nuttx/configs/launchxl-tms57004/include/board.h

187 lines
5.9 KiB
C

/************************************************************************************
* configs/launchxl-tms57004/include/board.h
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_LAUNCHXL_TMS57004_INCLUDE_BOARD_H
#define __CONFIGS_LAUNCHXL_TMS57004_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# include <stdbool.h>
#endif
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The LaunchXL-TMS57004 has a 16 MHz external crystal. */
#define BOARD_FCLKIN_FREQUENCY 16000000 /* 16 MHz crystal frequency */
/* The maximum frequency for the TMS570LS0432PZ is 80 MHz.
*
* REFCLKDIV controls input clock divider:
*
* NR = REFCLKDIV+1
* Fintclk = Fclkin / NR
*
* PLLMUL controls multipler on divided input clock (Fintclk):
*
* Non-modulated:
* NF = (PLLMUL + 256) / 256
* Modulated:
* NF = (PLLMUL + MULMOD + 256) / 256
*
* Foutputclk = Fintclk x NF (150MHz - 550MHz)
*
* ODPLL controls internal PLL output divider:
*
* OD = ODPLL+1
* Fpostodclk = Foutputclock / OD
*
* Final divisor, R, controls PLL output:
*
* R = PLLDIV + 1
* Fpllclock = Fpostodclk / R
*
* Or:
*
* Fpllclock = = (Fclkin / NR) x NF / OD / R
*
* In this case, we have:
*
* Fclkin = 16,000,000
* NR = 6 (REFCLKDIV=5)
* NF = 120 (PLLMUL = 119 * 256)
* OD = 1 (ODPLL = 0)
* R = 2 (PLLDIV=1)
*
* Then:
*
* Fintclk = 16 MHz / 6 = 2.667 MHz
* Foutputclock = 2.667 MHz * 120 = 320 MHz
* Fpostodclock = 320 MHz / 2 = 160 MHz
* Fpllclock = 160 MHz / 2 = 80 MHz
*/
#define BOARD_PLL_NR 6 /* REFCLKDIV = 5 */
#define BOARD_PLL_NF 120 /* PLLMUL = 119 * 256 */
#define BOARD_PLL_OD 2 /* ODPLL = 1 */
#define BOARD_PLL_R 2 /* PLLDIV = 1 */
/* FLASH wait states */
#define BOARD_ASWAIT 0 /* No address setup wait states */
#define BOARD_RWAIT 1 /* One read access wait state */
#define BOARD_EWAIT 4 /* Four wait states for EEPROM access */
/* PIN Multiplexor Initializer ******************************************************/
/* You may specify one alternative from each set (the first is the default and,
* hence, could probably be omitted):
*
* 1. {GIOA0, SPI3nCS3}
* 2. {GIOA1, SPI3nCS2}
* 3. {GIOA2, SPI3nCS1}
* 4. {GIOA3, SPI2nCS3}
* 5. {GIOA4, SPI2nCS2}
* 6. {GIOA5, EXTCLKIN}
* 7. {GIOA6, SPI2nCS1, N2HET31}
* 8. {GIOA7, N2HET29}
* 9. {MIBSPI1nCS2, N2HET20, N2HET19}
* 10. {SPI3CLK, EQEPA}
* 11. {SPI3nENA, EQEPB}
* 12. {SPI3nCS0, EQEPI}}
* 13. {MIBSPI1nCS3, N2HET26}
* 14. {ADEVT, N2HET28}
* 15. {MIBSPI1nENA, N2HET23, NHET30}
* 16. {MIBSPI1nCS1, EQEPS, N2HET17}
*/
#define BOARD_PINMUX_INITIALIZER \
PINMUX_GIOA0_PIN, \
PINMUX_GIOA1_PIN, \
PINMUX_GIOA2_PIN, \
PINMUX_GIOA3_PIN, \
PINMUX_GIOA4_PIN, \
PINMUX_GIOA5_PIN, \
PINMUX_GIOA6_PIN, \
PINMUX_GIOA7_PIN, \
PINMUX_MIBSPI1NCS2_PIN, \
PINMUX_SPI3CLK_PIN, \
PINMUX_SPI3NENA_PIN, \
PINMUX_SPI3NCS0_PIN, \
PINMUX_MIBSPI1NCS3_PIN, \
PINMUX_ADEVT_PIN, \
PINMUX_MIBSPI1NENA_PIN, \
PINMUX_MIBSPI1NCS1_PIN
/* LED definitions ******************************************************************/
/* Button definitions ***************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_LAUNCHXL_TMS57004_INCLUDE_BOARD_H */