90c52e6f8f
Author: Gregory Nutt <gnutt@nuttx.org>
Run all .h and .c files modified in last PR through nxstyle.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Net cleanup (#17)
* Fix the semaphore usage issue found in tcp/udp
1. The count semaphore need disable priority inheritance
2. Loop again if net_lockedwait return -EINTR
3. Call nxsem_trywait to avoid the race condition
4. Call nxsem_post instead of sem_post
* Put the work notifier into free list to avoid the heap fragment in the long run. Since the allocation strategy is encapsulated internally, we can even refine the implementation later.
* Network stack shouldn't allocate memory in the poll implementation to avoid the heap fragment in the long run, other modification include:
1. Select MM_IOB automatically since ICMP[v6] socket can't work without the read ahead buffer
2. Remove the net lock since xxx_callback_free already do the same thing
3. TCP/UDP poll should work even the read ahead buffer isn't enabled at all
* Add NET_ prefix for UDP_NOTIFIER and TCP_NOTIFIER option to align with other UDP/TCP option convention
* Remove the unused _SF_[IDLE|ACCEPT|SEND|RECV|MASK] flags since there are code to set/clear these flags, but nobody check them.
217 lines
6.0 KiB
Plaintext
217 lines
6.0 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
|
#
|
|
|
|
if NET_IPv6
|
|
menu "ICMPv6 Networking Support"
|
|
|
|
config NET_ICMPv6
|
|
bool "Enable ICMPv6 networking"
|
|
default n
|
|
depends on NET
|
|
---help---
|
|
Enable minimal ICMPv6 support. Includes built-in support
|
|
for sending replies to received ECHO (ping) requests.
|
|
|
|
config NET_ICMPv6_NO_STACK
|
|
bool "Disable ICMPv6 stack"
|
|
default n
|
|
select NET_ICMPv6
|
|
---help---
|
|
Build without ICMPv6 stack even if ICMPv6 networking support enabled.
|
|
|
|
if NET_ICMPv6 && !NET_ICMPv6_NO_STACK
|
|
|
|
config NET_ICMPv6_SOCKET
|
|
bool "IPPROTO_ICMP6 socket support"
|
|
default n
|
|
select MM_IOB
|
|
---help---
|
|
Enable support for IPPROTO_ICMP6 sockets. These sockets are needed
|
|
for application level support for sending ICMPv7 ECHO requests and
|
|
receiving associated ICMPv6 ECHO replies.
|
|
|
|
config NET_ICMPv6_NEIGHBOR
|
|
bool "Solicit destination addresses"
|
|
default n
|
|
---help---
|
|
Enable logic to send ICMPv6 neighbor solicitation requests if
|
|
the target IPv6 address mapping does not appear in the Neighbor
|
|
table.
|
|
|
|
if NET_ICMPv6_NEIGHBOR
|
|
|
|
config ICMPv6_NEIGHBOR_MAXTRIES
|
|
int "ICMPv6 neighbor solicitation retries"
|
|
default 5
|
|
---help---
|
|
Send the Neighbor solicitation this number of times before giving
|
|
up and deciding that the target IP6 address is non reachable.
|
|
|
|
config ICMPv6_NEIGHBOR_DELAYMSEC
|
|
int "ICMPv6 neighbor re-solicit delay"
|
|
default 20
|
|
---help---
|
|
Wait this number of milliseconds after sending the Neighbor
|
|
Solicitation before checking if the IPv6 address mapping is present
|
|
in the Neighbor Table. This time should be related to the maximum
|
|
round trip time on the network since it is basically the time from
|
|
when an Neighbor Solicitation is sent until the Neighbor
|
|
Advertisement is received.
|
|
|
|
endif # NET_ICMPv6_NEIGHBOR
|
|
|
|
config NET_ICMPv6_AUTOCONF
|
|
bool "ICMPv6 auto-configuration"
|
|
default n
|
|
---help---
|
|
Enable ioctl() logic that implements ICMPv6 auto configuration.
|
|
ICMPv6 auto configuration is an alternative to DHCPv6 for obtaining
|
|
an IPv6 address from a router.
|
|
|
|
if NET_ICMPv6_AUTOCONF
|
|
|
|
config ICMPv6_AUTOCONF_MAXTRIES
|
|
int "ICMPv6 router solicitation retries"
|
|
default 5
|
|
---help---
|
|
Send the Router solicitation this number of times before giving
|
|
up and deciding that no router is going to provide an IP address.
|
|
|
|
config ICMPv6_AUTOCONF_DELAYMSEC
|
|
int "ICMPv6 router re-solicit delay"
|
|
default 20
|
|
---help---
|
|
Wait this number of milliseconds before re-sending the Router
|
|
Solicitation. This time should be related to the maximum
|
|
round trip time on the network since it is basically the time from
|
|
when an Router Solicitation is sent until the Router
|
|
Advertisement is received.
|
|
|
|
endif # NET_ICMPv6_AUTOCONF
|
|
|
|
config NET_ICMPv6_ROUTER
|
|
bool "Router Advertisement"
|
|
default n
|
|
---help---
|
|
In a router-less environment, NuttX can be configured to provide a
|
|
response to Router Solicitation messages and, hence, providing
|
|
addressing to IPv6 nodes on the network.
|
|
|
|
if NET_ICMPv6_ROUTER
|
|
|
|
config NET_ICMPv6_ROUTER_MANUAL
|
|
bool "Manual router prefix"
|
|
default n
|
|
---help---
|
|
Select this to set the advertised router prefix manually. Otherwise, it
|
|
will be derived from the device IPv6 address and prefix length set in
|
|
the netdev structure.
|
|
|
|
if NET_ICMPv6_ROUTER_MANUAL
|
|
|
|
config NET_ICMPv6_PREFLEN
|
|
int "Prefix length"
|
|
default 64
|
|
range 0 128
|
|
---help---
|
|
The length (in bits) of the IPv6 address prefix. This is the number
|
|
of MS bits under the network mask. The default of 64 would
|
|
correspond to a network mask of:
|
|
|
|
0xffff:0xffff:0xffff:0xffff:0x0000:0x0000:0x0000:0x0000.
|
|
|
|
comment "Router Prefix"
|
|
|
|
config NET_ICMPv6_PREFIX_1
|
|
hex "[0]"
|
|
default 0xfc00
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the first of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
config NET_ICMPv6_PREFIX_2
|
|
hex "[1]"
|
|
default 0x0000
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the second of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
config NET_ICMPv6_PREFIX_3
|
|
hex "[2]"
|
|
default 0x0000
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the third of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
config NET_ICMPv6_PREFIX_4
|
|
hex "[3]"
|
|
default 0x0000
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the fourth of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
config NET_ICMPv6_PREFIX_5
|
|
hex "[4]"
|
|
default 0x0000
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the fifth of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
config NET_ICMPv6_PREFIX_6
|
|
hex "[5]"
|
|
default 0x0000
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the sixth of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
config NET_ICMPv6_PREFIX_7
|
|
hex "[6]"
|
|
default 0x0000
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the seventh of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
config NET_ICMPv6_PREFIX_8
|
|
hex "[7]"
|
|
default 0x0000
|
|
range 0x0 0xffff
|
|
---help---
|
|
This the IPv6 address prefix that will be provided in the IPv6 Router
|
|
Advertisement message. This is the last of the 8-values. The
|
|
default for all eight values is fc00::0.
|
|
|
|
endif # NET_ICMPv6_ROUTER_MANUAL
|
|
endif # NET_ICMPv6_ROUTER
|
|
|
|
if NET_ICMPv6_SOCKET
|
|
|
|
config NET_ICMPv6_NCONNS
|
|
int "Max ICMPv6 packet sockets"
|
|
default 4
|
|
|
|
config NET_ICMPv6_NPOLLWAITERS
|
|
int "Number of ICMPv6 poll waiters"
|
|
default 1
|
|
|
|
endif # NET_ICMPv6_SOCKET
|
|
|
|
endif # NET_ICMPv6 && !NET_ICMPv6_NO_STACK
|
|
endmenu # ICMPv6 Networking Support
|
|
endif # NET_IPv6
|