205 lines
7.6 KiB
C
205 lines
7.6 KiB
C
/*******************************************************************************
|
|
* configs/stm32butterfly2/include/board.h
|
|
*
|
|
* Copyright (C) 2016 Michał Łyszczek. All rights reserved.
|
|
* Author: Michał Łyszczek <michal.lyszczek@gmail.com>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#ifndef __CONFIGS_STM32_BUTTERFLY2_INCLUDE_BOARD_H
|
|
#define __CONFIGS_STM32_BUTTERFLY2_INCLUDE_BOARD_H 1
|
|
|
|
/*******************************************************************************
|
|
* Included Files
|
|
******************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
#include "stm32_rcc.h"
|
|
|
|
/*******************************************************************************
|
|
* Pre-processor Definitions
|
|
******************************************************************************/
|
|
|
|
/* Clocking *******************************************************************/
|
|
|
|
/* HSI - 8 MHz RC factory-trimmed
|
|
* LSI - 40 KHz RC (30-60KHz, uncalibrated)
|
|
* HSE - On-board crystal frequency is 14.7456MHz
|
|
* LSE - LSE is not connected
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 14745600ul
|
|
|
|
#define STM32_HSI_FREQUENCY 8000000ul
|
|
#define STM32_LSI_FREQUENCY 40000u
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 0
|
|
|
|
/* PLL output is 71.8848MHz */
|
|
|
|
#define STM32_PLL_PREDIV2 RCC_CFGR2_PREDIV2d4
|
|
#define STM32_PLL_PLL2MUL RCC_CFGR2_PLL2MULx12
|
|
#define STM32_PLL_PREDIV1 RCC_CFGR2_PREDIV1d4
|
|
#define STM32_PLL_PLLMUL RCC_CFGR_PLLMUL_CLKx65
|
|
#define STM32_PLL_FREQUENCY 71884800ul
|
|
|
|
/* SYSCLK and HCLK adre the PLL frequency */
|
|
|
|
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY
|
|
|
|
/* USB clock output is 47.9232MHz */
|
|
|
|
#define STM32_CFGR_OTGFSPRE RCC_CFGR_OTGFSPREd3
|
|
|
|
/* APB2 clock (PCLK2) is HCLK */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
|
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define STM32_APB2_CLKIN STM32_PCLK2_FREQUENCY
|
|
|
|
#define STM32APB_TIM1_CLKIN STM32_PCLK2_FREQUENCY
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (35.9424MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* LED definitions ************************************************************/
|
|
/* There are four LEDs on stm32butterfly2 board that can be controlled by
|
|
* software. All pulled high and van be illuminated by driving the output low.
|
|
*
|
|
* LED1 PB0
|
|
* LED2 PB1
|
|
* LED3 PC4
|
|
* LED4 PC5
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0
|
|
#define BOARD_LED2 1
|
|
#define BOARD_LED3 2
|
|
#define BOARD_LED4 3
|
|
#define BOARD_NLEDS 4
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
#define BOARD_LED3_BIT (1 << BOARD_LED3)
|
|
#define BOARD_LED4_BIT (1 << BOARD_LED4)
|
|
|
|
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is defined.
|
|
* In thath case, the usage by the board port is defined in include/board.h and
|
|
* src/stm32_leds.c. The LEDs are used to encode OS-related events as follows:
|
|
*
|
|
* SYMBOL Val Meaning LED state
|
|
* LED1 LED2 LED3 LED4
|
|
* ----------------- --- ----------------------- ---- ---- ---- ---- */
|
|
#define LED_STARTED 0 /* NuttX has been started ON OFF OFF OFF */
|
|
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF ON OFF OFF */
|
|
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF OFF ON OFF */
|
|
#define LED_STACKCREATED 3 /* Idle stack created OFF OFF OFF ON */
|
|
#define LED_INIRQ 5 /* In an interrupt N/C N/C N/C GLOW */
|
|
#define LED_SIGNAL 6 /* In a signal handler N/C N/C N/C GLOW */
|
|
#define LED_ASSERTION 7 /* An assertion failed N/C N/C N/C GLOW */
|
|
#define LED_PANIC 8 /* The system has crashed N/C N/C N/C FLASH */
|
|
#undef LED_IDLE /* MCU is is sleep mode Not used */
|
|
|
|
/* After booting, LED1-3 are not longer used by the system and can be used for
|
|
* other purposes by the application (Of course, all LEDs are available to the
|
|
* application if CONFIG_ARCH_LEDS is not defined.
|
|
*/
|
|
|
|
/* ADC configuration. Right now only ADC12_IN10 is supported (potentiometer) */
|
|
|
|
#ifdef CONFIG_STM32_ADC2
|
|
# error "CONFIG_STM32_ADC2 is not supported"
|
|
#endif
|
|
|
|
/* SPI configuration. Only SPI1 is supported */
|
|
|
|
#ifdef CONFIG_STM32_SPI2
|
|
# error "CONFIG_STM32_SPI2 is not supported"
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* Public Data
|
|
******************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* Public Function Prototypes
|
|
******************************************************************************/
|
|
|
|
/*******************************************************************************
|
|
* Name: stm32_boardinitialize
|
|
*
|
|
* Description:
|
|
* All STM32 architectures must provide the following entry point. This
|
|
* entry point is called early in the initialization -- after all memory
|
|
* has been configured and mapped but before any devices have been
|
|
* initialized.
|
|
******************************************************************************/
|
|
|
|
void stm32_boardinitialize(void);
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_STM32_BUTTERFLY2_INCLUDE_BOARD_H */
|