closed, then network
monitor resources associated with that one socket must be recovered.
Also, in the event that socket is being used on one thread, but then
closed on another, any threads waiting for events from the socket
should be informed of the closure. That latter requirement is not
implemented because current data structures do not support it.
- TCP Networking: Fix a race condition. The accept() operation is
performed with the network locked. However, the network is unlocked
BEFORE the connected state is set. Therefore, a context switch may
occur and the socket may no longer be connected when it is marked so.
Noted by Pascal Speck.
- Network routing tables: Fix a compilation error when IPv6 and
routing are enabled.
- Network procfs: Fix some spacing when both IPv6 and IPv4 are enabled.
- Network Local Sockets: Fix accept for local stream sockets. From
Jussi Kivilinna.
- Network Local Sockets: Fix server lc_waitsem overflow. From Jussi
Kivilinna.
- IPv6 Networking: Remove comparisons to the address with all ones
set. IPv6 does not support broadcast addresses and certainly not in
that form. Replace with multicast addresses beginning with 0xff02.
- ICMPv6 Networking: Fix a compilation issue with
CONFIG_NET_ICMPv6_AUTOCONF=y. From Masayuki Ishikawa.
- Networking: Fix net_lock returning ERROR when instead of real error
code on failure. From Jussi Kivilinna.
- IGMPv2 Networking: Remove special support for interrupt level
processing (there is none) and fix some timer cancellation logic. In
many files, correct comments. There is no interrupt level processing
in the networking layer.
* Wireless/Wireless Drivers:
- IEEE 802.15.4 MAC: Need counting protection on the logic that
releases the notification resources. Otherwise, notification handlers
may be operating with a stale pointer.
- IEEE 802.15.4 MAC: Improves internal timer logic to handle work
serially. Before, the MAC timer used a watchdog to schedule work with
the high priority worker queue. However, since everything in the MAC
is supposed to be serialized through the use of the high priority work
queue, but the timer uses a watchdog, there are some unintended
consequences. To simplify, we now use the delayed work feature of the
work queue. From Anthony Merlino.
- IEEE 802.15.4 Network Driver: Update RX statistics in network driver.
- IEEE 802.15.4 MRF24J40 Driver: Minor timing fix. Matches recommended
value in datasheet. Splits up driver into multiple files to make it
easier to navigate. Fixes issue with non-beacon enabled mode. From
Anthony Merlino.
- IEEE 802.15.4 MRF24J40 Driver: Fix a bug causing radio to cease
transmitting. From Anthony Merlino.
- IEEE 802.15.4 MRF24J40 Driver: Fixes issues with sleeping for beacon
enabled networking. From Anthony Merlino.
- EEE 802.15.4 MRF24J40 Driver: Fix math error for calculating sleep
count values. From Anthony Merlino.
- IEEE 802.15.4: Fix timing issues for beacon enabled coordinators and
endpoints. From Anthony Merlino.
- iIEEE 802.15.4: Fix issue with association on beacon-enabled
networking. From Anthony Merlino.
- 6LoWPAN: Correct a few addressing issues. Also reserve two bytes at
the end of the frame for the FCS.
- 6LoWPAN: Fixes needed when extended addressing is enabled; broke short
addressing. Loopback driver needs to initialize the MAC meta data;
Address decompression logic must have the MAC address to handle the
most common compression cases. Fix a src/dest address confusion and
other addressing problems.
- 6LoWPAN: Add missing IPv6 address creation to HC1 decode logic. Fix a
typo in an index that prevented use with HC1 and extended addresses.
- 6LoWPAN: TCP logic was not obeying MTU packet size limitations.
- 6LoWPAN: Major re-architecting of TCP logic to properly handle TCP
stuff like ACKs and TDP windowing which were not properly covered in
the initial design.
- 6LoWPAN: HC06, copy TCP header as though it were data. TCP packet
reassembly now seems to work OK.
- 6LoWPAN: Fix duplicate and bad memcpy in loopback driver.
- 6LoWPAN: Fix a misconception about HC06 16-bit IPv6 address
compression.
- 6LoWPAN: TCP send logic was returning a failure in one case when, in
fact, the send was successful.
* Common Drivers:
- USB MSC: Use struct instead of pointer to the struct as sizeof
argument in memset in usbmsc.c. Otherwise it leads to error: argument
to sizeof in memset call is the same pointer type struct usbmsc_lun_s
* as the destination. From Oleg Evseev.
- USB MSC: Add missing logic to define endpoints. The composite
changes broke the the non-composite, USB MSC only case because it omitted the critical setup when USB MSC was not part of the composite.
- USB CDC/ACM. Fix several known problems resulting from merge of USB
composite device. That merge now breaks some of the non-composite USB
devices.
- Button Driver: Interrupts weren't enabled since nothing updates them
after btn_poll() marks the file descriptor structure as being polling.
From Jan Pobrislo.
- ADC Driver: Fix some data alignment issues in the ADC driver.
- I2C Drivers: Handle I2C_TRANSFER return value consistently. Some I2C
peripherals transfers return zero on success, others number of
completed transfers. Make drivers robust against this. From Juha
Niskanen.
- COMP Driver: Fix compilation errors when poll disabled. From Mateusz
Szafoni.
* Simulation:
- Simulation: Fix mkdir issue in GNU target. From Simon Piriou.
- Simulation: x86 stack needs to be aligned to 16-byte boundaries.
- Simulation: Fix building 32-bit simulation on 32-bit X86. From Jussi
Kivilinna.
* ARM:
- ARM: The older ARM7 and ARM9 configurations were determining CFLAGS
based on the GCC version 4.x.x or not. That needx to be extended for
5.x.x and 6.x.x which also behave like 4.x.x.
* ARMv7-M:
- Fixed ARMv7-M Toolchain setting. Cortex-M4 only have Single
Precision FPU. From Hidetaka Takano.
- ARMv7-M syscall logic: Clear bit 0 in PC settings. Bit 0 is the
thumb mode indication and should not be set in the PC. This extra bit
has not caused problems in the past, but seeing it set in the PC is
unnerving.
* Expressif ESP32:
- Fix ESP32 gpio enable reg and default UART pin. Modify default UART
pin for ESP-WROOM-32. Fix gpio enable reg. From Sungki Kim.
* Microchip/Atmel SAMD21 Drivers:
- SAMD21: Fix some SPI-related issues. From Matt Thompson.
- SAMD21 SPI: I was having issues with the bus freezing up .. slaves
holding SDL low.. so I rewrote a good portion of the interrupt logic
based on the application notes from Atmel. One major improvement is
using the RXNACK flag in the STATUS register, which indicates that no
device responded to an address packet. Assuming that the chip will
always give an interrupt status, I believe it's possible to eliminate
the timer as well. From Matt Thompson.
- SAMD/L21: Need to preserve errno value across syslog() call.
- SAMD21: Changes needed to get USB working. From Matt Thompson.
* Microchip/Atmel SAMv7 Drivers:
- SAMv7 TWIHS: TWIHS driver add reference counting. From David Sidrane.
- SAMv7 CAN: We discovered a problem with the samv7 mcan driver which
results, under some circumstances, in a very high CPU load. The
problem occurs, and is easily reproducible, if the device is connected
to a CAN network with a wrongly configured CAN speed (baud rate). In
our tests we set the CAN speed of the device to 1000000 and the speed
of the other CAN nodes to 500000. The device is restarted and sends a
CANopen "bootup message" to the CAN network. This results in huge
amount of errors messages on the CAN bus, probably because of the CAN
feature for acknowledging error messages. The error messages can<61>t be
read by the device because of the misconfigured CAN speed, instead the
CAN chip reports lots of errors, which are reported to the application
which uses the CAN driver (CONFIG_CAN_ERRORS is enabled). The CAN
errors are reported from the CAN chip via interrupts and thus the
interrupt load is very high in this scenario. To fix the problem the
driver now disables each RX error interrupt after it is occurred. The
RX error interrupts are turned back on if at least one CAN message is
received successfully. From Stefan Kolb.
- SAMv7 CAN: I discovered while working on the SAMV7 mcan driver that
the implementation of the CAN error handling is suboptimal. In the
current implementation the many errors are implemented as pending
errors. But those errors are not pending, the errors occurred and are
gone directly afterwards. This commit changes the described behavior
and simplifies the handling of CAN errors. From Stefan Kolb.
* Microchip/Atmel SAMv7 Boards:
- SAMv71-XULT: Fix MRF24J40 interrupt GPIO number.
* NXP/Freescale Kinetis:
- Kinetis MPU: Disable MPU when not in protected mode. The hardware
reset state of the the MPU precludes any bus masters other then DMA
access to memory. Unfortunately USB and SDHC have there own DMA and
will not have access to memory in the default reset state. This change
disabled the MPU if present on system startup. From David Sidrane.
- Kinetis MPU: Fixed warning for kinetis_mpudisable. Missing header
file added. From David Sidrane.
- Kinetis SIM: Ensure isolation of clock dividers for 0 value case.
This fixes a bug were a SoC does not have a clockdivN register and
passes a 0 for the init value. This prevents overflow of the 0
decremented to -1 (0xffffffff) spilling over to other clockdivN
fields. From David Sidrane.
* NXP/Freescale i.MX6 Drivers:
- i.MX6: Fix a wrong parameter passed when calling irq_attach() in
imx_serial.c. From Masayuki Ishikawa.
- Based on Masayuki's change, I review all serial driver vector
attachment. I Found one additional error and updated all relevant
drivers to current interrupt parameter passing.
* STMicro STM32:
- STM32 F410 Kconfig: Fix peripherals available on the STM32 F410.
This also adds a select for STM32_HAVE_DAC1 present on this STM32
flavor. From Gwenhael Goavec-Merou.
- STM32 L4 DMA: Correct USART3_RX bad channel definition. From Juha
Niskanen.
- STM32 L4 PWR: Correct PWR_SR2 REGLPS and REGLPF bits, add port I
registers. Also remove duplicate section from Kconfig. From Juha
Niskanen.
- STM32 F7: do not enable read-modify-write on DTCM. "AN 4667 - STM32F7
Series system architecture and performance" recommends to disable
read-modify-write on DTCM: "If the DTCM-RAM is used as data location
and the variables used are byte or/and halfword types, since there is
no ECC management in this RAM on the STM32F7 Series, it is recommended
to disable the read-modify-write of the DTCM-RAM in the DTCM interface
(inthe DTCMCR register) to increase the performance." From Jussi
Kivilinna.
* STMicro STM32 Drivers:
- STM32 TIM3/4 are always 16-bits; never 32-bits. Noted by Eetu
Nevalainen..
- STM32 ADC: Invalidate dma buffer before use. Missing invalidation
caused old samples being fetched from cache. From Jussi Kivilinna.
- STM32, STM32L4, STM32F7 ADC: Fix channel 18 sample time. From Juha
Niskanen.
- STM32 DAC: Fix some configuration logic. When STM32_NDAC is greather
than 1, then second channel is always DAC1OUT2. From Mateusz Szafoni.
- STM32 DAC: Fix compilation when DMA disabled for channel. From
Mateusz Szafoni.
- STM32 F0: Fix some funny shifts in DAC header files. From Juha
Niskanen.
- STM32 F1 RTC fixes: (1) Compile issues because of missing RTC_MAGIC
#defines, (2) missing functionality based on RTC_MAGIC in RTC based on
stm32_rtcounter.c, (3) IRQ setup from up_rtc_initialize was later
reset in up_irqinitialize, (4) write access to backup registers
without enabling access to backup domain, (5) possible races in
set/cancel alarm. tested with STM32F103C8 only. device now wakes up
from forced STANDBY mode by alarm. From Leif Jakob.
- STM32/STM32 L4 PWM: While attempting to output a 70 MHz square wave
from the timer output of a STM32 clocked at 140 MHz, found that the
reload calculation was off by one. This correction does allow the
output up to 70 MHz. I am not sure this affects most users
generating slow PWM but for frequencies close to the PCLK, the
difference becomes significant. From JM.
- STM32 L4 I2C: Set I2C SDA and SCL pins to open drain mode. From Pekka
Ervasti.
- STM32 L4 I2C: I2C4 was writing to wrong RCC registers. From Juha
Niskanen.
- STM32 L4 DAC: Report transfer as completed in DMA callback. Without
this even O_NONBLOCK writes block the calling task if DAC was using
DMA. From Juha Niskanen.
- STM32 L4 COMP: comparators share RCC enable bit with SYSCFG. From
Juha Niskanen.
- STM32 L4 ADC: Correct EXTSEL macros. From Juha Niskanen.
- STM32 L4 TIM: TIM15,16,17 are always in APB2. From Juha Niskanen.
- STM32 F7 I2C: Set I2C4 SDA and SCL pins to open drain mode. From Juha
Niskanen.
- STM32 F4 RTCC: ISR register and write protection fix. From Eetu
Nevalainen.
- STM32 F7 Ethernet: Fix typo in header; Add memory sync barrier
between writing to DMA TX descriptor and restarting DMA TX. Avoid
calling work_queue on pollwork if it's already queued, just skip a
poll cycle instead. Nucleo-144: Fix RMII TXD1 signal, connected to
PB13 not to PG14. From savinz.
- STM32 F7: Added missing config option for register value debugging.
From Titus von Boxberg.
- STM32 F7: No FSMC, only FMC for STM32F7. From Titus von Boxberg.
- STM32 F7: HEAP2 depends on CONFIG_ARCH_HAVE_HEAP2, not on particular
FMC RAM type. From Titus von Boxberg.
- STM32 F7: STM32_RCC_DCKCFGR2 has nothing to do with PLLI2S; PLLI2S is
not dependent on LTDC, instead on SAICLK1/2 generated from PLLI2S.
From Titus von Boxberg.
- STM32F7: Some STM32F7 builds failed in build testing due to undefined
STM32_SRAM1_BASE. I think that is because stm32_allocateheap.c was
not including chip/stm32_memorymap.h.
- STM32 F7: dcache write-buffed mode is used (not write-through) buffer
alignment is required for DMA transfers because a)
arch_invalidate_dcache could lose buffered writes data and b)
arch_flush_dcache could corrupt adjacent memory if the buffer and the
bufflen, are not on ARMV7M_DCACHE_LINESIZE boundaries. From David
Sidrane.
* STMicro STM32 Boards:
- STM32F103-Minumum SPI: SPIDEV_WIRELESS used when this has
changed to SPIDEV_CONTACTLESS. From Nicolas Estibals.
- configs/: a few more places where SPIDEV_WIRELELSS should be
SPIDEV_CONTACTLESS.
- STM32F103-Minumum: Fix a BUG when reading from output pin. We need
a different read_ops to read from output pin. This patch fixes the
issue. From Alan Carvalho de Assis.
- STM32F103-Minumum: Use separated read_ops for GPIO interrupt pins.
From Alan Carvalho de Assis.
- STM32F103-Minumum: Fix compiler error in MCP2415 logic.
- STM32F746G-DISCO: Fix for compilation of STM32F746G-DISCO. From Ivan
Ucherdzhiev.
- STM32F746G-DISCO: Fix for stm32f746g-disco board for button support
with interrupt. This change is tested with buttons app example and it
is working with interrupts (signals). I tried the test with polling
but at this point it doesn't work. From Ivan Ucherdzhiev.
* Build System
- Fix -Werror=implicit-fallthrough on gcc7. From Julien Lecoeur.
- configs/Board.mk: Remove comment form end of line. In windows native
build, it appears to be trying to make that an extra parameter to the
AR command. From Jeff.
- configs/Board.mk: Remove quotes from CONFIG_ARCH_FAMILY. Causes
problems with Windows native build. From Jeff.
- Makefile.win would only create uboot images for ARM. MIPS support
also needed. From Lwazi Dube.
* C Library/Header Files:
- C++: Fix C++ __guard implementation for ARM. The standard C++ ABI
that most platforms follow defines __guard to be 64 bits. The existing
implementation of libxx_cxa_guard.cxx follows this. However, the
32-bit ARM C++ ABI defines it as 32 bits instead, and changes the
meaning slightly so only the lowest bit is used. This matters because
GCC creates guard symbols without regards to what libxx_cxa_guard.cxx
says. So on ARM, gcc allocates 4 bytes, but __cxa_guard_release
writes 8 bytes, zeroing out another unlucky variable nearby. Fix it
by special-casing 32-bit ARM in libxx_cxa_guard. From Jim Paris.
- C++: In cwchar it uses CONFIG_LIBC_WCHAR to only export the wc/mb
functions. When a build does not want to use wide or multibyte char
CONFIG_LIBC_WCHAR is not set. Therefore we should to only export the
wc/mb functions when defined. Regardless of the stat of
CONFIG_LIBC_WCHAR the non mb/wc definitions such as mbstate_t,
wint_t, wctype_t need to be exported. From David Sidrane.
- C Library: Fix an error in mkstemp() the could result in an infinite
loop. From Alan Carvalho de Assis.
- C Library: (1) Fix an error in mkstemp() the could result in an
infinite loop. (2) Fix for wrong output in some cases. For Example:
(a) input: "FILEXX", output: "FILE00" and repeats same output for
further invocations of mkstemp(). But, the ouput has to be FILE01,
FILE02, ...., FILEZZ. (b) input: "FILEXXXXXX", output: "FILE100000",
for next invocation "FILE200000" and so on. But it's good, if the
ouput goes like FILE000001, FILE000002, ..., FILE000101, ... From
Lokesh B V.
- C Library: gethostbyname_r: Fix check for space in buffer.
- C Library: inet_ntop() was printing negative values for fields >127.
- Math Library: Fix wrong ouput in modf() API. The sign of integral
part given by the modf() should be same as sign of input. But for
inputs between 0 and 1, the sign of integral part was not same as
sign of input. From Lokesh B V.
- Math Library: Fix wrong ouput in ceil() API. Ex:for input x = 1.0,
the output should be 1.0, but the ouput was 2.0. From Lokesh B V.
* Tools
- tools/testbuild.sh: Fix missing $ before variable name.
- tools/mkdeps.c: Eliminate a warning. MAX_PATH may already be defined
in included system files. From Jeff.
* Applications: apps/
- All apps/ Makefiles: Add .PRECIOUS: apps/libapps.a to every
Makefile. Hopefully this will end awkward problems when you Control-C
out of a build and libapps.a is deleted.
- platform/Makefile: More attempts to fix for Windows native build.
Backslash as a delimiter causes problems in pattern subsitutions.
* NSH: apps/nshlib:
- NSH network initialization: Fix some ieee 802.15.4 initialization
logic. It should not set the saddr or panid; those cannot be
hard-coded but must come from the coordinator. Re-factor a function
that has gotten too big and too complex. Do not set the IP address
for 6loWPAN. The 6loWPAN stack uses IP address that derive from the
ieee 802.15.4 addressing and cannot be (safely) configured by the user.
- NSH Library: Fix copy-paste typo in nsh_usbconsole.c. From Oleg
Evseev.
- NSH Library: fix size of 6LoWPAN extended address.
- NSH Library: Fix build break in nsh_command.c with IPv4/IPv6 dual
stack. From Masayuki Ishikawa.
- NSH Library: Correct parsing of ifconfig so that you can specify the
HW address without specifying the IP address.
* Examples/Tests: apps/examples:
- examples/smart: Fix some compilation errors. Obviously this test has
not been used in a LONG time.
- examples/udp: Renaming some files to prevent name collision in
libapps.a. Fix naming of a configuration setting.
- examples/nettest: Renaming some files to prevent name collision in
libapps.a
- examples/nximage: Remove unused global variable.
- examples/nsh: Remove APPNAME, PRIORITY, and STACKSIZE settings from
Makefile to avoid showing nsh in Builtin Apps. From Masayuki Ishikawa.
* Network Utilies: apps/netutils:
- netutils/tftpc: Missing header file causes errors in some
configurations.
- netutils/tftpc: TFTPC depends on CONFIG_NET_IPv4.
- netutils/netlib: Fixes to work when only USRSOCK is enabled.
- netutils/netlib: Fix netlib_nodaddrconv() so that its return type is
the same as other address conversion functions.
- netutils/netlib: If only PF_IEEE802154 socket family is enabled, then
must use SOCK_DGRAM.
- netutils/ftpc: Fix some memory leaks. From Boris Astardzhiev.
- netutils/thttpd: Fix a malformed if condition detected by GCC 6.x.x.
- netutils/dhcpd: Prevent buffer overflow in dhcpd_addoption. offset
represents distance from start of option buffer. So this should be
changed current option pointer minus start of buffer. From EunBong
Song.
* Wireless Utilies: apps/wireless:
- wireless/ieee802154/i8sak: Need to increment the next_saddr after
each successful association.
* System Unitilities (apps/system)
- correct copy-paste typo in comments in composite_main.c From Oleg
Evseev.
- system/dhcpc: The DHCPC renew command did not build correctly due to
naming problems. Noted by Masayuki Ishikawa.
- system/dhcpc: Fix warning about renew_main.o appear twice in rule.
* Tools (apps/tools):
- tools/mkkconfig.bat: Use %cd% instead of %~dp0 for usage of APPSDIR
in this batch file.
- tools/mkkconfig.bat: Remove quotes in echo. These were begin
Echo'ed and generating double quots in the output. From Jeff.
- Windows build fixes: tools/mkkconfig.bat - switch APPSDIR path to
use forward slashes for kconfig-frontends. interpreters/ficl -
Reorder some targets that causes GNUwin32 make to behave badly. From
Jeff.
Reference in New Issue View Git Blame Copy Permalink