| .. |
|
a1x
|
Squashed commit of the following:
|
2018-06-21 10:59:58 -06:00 |
|
arm
|
Replace all ASSERT with DEBUGASSERT to save the code space
|
2018-08-24 06:58:30 -06:00 |
|
armv6-m
|
arm syscalls: svcall/sycall logic needs to get the ucontext argument from R4 instead of stack since all syscall parameters pass from registers in syscall.h
|
2018-08-24 07:11:18 -06:00 |
|
armv7-a
|
arch/arm/src/armv7-a: Replicate the same fix was previously commited for the armv7-r.
|
2018-09-20 21:40:29 -06:00 |
|
armv7-m
|
arch/arm/src/stm32h7: Remove old references to RXDMA. Add configuration option to select the Rx FIFO threshold level.
|
2018-09-02 08:35:22 -06:00 |
|
armv7-r
|
arch/arm/src/armv7-a: Replicate the same fix was previously commited for the armv7-r.
|
2018-09-20 21:40:29 -06:00 |
|
bcm2708
|
EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis.
|
2018-10-10 06:45:03 -06:00 |
|
c5471
|
Rename devif_loopback_out to devi_loopback
|
2018-08-25 08:33:21 -06:00 |
|
common
|
up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined
|
2018-08-24 14:50:45 -06:00 |
|
dm320
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
efm32
|
EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis.
|
2018-10-10 06:45:03 -06:00 |
|
imx1
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
imx6
|
Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115.
|
2018-08-05 10:48:02 -06:00 |
|
imxrt
|
/arch/arm/src/imxrt/imxrt_lpi2c.c: Fixes 2 bugs in the for IMXRT1050: (1) I2C time out and did not send STOP condition when sending single byte, (2) I2C could not receive bytes after repeated start.
|
2018-10-13 06:38:33 -06:00 |
|
kinetis
|
EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis.
|
2018-10-10 06:45:03 -06:00 |
|
kl
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
lc823450
|
Merged in masayuki2009/nuttx.nuttx/lc823450_mpu_for_flat (pull request #728)
|
2018-09-27 11:34:22 +00:00 |
|
lpc11xx
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
lpc17xx
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
lpc31xx
|
Replace non critical PANIC with DEBUGPANIC to save the code space
|
2018-08-24 06:21:15 -06:00 |
|
lpc43xx
|
arch/arm/src/lpc54/lpc54_sdmmc: Port Dave Marple's LPC43 USB DCD fix to the LPC54 with appropriate changed.
|
2018-10-21 17:55:51 -06:00 |
|
lpc54xx
|
arch/arm/src/lpc54/lpc54_sdmmc: Port Dave Marple's LPC43 USB DCD fix to the LPC54 with appropriate changed.
|
2018-10-21 17:55:51 -06:00 |
|
lpc214x
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
lpc2378
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
moxart
|
Squashed commit of the following:
|
2018-08-26 11:17:33 -06:00 |
|
nrf52
|
Merged in ebsong/nuttx (pull request #722)
|
2018-09-21 03:18:38 +00:00 |
|
nuc1xx
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
sam34
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
sama5
|
Remove a warning
|
2018-09-16 13:04:12 -06:00 |
|
samd2l2
|
configs/metro-m4: Fix RxD PAD selection. Add a configuration option to use OSCULP32K instead of XOSC32K.
|
2018-09-01 14:38:19 -06:00 |
|
samd5e5
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
samv7
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
stm32
|
arch/arm/src/stm32/stm32_pwm.c: Fix a compilation error introduced in recent PR. Found in build testing.
|
2018-10-19 16:21:50 -06:00 |
|
stm32f0
|
stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL
|
2018-10-10 06:29:29 -06:00 |
|
stm32f7
|
stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL
|
2018-10-10 06:29:29 -06:00 |
|
stm32h7
|
stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL
|
2018-10-10 06:29:29 -06:00 |
|
stm32l4
|
stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL
|
2018-10-10 06:29:29 -06:00 |
|
str71x
|
Replace non critical PANIC with DEBUGPANIC to save the code space
|
2018-08-24 06:21:15 -06:00 |
|
tiva
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
tms570
|
Replace all ASSERT with DEBUGASSERT to save the code space
|
2018-08-24 06:58:30 -06:00 |
|
xmc4
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
.gitignore
|
|
|
|
Makefile
|
Squashed commit of the following:
|
2018-06-20 12:30:37 -06:00 |
