sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
nuttx/boards/arm/stm32/stm32f4discovery/src/stm32f4discovery.h
Alan Carvalho de Assis 5322f909ef stm32f4discovery: Add support to WIZnet W5500
2022-09-15 01:55:47 +08:00

914 lines
29 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/stm32/stm32f4discovery/src/stm32f4discovery.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32_STM32F4DISCOVERY_SRC_STM32F4DISCOVERY_H
#define __BOARDS_ARM_STM32_STM32F4DISCOVERY_SRC_STM32F4DISCOVERY_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
#include <arch/stm32/chip.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* How many SPI modules does this chip support? */
#if STM32_NSPI < 1
# undef CONFIG_STM32_SPI1
# undef CONFIG_STM32_SPI2
# undef CONFIG_STM32_SPI3
#elif STM32_NSPI < 2
# undef CONFIG_STM32_SPI2
# undef CONFIG_STM32_SPI3
#elif STM32_NSPI < 3
# undef CONFIG_STM32_SPI3
#endif
#define PCA9635_I2CBUS 1
#define PCA9635_I2CADDR 0x40
/* Assume that we have everything */
#define HAVE_USBDEV 1
#define HAVE_USBHOST 1
#define HAVE_USBMONITOR 1
#define HAVE_SDIO 1
#define HAVE_CS43L22 1
#define HAVE_RTC_DRIVER 1
#define HAVE_NETMONITOR 1
#define HAVE_HCIUART 1
/* Can't support USB host or device features if USB OTG FS is not enabled */
#ifndef CONFIG_STM32_OTGFS
# undef HAVE_USBDEV
# undef HAVE_USBHOST
#endif
/* Can't support USB device if USB device is not enabled */
#ifndef CONFIG_USBDEV
# undef HAVE_USBDEV
#endif
/* Can't support USB host is USB host is not enabled */
#ifndef CONFIG_USBHOST
# undef HAVE_USBHOST
#endif
/* Check if we should enable the USB monitor before starting NSH */
#ifndef CONFIG_USBMONITOR
# undef HAVE_USBMONITOR
#endif
#ifndef HAVE_USBDEV
# undef CONFIG_USBDEV_TRACE
#endif
#ifndef HAVE_USBHOST
# undef CONFIG_USBHOST_TRACE
#endif
#if !defined(CONFIG_USBDEV_TRACE) && !defined(CONFIG_USBHOST_TRACE)
# undef HAVE_USBMONITOR
#endif
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO
* support is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO)
# undef HAVE_SDIO
#endif
#undef SDIO_MINOR /* Any minor number, default 0 */
#define SDIO_SLOTNO 0 /* Only one slot */
#ifdef HAVE_SDIO
# if !defined(CONFIG_NSH_MMCSDSLOTNO)
# define CONFIG_NSH_MMCSDSLOTNO SDIO_SLOTNO
# elif CONFIG_NSH_MMCSDSLOTNO != 0
# warning "Only one MMC/SD slot, slot 0"
# undef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO SDIO_SLOTNO
# endif
# if defined(CONFIG_NSH_MMCSDMINOR)
# define SDIO_MINOR CONFIG_NSH_MMCSDMINOR
# else
# define SDIO_MINOR 0
# endif
#endif
/* The CS43L22 depends on the CS43L22 driver, I2C1, and I2S3 support */
#if !defined(CONFIG_AUDIO_CS43L22) || !defined(CONFIG_STM32_I2C1) || \
!defined(CONFIG_STM32_I2S3)
# undef HAVE_CS43L22
#endif
#ifdef HAVE_CS43L22
/* The CS43L22 communicates on I2C1, I2C address 0x1a for control
* operations
*/
# define CS43L22_I2C_BUS 1
# define CS43L22_I2C_ADDRESS (0x94 >> 1)
/* The CS43L22 transfers data on I2S3 */
# define CS43L22_I2S_BUS 3
#endif
/* Check if we can support the RTC driver */
#if !defined(CONFIG_RTC) || !defined(CONFIG_RTC_DRIVER)
# undef HAVE_RTC_DRIVER
#endif
/* NSH Network monitor */
#if !defined(CONFIG_NET) || !defined(CONFIG_STM32_EMACMAC)
# undef HAVE_NETMONITOR
#endif
#if !defined(CONFIG_NSH_NETINIT_THREAD) || !defined(CONFIG_ARCH_PHY_INTERRUPT) || \
!defined(CONFIG_NETDEV_PHY_IOCTL) || !defined(CONFIG_NET_UDP)
# undef HAVE_NETMONITOR
#endif
/* The NSH Network Monitor cannot be used with the STM32F4DIS-BB base board.
* That is because the LAN8720 is configured in REF_CLK OUT mode. In that
* mode, the PHY interrupt is not supported. The NINT pin serves instead as
* REFLCK0.
*/
#ifdef CONFIG_STM32F4DISBB
# undef HAVE_NETMONITOR
#endif
/* procfs File System */
#ifdef CONFIG_FS_PROCFS
# ifdef CONFIG_NSH_PROC_MOUNTPOINT
# define STM32_PROCFS_MOUNTPOINT CONFIG_NSH_PROC_MOUNTPOINT
# else
# define STM32_PROCFS_MOUNTPOINT "/proc"
# endif
#endif
/* Check if we have the prerequisites for an HCI UART */
#if !defined(CONFIG_STM32_HCIUART) || !defined(CONFIG_BLUETOOTH_UART)
# undef HAVE_HCIUART
#elif defined(CONFIG_STM32_USART1_HCIUART)
# define HCIUART_SERDEV HCIUART1
#elif defined(CONFIG_STM32_USART2_HCIUART)
# define HCIUART_SERDEV HCIUART2
#elif defined(CONFIG_STM32_USART3_HCIUART)
# define HCIUART_SERDEV HCIUART3
#elif defined(CONFIG_STM32_USART6_HCIUART)
# define HCIUART_SERDEV HCIUART6
#elif defined(CONFIG_STM32_UART7_HCIUART)
# define HCIUART_SERDEV HCIUART7
#elif defined(CONFIG_STM32_UART8_HCIUART)
# define HCIUART_SERDEV HCIUART8
#else
# error No HCI UART specifified
#endif
/* STM32F4 Discovery GPIOs **************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN12)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
#define GPIO_LED4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
/* BUTTONS -- NOTE that all have EXTI interrupts configured */
#define MIN_IRQBUTTON BUTTON_USER
#define MAX_IRQBUTTON BUTTON_USER
#define NUM_IRQBUTTONS 1
#define GPIO_BTN_USER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0)
#define GPIO_CS43L22_RESET (GPIO_OUTPUT|GPIO_SPEED_50MHz|GPIO_PORTD|GPIO_PIN4)
/* Digital Joystick 5-WAY */
#define GPIO_JOY_UP (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTE|GPIO_PIN2)
#define GPIO_JOY_CENTER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTE|GPIO_PIN3)
#define GPIO_JOY_LEFT (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTE|GPIO_PIN4)
#define GPIO_JOY_DOWN (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTE|GPIO_PIN5)
#define GPIO_JOY_RIGHT (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTE|GPIO_PIN6)
/* LoRa SX127x */
#define GPIO_SX127X_DIO0 (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN0)
#define GPIO_SX127X_RESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_OUTPUT_CLEAR|\
GPIO_SPEED_50MHz|GPIO_PORTD|GPIO_PIN4)
/* PWM
*
* The STM32F4 Discovery has no real on-board PWM devices, but the board can
* be configured to output a pulse train using TIM4 CH2 on PD13.
*/
#define STM32F4DISCOVERY_PWMTIMER 4
#define STM32F4DISCOVERY_PWMCHANNEL 2
/* Capture
*
* The STM32F4 Discovery has no real on-board pwm capture devices, but the
* board can be configured to capture pwm using TIM3 CH2 PB5.
*/
#define STM32F4DISCOVERY_CAPTURETIMER 3
#define STM32F4DISCOVERY_CAPTURECHANNEL 2
/* SPI chip selects */
#define GPIO_CS_MEMS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
#define GPIO_MAX31855_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN8)
#define GPIO_MAX6675_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN8)
#define GPIO_SX127X_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN8)
#define GPIO_MAX7219_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN3)
#define GPIO_GS2200M_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
#define GPIO_ENC28J60_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
#define GPIO_ENC28J60_RESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN1)
#define GPIO_ENC28J60_INTR (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|\
GPIO_OPENDRAIN|GPIO_PORTE|GPIO_PIN4)
/* Use same pins as ENC28J60 to W5500 */
#define GPIO_W5500_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
#define GPIO_W5500_RESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN1)
#define GPIO_W5500_INTR (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|\
GPIO_OPENDRAIN|GPIO_PORTE|GPIO_PIN4)
/* USB OTG FS
*
* PA9 OTG_FS_VBUS VBUS sensing (also connected to the green LED)
* PC0 OTG_FS_PowerSwitchOn
* PD5 OTG_FS_Overcurrent
*/
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
#define GPIO_OTGFS_PWRON (GPIO_OUTPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
GPIO_PUSHPULL|GPIO_PORTC|GPIO_PIN0)
#ifdef CONFIG_USBHOST
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_EXTI|GPIO_FLOAT|\
GPIO_SPEED_100MHz|GPIO_PUSHPULL|\
GPIO_PORTD|GPIO_PIN5)
#else
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN5)
#endif
/* UG-2864AMBAG01 or UG-2864HSWEG01 OLED Display (SPI 4-wire):
*
* --------------------------+----------------------------------------------
* Connector CON10 J1: | STM32F4Discovery
* --------------+-----------+----------------------------------------------
* CON10 J1: | CON20 J2: | P1/P2:
* --------------+-----------+----------------------------------------------
* 1 3v3 | 3,4 3v3 | P2 3V
* 3 /RESET | 8 /RESET | P2 PB6 (Arbitrary selection)
* 5 /CS | 7 /CS | P2 PB7 (Arbitrary selection)
* 7 A0|D/C | 9 A0|D/C | P2 PB8 (Arbitrary selection)
* 9 LED+ (N/C) | ----- | -----
* 2 5V Vcc | 1,2 Vcc | P2 5V
* 4 DI | 18 D1/SI | P1 PA7 (GPIO_SPI1_MOSI == GPIO_SPI1_MOSI_1(1))
* 6 SCLK | 19 D0/SCL | P1 PA5 (GPIO_SPI1_SCK == GPIO_SPI1_SCK_1(1))
* 8 LED- (N/C) | ----- | ------
* 10 GND | 20 GND | P2 GND
* --------------+-----------+----------------------------------------------
* (1) Required because of on-board MEMS
* -------------------------------------------------------------------------
*/
#if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01) || \
defined(CONFIG_LCD_SSD1351)
# define GPIO_OLED_RESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
# define GPIO_OLED_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN7)
# define GPIO_OLED_A0 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
# define GPIO_OLED_DC GPIO_OLED_A0
#endif
/* Display JLX12864G */
#define STM32_LCD_RST (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN6)
#define STM32_LCD_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN7)
#define STM32_LCD_RS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
/* STM32F4DIS-BB MicroSD
*
* ---------- ------------- ------------------------------
* PIO SIGNAL Comments
* ---------- ------------- ------------------------------
* PB15 NCD Pulled up externally
* PC9 DAT1 Configured by driver
* PC8 DAT0 " " "" " "
* PC12 CLK " " "" " "
* PD2 CMD " " "" " "
* PC11 CD/DAT3 " " "" " "
* PC10 DAT2 " " "" " "
* ---------- ------------- ------------------------------
*/
#if defined(CONFIG_STM32F4DISBB) && defined(CONFIG_STM32_SDIO)
# define GPIO_SDIO_NCD (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|\
GPIO_PORTB|GPIO_PIN15)
#endif
/* STM32F4DIS-BB LAN8720
*
* ---------- ------------- ------------------------------
* PIO SIGNAL Comments
* ---------- ------------- ------------------------------
* PB11 TXEN Configured by driver
* PB12 TXD0 " " "" " "
* PB13 TXD1 " " "" " "
* PC4 RXD0/MODE0 " " "" " "
* PC5 RXD1/MODE1 " " "" " "
* PA7 CRS_DIV/MODE2 " " "" " "
* PA2 MDIO " " "" " "
* PC1 MDC " " "" " "
* PA1 NINT/REFCLK0 " " "" " "
* PE2 DAT2 " " "" " "
* ---------- ------------- ------------------------------
*/
#if defined(CONFIG_STM32F4DISBB) && defined(CONFIG_STM32_ETHMAC)
# define GPIO_EMAC_NINT (GPIO_INPUT|GPIO_PULLUP|GPIO_EXTI|\
GPIO_PORTA|GPIO_PIN1)
# define GPIO_EMAC_NRST (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: stm32_bringup
*
* Description:
* Perform architecture-specific initialization
*
* CONFIG_BOARD_LATE_INITIALIZE=y :
* Called from board_late_initialize().
*
* CONFIG_BOARD_LATE_INITIALIZE=y && CONFIG_BOARDCTL=y :
* Called from the NSH library
*
****************************************************************************/
int stm32_bringup(void);
/****************************************************************************
* Name: stm32_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the stm32f4discovery
* board.
*
****************************************************************************/
void weak_function stm32_spidev_initialize(void);
/****************************************************************************
* Name: stm32_i2sdev_initialize
*
* Description:
* Called to configure I2S chip select GPIO pins for the stm32f4discovery
* board.
*
****************************************************************************/
void weak_function stm32_i2sdev_initialize(void);
/****************************************************************************
* Name: stm32_bh1750initialize
*
* Description:
* Called to configure an I2C and to register BH1750FVI for the
* stm32f4discovery board.
*
****************************************************************************/
#ifdef CONFIG_SENSORS_BH1750FVI
int stm32_bh1750initialize(const char *devpath);
#endif
/****************************************************************************
* Name: stm32_lpwaninitialize
*
* Description:
* Initialize SX127X LPWAN interaface.
****************************************************************************/
#ifdef CONFIG_LPWAN_SX127X
int stm32_lpwaninitialize(void);
#endif
/****************************************************************************
* Name: stm32_mmcsdinitialize
*
* Description:
* Sets up MMC/SD interface.
*
****************************************************************************/
#ifdef CONFIG_MMCSD_SPI
int stm32_mmcsd_initialize(int port, int minor);
#endif
/****************************************************************************
* Name: nunchuck_initialize
*
* Description:
* Initialize and register the button joystick driver
*
****************************************************************************/
#ifdef CONFIG_INPUT_NUNCHUCK
int nunchuck_initialize(char *devname);
#endif
/****************************************************************************
* Name: stm32_max7219init
*
* Description:
* Initialize and register the max7219 numeric display controller
*
****************************************************************************/
#ifdef CONFIG_LEDS_MAX7219
int stm32_max7219init(const char *devpath);
#endif
/****************************************************************************
* Name: stm32_ds1307_init
*
* Description:
* Initialize and register the DS1307 RTC
*
****************************************************************************/
#ifdef CONFIG_RTC_DS1307
int stm32_ds1307_init(void);
#endif
/****************************************************************************
* Name: stm32_st7032init
*
* Description:
* Initialize and register the Sitronix ST7032i
*
****************************************************************************/
int stm32_st7032init(const char *devpath);
/****************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called from stm32_usbinitialize very early in initialization to setup
* USB-related GPIO pins for the STM32F4Discovery board.
*
****************************************************************************/
#ifdef CONFIG_STM32_OTGFS
void weak_function stm32_usbinitialize(void);
#endif
/****************************************************************************
* Name: stm32_usbhost_initialize
*
* Description:
* Called at application startup time to initialize the USB host
* functionality. This function will start a thread that will monitor for
* device connection/disconnection events.
*
****************************************************************************/
#if defined(CONFIG_STM32_OTGFS) && defined(CONFIG_USBHOST)
int stm32_usbhost_initialize(void);
#endif
/****************************************************************************
* Name: stm32_pwm_setup
*
* Description:
* Initialize PWM and register the PWM device.
*
****************************************************************************/
#ifdef CONFIG_PWM
int stm32_pwm_setup(void);
#endif
/****************************************************************************
* Name: stm32_capture_setup
*
* Description:
* Initialize pwm capture support
*
****************************************************************************/
#ifdef CONFIG_CAPTURE
int stm32_capture_setup(FAR const char *devpath);
#endif
/****************************************************************************
* Name: stm32_can_setup
*
* Description:
* Initialize CAN and register the CAN device
*
****************************************************************************/
#ifdef CONFIG_STM32_CAN_CHARDRIVER
int stm32_can_setup(void);
#endif
/****************************************************************************
* Name: stm32_extmemgpios
*
* Description:
* Initialize GPIOs for external memory usage
*
****************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemgpios(const uint32_t *gpios, int ngpios);
#endif
/****************************************************************************
* Name: stm32_extmemaddr
*
* Description:
* Initialize address line GPIOs for external memory access
*
****************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemaddr(int naddrs);
#endif
/****************************************************************************
* Name: stm32_extmemdata
*
* Description:
* Initialize data line GPIOs for external memory access
*
****************************************************************************/
#ifdef CONFIG_STM32_FSMC
void stm32_extmemdata(int ndata);
#endif
/****************************************************************************
* Name: stm32_led_pminitialize
*
* Description:
* Enable logic to use the LEDs on the STM32F4Discovery to support power
* management testing
*
****************************************************************************/
#ifdef CONFIG_PM
void stm32_led_pminitialize(void);
#endif
/****************************************************************************
* Name: stm32_pm_buttons
*
* Description:
* Configure the user button of the STM32f4discovery board as EXTI,
* so it is able to wakeup the MCU from the PM_STANDBY mode
*
****************************************************************************/
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_IDLE_CUSTOM) && \
defined(CONFIG_PM_BUTTONS)
void stm32_pm_buttons(void);
#endif
/****************************************************************************
* Name: stm32_sdio_initialize
*
* Description:
* Initialize SDIO-based MMC/SD card support
*
****************************************************************************/
#if !defined(CONFIG_DISABLE_MOUNTPOINT) && defined(CONFIG_STM32_SDIO)
int stm32_sdio_initialize(void);
#endif
/****************************************************************************
* Name: stm32_netinitialize
*
* Description:
* Configure board resources to support networking.
*
****************************************************************************/
#ifdef HAVE_NETMONITOR
void weak_function stm32_netinitialize(void);
#endif
/****************************************************************************
* Name: stm32_zerocross_initialize
*
* Description:
* Initialize and register the zero cross driver
*
****************************************************************************/
#ifdef CONFIG_SENSORS_ZEROCROSS
int stm32_zerocross_initialize(void);
#endif
/****************************************************************************
* Name: stm32_max31855initialize
*
* Description:
* Initialize and register the MAX31855 Temperature Sensor driver.
*
* Input Parameters:
* devpath - The full path to the driver to register. E.g., "/dev/temp0"
* bus - Bus number (for hardware that has multiple SPI interfaces)
* devid - ID associated to the device. E.g., 0, 1, 2, etc.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
#ifdef CONFIG_SENSORS_MAX31855
int stm32_max31855initialize(const char *devpath, int bus,
uint16_t devid);
#endif
/****************************************************************************
* Name: stm32_mlx90614init
*
* Description:
* Called to configure an I2C and to register MLX90614 for the
* stm32f103-minimum board.
*
****************************************************************************/
#ifdef CONFIG_SENSORS_MLX90614
int stm32_mlx90614init(const char *devpath);
#endif
/****************************************************************************
* Name: stm32_max6675initialize
*
* Description:
* Initialize and register the max6675 driver
*
****************************************************************************/
#ifdef CONFIG_SENSORS_MAX6675
int stm32_max6675initialize(const char *devpath);
#endif
/****************************************************************************
* Name: stm32_cs43l22_initialize
*
* Description:
* This function is called by platform-specific, setup logic to configure
* and register the CS43L22 device. This function will register the
* driver as /dev/cs43l22[x] where x is determined by the minor device
* number.
*
* Input Parameters:
* minor - The input device minor number
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
#ifdef HAVE_CS43L22
int stm32_cs43l22_initialize(int minor);
#endif /* HAVE_CS43L22 */
/****************************************************************************
* Name: stm32_pca9635_initialize
*
* Description:
* This function is called by board initialization logic to configure the
* LED PWM chip. This function will register the driver as /dev/leddrv0.
*
* Input Parameters:
* None
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_PCA9635PW
int stm32_pca9635_initialize(void);
#endif
/****************************************************************************
* Name: stm32_rgbled_setup
*
* Description:
* This function is called by board initialization logic to configure the
* RGB LED driver. This function will register the driver as /dev/rgbled0.
*
* Input Parameters:
* None
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_RGBLED
int stm32_rgbled_setup(void);
#endif
/****************************************************************************
* Name: stm32_timer_driver_setup
*
* Description:
* Configure the timer driver.
*
* Input Parameters:
* devpath - The full path to the timer device. This should be of the
* form /dev/timer0
* timer - The timer's number.
*
* Returned Value:
* Zero (OK) is returned on success; A negated errno value is returned
* to indicate the nature of any failure.
*
****************************************************************************/
#ifdef CONFIG_TIMER
int stm32_timer_driver_setup(const char *devpath, int timer);
#endif
/****************************************************************************
* Name: xen1210_archinitialize
*
* Description:
* Each board that supports an xen1210 device must provide this function.
* This function is called by application-specific, setup logic to
* configure the accelerometer device. This function will register the
* driver as /dev/accelN where N is the minor device number.
*
* Input Parameters:
* minor - The input device minor number
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_SENSORS_XEN1210
int xen1210_archinitialize(int minor);
#endif
/****************************************************************************
* Name: hciuart_dev_initialize
*
* Description:
* This function is called by board initialization logic to configure the
* Bluetooth HCI UART driver
*
* Input Parameters:
* None
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
#ifdef HAVE_HCIUART
int hciuart_dev_initialize(void);
#endif
/****************************************************************************
* Name: stm32_gs2200m_initialize
*
* Description:
* Configure the gs2200m driver.
*
* Input Parameters:
* devpath - The full path to the device.
* bus - The SPI bus number
*
* Returned Value:
* Zero (OK) is returned on success; A negated errno value is returned
* to indicate the nature of any failure.
*
****************************************************************************/
#ifdef CONFIG_WL_GS2200M
int stm32_gs2200m_initialize(const char *devpath, int bus);
#endif
/****************************************************************************
* Name: stm32_djoy_initialize
*
* Description:
* Initialize and register the discrete joystick driver
*
****************************************************************************/
#ifdef CONFIG_INPUT_DJOYSTICK
int stm32_djoy_initialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_ARM_STM32_STM32F4DISCOVERY_SRC_STM32F4DISCOVERY_H */
Reference in New Issue View Git Blame Copy Permalink