4cefc5ce7a
When the architectural support for STM32G4 family was added, the
reference manual (RM0440) was at revision 2. Since then, it has
undergone several revisions. One significant change is in the
table of FLASH wait states: section 3.3.3 table 9. The outcome
of this change is that fewer FLASH wait states are needed for
most CPU clock (HCLK) frequencies. Notably, if running the CPU
clock at the maximum 170 MHz, only 4 FLASH wait states are
needed, rather than the previously programmed 8 wait states.
This gives a noticeable performance boost.
arch/arm/src/stm32/stm32g4xxxx_rcc.c:
* FLASH_ACR_LATENCY_SETTING: Reimplement compile-time logic
that selects the required wait state setting to use the new
updated table.
* Update all comments to indicate that RM0440 Rev 5 is used.
* Update section numbers mentioned in comments in cases where
they have changed due to added sections in the manual.
|
||
|---|---|---|
| .. | ||
| include | ||
| src | ||
| Kconfig | ||