529 lines
18 KiB
C
529 lines
18 KiB
C
/****************************************************************************
|
||
* boards/arm/stm32l4/nucleo-l452re/include/nucleo-l452re.h
|
||
*
|
||
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||
* contributor license agreements. See the NOTICE file distributed with
|
||
* this work for additional information regarding copyright ownership. The
|
||
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||
* "License"); you may not use this file except in compliance with the
|
||
* License. You may obtain a copy of the License at
|
||
*
|
||
* http://www.apache.org/licenses/LICENSE-2.0
|
||
*
|
||
* Unless required by applicable law or agreed to in writing, software
|
||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||
* License for the specific language governing permissions and limitations
|
||
* under the License.
|
||
*
|
||
****************************************************************************/
|
||
|
||
#ifndef __BOARDS_ARM_STM32L4_NUCLEO_L452RE_INCLUDE_NUCLEO_L452RE_H
|
||
#define __BOARDS_ARM_STM32L4_NUCLEO_L452RE_INCLUDE_NUCLEO_L452RE_H
|
||
|
||
/****************************************************************************
|
||
* Included Files
|
||
****************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
#ifndef __ASSEMBLY__
|
||
# include <stdint.h>
|
||
#endif
|
||
|
||
/****************************************************************************
|
||
* Pre-processor Definitions
|
||
****************************************************************************/
|
||
|
||
/* Clocking *****************************************************************/
|
||
|
||
/* The NUCLEOL452RE supports both HSE and LSE crystals (X2 and X3). However,
|
||
* as shipped, the X3 crystal is not populated. Therefore the Nucleo-L452RE
|
||
* will need to run off the 16MHz HSI clock, or the 32khz-synced MSI.
|
||
*
|
||
* System Clock source : PLL (HSI)
|
||
* SYSCLK(Hz) : 80000000 Determined by PLL configuration
|
||
* HCLK(Hz) : 80000000 (STM32L4_RCC_CFGR_HPRE) (Max 80 MHz)
|
||
* AHB Prescaler : 1 (STM32L4_RCC_CFGR_HPRE) (Max 80 MHz)
|
||
* APB1 Prescaler : 1 (STM32L4_RCC_CFGR_PPRE1) (Max 80 MHz)
|
||
* APB2 Prescaler : 1 (STM32L4_RCC_CFGR_PPRE2) (Max 80 MHz)
|
||
* HSI Frequency(Hz) : 16000000 (nominal)
|
||
* PLLM : 1 (STM32L4_PLLCFG_PLLM)
|
||
* PLLN : 10 (STM32L4_PLLCFG_PLLN)
|
||
* PLLP : 0 (STM32L4_PLLCFG_PLLP)
|
||
* PLLQ : 0 (STM32L4_PLLCFG_PLLQ)
|
||
* PLLR : 2 (STM32L4_PLLCFG_PLLR)
|
||
* PLLSAI1N : 12
|
||
* PLLSAI1Q : 4
|
||
* Flash Latency(WS) : 4
|
||
* Prefetch Buffer : OFF
|
||
* 48MHz for USB OTG FS, : Doable if required using PLLSAI1 or MSI
|
||
* SDIO and RNG clock
|
||
*/
|
||
|
||
/* HSI - 16 MHz RC factory-trimmed
|
||
* LSI - 32 KHz RC
|
||
* MSI - variable up to 48 MHz, synchronized to LSE
|
||
* HSE - not installed
|
||
* LSE - 32.768 kHz installed
|
||
*/
|
||
|
||
#define STM32L4_HSI_FREQUENCY 16000000ul
|
||
#define STM32L4_LSI_FREQUENCY 32000
|
||
#define STM32L4_LSE_FREQUENCY 32768
|
||
|
||
#if 1
|
||
# define HSI_CLOCK_CONFIG /* HSI-16 clock configuration */
|
||
#elif 0
|
||
/* Make sure you installed one! */
|
||
|
||
# define HSE_CLOCK_CONFIG /* HSE with 8 MHz xtal */
|
||
#else
|
||
# define MSI_CLOCK_CONFIG /* MSI @ 4 MHz autotrimmed via LSE */
|
||
#endif
|
||
|
||
#if defined(HSI_CLOCK_CONFIG)
|
||
|
||
#define STM32L4_BOARD_USEHSI 1
|
||
|
||
/* XXX sysclk mux = pllclk */
|
||
|
||
/* XXX pll source mux = hsi */
|
||
|
||
/* REVISIT: Trimming of the HSI and MSI is not yet supported. */
|
||
|
||
/* Main PLL Configuration.
|
||
*
|
||
* Formulae:
|
||
*
|
||
* VCO input frequency = PLL input clock frequency / PLLM,
|
||
* 1 <= PLLM <= 8
|
||
* VCO output frequency = VCO input frequency × PLLN,
|
||
* 8 <= PLLN <= 86,
|
||
* frequency range 64 to 344 MHz
|
||
* PLL output P (SAI3) clock frequency = VCO frequency / PLLP,
|
||
* PLLP = 7, or 17,
|
||
* or 0 to disable
|
||
* PLL output Q (48M1) clock frequency = VCO frequency / PLLQ,
|
||
* PLLQ = 2, 4, 6, or 8,
|
||
* or 0 to disable
|
||
* PLL output R (CLK) clock frequency = VCO frequency / PLLR,
|
||
* PLLR = 2, 4, 6, or 8,
|
||
* or 0 to disable
|
||
*
|
||
* PLL output P is used for SAI
|
||
* PLL output Q is used for OTG FS, SDMMC, RNG
|
||
* PLL output R is used for SYSCLK
|
||
* PLLP = 0 (not used)
|
||
* PLLQ = 0 (not used)
|
||
* PLLR = 2
|
||
* PLLN = 10
|
||
* PLLM = 1
|
||
*
|
||
* We will configure like this
|
||
*
|
||
* PLL source is HSI
|
||
*
|
||
* PLL_REF = STM32L4_HSI_FREQUENCY / PLLM
|
||
* = 16,000,000 / 1
|
||
* = 16,000,000
|
||
*
|
||
* PLL_VCO = PLL_REF * PLLN
|
||
* = 16,000,000 * 10
|
||
* = 160,000,000
|
||
*
|
||
* PLL_CLK = PLL_VCO / PLLR
|
||
* = 160,000,000 / 2 = 80,000,000
|
||
* PLL_48M1 = disabled
|
||
* PLL_SAI3 = disabled
|
||
*
|
||
* ----------------------------------------
|
||
*
|
||
* PLLSAI1 Configuration
|
||
*
|
||
* The clock input and M divider are identical to the main PLL.
|
||
* However the multiplier and postscalers are independent.
|
||
* The PLLSAI1 is configured only if CONFIG_STM32L4_SAI1PLL is defined
|
||
*
|
||
* SAI1VCO input frequency = PLL input clock frequency
|
||
* SAI1VCO output frequency = SAI1VCO input frequency × PLLSAI1N,
|
||
* 8 <= PLLSAI1N <= 86,
|
||
* frequency range 64 to 344 MHz
|
||
* SAI1PLL output P (SAI1) clock frequency = SAI1VCO frequency / PLLSAI1P,
|
||
* PLLP = 7, or 17,
|
||
* or 0 to disable
|
||
* SAI1PLL output Q (48M2) clock frequency = SAI1VCO frequency / PLLSAI1Q,
|
||
* PLLQ = 2, 4, 6, or 8,
|
||
* or 0 to disable
|
||
* SAI1PLL output R (ADC1) clock frequency = SAI1VCO frequency / PLLSAI1R,
|
||
* PLLR = 2, 4, 6, or 8,
|
||
* or 0 to disable
|
||
*
|
||
* We will configure like this
|
||
*
|
||
* PLLSAI1 disabled
|
||
*
|
||
* ----------------------------------------
|
||
*
|
||
* PLLSAI2 Configuration
|
||
*
|
||
* The clock input and M divider are identical to the main PLL.
|
||
* However the multiplier and postscalers are independent.
|
||
* The PLLSAI2 is configured only if CONFIG_STM32L4_SAI2PLL is defined
|
||
*
|
||
* SAI2VCO input frequency = PLL input clock frequency
|
||
* SAI2VCO output frequency = SAI2VCO input frequency × PLLSAI2N,
|
||
* 8 <= PLLSAI1N <= 86,
|
||
* frequency range 64 to 344 MHz
|
||
* SAI2PLL output P (SAI2) clock frequency = SAI2VCO frequency / PLLSAI2P,
|
||
* PLLP = 7, or 17,
|
||
* or 0 to disable
|
||
* SAI2PLL output R (ADC2) clock frequency = SAI2VCO frequency / PLLSAI2R,
|
||
* PLLR = 2, 4, 6, or 8,
|
||
* or 0 to disable
|
||
*
|
||
* We will configure like this
|
||
*
|
||
* PLLSAI2 disabled
|
||
*
|
||
* ----------------------------------------
|
||
*
|
||
* TODO:
|
||
* The STM32L is a low power peripheral and all these clocks should be
|
||
* configurable at runtime.
|
||
*
|
||
* ----------------------------------------
|
||
*
|
||
* TODO
|
||
* These clock sources can be configured in Kconfig
|
||
* (this is not a board feature)
|
||
* USART1
|
||
* USART2
|
||
* USART3
|
||
* UART4
|
||
* UART5
|
||
* LPUART1
|
||
* I2C1
|
||
* I2C2
|
||
* I2C3
|
||
* LPTIM1
|
||
* LPTIM2
|
||
* SAI1
|
||
* SAI2
|
||
* CLK48
|
||
* ADC
|
||
* SWPMI
|
||
* DFSDM
|
||
*/
|
||
|
||
/* prescaler common to all PLL inputs; will be 1 (XXX source is implicitly
|
||
* as per comment above HSI)
|
||
*/
|
||
|
||
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
||
|
||
/* 'main' PLL config; we use this to generate our system clock via the R
|
||
* output. We set it up as 16 MHz / 1 * 10 / 2 = 80 MHz
|
||
*
|
||
* XXX NOTE:
|
||
* currently the main PLL is implicitly turned on and is implicitly the
|
||
* system clock; this should be configurable since not all applications may
|
||
* want things done this way.
|
||
*/
|
||
|
||
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(10)
|
||
#define STM32L4_PLLCFG_PLLP 0
|
||
#undef STM32L4_PLLCFG_PLLP_ENABLED
|
||
#define STM32L4_PLLCFG_PLLQ RCC_PLLCFG_PLLQ_2
|
||
#define STM32L4_PLLCFG_PLLQ_ENABLED
|
||
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR(2)
|
||
#define STM32L4_PLLCFG_PLLR_ENABLED
|
||
|
||
/* 'SAIPLL1' is not used in this application */
|
||
|
||
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(12)
|
||
#define STM32L4_PLLSAI1CFG_PLLP 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
|
||
#define STM32L4_PLLSAI1CFG_PLLQ 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLQ_ENABLED
|
||
#define STM32L4_PLLSAI1CFG_PLLR 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
|
||
|
||
/* 'SAIPLL2' is not used in this application */
|
||
|
||
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
|
||
#define STM32L4_PLLSAI2CFG_PLLP 0
|
||
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
|
||
#define STM32L4_PLLSAI2CFG_PLLR 0
|
||
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
|
||
|
||
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
|
||
|
||
/* CLK48 will come from HSI48 */
|
||
|
||
#if defined(CONFIG_STM32L4_USBFS) || defined(CONFIG_STM32L4_RNG)
|
||
# define STM32L4_USE_CLK48 1
|
||
# define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_HSI48
|
||
# define STM32L4_HSI48_SYNCSRC SYNCSRC_NONE
|
||
#endif
|
||
|
||
/* enable the LSE oscillator, used automatically trim the MSI, and for RTC */
|
||
|
||
#define STM32L4_USE_LSE 1
|
||
|
||
/* AHB clock (HCLK) is SYSCLK (80MHz) */
|
||
|
||
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
|
||
#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
||
|
||
/* APB1 clock (PCLK1) is HCLK / 1 (80MHz) */
|
||
|
||
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
|
||
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
|
||
|
||
/* The timer clock frequencies are automatically defined by hardware.
|
||
* If the APB prescaler equals 1, the timer clock frequencies are set to the
|
||
* same frequency as that of the APB domain. Otherwise they are set to twice.
|
||
*
|
||
* REVISIT : this can be configured
|
||
*/
|
||
|
||
#define STM32L4_APB1_TIM2_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM3_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM4_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM5_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM6_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM7_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
|
||
/* APB2 clock (PCLK2) is HCLK (80MHz) */
|
||
|
||
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
|
||
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
|
||
|
||
/* The timer clock frequencies are automatically defined by hardware.
|
||
* If the APB prescaler equals 1, the timer clock frequencies are set to the
|
||
* same frequency as that of the APB domain. Otherwise they are set to twice.
|
||
*
|
||
* REVISIT : this can be configured
|
||
*/
|
||
|
||
#define STM32L4_APB2_TIM1_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
#define STM32L4_APB2_TIM15_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
#define STM32L4_APB2_TIM16_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
|
||
/* TODO SDMMC */
|
||
|
||
#elif defined(HSE_CLOCK_CONFIG)
|
||
|
||
/* Use the HSE */
|
||
|
||
#define STM32L4_BOARD_USEHSE 1
|
||
|
||
/* XXX sysclk mux = pllclk */
|
||
|
||
/* XXX pll source mux = hse */
|
||
|
||
/* Prescaler common to all PLL inputs */
|
||
|
||
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
||
|
||
/* 'main' PLL config; we use this to generate our system clock */
|
||
|
||
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(20)
|
||
#define STM32L4_PLLCFG_PLLP 0
|
||
#undef STM32L4_PLLCFG_PLLP_ENABLED
|
||
#define STM32L4_PLLCFG_PLLQ 0
|
||
#undef STM32L4_PLLCFG_PLLQ_ENABLED
|
||
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2
|
||
#define STM32L4_PLLCFG_PLLR_ENABLED
|
||
|
||
/* 'SAIPLL1' is used to generate the 48 MHz clock */
|
||
|
||
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(12)
|
||
#define STM32L4_PLLSAI1CFG_PLLP 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
|
||
#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_2
|
||
#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED
|
||
#define STM32L4_PLLSAI1CFG_PLLR 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
|
||
|
||
/* 'SAIPLL2' is not used in this application */
|
||
|
||
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
|
||
#define STM32L4_PLLSAI2CFG_PLLP 0
|
||
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
|
||
#define STM32L4_PLLSAI2CFG_PLLR 0
|
||
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
|
||
|
||
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
|
||
|
||
/* Enable CLK48; get it from PLLSAI1 */
|
||
|
||
#if defined(CONFIG_STM32L4_USBFS) || defined(CONFIG_STM32L4_RNG)
|
||
# define STM32L4_USE_CLK48 1
|
||
# define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1
|
||
# define STM32L4_HSI48_SYNCSRC SYNCSRC_NONE
|
||
#endif
|
||
|
||
/* Enable LSE (for the RTC) */
|
||
|
||
#define STM32L4_USE_LSE 1
|
||
|
||
/* Configure the HCLK divisor (for the AHB bus, core, memory, and DMA */
|
||
|
||
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
|
||
#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
||
|
||
/* Configure the APB1 prescaler */
|
||
|
||
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
|
||
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
|
||
|
||
#define STM32L4_APB1_TIM2_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM3_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM4_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM5_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM6_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM7_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
|
||
/* Configure the APB2 prescaler */
|
||
|
||
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
|
||
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
|
||
|
||
#define STM32L4_APB2_TIM1_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
#define STM32L4_APB2_TIM15_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
#define STM32L4_APB2_TIM16_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
|
||
#elif defined(MSI_CLOCK_CONFIG)
|
||
|
||
/* Use the MSI; frequ = 4 MHz; autotrim from LSE */
|
||
|
||
#define STM32L4_BOARD_USEMSI 1
|
||
#define STM32L4_BOARD_MSIRANGE RCC_CR_MSIRANGE_4M
|
||
|
||
/* XXX sysclk mux = pllclk */
|
||
|
||
/* XXX pll source mux = msi */
|
||
|
||
/* prescaler common to all PLL inputs */
|
||
|
||
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
||
|
||
/* 'main' PLL config; we use this to generate our system clock */
|
||
|
||
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(40)
|
||
#define STM32L4_PLLCFG_PLLP 0
|
||
#undef STM32L4_PLLCFG_PLLP_ENABLED
|
||
#define STM32L4_PLLCFG_PLLQ 0
|
||
#undef STM32L4_PLLCFG_PLLQ_ENABLED
|
||
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2
|
||
#define STM32L4_PLLCFG_PLLR_ENABLED
|
||
|
||
/* 'SAIPLL1' is not used in this application */
|
||
|
||
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(24)
|
||
#define STM32L4_PLLSAI1CFG_PLLP 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
|
||
#define STM32L4_PLLSAI1CFG_PLLQ 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLQ_ENABLED
|
||
#define STM32L4_PLLSAI1CFG_PLLR 0
|
||
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
|
||
|
||
/* 'SAIPLL2' is not used in this application */
|
||
|
||
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
|
||
#define STM32L4_PLLSAI2CFG_PLLP 0
|
||
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
|
||
#define STM32L4_PLLSAI2CFG_PLLR 0
|
||
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
|
||
|
||
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
|
||
|
||
/* Enable CLK48; get it from HSI48 */
|
||
|
||
#if defined(CONFIG_STM32L4_USBFS) || defined(CONFIG_STM32L4_RNG)
|
||
# define STM32L4_USE_CLK48 1
|
||
# define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_HSI48
|
||
# define STM32L4_HSI48_SYNCSRC SYNCSRC_NONE
|
||
#endif
|
||
|
||
/* Enable LSE (for the RTC) */
|
||
|
||
#define STM32L4_USE_LSE 1
|
||
|
||
/* Configure the HCLK divisor (for the AHB bus, core, memory, and DMA */
|
||
|
||
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
|
||
#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
||
|
||
/* Configure the APB1 prescaler */
|
||
|
||
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
|
||
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
|
||
|
||
#define STM32L4_APB1_TIM2_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM3_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM4_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM5_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM6_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
#define STM32L4_APB1_TIM7_CLKIN (STM32L4_PCLK1_FREQUENCY)
|
||
|
||
/* Configure the APB2 prescaler */
|
||
|
||
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
|
||
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 1)
|
||
|
||
#define STM32L4_APB2_TIM1_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
#define STM32L4_APB2_TIM15_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
#define STM32L4_APB2_TIM16_CLKIN (STM32L4_PCLK2_FREQUENCY)
|
||
|
||
#endif
|
||
|
||
/* The timer clock frequencies are automatically defined by hardware.
|
||
* If the APB prescaler equals 1, the timer clock frequencies are set to the
|
||
* same frequency as that of the APB domain. Otherwise they are set to twice.
|
||
* Note: TIM1,15,16 are on APB2, others on APB1
|
||
*/
|
||
|
||
#define BOARD_TIM1_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM2_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM3_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM4_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM5_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM6_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM7_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM15_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_TIM16_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_LPTIM1_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
#define BOARD_LPTIM2_FREQUENCY STM32L4_HCLK_FREQUENCY
|
||
|
||
/****************************************************************************
|
||
* Public Data
|
||
****************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
#define EXTERN extern "C"
|
||
extern "C"
|
||
{
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
/****************************************************************************
|
||
* Public Function Prototypes
|
||
****************************************************************************/
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __BOARDS_ARM_STM32L4_NUCLEO_L452RE_INCLUDE_NUCLEO_L452RE_H */
|