nuttx/drivers
rongyichang 52d516ab46 drivers/lcd: change lcd stride from pixel to bytes
In order to achieve better scalability, change the stride
from pixel mode to byte mode.For example, in the case of RGB888
mode with 466 pixels in width and a 4-byte aligned buffer,it is
only necessary to extend the buffer of one line from 1398 bytes
to 1400 bytes, instead of extending it to 1404 bytes.

Signed-off-by: rongyichang <rongyichang@xiaomi.com>
2023-11-14 07:30:29 -08:00
..
1wire 1wrie:fix typo 2023-08-03 00:06:24 -07:00
analog drivers/ioexpander: Add const to the value array of multiwritepin 2023-09-28 10:09:51 +08:00
audio kernel: replace all usleep to nxsig_usleep in kernel space 2023-10-25 15:46:03 +08:00
bch enable O_CLOEXEC explicit 2023-09-22 13:51:00 +08:00
can Add new ioctls 2023-10-27 13:52:28 -03:00
clk Kconfigs: rename {Rpmsg|rpmsg} to RPMGS 2023-10-28 13:58:56 +08:00
contactless mm/alloc: remove all unnecessary cast for alloc 2023-08-30 14:34:20 +08:00
crypto kernel: replace all usleep to nxsig_usleep in kernel space 2023-10-25 15:46:03 +08:00
devicetree fdt: Add initial FDT support and procfs for userspace export 2023-08-05 12:41:06 -07:00
dma
dummy
eeprom Documentation: remove all migrated READMEs 2023-10-29 21:03:54 -03:00
efuse nuttx: use lib_free for memory de-allocation after strdup or asprintf 2023-08-08 11:58:29 -03:00
i2c mm/alloc: remove all unnecessary cast for alloc 2023-08-30 14:34:20 +08:00
i2s mm/alloc: remove all unnecessary cast for alloc 2023-08-30 14:34:20 +08:00
input Kconfigs: rename {Rpmsg|rpmsg} to RPMGS 2023-10-28 13:58:56 +08:00
ioexpander Kconfigs: rename {Rpmsg|rpmsg} to RPMGS 2023-10-28 13:58:56 +08:00
ipcc fs/inode: remove all unnecessary check for filep/inode 2023-08-29 09:47:11 +08:00
lcd drivers/lcd: change lcd stride from pixel to bytes 2023-11-14 07:30:29 -08:00
leds mm/alloc: remove all unnecessary cast for alloc 2023-08-30 14:34:20 +08:00
loop enable O_CLOEXEC explicit 2023-09-22 13:51:00 +08:00
math math/mpi: add mpi driver in math 2023-10-17 13:43:43 +08:00
misc cmake: add include path for special source 2023-11-07 17:39:03 +01:00
mmcsd Fix error: 'mmcsd_general_cmd_read' defined but not used 2023-09-26 00:45:50 +03:00
modem kernel: replace all usleep to nxsig_usleep in kernel space 2023-10-25 15:46:03 +08:00
motor drivers/foc: return scaling factor for phase currents and BEMF via ioctl 2023-11-14 04:34:49 -08:00
mtd mtd/mx25rxx: add support for MX25L25673G chip 2023-11-09 09:04:38 +08:00
net net/netdev: Support managing multiple IPv6 addresses by ioctl 2023-11-07 19:30:36 +08:00
note note: delete sched_note_flatten 2023-11-12 23:52:10 -08:00
pipes mm/alloc: remove all unnecessary cast for alloc 2023-08-30 14:34:20 +08:00
power pm: use pm_staytimeout() in greedy_governor_activity() 2023-10-31 09:05:40 +08:00
rc Fix Kconfig style 2023-08-02 16:57:09 +02:00
regmap Documentation: remove all migrated READMEs 2023-10-29 21:03:54 -03:00
reset added mutex lock before lookup reset controller by name 2023-08-11 20:39:16 +08:00
rf
rptun drivers/rptun: check the status before stop remote proc 2023-11-07 18:27:05 +08:00
segger drivers/segger/Kconfig: cosmetics 2023-11-13 06:08:30 -08:00
sensors cmake: add include path for special source 2023-11-07 17:39:03 +01:00
serial uart_tcsendbreak: Remove cancel point, as tcsendbreak is not one 2023-11-13 08:11:24 -08:00
spi driver/spi: avoid calling QPOLL to change rx_length and cause data loss 2023-09-24 10:34:55 +08:00
syslog Documentation: remove all migrated READMEs 2023-10-29 21:03:54 -03:00
timers Kconfigs: rename {Rpmsg|rpmsg} to RPMGS 2023-10-28 13:58:56 +08:00
usbdev driver/usbdev: return -ENOTCONN when usbdev had been unbind 2023-11-11 21:09:59 +08:00
usbhost Fix some typos in comments 2023-10-11 08:14:49 +02:00
usbmisc kernel: replace all usleep to nxsig_usleep in kernel space 2023-10-25 15:46:03 +08:00
usbmonitor
usrsock usrsock_rpmsg_server: Keep msg order in recursive call 2023-11-01 10:14:18 +08:00
video Documentation: remove all migrated READMEs 2023-10-29 21:03:54 -03:00
virtio kernel: replace all sem_* to nxsem_*: in kernel space 2023-10-25 15:46:03 +08:00
wireless bluetooth rpmsg depends on RPTUN 2023-10-27 13:27:05 -03:00
.gitignore
CMakeLists.txt
drivers_initialize.c drivers/serial: add ram uart driver 2023-09-19 09:41:07 +08:00
Kconfig nuttx/drivers: add regmap subsystems support. 2023-09-27 00:46:51 +08:00
Makefile nuttx/drivers: add regmap subsystems support. 2023-09-27 00:46:51 +08:00