262 lines
8.4 KiB
C
262 lines
8.4 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32wb/flipperzero/include/flipperzero-clocking.h
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STM32WB_FLIPPERZERO_INCLUDE_FLIPPERZERO_CLOCKING_H
|
|
#define __BOARDS_ARM_STM32WB_FLIPPERZERO_INCLUDE_FLIPPERZERO_CLOCKING_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* The Flipper Zero has 32MHz HSE crystal X1. The device can run off the HSI
|
|
* clock, or the MSI, or the HSE. Here we configure HSE to give us 64MHz
|
|
* system clock (maximum supported for STM32WB chips)
|
|
*/
|
|
|
|
/* HSI - 16 MHz RC factory-trimmed
|
|
* LSI - 32 KHz RC
|
|
* MSI - variable up to 48 MHz, synchronized to LSE
|
|
* HSE - 32 MHz installed
|
|
* LSE - 32.768 kHz installed
|
|
* HSI48 - 48 MHz fine-granularity trimmable RC with CRS
|
|
*/
|
|
|
|
#define STM32WB_HSI_FREQUENCY 16000000ul
|
|
#define STM32WB_LSI_FREQUENCY 32000
|
|
#define STM32WB_LSE_FREQUENCY 32768
|
|
#define STM32WB_HSE_FREQUENCY 32000000ul
|
|
|
|
/* XXX there needs to be independent selections for the System Clock Mux and
|
|
* the PLL Source Mux; currently System Clock Mux always is PLL, and PLL
|
|
* Source Mux is chosen by the following define. This is probably OK in many
|
|
* cases, but should be separated to support other power configurations.
|
|
*/
|
|
|
|
#if 0
|
|
# define HSI_CLOCK_CONFIG 1 /* HSI clock configuration */
|
|
#elif 1
|
|
# define HSE_CLOCK_CONFIG 1 /* HSE with 32MHz xtal */
|
|
#else
|
|
# define MSI_CLOCK_CONFIG 1 /* MSI @ 4MHz autotrimmed via LSE */
|
|
#endif
|
|
|
|
#if 0
|
|
# define STM32WB_BOARD_RFWKP_USEHSE 1 /* CPU2 use HSE/1024 on RF wakeup */
|
|
#elif 1
|
|
# define STM32WB_BOARD_RFWKP_USELSE 1 /* CPU2 use LSE on RF wakeup */
|
|
#endif
|
|
|
|
#if defined(HSI_CLOCK_CONFIG)
|
|
|
|
#define STM32WB_BOARD_USEHSI 1
|
|
|
|
#define STM32WB_SYSCLK_FREQUENCY 64000000ul
|
|
|
|
/* Prescaler common to all PLL inputs; will be 1 */
|
|
|
|
#define STM32WB_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
|
|
|
/* 'main' PLL config; we use this to generate our system clock via the R
|
|
* output. We set it up as (((16MHz / 1) * 8) / 2) = 64MHz
|
|
*/
|
|
|
|
#define STM32WB_PLLCFG_PLLN RCC_PLLCFG_PLLN(8)
|
|
#define STM32WB_PLLCFG_PLLR_ENABLED
|
|
#define STM32WB_PLLCFG_PLLR RCC_PLLCFG_PLLR(2)
|
|
|
|
/* 'SAIPLL1' is not used */
|
|
|
|
#define STM32WB_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(8)
|
|
|
|
/* CLK48 will come from HSI48 */
|
|
|
|
#define STM32WB_USE_CLK48 1
|
|
#define STM32WB_CLK48_SEL RCC_CCIPR_CLK48SEL_HSI48
|
|
#define STM32WB_HSI48_SYNCSRC SYNCSRC_LSE
|
|
|
|
/* Enable LSE oscillator, used automatically trim the HSI48, and for RTC */
|
|
|
|
#define STM32WB_USE_LSE 1
|
|
|
|
#elif defined(HSE_CLOCK_CONFIG)
|
|
|
|
/* Use the HSE */
|
|
|
|
#define STM32WB_BOARD_USEHSE 1
|
|
|
|
#define STM32WB_SYSCLK_FREQUENCY 64000000ul
|
|
|
|
/* Prescaler common to all PLL inputs; will be 2 */
|
|
|
|
#define STM32WB_PLLCFG_PLLM RCC_PLLCFG_PLLM(2)
|
|
|
|
/* 'main' PLL config; we use this to generate our system clock via the R
|
|
* output. We set it up as (((32MHz / 2) * 12) / 3) = 64MHz
|
|
* And the Q output is set as (((32MHz / 2) * 12) / 4) = 48MHz
|
|
*/
|
|
|
|
#define STM32WB_PLLCFG_PLLN RCC_PLLCFG_PLLN(12)
|
|
#define STM32WB_PLLCFG_PLLR_ENABLED
|
|
#define STM32WB_PLLCFG_PLLR RCC_PLLCFG_PLLR(3)
|
|
#define STM32WB_PLLCFG_PLLQ_ENABLED
|
|
#define STM32WB_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(4)
|
|
|
|
/* 'SAIPLL1' is not used */
|
|
|
|
#define STM32WB_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(8)
|
|
|
|
/* CLK48 will come from the PLLMAIN via the Q output */
|
|
|
|
#define STM32WB_USE_CLK48 1
|
|
#define STM32WB_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLMAIN
|
|
#define STM32WB_HSI48_SYNCSRC SYNCSRC_NONE
|
|
|
|
/* Enable LSE (for the RTC) */
|
|
|
|
#define STM32WB_USE_LSE 1
|
|
|
|
#elif defined(MSI_CLOCK_CONFIG)
|
|
|
|
/* Use the MSI */
|
|
|
|
#define STM32WB_BOARD_USEMSI 1
|
|
|
|
#define STM32WB_BOARD_MSIRANGE RCC_CR_MSIRANGE_4M
|
|
|
|
#define STM32WB_SYSCLK_FREQUENCY 64000000ul
|
|
|
|
/* Prescaler common to all PLL inputs; will be 1 */
|
|
|
|
#define STM32WB_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
|
|
|
/* 'main' PLL config; we use this to generate our system clock via the R
|
|
* output. We set it up as (((4MHz / 1) * 48) / 3) = 64MHz
|
|
* And the Q output is set as (((4MHz / 1) * 48) / 4) = 48MHz
|
|
*/
|
|
|
|
#define STM32WB_PLLCFG_PLLN RCC_PLLCFG_PLLN(48)
|
|
#define STM32WB_PLLCFG_PLLR_ENABLED
|
|
#define STM32WB_PLLCFG_PLLR RCC_PLLCFG_PLLR(3)
|
|
#define STM32WB_PLLCFG_PLLQ_ENABLED
|
|
#define STM32WB_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(4)
|
|
|
|
/* 'SAIPLL1' is not used */
|
|
|
|
#define STM32WB_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(8)
|
|
|
|
/* CLK48 will come from the PLLMAIN via the Q output */
|
|
|
|
#define STM32WB_USE_CLK48 1
|
|
#define STM32WB_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLMAIN
|
|
#define STM32WB_HSI48_SYNCSRC SYNCSRC_NONE
|
|
|
|
/* Enable the LSE oscillator, used automatically trim the MSI, and for RTC */
|
|
|
|
#define STM32WB_USE_LSE 1
|
|
|
|
#endif
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (64MHz) */
|
|
|
|
#define BOARD_AHB_FREQUENCY STM32WB_SYSCLK_FREQUENCY
|
|
|
|
#define STM32WB_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32WB_HCLK_FREQUENCY STM32WB_SYSCLK_FREQUENCY
|
|
|
|
/* CPU2 clock (HCLK2) is SYSCLK/2 (32MHz) */
|
|
|
|
#define STM32WB_RCC_EXTCFGR_C2HPRE RCC_EXTCFGR_C2HPRE_2
|
|
|
|
/* AHB4 clock (HCLK4) is SYSCLK (64MHz) */
|
|
|
|
#define STM32WB_RCC_EXTCFGR_SHDHPRE RCC_EXTCFGR_SHDHPRE_1
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/1 (64MHz) */
|
|
|
|
#define STM32WB_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK1
|
|
#define STM32WB_PCLK1_FREQUENCY (STM32WB_HCLK_FREQUENCY / 1)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK/1 (64MHz) */
|
|
|
|
#define STM32WB_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK1
|
|
#define STM32WB_PCLK2_FREQUENCY (STM32WB_HCLK_FREQUENCY / 1)
|
|
|
|
/* Timer Frequencies, if APB prescaler is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,16,17 are on APB2, TIM2 is on APB1
|
|
*/
|
|
|
|
/* Timers driven from APB1 will be the same frequency as PCLK1 */
|
|
|
|
#define STM32WB_APB1_TIM2_CLKIN (1 * STM32WB_PCLK1_FREQUENCY)
|
|
|
|
/* Timers driven from APB2 will be the same frequency as PCLK2 */
|
|
|
|
#define STM32WB_APB2_TIM1_CLKIN (1 * STM32WB_PCLK2_FREQUENCY)
|
|
#define STM32WB_APB2_TIM16_CLKIN (1 * STM32WB_PCLK2_FREQUENCY)
|
|
#define STM32WB_APB2_TIM17_CLKIN (1 * STM32WB_PCLK2_FREQUENCY)
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32WB_APB2_TIM1_CLKIN
|
|
#define BOARD_TIM2_FREQUENCY STM32WB_APB1_TIM2_CLKIN
|
|
#define BOARD_TIM16_FREQUENCY STM32WB_APB2_TIM16_CLKIN
|
|
#define BOARD_TIM17_FREQUENCY STM32WB_APB2_TIM17_CLKIN
|
|
|
|
/* Higher SYSCLK reguires more flash wait states. */
|
|
|
|
#define BOARD_FLASH_WAITSTATES 3
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Function Prototypes
|
|
****************************************************************************/
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __BOARDS_ARM_STM32WB_FLIPPERZERO_INCLUDE_FLIPPERZERO_CLOCKING_H */
|