33 lines
1.3 KiB
ReStructuredText
33 lines
1.3 KiB
ReStructuredText
==============
|
|
ws2812 Drivers
|
|
==============
|
|
|
|
This driver allows control of any smart pixels that use the ws2812
|
|
protocol. It supports pixel chains that use normal RGB pixels or
|
|
newer RGBW pixels.
|
|
|
|
The current driver does not support mixed RGB and RGBW pixels in a
|
|
single chain.
|
|
|
|
The NuttX ws2812 driver is split into two parts:
|
|
|
|
#. An "upper half", generic driver that provides the common
|
|
interface to application level code, and
|
|
#. A "lower half", platform-specific driver that implements the
|
|
low-level formatting and output.
|
|
|
|
Files supporting ws2812 can be found in the following locations:
|
|
|
|
- **Interface Definition**. The header file for the NuttX ws2812
|
|
driver reside at ``include/nuttx/leds/ws2812.h``. This header
|
|
file includes both the application level interface to the ws2812
|
|
driver as well as the interface between the "upper half" and
|
|
"lower half" drivers. The ws2812 module uses a standard character
|
|
driver framework.
|
|
- **"Upper Half" Driver**. The generic, "upper half" ws2812 driver
|
|
resides at ``drivers/leds/ws2812.c``.
|
|
- **"Lower Half" Drivers**. Platform-specific ws2812 drivers reside
|
|
in ``arch/``\ *<architecture>*\ ``/src/``\ *<hardware>*
|
|
directory for the specific processor *<architecture>* and for
|
|
the specific *<chip>* ws2812 peripheral devices.
|