Paul A. Patience 06a88178af Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize

2015-10-06 23:49:28 -04:00

..

.gitignore

…

Makefile

Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize

2015-10-06 23:49:28 -04:00

stm32_appinitialize.c

Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize

2015-10-06 23:49:28 -04:00

stm32_autoleds.c

configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions

2015-02-27 18:49:24 -06:00

stm32_bmp180.c

Remove dangling whitespace

2015-10-04 15:28:03 -06:00

stm32_boot.c

STM32F4-Discovery: Add support for the NSH network initialization thread in the netnsh configuration. Attempted to enable the networking monitor as well, but it turns out that the PHY interrupt is not supported with the STM32F4-DISBB base board

2015-09-28 10:58:47 -06:00

stm32_bringup.c

Configure stm32f4discovery board to support MAX31855 driver

2015-09-13 15:50:02 -06:00

stm32_buttons.c

Move board_ prototypes from arch.h to board.h

2015-02-27 20:02:03 -06:00

stm32_ethernet.c

STM32F4-Discovery: Add support for the NSH network initialization thread in the netnsh configuration. Attempted to enable the networking monitor as well, but it turns out that the PHY interrupt is not supported with the STM32F4-DISBB base board

2015-09-28 10:58:47 -06:00

stm32_extmem.c

…

stm32_idle.c

Eliminate warnings

2015-09-08 10:19:34 -06:00

stm32_max31855.c

Remove dangling whitespace

2015-10-04 15:28:03 -06:00

stm32_nsh.c

configs/stm32f4discovery/: Add support to BMP180 driver on STM32F4Discovery. From Alan Carvalho de Assis.

2015-07-20 07:22:01 -06:00

stm32_pm.c

Rename pwm_devinit() to board_pwm_setup(). Add CONFIG_BOARDCTL_PWMTEST that will enable calling board_pwm_setup() from boardctl(). Replace calls to pwm_devinit() in apps/examples/pwm with calls to boardctl(). In all configurations that enable the apps/examples/pwm test, make sure that boardctl() suppoprt is properly enabled.

2015-03-31 16:59:22 -06:00

stm32_pmbuttons.c

Move board_ prototypes from arch.h to board.h

2015-02-27 20:02:03 -06:00

stm32_pwm.c

Fix dedbug output; used wrong macro

2015-04-16 12:37:47 -06:00

stm32_qencoder.c

Make some file section headers more consistent with standard

2015-04-08 09:15:17 -06:00

stm32_sdio.c

Make some file section headers more consistent with standard

2015-04-08 09:15:17 -06:00

stm32_spi.c

STM32F4-Discovery: Add SSD1351 SPI 4-wire interface

2015-10-06 19:05:32 -04:00

stm32_ssd1289.c

Fix typo

2015-09-10 21:20:53 -04:00

stm32_ssd1351.c

STM32F4-Discovery: Add SSD1351 SPI 4-wire interface

2015-10-06 19:05:32 -04:00

stm32_ug2864ambag01.c

Make some file section headers more consistent with standard

2015-04-08 09:15:17 -06:00

stm32_ug2864hsweg01.c

Make some file section headers more consistent with standard

2015-04-08 09:15:17 -06:00

stm32_usb.c

Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected.

2015-05-06 14:11:29 -06:00

stm32_userleds.c

Make some file section headers more consistent with standard

2015-04-08 09:15:17 -06:00

stm32_watchdog.c

Make some file section headers more consistent with standard

2015-04-08 09:15:17 -06:00

stm32f4discovery.h

STM32F4-Discovery: Add SSD1351 SPI 4-wire interface

2015-10-06 19:05:32 -04:00