nuttx

History

Gregory Nutt 4efb064169 Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask()		2014-10-09 06:09:03 -06:00
..
include	More trailing whilespace removal	2014-04-13 16:22:22 -06:00
nsh	Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask()	2014-10-09 06:09:03 -06:00
scripts	Massive clean-up of linker scripts from Freddie Chopin	2012-11-04 17:18:25 +00:00
src	All NSH-related files under nuttx/configs changed to use the corrected syslog interfaces	2014-10-08 14:28:55 -06:00
Kconfig	Add interrupt vector logic for the LM4F120	2013-03-01 21:41:29 +00:00
README.txt	lpc2378 port contributed by Rommel Marcelo	2010-04-09 00:51:08 +00:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.