nuttx/drivers/syslog/syslog_device.c
Nathan Hartman 1867bc2210 Fix compiler warnings (-Wunused-parameter) in various functions
Fixes the -Wunused-parameter warning in:
* group/group_signal.c: group_signal()
* irq/irq_unexpectedisr.c: irq_unexpected_isr()
* task/task_spawn.c: nxtask_spawn_proxy()
* timer/timer_getoverrun.c: timer_getoverrun()
* misc/dev_null.c: devnull_read(), devnull_write(), devnull_poll()
* misc/dev_zero.c: devzero_read(), devzero_write(), devzero_poll()
* syslog/syslog_channel.c: syslog_default_write()
* syslog/syslog_device.c: syslog_dev_flush()
* grp/lib_initgroups.c: initgroups()
* misc/lib_mknod.c: mknod()
* misc/lib_glob.c: ignore_err()
* pthread/pthread_barrierinit.c: pthread_barrier_init()
* pthread/pthread_atfork.c: pthread_atfork()
* semaphore/sem_init.c: nxsem_init()
* stream/lib_nullinstream.c: nullinstream_getc()
* stream/lib_nulloutstream.c: nulloutstream_putc()
* stream/lib_libnoflush.c: lib_noflush()
* stream/lib_libsnoflush.c: lib_snoflush()
* string/lib_strerror.c: strerror()
* time/lib_gettimeofday.c: gettimeofday()
* time/lib_settimeofday.c: settimeofday()
* unistd/lib_pathconf.c: fpathconf(), pathconf()
* unistd/lib_getrusage.c: getrusage()
* unistd/lib_setrlimit.c: setrlimit()
* unistd/lib_getrlimit.c: getrlimit()
* unistd/lib_setpriority.c: setpriority()
2022-07-12 11:42:34 +08:00

791 lines
24 KiB
C

/****************************************************************************
* drivers/syslog/syslog_device.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <sched.h>
#include <fcntl.h>
#include <errno.h>
#include <assert.h>
#include <nuttx/arch.h>
#include <nuttx/kmalloc.h>
#include <nuttx/fs/fs.h>
#include <nuttx/mutex.h>
#include <nuttx/syslog/syslog.h>
#include <nuttx/compiler.h>
#include "syslog.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Open the device/file write-only, try to create (file) it if it doesn't
* exist, if the file that already exists, then append the new log data to
* end of the file.
*/
#define SYSLOG_OFLAGS (O_WRONLY | O_CREAT | O_APPEND)
/****************************************************************************
* Private Types
****************************************************************************/
/* This enumeration represents the state of the SYSLOG device interface */
enum syslog_dev_state
{
SYSLOG_UNINITIALIZED = 0, /* SYSLOG has not been initialized */
SYSLOG_INITIALIZING, /* SYSLOG is being initialized */
SYSLOG_REOPEN, /* SYSLOG open failed... try again later */
SYSLOG_FAILURE, /* SYSLOG open failed... close and try again */
SYSLOG_OPENED, /* SYSLOG device is open and ready to use */
};
/* This structure contains all SYSLOGing state information */
struct syslog_dev_s
{
struct syslog_channel_s channel;
uint8_t sl_state; /* See enum syslog_dev_state */
uint8_t sl_oflags; /* Saved open mode (for re-open) */
uint16_t sl_mode; /* Saved open flags (for re-open) */
rmutex_t sl_lock; /* Enforces mutually exclusive access */
struct file sl_file; /* The syslog file structure */
FAR char *sl_devpath; /* Full path to the character device */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static ssize_t syslog_dev_write(FAR struct syslog_channel_s *channel,
FAR const char *buffer, size_t buflen);
static int syslog_dev_putc(FAR struct syslog_channel_s *channel, int ch);
static int syslog_dev_force(FAR struct syslog_channel_s *channel, int ch);
static int syslog_dev_flush(FAR struct syslog_channel_s *channel);
/****************************************************************************
* Private Data
****************************************************************************/
/* This structure contains all SYSLOG device operations */
static const struct syslog_channel_ops_s g_syslog_dev_ops =
{
syslog_dev_putc,
syslog_dev_force,
syslog_dev_flush,
syslog_dev_write,
syslog_dev_uninitialize
};
static const uint8_t g_syscrlf[2] =
{
'\r', '\n'
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: syslog_dev_takesem
****************************************************************************/
static inline int syslog_dev_takesem(FAR struct syslog_dev_s *syslog_dev)
{
/* Does this thread already hold the lock? That could happen if
* we were called recursively, i.e., if the logic kicked off by
* file_write() where to generate more debug output. Return an
* error in that case.
*/
if (nxrmutex_is_hold(&syslog_dev->sl_lock))
{
/* Return an error (instead of deadlocking) */
return -EWOULDBLOCK;
}
/* Either the lock is available or is currently held by another
* thread. Wait for it to become available.
*/
return nxrmutex_lock(&syslog_dev->sl_lock);
}
/****************************************************************************
* Name: syslog_dev_givesem
****************************************************************************/
static inline void syslog_dev_givesem(FAR struct syslog_dev_s *syslog_dev)
{
nxrmutex_unlock(&syslog_dev->sl_lock);
}
/****************************************************************************
* Name: syslog_dev_open
*
* Description:
* Opens the SYSLOG character device (or file).
*
* Input Parameters:
* syslog_dev - Handle to syslog device to be used.
* devpath - The full path to the character device to be used.
* oflags - File open flags.
* mode - File open mode (only if oflags include O_CREAT).
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure.
*
****************************************************************************/
static int syslog_dev_open(FAR struct syslog_dev_s *syslog_dev,
FAR const char *devpath, int oflags, int mode)
{
int ret;
/* At this point, the only expected states are SYSLOG_UNINITIALIZED or
* SYSLOG_REOPEN. Not SYSLOG_INITIALIZING, SYSLOG_FAILURE, SYSLOG_OPENED.
*/
DEBUGASSERT(syslog_dev->sl_state == SYSLOG_UNINITIALIZED ||
syslog_dev->sl_state == SYSLOG_REOPEN);
/* Save the path to the device in case we have to re-open it.
* If we get here and sl_devpath is not equal to NULL, that is a clue
* that we are re-opening the file.
*/
if (syslog_dev->sl_state == SYSLOG_REOPEN)
{
/* Re-opening: Then we should already have a copy of the path to the
* device. But that may be for a different device if we revert back
* to old syslog destination after the previous attempt failed.
*/
DEBUGASSERT(syslog_dev->sl_devpath != NULL);
}
else
{
/* Initializing. We do not have the device path yet. */
DEBUGASSERT(syslog_dev->sl_devpath == NULL);
}
/* Copy the device path so that we can use it if we
* have to re-open the file.
*/
syslog_dev->sl_oflags = oflags;
syslog_dev->sl_mode = mode;
if (syslog_dev->sl_devpath != devpath)
{
if (syslog_dev->sl_devpath != NULL)
{
kmm_free(syslog_dev->sl_devpath);
}
syslog_dev->sl_devpath = strdup(devpath);
}
DEBUGASSERT(syslog_dev->sl_devpath != NULL);
syslog_dev->sl_state = SYSLOG_INITIALIZING;
/* Open the device driver. */
ret = file_open(&syslog_dev->sl_file, devpath, oflags, mode);
if (ret < 0)
{
/* We failed to open the file. Perhaps it does exist? Perhaps it
* exists, but is not ready because it depends on insertion of a
* removable device?
*
* In any case we will attempt to re-open the device repeatedly.
* The assumption is that the device path is valid but that the
* driver has not yet been registered or a removable device has
* not yet been installed.
*/
syslog_dev->sl_state = SYSLOG_REOPEN;
return ret;
}
/* The SYSLOG device is open and ready for writing. */
nxrmutex_init(&syslog_dev->sl_lock);
syslog_dev->sl_state = SYSLOG_OPENED;
return OK;
}
/****************************************************************************
* Name: syslog_dev_outputready
*
* Description:
* Ignore any output:
*
* (1) Before the SYSLOG device has been initialized. This could happen
* from debug output that occurs early in the boot sequence before
* syslog_dev_initialize() is called (SYSLOG_UNINITIALIZED).
* (2) While the device is being initialized. The case could happen if
* debug output is generated while syslog_dev_initialize() executes
* (SYSLOG_INITIALIZING).
* (3) While we are generating SYSLOG output. The case could happen if
* debug output is generated while syslog_dev_putc() executes
* (This case is actually handled inside of syslog_semtake()).
* (4) Any debug output generated from interrupt handlers. A disadvantage
* of using the generic character device for the SYSLOG is that it
* cannot handle debug output generated from interrupt level handlers.
* (5) Any debug output generated from the IDLE loop. The character
* driver interface is blocking and the IDLE thread is not permitted
* to block.
* (6) If any failure occurred during output. In this case, we properly
* close the device, and set it for later re-opening.
*
* NOTE: That the third case is different. It applies only to the thread
* that currently holds the sl_lock. Other threads should wait.
* that is why that case is handled in syslog_semtake().
*
* Input Parameters:
* syslog_dev - Handle to syslog device to be used.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure.
*
****************************************************************************/
static int syslog_dev_outputready(FAR struct syslog_dev_s *syslog_dev)
{
int ret;
/* Cases (4) and (5) */
if (up_interrupt_context() || sched_idletask())
{
return -ENOSYS;
}
/* We can save checks in the usual case: That after the SYSLOG device
* has been successfully opened.
*/
if (syslog_dev->sl_state != SYSLOG_OPENED)
{
/* Case (1) and (2) */
if (syslog_dev->sl_state == SYSLOG_UNINITIALIZED ||
syslog_dev->sl_state == SYSLOG_INITIALIZING)
{
return -EAGAIN; /* Can't access the SYSLOG now... maybe next time? */
}
/* NOTE that the scheduler is locked. That is because we do not have
* fully initialized semaphore capability until the SYSLOG device is
* successfully initialized.
*/
sched_lock();
/* Case (6) */
if (syslog_dev->sl_state == SYSLOG_FAILURE)
{
file_close(&syslog_dev->sl_file);
nxrmutex_destroy(&syslog_dev->sl_lock);
syslog_dev->sl_state = SYSLOG_REOPEN;
}
/* syslog_dev_initialize() is called as soon as enough of the operating
* system is in place to support the open operation... but it is
* possible that the SYSLOG device is not yet registered at that time.
* In this case, we know that the system is sufficiently initialized
* to support an attempt to re-open the SYSLOG device.
*/
if (syslog_dev->sl_state == SYSLOG_REOPEN)
{
/* Try again to initialize the device. We may do this repeatedly
* because the log device might be something that was not ready
* the first time that syslog_dev_initialize() was called (such as
* a USB serial device that has not yet been connected or a file in
* an NFS mounted file system that has not yet been mounted).
*/
DEBUGASSERT(syslog_dev->sl_devpath != NULL);
ret = syslog_dev_open(syslog_dev, syslog_dev->sl_devpath,
(int)syslog_dev->sl_oflags,
(int)syslog_dev->sl_mode);
if (ret < 0)
{
sched_unlock();
return ret;
}
}
sched_unlock();
DEBUGASSERT(syslog_dev->sl_state == SYSLOG_OPENED);
}
return OK;
}
/****************************************************************************
* Name: syslog_dev_write
*
* Description:
* This is the low-level, multiple byte, system logging interface provided
* for the character driver interface.
*
* Input Parameters:
* channel - Handle to syslog channel to be used.
* buffer - The buffer containing the data to be output.
* buflen - The number of bytes in the buffer.
*
* Returned Value:
* On success, the character is echoed back to the caller. A negated errno
* value is returned on any failure.
*
****************************************************************************/
static ssize_t syslog_dev_write(FAR struct syslog_channel_s *channel,
FAR const char *buffer, size_t buflen)
{
FAR struct syslog_dev_s *syslog_dev = (FAR struct syslog_dev_s *)channel;
FAR const char *endptr;
ssize_t nwritten;
size_t writelen;
size_t remaining;
int ret;
/* Check if the system is ready to do output operations */
ret = syslog_dev_outputready(syslog_dev);
if (ret < 0)
{
return ret;
}
/* The syslog device is ready for writing */
ret = syslog_dev_takesem(syslog_dev);
if (ret < 0)
{
/* We probably already hold the semaphore and were probably
* re-entered by the logic kicked off by file_write().
* We might also have been interrupted by a signal. Either
* way, we are outta here.
*/
return ret;
}
/* Loop until we have output all characters */
for (endptr = buffer, remaining = buflen;
remaining > 0;
endptr++, remaining--)
{
/* Check for carriage return or line feed */
if (*endptr == '\r' || *endptr == '\n')
{
/* Write everything up to the position of the special
* character.
*
* - buffer points to next byte to output.
* - endptr points to the special character.
*/
writelen = (size_t)((uintptr_t)endptr - (uintptr_t)buffer);
if (writelen > 0)
{
nwritten = file_write(&syslog_dev->sl_file,
buffer, writelen);
if (nwritten < 0)
{
ret = (int)nwritten;
goto errout_with_sem;
}
}
/* Check for pre-formatted CR-LF sequence */
if (remaining > 1 &&
((endptr[0] == '\r' && endptr[1] == '\n') ||
(endptr[0] == '\n' && endptr[1] == '\r')))
{
writelen = sizeof(g_syscrlf);
/* Skip over pre-formatted CR-LF or LF-CR sequence */
endptr++;
remaining--;
}
else
{
/* Ignore the carriage return, but for the linefeed, output
* both a carriage return and a linefeed.
*/
writelen = *endptr == '\n' ? sizeof(g_syscrlf) : 0;
}
if (writelen > 0)
{
nwritten = file_write(&syslog_dev->sl_file,
g_syscrlf, writelen);
/* Synchronize the file when each CR-LF is encountered
* (i.e., implements line buffering always).
*/
if (nwritten > 0)
{
syslog_dev_flush(channel);
}
if (nwritten < 0)
{
ret = (int)nwritten;
goto errout_with_sem;
}
}
/* Adjust pointers */
buffer = endptr + 1;
}
}
/* Write any unterminated data at the end of the buffer.
*
* - buffer points to next byte to output.
* - endptr points to the end of the buffer plus 1.
*/
writelen = (size_t)((uintptr_t)endptr - (uintptr_t)buffer);
if (writelen > 0)
{
nwritten = file_write(&syslog_dev->sl_file, buffer, writelen);
if (nwritten < 0)
{
ret = (int)nwritten;
goto errout_with_sem;
}
}
syslog_dev_givesem(syslog_dev);
return buflen;
errout_with_sem:
syslog_dev->sl_state = SYSLOG_FAILURE;
syslog_dev_givesem(syslog_dev);
return ret;
}
/****************************************************************************
* Name: syslog_dev_putc
*
* Description:
* This is the low-level, single character, system logging interface
* provided for the character driver interface.
*
* Input Parameters:
* channel - Handle to syslog channel to be used.
* ch - The character to add to the SYSLOG (must be positive).
*
* Returned Value:
* On success, the character is echoed back to the caller. A negated errno
* value is returned on any failure.
*
****************************************************************************/
static int syslog_dev_putc(FAR struct syslog_channel_s *channel, int ch)
{
FAR struct syslog_dev_s *syslog_dev = (FAR struct syslog_dev_s *)channel;
ssize_t nbytes;
uint8_t uch;
int ret;
/* Check if the system is ready to do output operations */
ret = syslog_dev_outputready(syslog_dev);
if (ret < 0)
{
return ret;
}
/* Ignore carriage returns */
if (ch == '\r')
{
return ch;
}
/* The syslog device is ready for writing and we have something of
* value to write.
*/
ret = syslog_dev_takesem(syslog_dev);
if (ret < 0)
{
/* We probably already hold the semaphore and were probably
* re-entered by the logic kicked off by file_write().
* We might also have been interrupted by a signal. Either
* way, we are outta here.
*/
return ret;
}
/* Pre-pend a newline with a carriage return. */
if (ch == '\n')
{
/* Write the CR-LF sequence */
nbytes = file_write(&syslog_dev->sl_file, g_syscrlf, 2);
/* Synchronize the file when each CR-LF is encountered (i.e.,
* implements line buffering always).
*/
if (nbytes > 0)
{
syslog_dev_flush(channel);
}
}
else
{
/* Write the non-newline character (and don't flush) */
uch = (uint8_t)ch;
nbytes = file_write(&syslog_dev->sl_file, &uch, 1);
}
syslog_dev_givesem(syslog_dev);
/* Check if the write was successful. If not, nbytes will be
* a negated errno value.
*/
if (nbytes < 0)
{
syslog_dev->sl_state = SYSLOG_FAILURE;
return (int)nbytes;
}
return ch;
}
/****************************************************************************
* Name: syslog_dev_force
*
* Description:
* Dummy, do nothing force write operation.
*
* Input Parameters:
* channel - Handle to syslog channel to be used.
*
* Returned Value:
* On success, the character is echoed back to the caller. A negated
* errno value is returned on any failure.
*
****************************************************************************/
static int syslog_dev_force(FAR struct syslog_channel_s *channel, int ch)
{
UNUSED(channel);
return ch;
}
/****************************************************************************
* Name: syslog_dev_flush
*
* Description:
* Flush any buffer data in the file system to media.
*
* Input Parameters:
* channel - Handle to syslog channel to be used.
*
* Returned Value:
* Zero (OK) on success; a negated errno value is returned on any failure.
*
****************************************************************************/
static int syslog_dev_flush(FAR struct syslog_channel_s *channel)
{
#if defined(CONFIG_SYSLOG_FILE) && !defined(CONFIG_DISABLE_MOUNTPOINT)
FAR struct syslog_dev_s *syslog_dev = (FAR struct syslog_dev_s *)channel;
/* Ignore return value, always return success. file_fsync() could fail
* because the file is not open, the inode is not a mountpoint, or the
* mountpoint does not support the sync() method.
*/
file_fsync(&syslog_dev->sl_file);
#else
UNUSED(channel);
#endif
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: syslog_dev_initialize
*
* Description:
* Initialize to use the character device (or file) at
* CONFIG_SYSLOG_DEVPATH as the SYSLOG sink.
*
* On power up, the SYSLOG facility is non-existent or limited to very
* low-level output. This function may be called later in the
* initialization sequence after full driver support has been initialized.
* (via syslog_initialize()) It installs the configured SYSLOG drivers
* and enables full SYSLOGing capability.
*
* NOTE that this implementation excludes using a network connection as
* SYSLOG device. That would be a good extension.
*
* Input Parameters:
* devpath - The full path to the character device to be used.
* oflags - File open flags.
* mode - File open mode (only if oflags include O_CREAT).
*
* Returned Value:
* Returns a newly created SYSLOG channel, or NULL in case of any failure.
*
****************************************************************************/
FAR struct syslog_channel_s *syslog_dev_initialize(FAR const char *devpath,
int oflags, int mode)
{
FAR struct syslog_dev_s * syslog_dev;
syslog_dev = kmm_zalloc(sizeof(struct syslog_dev_s));
if (syslog_dev == NULL)
{
return NULL;
}
syslog_dev_open(syslog_dev, devpath, oflags, mode);
syslog_dev->channel.sc_ops = &g_syslog_dev_ops;
return (FAR struct syslog_channel_s *)syslog_dev;
}
/****************************************************************************
* Name: syslog_dev_uninitialize
*
* Description:
* Disable the last device/file channel in preparation to use a different
* SYSLOG device. Currently only used for CONFIG_SYSLOG_FILE.
*
* Input Parameters:
* channel - Handle to syslog channel to be used.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure.
*
* Assumptions:
* The caller has already switched the SYSLOG source to some safe channel
* (the default channel).
*
****************************************************************************/
void syslog_dev_uninitialize(FAR struct syslog_channel_s *channel)
{
FAR struct syslog_dev_s *syslog_dev = (FAR struct syslog_dev_s *)channel;
/* Uninitializing a SYSLOG device should not take place within
* interrupt context.
*/
if (up_interrupt_context() || sched_idletask())
{
DEBUGASSERT(!up_interrupt_context() && !sched_idletask());
return;
}
/* The device cannot be uninitialized while it is being
* initialized simultaneously.
*/
DEBUGASSERT(syslog_dev->sl_state != SYSLOG_UNINITIALIZED &&
syslog_dev->sl_state != SYSLOG_INITIALIZING);
/* Attempt to flush any buffered data. */
sched_lock();
syslog_dev_flush(channel);
/* Close the detached file instance, and destroy the semaphore. These are
* both only created when the device is in SYSLOG_OPENED or SYSLOG_FAILURE
* state.
*/
if (syslog_dev->sl_state == SYSLOG_OPENED ||
syslog_dev->sl_state == SYSLOG_FAILURE)
{
file_close(&syslog_dev->sl_file);
nxrmutex_destroy(&syslog_dev->sl_lock);
}
/* Set the device in UNINITIALIZED state. */
syslog_dev->sl_state = SYSLOG_UNINITIALIZED;
/* Free the device path */
if (syslog_dev->sl_devpath != NULL)
{
kmm_free(syslog_dev->sl_devpath);
}
/* Free the channel structure */
kmm_free(syslog_dev);
sched_unlock();
}