| .. |
|
chip
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
gnu
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
iar
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
chip.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
Kconfig
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
Make.defs
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_1wire.c
|
STM32 1wire: Convert to use new interrupt argument infrastructure.
|
2017-02-28 08:39:02 -06:00 |
|
stm32_1wire.h
|
Costmetic changes from review of last PR
|
2016-05-25 18:04:39 -06:00 |
|
stm32_adc.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_adc.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_aes.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
stm32_aes.h
|
|
|
|
stm32_alarm.h
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
|
stm32_allocateheap.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_bbsram.c
|
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
|
2017-05-11 13:35:56 -06:00 |
|
stm32_bbsram.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_bkp.h
|
|
|
|
stm32_can.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_can.h
|
Move CAN subsystem to its own directory and put device drivers there
|
2017-05-12 11:48:47 -03:00 |
|
stm32_capture.c
|
Add argument to capture irq callback
|
2017-03-01 08:45:27 -06:00 |
|
stm32_capture.h
|
arch/: Remove dangling space at the end of lines.
|
2017-06-28 13:16:48 -06:00 |
|
stm32_ccm.c
|
Update some comments.
|
2017-02-26 09:15:57 -06:00 |
|
stm32_ccm.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_comp.c
|
Merge branch 'master' of bitbucket.org:nuttx/nuttx
|
2017-03-26 06:57:35 -06:00 |
|
stm32_comp.h
|
stm32 COMP: Logic in stm32_comp.h must be configured on CONFIG_STM32_COMP or otherwise it causes an error via #error on every platform without COMP support.
|
2017-04-09 11:47:57 -06:00 |
|
stm32_dac.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_dac.h
|
stm32f33xxx: Add DAC header file
|
2017-03-04 19:30:08 +01:00 |
|
stm32_dbgmcu.h
|
|
|
|
stm32_dma2d.c
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
stm32_dma2d.h
|
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
|
2017-02-28 18:37:44 -06:00 |
|
stm32_dma.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_dma.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_dumpgpio.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_eth.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_eth.h
|
|
|
|
stm32_exti_alarm.c
|
STM32/F7/L4: EXTI ALARM function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
|
2017-03-02 09:18:10 -06:00 |
|
stm32_exti_gpio.c
|
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
|
2017-03-02 16:34:37 -06:00 |
|
stm32_exti_pwr.c
|
STM3 L4: EXTI COMP function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
|
2017-03-02 09:03:12 -06:00 |
|
stm32_exti_pwr.h
|
STM32/F7/L4: EXOT PVD function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
|
2017-03-02 08:56:31 -06:00 |
|
stm32_exti.h
|
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
|
2017-03-02 16:34:37 -06:00 |
|
stm32_flash.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_flash.h
|
stm32: stm32_flash: add EEPROM writing for STM32L15XX
|
2017-04-04 07:38:49 -06:00 |
|
stm32_freerun.c
|
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
|
2017-05-08 12:33:15 -06:00 |
|
stm32_freerun.h
|
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
|
2017-05-08 12:33:15 -06:00 |
|
stm32_fsmc.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_gpio.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_gpio.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_hrtim.c
|
stm32f33xxx_rcc: cleanup + move hrtim clock source selection
|
2017-06-26 18:30:10 +02:00 |
|
stm32_hrtim.h
|
stm32_hrtim: fix initialization bug, minor changes
|
2017-06-18 18:06:37 +02:00 |
|
stm32_i2c_alt.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_i2c.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_i2c.h
|
Add basic support for the STM32F334
|
2017-02-26 12:39:44 +01:00 |
|
stm32_i2s.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_i2s.h
|
STM32F4: add cs43l22 audio driver and i2s driver
|
2017-05-21 14:14:09 -06:00 |
|
stm32_idle.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_irq.c
|
Cosmetic changes from review of last PR
|
2017-06-15 06:58:55 -06:00 |
|
stm32_iwdg.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_lowputc.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_lowputc.h
|
|
|
|
stm32_lse.c
|
Make stm32_pwr_enablebkp thread safe
|
2016-08-09 07:36:13 -06:00 |
|
stm32_lsi.c
|
|
|
|
stm32_ltdc.c
|
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
|
2017-05-11 13:35:56 -06:00 |
|
stm32_ltdc.h
|
|
|
|
stm32_mpuinit.c
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
|
stm32_mpuinit.h
|
|
|
|
stm32_oneshot_lowerhalf.c
|
Add a simulated oneshot lowerhalf driver
|
2016-08-12 13:14:03 -06:00 |
|
stm32_oneshot.c
|
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
|
2017-05-11 13:35:56 -06:00 |
|
stm32_oneshot.h
|
STM32L4: Port fix for multiple oneshot timers from STM32. Also fixes a few issues with original STM32 implementation.
|
2017-01-18 10:45:22 -06:00 |
|
stm32_opamp.c
|
STM32F33: Add OPAMP support
|
2017-04-30 11:05:34 +02:00 |
|
stm32_opamp.h
|
STM32F33: Add OPAMP support
|
2017-04-30 11:05:34 +02:00 |
|
stm32_otgfs.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
|
stm32_otgfsdev.c
|
Trivial spelling fix
|
2017-06-20 08:02:42 -06:00 |
|
stm32_otgfshost.c
|
This is based on a patch by Taras Drozdovsky. Basically, the delay that was added during the integration of the CDC/ACM host driver was interfering with streaming audio. That delay was put there to prevent build endpoints from hogging the system bandwidth. So what do we do? Do we hog the bandwidth or do we insert arbitrarity delays. I think both ideas such.
|
2017-05-21 14:28:29 -06:00 |
|
stm32_otghs.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
|
stm32_otghsdev.c
|
Minor change for consistency with a previous commit.
|
2017-03-12 07:20:10 -06:00 |
|
stm32_otghshost.c
|
This is based on a patch by Taras Drozdovsky. Basically, the delay that was added during the integration of the CDC/ACM host driver was interfering with streaming audio. That delay was put there to prevent build endpoints from hogging the system bandwidth. So what do we do? Do we hog the bandwidth or do we insert arbitrarity delays. I think both ideas such.
|
2017-05-21 14:28:29 -06:00 |
|
stm32_pm.h
|
Cosmetic: Move # of pre-processior command to column 1
|
2015-09-05 09:07:37 -06:00 |
|
stm32_pminitialize.c
|
|
|
|
stm32_pmsleep.c
|
|
|
|
stm32_pmstandby.c
|
|
|
|
stm32_pmstop.c
|
|
|
|
stm32_procfs_ccm.c
|
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
|
2016-06-11 15:50:49 -06:00 |
|
stm32_pwm.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_pwm.h
|
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
|
2016-07-20 13:48:24 -06:00 |
|
stm32_pwr.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_pwr.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_qencoder.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_qencoder.h
|
|
|
|
stm32_rcc.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_rcc.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_rng.c
|
STM32 RNG: Fix semaphore initial value and disable priority inheritance
|
2017-03-29 07:12:19 -06:00 |
|
stm32_rtc_lowerhalf.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_rtc.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_rtc.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_rtcc.c
|
Cosmetic changes from review of last PR
|
2017-06-15 06:58:55 -06:00 |
|
stm32_rtcounter.c
|
arch/: Remove dangling space at the end of lines.
|
2017-06-28 13:16:48 -06:00 |
|
stm32_sdadc.c
|
arch/: Remove dangling space at the end of lines.
|
2017-06-28 13:16:48 -06:00 |
|
stm32_sdadc.h
|
arch/: Remove dangling space at the end of lines.
|
2017-06-28 13:16:48 -06:00 |
|
stm32_sdio.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_sdio.h
|
|
|
|
stm32_serial.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_spi.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_spi.h
|
More missed enum spi_dev_e forward references.
|
2017-04-29 08:29:01 -06:00 |
|
stm32_start.c
|
I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.
|
2016-07-14 07:29:39 -06:00 |
|
stm32_syscfg.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_tickless.c
|
arch/: Remove dangling space at the end of lines.
|
2017-06-28 13:16:48 -06:00 |
|
stm32_tim_lowerhalf.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_tim.c
|
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
|
2017-05-08 12:33:15 -06:00 |
|
stm32_tim.h
|
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
|
2017-05-08 12:33:15 -06:00 |
|
stm32_timerisr.c
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
stm32_uart.h
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32_uid.c
|
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
|
2015-11-18 14:33:27 -06:00 |
|
stm32_uid.h
|
Changes to last merge from review for compliance to coding standards
|
2015-11-17 21:10:17 -06:00 |
|
stm32_usbdev.c
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
stm32_usbdev.h
|
|
|
|
stm32_usbhost.c
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:42:29 -06:00 |
|
stm32_usbhost.h
|
Fix broken build. Previous commit removed a file that was being used.
|
2016-12-06 09:03:00 -06:00 |
|
stm32_userspace.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32_userspace.h
|
|
|
|
stm32_waste.c
|
|
|
|
stm32_waste.h
|
STM32, STM32F7, STM32L4: Remove incorrect comment about STM32L1 LSE/RTC/LCD
|
2017-04-27 07:18:36 -06:00 |
|
stm32_wdg.h
|
|
|
|
stm32_wwdg.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32.h
|
STM32F33: Fix hrtim definitions, Add beginning of HRTIM driver
|
2017-06-11 10:49:20 -06:00 |
|
stm32f10xxx_dma.c
|
STM32F33: Move DMA logic to a separate files
|
2017-03-18 16:31:06 +01:00 |
|
stm32f10xxx_rcc.c
|
Fix for F1 RTC Clock, tested on F103
|
2016-11-25 06:17:18 +01:00 |
|
stm32f20xxx_dma.c
|
Convert remaining serial drivers to use use irq_attach.
|
2017-02-27 10:27:14 -06:00 |
|
stm32f20xxx_rcc.c
|
STM32 OTG HS: A little research reveals that only the F2 RCC initialization set the OTGHSULPIEN bit and Photon is the only F2 board configuration that uses OTG . Therefore, we can simplify the conditional logic of the last PR. Negative logic was used (#ifndef BOARD_DISABLE_USBOTG_HSULPI) to prevent bad settings in other configurations. But give these facts, the preferred positive logic now makes more sense (#ifdef BOARD_ENABLE_USBOTG_HSULPI).
|
2017-03-11 18:00:38 -06:00 |
|
stm32f30xxx_i2c.c
|
stm32_i2c: make private symbols static
|
2017-05-19 07:16:01 -06:00 |
|
stm32f30xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32f33xxx_dma.c
|
STM32F33: Move DMA logic to a separate files
|
2017-03-18 16:31:06 +01:00 |
|
stm32f33xxx_rcc.c
|
stm32f33xxx_rcc: cleanup + move hrtim clock source selection
|
2017-06-26 18:30:10 +02:00 |
|
stm32f37xxx_rcc.c
|
arch/: Remove dangling space at the end of lines.
|
2017-06-28 13:16:48 -06:00 |
|
stm32f40xxx_alarm.h
|
Update some comments.
|
2017-02-26 09:15:57 -06:00 |
|
stm32f40xxx_dma.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32f40xxx_i2c.c
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
stm32f40xxx_rcc.c
|
STM32 OTG HS: A little research reveals that only the F2 RCC initialization set the OTGHSULPIEN bit and Photon is the only F2 board configuration that uses OTG . Therefore, we can simplify the conditional logic of the last PR. Negative logic was used (#ifndef BOARD_DISABLE_USBOTG_HSULPI) to prevent bad settings in other configurations. But give these facts, the preferred positive logic now makes more sense (#ifdef BOARD_ENABLE_USBOTG_HSULPI).
|
2017-03-11 18:00:38 -06:00 |
|
stm32f40xxx_rtcc.c
|
stm32f40xxx_rtcc ISR register and write protection fix
|
2017-07-03 11:06:07 -06:00 |
|
stm32l15xxx_rcc.c
|
STM32 L1: stm32l15xx_rcc: Allow board to configure HSE clock in bypass-mode. Allows using MCO output from ST-link chip (on Nucleo and Discovery boards) as HSE input.
|
2017-04-20 06:28:01 -06:00 |
