nuttx

History

patacongo 330b89ca0e Add kconfig documentation git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3		2012-04-06 16:45:52 +00:00
..
console.c	Move include/sercomm to include/nuttx/sercomm	2012-03-24 18:33:21 +00:00
Kconfig	Add kconfig documentation	2012-04-06 16:45:52 +00:00
loadwriter.py	Add support for compal e99 and e88 phones	2012-03-24 17:27:38 +00:00
Make.defs	A few more Calypso/Compal updates	2012-03-24 18:14:23 +00:00
README.txt	Additional documentation/README updates	2012-03-24 22:39:52 +00:00
uart.c	Move include/sercomm to include/nuttx/sercomm	2012-03-24 18:33:21 +00:00
uart.h	Add support for compal e99 and e88 phones	2012-03-24 17:27:38 +00:00

README.txt

drivers/sercomm README
======================

If CONFIG_SERCOMM_CONSOLE is defined in the NuttX configuration file, NuttX
will attempt to use sercomm (HDLC protocol) to communicate with the
host system. Sercomm is the transport used by osmocom-bb that runs on top
of serial.  See http://bb.osmocom.org/trac/wiki/nuttx-bb/run for detailed
the usage of nuttx with sercomm.

The drivers/sercomm build that you have the osmocom-bb project directory
at same level as the nuttx project:

  |- nuttx
  |- apps
  `- osmocom-bb

If you attempt to build this driver without osmocom-bb, you will get
compilation errors  because ofheader files that are needed from the
osmocom-bb directory.