sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4ab2a3661e
nuttx/drivers/audio/wm8904_debug.c
Gregory Nutt cf14f8d1b5 drivers/: Fixes to spacing and alignement
2015-10-10 10:41:00 -06:00

440 lines
16 KiB
C
Raw Blame History

/****************************************************************************
* drivers/audio/wm8904_debug.c
*
* Audio device driver for Wolfson Microelectronics WM8904 Audio codec.
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - "WM8904 Ultra Low Power CODEC for Portable Audio Applications, Pre-
* Production", September 2012, Rev 3.3, Wolfson Microelectronics
*
* - The framework for this driver is based on Ken Pettit's VS1053 driver.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <assert.h>
#include <fixedmath.h>
#include <syslog.h>
#include <nuttx/audio/audio.h>
#include <nuttx/audio/wm8904.h>
#include "wm8904.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
#ifdef CONFIG_WM8904_REGDUMP
struct wb8904_regdump_s
{
FAR const char *regname;
uint8_t regaddr;
};
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_WM8904_REGDUMP
static const struct wb8904_regdump_s g_wm8904_debug[] =
{
{"ID", WM8904_ID },
{"BIAS_CTRL", WM8904_BIAS_CTRL },
{"VMID_CTRL", WM8904_VMID_CTRL },
{"MIC_BIAS_CTRL0", WM8904_MIC_BIAS_CTRL0 },
{"MIC_BIAS_CTRL1", WM8904_MIC_BIAS_CTRL1 },
{"ANALOG_ADC", WM8904_ANALOG_ADC },
{"PM0", WM8904_PM0 },
{"PM2", WM8904_PM2 },
{"PM3", WM8904_PM3 },
{"PM6", WM8904_PM6 },
{"CLKRATE0", WM8904_CLKRATE0 },
{"CLKRATE1", WM8904_CLKRATE1 },
{"CLKRATE2", WM8904_CLKRATE2 },
{"AIF0", WM8904_AIF0 },
{"AIF1", WM8904_AIF1 },
{"AIF2", WM8904_AIF2 },
{"AIF3", WM8904_AIF3 },
{"DAC_VOL_LEFT", WM8904_DAC_VOL_LEFT },
{"DAC_VOL_RIGHT", WM8904_DAC_VOL_RIGHT },
{"DAC_DIGI0", WM8904_DAC_DIGI0 },
{"DAC_DIGI1", WM8904_DAC_DIGI1 },
{"ADC_VOL_LEFT", WM8904_ADC_VOL_LEFT },
{"ADC_VOL_RIGHT", WM8904_ADC_VOL_RIGHT },
{"ADC_DIGI", WM8904_ADC_DIGI },
{"MIC_DIGI", WM8904_MIC_DIGI },
{"DRC0", WM8904_DRC0 },
{"DRC1", WM8904_DRC1 },
{"DRC2", WM8904_DRC2 },
{"DRC3", WM8904_DRC3 },
{"ANA_LEFT_IN0", WM8904_ANA_LEFT_IN0 },
{"ANA_RIGHT_IN0", WM8904_ANA_RIGHT_IN0 },
{"ANA_LEFT_IN1", WM8904_ANA_LEFT_IN1 },
{"ANA_RIGHT_IN1", WM8904_ANA_RIGHT_IN1 },
{"ANA_LEFT_OUT1", WM8904_ANA_LEFT_OUT1 },
{"ANA_RIGHT_OUT1", WM8904_ANA_RIGHT_OUT1 },
{"ANA_LEFT_OUT2", WM8904_ANA_LEFT_OUT2 },
{"ANA_RIGHT_OUT2", WM8904_ANA_RIGHT_OUT2 },
{"ANA_OUT12_ZC", WM8904_ANA_OUT12_ZC },
{"DC_SERVO0", WM8904_DC_SERVO0 },
{"DC_SERVO1", WM8904_DC_SERVO1 },
{"DC_SERVO2", WM8904_DC_SERVO2 },
{"DC_SERVO4", WM8904_DC_SERVO4 },
{"DC_SERVO5", WM8904_DC_SERVO5 },
{"DC_SERVO6", WM8904_DC_SERVO6 },
{"DC_SERVO7", WM8904_DC_SERVO7 },
{"DC_SERVO8", WM8904_DC_SERVO8 },
{"DC_SERVO9", WM8904_DC_SERVO9 },
{"DC_SERVO_RDBACK", WM8904_DC_SERVO_RDBACK },
{"ANA_HP0", WM8904_ANA_HP0 },
{"ANA_LINEOUT0", WM8904_ANA_LINEOUT0 },
{"CHG_PUMP0", WM8904_CHG_PUMP0 },
{"CLASS_W0", WM8904_CLASS_W0 },
{"WR_SEQ0", WM8904_WR_SEQ0 },
{"WR_SEQ1", WM8904_WR_SEQ1 },
{"WR_SEQ2", WM8904_WR_SEQ2 },
{"WR_SEQ3", WM8904_WR_SEQ3 },
{"WR_SEQ4", WM8904_WR_SEQ4 },
{"FLL_CTRL1", WM8904_FLL_CTRL1 },
{"FLL_CTRL2", WM8904_FLL_CTRL2 },
{"FLL_CTRL3", WM8904_FLL_CTRL3 },
{"FLL_CTRL4", WM8904_FLL_CTRL4 },
{"FLL_CTRL5", WM8904_FLL_CTRL5 },
{"GPIO_CTRL1", WM8904_GPIO_CTRL1 },
{"GPIO_CTRL2", WM8904_GPIO_CTRL2 },
{"GPIO_CTRL3", WM8904_GPIO_CTRL3 },
{"GPIO_CTRL4", WM8904_GPIO_CTRL4 },
{"DIGI_PULLS", WM8904_DIGI_PULLS },
{"INT_STATUS", WM8904_INT_STATUS },
{"INT_MASK", WM8904_INT_MASK },
{"INT_POL", WM8904_INT_POL },
{"INT_DEBOUNCE", WM8904_INT_DEBOUNCE },
{"EQ1", WM8904_EQ1 },
{"EQ2", WM8904_EQ2 },
{"EQ3", WM8904_EQ3 },
{"EQ4", WM8904_EQ4 },
{"EQ5", WM8904_EQ5 },
{"EQ6", WM8904_EQ6 },
{"EQ7", WM8904_EQ7 },
{"EQ8", WM8904_EQ8 },
{"EQ9", WM8904_EQ9 },
{"EQ10", WM8904_EQ10 },
{"EQ11", WM8904_EQ11 },
{"EQ12", WM8904_EQ12 },
{"EQ13", WM8904_EQ13 },
{"EQ14", WM8904_EQ14 },
{"EQ15", WM8904_EQ15 },
{"EQ16", WM8904_EQ16 },
{"EQ17", WM8904_EQ17 },
{"EQ18", WM8904_EQ18 },
{"EQ19", WM8904_EQ19 },
{"EQ20", WM8904_EQ20 },
{"EQ21", WM8904_EQ21 },
{"EQ22", WM8904_EQ22 },
{"EQ23", WM8904_EQ23 },
{"EQ24", WM8904_EQ24 },
{"ADC_TEST", WM8904_ADC_TEST },
{"FLL_NCO_TEST0", WM8904_FLL_NCO_TEST0 },
{"FLL_NCO_TEST1", WM8904_FLL_NCO_TEST1 }
};
# define WM8904_NREGISTERS (sizeof(g_wm8904_debug)/sizeof(struct wb8904_regdump_s))
#endif /* CONFIG_WM8904_REGDUMP */
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: wm8904_dump_registers
*
* Description:
* Dump the contents of all WM8904 registers to the syslog device
*
* Input Parameters:
* dev - The device instance returned by wm8904_initialize
*
* Returned Value:
* None.
*
****************************************************************************/
#ifdef CONFIG_WM8904_REGDUMP
void wm8904_dump_registers(FAR struct audio_lowerhalf_s *dev,
FAR const char *msg)
{
int i;
syslog(LOG_INFO, "WM8904 Registers: %s\n", msg);
for (i = 0; i < WM8904_NREGISTERS; i++)
{
syslog(LOG_INFO, "%16s[%02x]: %04x\n",
g_wm8904_debug[i].regname, g_wm8904_debug[i].regaddr,
wm8904_readreg((FAR struct wm8904_dev_s *)dev,
g_wm8904_debug[i].regaddr));
}
}
#endif /* CONFIG_WM8904_REGDUMP */
/****************************************************************************
* Name: wm8904_clock_analysis
*
* Description:
* Analyze the settings in the clock chain and dump to syslog.
*
* Input Parameters:
* dev - The device instance returned by wm8904_initialize
*
* Returned Value:
* None.
*
****************************************************************************/
#ifdef CONFIG_WM8904_CLKDEBUG
void wm8904_clock_analysis(FAR struct audio_lowerhalf_s *dev,
FAR const char *msg)
{
FAR struct wm8904_dev_s *priv = (FAR struct wm8904_dev_s *)dev;
uint32_t sysclk;
uint32_t bclk;
uint32_t lrclk;
uint16_t regval;
unsigned int tmp;
double ftmp;
syslog(LOG_INFO, "WM8904 Clock Analysis: %s\n", msg);
DEBUGASSERT(priv && priv->lower);
syslog(LOG_INFO, " MCLK: %lu Hz\n",
(unsigned long)priv->lower->mclk);
/* Is the SYSCLK source the FLL? Or MCK? */
regval = wm8904_readreg(priv, WM8904_CLKRATE2);
if ((regval & WM8904_SYSCLK_SRC) == WM8904_SYSCLK_SRCMCLK)
{
/* The SYSCLK divider bypasses the FLL and takes its input
* directly from MCLK.
*/
sysclk = priv->lower->mclk;
syslog(LOG_INFO, " SYSCLK Source: MCLK (%s)\n",
(regval & WM8904_MCLK_INV) != 0 ? "inverted" : "not inverted");
}
else
{
uint32_t fref;
uint32_t fvco;
uint32_t fout;
unsigned int outdiv;
unsigned int frndx;
unsigned int flln;
unsigned int fllk;
unsigned int fratio;
double nk;
/* Assume that the Fref input to the FLL is MCLK */
fref = priv->lower->mclk;
/* Now get the real FLL input source */
regval = wm8904_readreg(priv, WM8904_FLL_CTRL5);
switch (regval & WM8904_FLL_CLK_REF_SRC_MASK)
{
case WM8904_FLL_CLK_REF_SRC_MCLK:
syslog(LOG_INFO, " FLL Source: MCLK\n");
break;
case WM8904_FLL_CLK_REF_SRC_BCLK:
syslog(LOG_INFO, " ERROR: FLL source is BCLK: %04x\n",
regval);
break;
case WM8904_FLL_CLK_REF_SRC_LRCLK:
syslog(LOG_INFO, " ERROR: FLL source is LRCLK: %04x\n",
regval);
break;
default:
syslog(LOG_INFO, " ERROR: Unrecognized FLL source: %04x\n",
regval);
}
syslog(LOG_INFO, " Fref: %lu Hz (before divider)\n",
fref);
switch (regval & WM8904_FLL_CLK_REF_DIV_MASK)
{
case WM8904_FLL_CLK_REF_DIV1:
syslog(LOG_INFO, " FLL_CLK_REF_DIV: 1\n");
break;
case WM8904_FLL_CLK_REF_DIV2:
syslog(LOG_INFO, " FLL_CLK_REF_DIV: 2\n");
fref >>= 1;
break;
case WM8904_FLL_CLK_REF_DIV4:
syslog(LOG_INFO, " FLL_CLK_REF_DIV: 4\n");
fref >>= 2;
break;
case WM8904_FLL_CLK_REF_DIV8:
syslog(LOG_INFO, " FLL_CLK_REF_DIV: 8\n");
fref >>= 3;
break;
}
syslog(LOG_INFO, " Fref: %lu Hz (after divider)\n", fref);
regval = wm8904_readreg(priv, WM8904_FLL_CTRL2);
frndx = (regval & WM8904_FLL_FRATIO_MASK) >> WM8904_FLL_FRATIO_SHIFT;
tmp = (regval & WM8904_FLL_CTRL_RATE_MASK) >> WM8904_FLL_CTRL_RATE_SHIFT;
outdiv = ((regval & WM8904_FLL_OUTDIV_MASK) >> WM8904_FLL_OUTDIV_SHIFT) + 1;
syslog(LOG_INFO, " FLL_CTRL_RATE: Fvco / %u\n", tmp + 1);
regval = wm8904_readreg(priv, WM8904_FLL_CTRL4);
flln = (regval & WM8904_FLL_N_MASK) >> WM8904_FLL_N_SHIFT;
tmp = (regval & WM8904_FLL_GAIN_MASK) >> WM8904_FLL_GAIN_SHIFT;
syslog(LOG_INFO, " FLL_GAIN: %u\n", (1 << tmp));
fllk = wm8904_readreg(priv, WM8904_FLL_CTRL3);
nk = (double)flln + ((double)fllk / 65536.0);
fratio = g_fllratio[frndx];
syslog(LOG_INFO, " FLL_FRATIO: %u\n", fratio);
syslog(LOG_INFO, " FLL_OUTDIV: %u\n", outdiv);
syslog(LOG_INFO, " FLL_N.K: %u.%05u\n", flln, fllk);
ftmp = nk * (double)fref * (double)fratio;
fvco = (uint32_t)ftmp;
syslog(LOG_INFO, " Fvco: %lu Hz\n", (unsigned long)fvco);
fout = fvco / outdiv;
syslog(LOG_INFO, " Fout: %lu Hz\n", (unsigned long)fout);
regval = wm8904_readreg(priv, WM8904_FLL_CTRL1);
syslog(LOG_INFO, " FLL_FRACN_ENA: %s\n",
(regval & WM8904_FLL_FRACN_ENA) != 0 ? "Enabled" : "Disabled");
syslog(LOG_INFO, " FLL_OSC_ENA: %s\n",
(regval & WM8904_FLL_OSC_ENA) != 0 ? "Enabled" : "Disabled");
syslog(LOG_INFO, " FLL_ENA: %s\n",
(regval & WM8904_FLL_ENA) != 0 ? "Enabled" : "Disabled");
if ((regval & WM8904_FLL_ENA) == 0)
{
syslog(LOG_INFO, " No SYSCLK\n");
return;
}
sysclk = fout;
}
syslog(LOG_INFO, " SYSCLK: %lu Hz (before divider)\n",
(unsigned long)sysclk);
regval = wm8904_readreg(priv, WM8904_CLKRATE0);
if ((regval & WM8904_MCLK_DIV) == WM8904_MCLK_DIV1)
{
syslog(LOG_INFO, " MCLK_DIV: 1\n");
}
else
{
syslog(LOG_INFO, " MCLK_DIV: 2\n");
sysclk >>= 1;
}
syslog(LOG_INFO, " SYSCLK: %lu (after divider)\n", (unsigned long)sysclk);
regval = wm8904_readreg(priv, WM8904_CLKRATE2);
syslog(LOG_INFO, " CLK_SYS_ENA: %s\n",
(regval & WM8904_CLK_SYS_ENA) != 0 ? "Enabled" : "Disabled");
if ((regval & WM8904_CLK_SYS_ENA) == 0)
{
syslog(LOG_INFO, " No SYSCLK\n");
return;
}
regval = wm8904_readreg(priv, WM8904_AIF2);
tmp = (regval & WM8904_BCLK_DIV_MASK) >> WM8904_BCLK_DIV_SHIFT;
tmp = g_sysclk_scaleb1[tmp];
ftmp = (double)tmp / 2.0;
syslog(LOG_INFO, " BCLK_DIV: SYSCLK / %u.%01u\n",
(unsigned int)(tmp >> 1), (unsigned int)(5 * (tmp & 1)));
bclk = (uint32_t)(sysclk / ftmp);
syslog(LOG_INFO, " BCLK: %lu Hz\n", (unsigned long)bclk);
regval = wm8904_readreg(priv, WM8904_AIF1);
syslog(LOG_INFO, " BCLK_DIR: %s\n",
(regval & WM8904_BCLK_DIR) != 0 ? "Output" : "Input");
regval = wm8904_readreg(priv, WM8904_AIF3);
tmp = (regval & WM8904_LRCLK_RATE_MASK) >> WM8904_LRCLK_RATE_SHIFT;
lrclk = bclk / tmp;
syslog(LOG_INFO, " LRCLK_RATE: BCLK / %lu\n", (unsigned long)tmp);
syslog(LOG_INFO, " LRCLK: %lu Hz\n", (unsigned long)lrclk);
syslog(LOG_INFO, " LRCLK_DIR: %s\n",
(regval & WM8904_LRCLK_DIR) != 0 ? "Output" : "Input");
}
#endif /* CONFIG_WM8904_CLKDEBUG */
Reference in New Issue View Git Blame Copy Permalink