| .. |
|
chip
|
STM32: Add conditional logic for STM32F37xx
|
2016-08-13 06:43:13 -06:00 |
|
gnu
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
|
iar
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
|
chip.h
|
Add stm32f105r support
|
2016-06-06 12:52:41 -07:00 |
|
Kconfig
|
I'm using NuttX on STM32F373 and saw the config was missing SPI2 and
|
2016-08-08 12:25:15 -06:00 |
|
Make.defs
|
STM32: Add oneshot lower half to build system. Fix some build problems.
|
2016-08-11 14:53:39 -06:00 |
|
stm32_1wire.c
|
Move include/nuttx/1wire.h to include/nuttx/drivers/1wire.h
|
2016-07-21 13:51:28 -06:00 |
|
stm32_1wire.h
|
Costmetic changes from review of last PR
|
2016-05-25 18:04:39 -06:00 |
|
stm32_adc.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_adc.h
|
STM32 ADC: Add DMA support for STM32F30xxx
|
2015-12-22 03:42:37 -05:00 |
|
stm32_aes.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
stm32_aes.h
|
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
|
2015-02-04 06:49:05 -06:00 |
|
stm32_alarm.h
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
|
stm32_allocateheap.c
|
Rename CONFIG_DEBUG_HEAP to CONFIG_HEAP_COLORATION
|
2016-06-15 14:48:06 -06:00 |
|
stm32_bbsram.c
|
With last change, stm32_pwr_enablebkp() no longer returns a value
|
2016-08-09 07:50:31 -06:00 |
|
stm32_bbsram.h
|
Mostly costmetic changes from review of last PR
|
2016-06-29 07:33:30 -06:00 |
|
stm32_bkp.h
|
|
|
|
stm32_can.c
|
can.h moved from include/nuttx/ to include/nuttx/drivers.
|
2016-07-20 13:38:36 -06:00 |
|
stm32_can.h
|
can.h moved from include/nuttx/ to include/nuttx/drivers.
|
2016-07-20 13:38:36 -06:00 |
|
stm32_capture.c
|
Correct conditional compilation in STM32 timer cpature logic
|
2016-06-03 08:41:53 -06:00 |
|
stm32_capture.h
|
A few more cosmetic changes
|
2015-12-24 07:38:17 -06:00 |
|
stm32_ccm.c
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
|
stm32_ccm.h
|
Clean up some naming
|
2015-12-01 15:04:12 -06:00 |
|
stm32_dac.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32_dac.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_dbgmcu.h
|
|
|
|
stm32_dma2d.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32_dma2d.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
|
stm32_dma.c
|
Fix STM32 DMA code and configuration for STM32F37X chips
|
2016-06-09 05:02:43 +02:00 |
|
stm32_dma.h
|
Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled
|
2016-06-12 14:44:04 -06:00 |
|
stm32_dumpgpio.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_eth.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_eth.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_exti_alarm.c
|
Simplify some computations
|
2016-07-23 08:13:25 -06:00 |
|
stm32_exti_gpio.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
|
stm32_exti_pwr.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
|
stm32_exti_pwr.h
|
STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.
|
2015-04-28 06:37:59 -06:00 |
|
stm32_exti.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_flash.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32_flash.h
|
|
|
|
stm32_freerun.c
|
Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.
|
2016-07-11 06:54:02 -06:00 |
|
stm32_freerun.h
|
Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.
|
2016-07-11 06:54:02 -06:00 |
|
stm32_fsmc.h
|
Fix typo
|
2015-09-10 21:07:03 -04:00 |
|
stm32_getc.c
|
Update some comments
|
2016-06-04 13:04:13 -06:00 |
|
stm32_getc.h
|
KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc
|
2016-06-04 11:29:27 -06:00 |
|
stm32_gpio.c
|
hen configuring a GPIO via stm32_configgpio() the function will first set the mode to output and then set the initial state of the gpio later on. If you have an application with an externaly pulled-up pin, this would lead to a glitch on the line that may be dangerous in some applications (e.G. Reset Line for other chips, etc). This changes sets the output state before configuring the pin as an output.
|
2016-06-17 06:23:18 -06:00 |
|
stm32_gpio.h
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
|
stm32_i2c_alt.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32_i2c.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32_i2c.h
|
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
|
2016-02-02 12:08:23 -06:00 |
|
stm32_idle.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_irq.c
|
Simplify some computations
|
2016-07-23 08:13:25 -06:00 |
|
stm32_iwdg.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_lowputc.c
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
|
stm32_lowputc.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_lse.c
|
Make stm32_pwr_enablebkp thread safe
|
2016-08-09 07:36:13 -06:00 |
|
stm32_lsi.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
|
stm32_ltdc.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32_ltdc.h
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
|
stm32_mpuinit.c
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
|
stm32_mpuinit.h
|
|
|
|
stm32_oneshot_lowerhalf.c
|
Add a simulated oneshot lowerhalf driver
|
2016-08-12 13:14:03 -06:00 |
|
stm32_oneshot.c
|
STM32: Fix bug in oneshot timer
|
2016-07-13 10:20:38 -06:00 |
|
stm32_oneshot.h
|
STM32: Add support for Tickless mode (two timer implementation)
|
2016-07-06 12:48:30 -06:00 |
|
stm32_otgfs.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
|
stm32_otgfsdev.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_otgfshost.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_otghs.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
|
stm32_otghsdev.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_otghshost.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_pm.h
|
Cosmetic: Move # of pre-processior command to column 1
|
2015-09-05 09:07:37 -06:00 |
|
stm32_pminitialize.c
|
|
|
|
stm32_pmsleep.c
|
|
|
|
stm32_pmstandby.c
|
|
|
|
stm32_pmstop.c
|
|
|
|
stm32_procfs_ccm.c
|
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
|
2016-06-11 15:50:49 -06:00 |
|
stm32_pwm.c
|
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
|
2016-07-20 13:48:24 -06:00 |
|
stm32_pwm.h
|
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
|
2016-07-20 13:48:24 -06:00 |
|
stm32_pwr.c
|
Correct some comments
|
2016-08-09 15:15:21 -06:00 |
|
stm32_pwr.h
|
Correct some comments
|
2016-08-09 15:15:21 -06:00 |
|
stm32_qencoder.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32_qencoder.h
|
|
|
|
stm32_rcc.c
|
With last change, stm32_pwr_enablebkp() no longer returns a value
|
2016-08-09 07:50:31 -06:00 |
|
stm32_rcc.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
|
stm32_rng.c
|
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
|
2016-07-20 13:15:37 -06:00 |
|
stm32_rtc_lowerhalf.c
|
alarm 10 now runs to completion
|
2016-05-31 14:17:52 -07:00 |
|
stm32_rtc.c
|
Eliminate a warning
|
2016-06-16 15:26:19 -06:00 |
|
stm32_rtc.h
|
STM32: Move backup domain reset to stm32_rcc.c in order to avoid disabling LSE during RTC initialiation.
|
2016-06-16 09:52:15 -06:00 |
|
stm32_rtcc.c
|
A consequence of Max's change to the logic to enable access to the backup domain is that every call to enabledbkp(true) must be followed by a matching call to enablebkp(false). There was one cse in both RTCC drivers where that may not always be true.
|
2016-08-09 11:33:47 -06:00 |
|
stm32_rtcounter.c
|
With last change, stm32_pwr_enablebkp() no longer returns a value
|
2016-08-09 07:50:31 -06:00 |
|
stm32_sdio.c
|
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
|
2016-06-20 12:44:38 -06:00 |
|
stm32_sdio.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_serial.c
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
|
stm32_spi.c
|
Add and fix some SPI debug output
|
2016-08-13 08:31:37 -06:00 |
|
stm32_spi.h
|
For STM32, rename up_spiinitialize to stm32_spibus_initialize
|
2016-01-26 12:22:27 -06:00 |
|
stm32_start.c
|
I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.
|
2016-07-14 07:29:39 -06:00 |
|
stm32_syscfg.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
|
stm32_tickless.c
|
Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.
|
2016-07-11 06:54:02 -06:00 |
|
stm32_tim_lowerhalf.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
stm32_tim.c
|
STM32 timer: Eliminate a warning
|
2016-07-11 13:13:17 -06:00 |
|
stm32_tim.h
|
STM32 timer: Reorganize to conform better with the NuttX coding style
|
2016-07-06 13:36:17 -06:00 |
|
stm32_timerisr.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32_uart.h
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
|
stm32_uid.c
|
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
|
2015-11-18 14:33:27 -06:00 |
|
stm32_uid.h
|
Changes to last merge from review for compliance to coding standards
|
2015-11-17 21:10:17 -06:00 |
|
stm32_usbdev.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32_usbdev.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_usbhost.c
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:42:29 -06:00 |
|
stm32_usbhost.h
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
|
stm32_userspace.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32_userspace.h
|
|
|
|
stm32_waste.c
|
|
|
|
stm32_waste.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_wdg.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
stm32_wwdg.c
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
stm32.h
|
Centralize definitions associated with CONFIG_DEBUG_CAN
|
2016-06-15 15:45:27 -06:00 |
|
stm32f10xxx_dma.c
|
Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled
|
2016-06-12 14:44:04 -06:00 |
|
stm32f10xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32f20xxx_dma.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32f20xxx_rcc.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
stm32f30xxx_i2c.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32f30xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32f37xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
|
stm32f40xxx_alarm.h
|
RTC lower half was missing call to F4 alarm cancel function
|
2016-04-04 08:23:09 -06:00 |
|
stm32f40xxx_dma.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
stm32f40xxx_rcc.c
|
I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization.
|
2016-07-14 07:29:39 -06:00 |
|
stm32f40xxx_rtcc.c
|
A consequence of Max's change to the logic to enable access to the backup domain is that every call to enabledbkp(true) must be followed by a matching call to enablebkp(false). There was one cse in both RTCC drivers where that may not always be true.
|
2016-08-09 11:33:47 -06:00 |
|
stm32l15xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
