nuttx/arch/arm/src/cxd56xx/cxd56_gpioint.h
Alin Jerpelea c78bd930b5 arch: arm: sxd56xx: nxstyle fixes
Fix nxstyle complains

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-06 20:49:54 +08:00

237 lines
7.9 KiB
C

/****************************************************************************
* arch/arm/src/cxd56xx/cxd56_gpioint.h
*
* Copyright (C) 2008-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Copyright 2018 Sony Semiconductor Solutions Corporation
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name of Sony Semiconductor Solutions Corporation nor
* the names of its contributors may be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_CXD56XX_CXD56_GPIOINT_H
#define __ARCH_ARM_SRC_CXD56XX_CXD56_GPIOINT_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* 32-bit encoded gpioconf value
*
* 3322 2222 2222 1111 1111 1100 0000 0000
* 1098 7654 3210 9876 5432 1098 7654 3210
* ---- ---- ---- ---- ---- ---- ---- ----
* .... .... .... ..B. .... .... .... .... Both detect mode
* .... .... .... ...T .... .... .... .... Toggle detect mode
* .... .... .... .... .... .... .... N... Noise Filter
* .... .... .... .... .... .... .... .YYY Polarity
*/
/* GPIO Interrupt Polarity Definitions */
/* #define GPIOINT_INSTANT_HIGH (0) */ /* Not supported */
/* #define GPIOINT_INSTANT_LOW (1) */ /* Not supported */
#define GPIOINT_LEVEL_HIGH (2) /* High Level */
#define GPIOINT_LEVEL_LOW (3) /* Low Level */
#define GPIOINT_EDGE_RISE (4) /* Rising Edge */
#define GPIOINT_EDGE_FALL (5) /* Falling Edge */
#define GPIOINT_EDGE_BOTH (7) /* Both Edge */
#define GPIOINT_PSEUDO_EDGE_RISE (GPIOINT_LEVEL_HIGH | \
GPIOINT_TOGGLE_MODE_MASK)
/* Rising Edge without clear */
#define GPIOINT_PSEUDO_EDGE_FALL (GPIOINT_LEVEL_LOW | \
GPIOINT_TOGGLE_MODE_MASK)
/* Falling Edge without clear */
#define GPIOINT_PSEUDO_EDGE_BOTH (GPIOINT_TOGGLE_MODE_MASK | \
GPIOINT_TOGGLE_BOTH_MASK)
/* Both Edge without clear */
/* GPIO Interrupt Noise Filter Definitions */
#define GPIOINT_NOISE_FILTER_ENABLE (1u << 3)
#define GPIOINT_NOISE_FILTER_DISABLE (0u << 3)
/* Use Pseudo Edge Interrupt */
#define GPIOINT_TOGGLE_MODE_MASK (1u << 16)
#define GPIOINT_TOGGLE_BOTH_MASK (1u << 17)
/****************************************************************************
* Public Types
****************************************************************************/
struct cxd56_gpioint_status_s
{
int irq;
uint32_t polarity;
bool filter;
bool enable;
};
typedef struct cxd56_gpioint_status_s cxd56_gpioint_status_t;
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Functions Prototypes
****************************************************************************/
/****************************************************************************
* Name: cxd56_gpioint_config
*
* Description:
* Configure a GPIO pin as an GPIO pin interrupt source
*
* Input Parameters:
* pin - Pin number defined in cxd56_pinconfig.h
* gpiocfg - GPIO Interrupt Polarity and Noise Filter Configuration Value
* isr - Interrupt handler
* arg - Argument for the interrupt handler
*
* Returned Value:
* IRQ number on success; a negated errno value on failure.
*
* Assumptions:
* The interrupt are disabled so that read-modify-write operations
* are safe.
*
****************************************************************************/
int cxd56_gpioint_config(uint32_t pin, uint32_t gpiocfg, xcpt_t isr,
FAR void *arg);
/****************************************************************************
* Name: cxd56_gpioint_irq
*
* Description:
* Get a GPIO interrupt number for specified pin number
*
* Returned Value:
* IRQ number on success; a negated errno value on failure.
*
****************************************************************************/
int cxd56_gpioint_irq(uint32_t pin);
/****************************************************************************
* Name: cxd56_gpioint_pin
*
* Description:
* Get a pin number for specified IRQ number
*
* Returned Value:
* Pin number on success; a negated errno value on failure.
*
****************************************************************************/
int cxd56_gpioint_pin(int irq);
/****************************************************************************
* Name: cxd56_gpioint_enable
*
* Description:
* Enable a GPIO interrupt for specified pin number
*
* Returned Value:
* None
*
****************************************************************************/
void cxd56_gpioint_enable(uint32_t pin);
/****************************************************************************
* Name: cxd56_gpioint_disable
*
* Description:
* Disable a GPIO interrupt for specified pin number
*
* Returned Value:
* None
*
****************************************************************************/
void cxd56_gpioint_disable(uint32_t pin);
/****************************************************************************
* Name: cxd56_gpioint_invert
*
* Description:
* Invert polarity of a GPIO interrupt for specified pin number
*
* Returned Value:
* None
*
****************************************************************************/
void cxd56_gpioint_invert(uint32_t pin);
/****************************************************************************
* Name: cxd56_gpioint_status
*
* Description:
* Get a gpio interrupt status
*
* Returned Value:
* OK on success; A negated errno value on failure.
*
****************************************************************************/
int cxd56_gpioint_status(uint32_t pin, cxd56_gpioint_status_t *stat);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_CXD56XX_CXD56_GPIOINT_H */