.. |
chip
|
Fix email address in file headers
|
2016-06-09 08:26:14 -06:00 |
gnu
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
iar
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
chip.h
|
Add stm32f105r support
|
2016-06-06 12:52:41 -07:00 |
Kconfig
|
Add stm32f105r support
|
2016-06-06 12:52:41 -07:00 |
Make.defs
|
KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc
|
2016-06-04 11:29:27 -06:00 |
stm32_1wire.c
|
1-wire: Initialization/uninitialization functions are not use MCU-independent up_ naming. Should use STM32-specific stm32_ naming. These are not globally accessible but only accessible from STM32 board logic.
|
2016-05-25 17:56:47 -06:00 |
stm32_1wire.h
|
Costmetic changes from review of last PR
|
2016-05-25 18:04:39 -06:00 |
stm32_adc.c
|
Fix the Value Line adc IRQ number selection
|
2016-05-31 14:54:04 -10:00 |
stm32_adc.h
|
STM32 ADC: Add DMA support for STM32F30xxx
|
2015-12-22 03:42:37 -05:00 |
stm32_aes.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_aes.h
|
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
|
2015-02-04 06:49:05 -06:00 |
stm32_alarm.h
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
stm32_allocateheap.c
|
Rename board_led_on to board_autoled_on
|
2015-11-01 09:07:06 -06:00 |
stm32_bbsram.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_bbsram.h
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
stm32_bkp.h
|
|
|
stm32_can.c
|
STM32 CAN: Add support for both RX FIFOs
|
2016-05-25 16:11:18 -04:00 |
stm32_can.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_capture.c
|
Correct conditional compilation in STM32 timer cpature logic
|
2016-06-03 08:41:53 -06:00 |
stm32_capture.h
|
A few more cosmetic changes
|
2015-12-24 07:38:17 -06:00 |
stm32_ccm.c
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
stm32_ccm.h
|
Clean up some naming
|
2015-12-01 15:04:12 -06:00 |
stm32_dac.c
|
STM32 Timer: Generalize and extend calculation of per-timer pre-scaler value. Inspired by original proposal from Pierre-noel Bouteville.
|
2016-06-03 11:38:59 -06:00 |
stm32_dac.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_dbgmcu.h
|
|
|
stm32_dma2d.c
|
FB: Add a display number to the framebuffer planeinfo structure
|
2016-04-17 10:08:27 -06:00 |
stm32_dma2d.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
stm32_dma.c
|
Fix STM32 DMA code and configuration for STM32F37X chips
|
2016-06-09 05:02:43 +02:00 |
stm32_dma.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_dumpgpio.c
|
Fix a typo introduced in last set of name changes
|
2016-02-14 19:58:30 -06:00 |
stm32_eth.c
|
Replace confusing references to uIP with just 'the network'
|
2016-05-30 09:16:32 -06:00 |
stm32_eth.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_exti_alarm.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
stm32_exti_gpio.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
stm32_exti_pwr.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
stm32_exti_pwr.h
|
STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.
|
2015-04-28 06:37:59 -06:00 |
stm32_exti.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_flash.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_flash.h
|
|
|
stm32_fsmc.h
|
Fix typo
|
2015-09-10 21:07:03 -04:00 |
stm32_getc.c
|
Update some comments
|
2016-06-04 13:04:13 -06:00 |
stm32_getc.h
|
KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc
|
2016-06-04 11:29:27 -06:00 |
stm32_gpio.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_gpio.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_i2c_alt.c
|
It is too late to be doing this... Fix the spacing error introduced with the second correction to the spelling error
|
2016-02-24 17:56:40 -06:00 |
stm32_i2c.c
|
It is too late to be doing this... Fix the spacing error introduced with the second correction to the spelling error
|
2016-02-24 17:56:40 -06:00 |
stm32_i2c.h
|
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
|
2016-02-02 12:08:23 -06:00 |
stm32_idle.c
|
PM: Add domain to all PM interfaces. Internal PM data structures now handle multiple PM domains.
|
2016-03-27 13:01:32 -06:00 |
stm32_irq.c
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
stm32_iwdg.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_lowputc.c
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
stm32_lowputc.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_lse.c
|
Fix an error introduced into stm32_pwr_enablebkp(). That function must preserve the previous state of backup domain access on return.
|
2015-04-18 07:31:20 -06:00 |
stm32_lsi.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
stm32_ltdc.c
|
FB: Add a display number to the framebuffer planeinfo structure
|
2016-04-17 10:08:27 -06:00 |
stm32_ltdc.h
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
stm32_mpuinit.c
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
stm32_mpuinit.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
stm32_otgfs.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_otgfsdev.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_otgfshost.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_otghs.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
stm32_otghsdev.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_otghshost.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_pm.h
|
Cosmetic: Move # of pre-processior command to column 1
|
2015-09-05 09:07:37 -06:00 |
stm32_pminitialize.c
|
|
|
stm32_pmsleep.c
|
|
|
stm32_pmstandby.c
|
|
|
stm32_pmstop.c
|
|
|
stm32_procfs_ccm.c
|
STM32: CCM procfs more typos
|
2015-12-01 16:28:14 -06:00 |
stm32_pwm.c
|
STM32 PWM: More review changes from last commit; improve handling of unsigned types
|
2016-06-05 16:01:29 -06:00 |
stm32_pwm.h
|
STM32 PWM: Add support for multiple output channels
|
2015-11-01 17:11:35 -05:00 |
stm32_pwr.c
|
Correct description of some input parameters. Suggested by Pelle Windestam
|
2015-05-05 06:26:59 -06:00 |
stm32_pwr.h
|
Correct description of some input parameters. Suggested by Pelle Windestam
|
2015-05-05 06:26:59 -06:00 |
stm32_qencoder.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_qencoder.h
|
|
|
stm32_rcc.c
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_rcc.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_rng.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_rtc_lowerhalf.c
|
alarm 10 now runs to completion
|
2016-05-31 14:17:52 -07:00 |
stm32_rtc.c
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
stm32_rtc.h
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
stm32_rtcc.c
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
stm32_rtcounter.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_sdio.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_sdio.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_serial.c
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
stm32_spi.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_spi.h
|
For STM32, rename up_spiinitialize to stm32_spibus_initialize
|
2016-01-26 12:22:27 -06:00 |
stm32_start.c
|
ARMv7-M: Add support for the IAR compiler
|
2016-04-02 08:14:09 -06:00 |
stm32_syscfg.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_tim_lowerhalf.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_tim.c
|
Use DEBUG assertions to save space
|
2016-06-03 14:49:05 -06:00 |
stm32_tim.h
|
Revert "add timer capture STM32"
|
2015-12-22 13:27:42 +01:00 |
stm32_timerisr.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_uart.h
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
stm32_uid.c
|
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
|
2015-11-18 14:33:27 -06:00 |
stm32_uid.h
|
Changes to last merge from review for compliance to coding standards
|
2015-11-17 21:10:17 -06:00 |
stm32_usbdev.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_usbdev.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_usbhost.c
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:42:29 -06:00 |
stm32_usbhost.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
stm32_userspace.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_userspace.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
stm32_waste.c
|
|
|
stm32_waste.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_wdg.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_wwdg.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32.h
|
KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc
|
2016-06-04 11:29:27 -06:00 |
stm32f10xxx_dma.c
|
Fix STM32 DMA code and configuration for STM32F37X chips
|
2016-06-09 05:02:43 +02:00 |
stm32f10xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32f20xxx_dma.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32f20xxx_rcc.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32f30xxx_i2c.c
|
It is too late to be doing this... Fix the spacing error introduced with the second correction to the spelling error
|
2016-02-24 17:56:40 -06:00 |
stm32f30xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32f37xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32f40xxx_alarm.h
|
RTC lower half was missing call to F4 alarm cancel function
|
2016-04-04 08:23:09 -06:00 |
stm32f40xxx_dma.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32f40xxx_rcc.c
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32f40xxx_rtcc.c
|
STM32 F4 RTC: I believe that the F405/407 has only a single alarm. Not sure.
|
2016-06-02 15:04:23 -06:00 |
stm32l15xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |