35 lines
1013 B
Plaintext
35 lines
1013 B
Plaintext
Teensy LC README
|
|
================
|
|
|
|
This is the README file for NuttX on the PJRC Teensy LC. The Teensy LC
|
|
is a DIP style breakout board for the MKL25Z64 and comes with a USB
|
|
based bootloader. Contributed by Michael Hope.
|
|
|
|
Development Environment
|
|
=======================
|
|
|
|
All testing was done with the GNU ARM Embedded 4.9 toolchain on
|
|
Linux. See https://launchpad.net/gcc-arm-embedded to download.
|
|
|
|
Once you've configured and built NuttX, flash the resulting
|
|
nuttx.hex file to the board using the Teensy Loader Application.
|
|
|
|
LEDs
|
|
====
|
|
|
|
The Teensy LC has a single LED. If CONFIG_ARCH_LEDS is defined, then
|
|
NuttX will update the LED as the board boots. The summary is:
|
|
|
|
* LED off: board booting
|
|
* LED on: initial stack created
|
|
* LED flashing: panic.
|
|
|
|
See `include/board.h` for details.
|
|
|
|
Serial Console
|
|
==============
|
|
|
|
The serial console is mapped to UART0 and appears on pins 0 (RX) and
|
|
1 (TX). Consider using a 3.3 V USB to serial adapter such as the
|
|
Sparkfun #9717 FTDI cable.
|