nuttx/configs/stm3210e-eval/src/up_extmem.c

/************************************************************************************
 * configs/stm3210e-eval/src/up_extmem.c
 * arch/arm/src/board/up_extmem.c
 *
 *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <assert.h>
#include <debug.h>

#include <arch/board/board.h>

#include "chip.h"
#include "up_arch.h"

#include "stm32_fsmc.h"
#include "stm32_gpio.h"
#include "stm32.h"
#include "stm3210e-internal.h"

/************************************************************************************
 * Pre-processor Definitions
 ************************************************************************************/

#ifndef CONFIG_STM32_FSMC
#  warning "FSMC is not enabled"
#endif

#if STM32_NGPIO_PORTS < 6
#  error "Required GPIO ports not enabled"
#endif

/************************************************************************************
 * Public Data
 ************************************************************************************/

/* 512Kx16 SRAM is connected to bank2 of the FSMC interface and both 8- and 16-bit
 * accesses are allowed by BLN0 and BLN1 connected to BLE and BHE of SRAM,
 * respectively.
 *
 * Pin Usage (per schematic)
 *
 *                         FLASH   SRAM    NAND    LCD
 *   D[0..15]              [0..15] [0..15] [0..7]  [0..15]
 *   A[0..23]              [0..22] [0..18] [16,17] [0]
 *   FSMC_NBL0  PE0   OUT  ~BLE    ---     ---     ---
 *   FSMC_NBL1  PE1   OUT  ~BHE    ---     ---     ---
 *   FSMC_NE2   PG9   OUT  ---     ~E      ---     ---
 *   FSMC_NE3   PG10  OUT  ~CE     ---     ---     ---
 *   FSMC_NE4   PG12  OUT  ---     ---     ---     ~CS
 *   FSMC_NWE   PD5   OUT  ~WE     ~W      ~W      ~WR/SCL
 *   FSMC_NOE   PD4   OUT  ~OE     ~G      ~R      ~RD
 *   FSMC_NWAIT PD6   IN   ---     R~B     ---     ---
 *   FSMC_INT2  PG6*  IN   ---     ---     R~B     ---
 *
 *   *JP7 will switch to PD6
 */

/* It would be much more efficient to brute force these all into the
 * the appropriate registers.  Just a little tricky.
 */

/* GPIO configurations common to SRAM and NOR Flash */

const uint16_t g_commonconfig[NCOMMON_CONFIG] =
{
  /* A0... A18 */

  GPIO_NPS_A0,  GPIO_NPS_A1,  GPIO_NPS_A2,  GPIO_NPS_A3,
  GPIO_NPS_A4,  GPIO_NPS_A5,  GPIO_NPS_A6,  GPIO_NPS_A7,
  GPIO_NPS_A8,  GPIO_NPS_A9,  GPIO_NPS_A10, GPIO_NPS_A11,
  GPIO_NPS_A12, GPIO_NPS_A13, GPIO_NPS_A14, GPIO_NPS_A15,
  GPIO_NPS_A16, GPIO_NPS_A17, GPIO_NPS_A18,

  /* D0... D15 */

  GPIO_NPS_D0,  GPIO_NPS_D1,  GPIO_NPS_D2,  GPIO_NPS_D3,
  GPIO_NPS_D4,  GPIO_NPS_D5,  GPIO_NPS_D6,  GPIO_NPS_D7,
  GPIO_NPS_D8,  GPIO_NPS_D9,  GPIO_NPS_D10, GPIO_NPS_D11,
  GPIO_NPS_D12, GPIO_NPS_D13, GPIO_NPS_D14, GPIO_NPS_D15,

  /* NOE, NWE  */

  GPIO_NPS_NOE, GPIO_NPS_NWE
};

/************************************************************************************
 * Private Data
 ************************************************************************************/

/************************************************************************************
 * Private Functions
 ************************************************************************************/

/************************************************************************************
 * Public Functions
 ************************************************************************************/

/************************************************************************************
 * Name: stm32_extmemgpios
 *
 * Description:
 *   Initialize GPIOs for NOR or SRAM
 *
 ************************************************************************************/

void stm32_extmemgpios(const uint16_t *gpios, int ngpios)
{
  int i;

  /* Configure GPIOs */

  for (i = 0; i < ngpios; i++)
    {
      stm32_configgpio(gpios[i]);
    }
}

/************************************************************************************
 * Name: stm32_enablefsmc
 *
 * Description:
 *  enable clocking to the FSMC module
 *
 ************************************************************************************/

void stm32_enablefsmc(void)
{
  uint32_t regval;

  /* Enable AHB clocking to the FSMC */

  regval  = getreg32( STM32_RCC_AHBENR);
  regval |= RCC_AHBENR_FSMCEN;
  putreg32(regval, STM32_RCC_AHBENR);
}

/************************************************************************************
 * Name: stm32_disablefsmc
 *
 * Description:
 *  enable clocking to the FSMC module
 *
 ************************************************************************************/

void stm32_disablefsmc(void)
{
  uint32_t regval;

  /* Enable AHB clocking to the FSMC */

  regval  = getreg32( STM32_RCC_AHBENR);
  regval &= ~RCC_AHBENR_FSMCEN;
  putreg32(regval, STM32_RCC_AHBENR);
}