Juha Niskanen 4a32325e3c stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL		2018-10-10 06:29:29 -06:00
..
chip	arm/src/stm32f0/chip/stm32f0_rcc.h: Fix some typos.	2018-07-26 08:31:40 -06:00
chip.h
Kconfig	drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations.	2018-08-05 17:58:17 -06:00
Make.defs	arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM	2018-05-07 10:13:20 -06:00
stm32f0_clockconfig.c	STM32F0: Fix some missing settings in the clock configuration logic	2017-04-27 15:44:05 -06:00
stm32f0_clockconfig.h
stm32f0_gpio.c	Make sure that labeling is used consistently in all function headers.	2018-02-01 10:00:02 -06:00
stm32f0_gpio.h	Make sure that labeling is used consistently in all function headers.	2018-02-01 10:00:02 -06:00
stm32f0_hsi48.c	arch/: Remove dangling space at the end of lines.	2017-06-28 13:16:48 -06:00
stm32f0_hsi48.h	arch/: Remove dangling space at the end of lines.	2017-06-28 13:16:48 -06:00
stm32f0_i2c.c	Replace all ASSERT with DEBUGASSERT to save the code space	2018-08-24 06:58:30 -06:00
stm32f0_i2c.h	Make sure that labeling is used consistently in all function headers.	2018-02-01 10:00:02 -06:00
stm32f0_idle.c
stm32f0_irq.c
stm32f0_lowputc.c	Nucleo-F072RB: Various fixes to get the first clean build.	2017-04-18 10:37:05 -06:00
stm32f0_lowputc.h
stm32f0_rcc.h	STM32F0: Add support for HSI48	2017-04-20 11:08:23 -06:00
stm32f0_serial.c	stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL	2018-10-10 06:29:29 -06:00
stm32f0_serial.h	More changes UART to USART. Fix garbage code in stm32f0_serial.h that was clearing HAVE_USART	2017-04-17 18:37:52 -06:00
stm32f0_start.c	More changes UART to USART. Fix garbage code in stm32f0_serial.h that was clearing HAVE_USART	2017-04-17 18:37:52 -06:00
stm32f0_start.h	STM32F0: type of regval should be uint32_t in clockconfig(). Fix a warning from __start().	2017-04-17 09:17:31 -06:00
stm32f0_timerisr.c	Fix System Clock value to 48MHz and remove MCLK definition	2017-04-17 12:48:07 -06:00
stm32f0_uart.h	STM32F0: Add some protection. There is only one interrupt for USART3-8. Current interrupt handling logic will support only one interrupt in that range.	2017-04-29 12:58:06 -06:00
stm32f0_usbdev.c	STM32F0: Add an untested port of the F1 USB device to the STM32F0	2017-04-20 11:50:58 -06:00
stm32f0_usbdev.h	STM32F0: Add an untested port of the F1 USB device to the STM32F0	2017-04-20 11:50:58 -06:00