367 lines
13 KiB
C
367 lines
13 KiB
C
/************************************************************************************
|
||
* configs/stm32f411e-disco/include/board.h
|
||
*
|
||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||
* Author: Konstantin Berezenko <kpberezenko@gmail.com>
|
||
*
|
||
* based on configs/nucleo-f4x1re/include/board.h
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
************************************************************************************/
|
||
|
||
#ifndef __CONFIGS_STM32F411E_DISCO_INCLUDE_BOARD_H
|
||
#define __CONFIGS_STM32F411E_DISCO_INCLUDE_BOARD_H
|
||
|
||
/************************************************************************************
|
||
* Included Files
|
||
************************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
#ifndef __ASSEMBLY__
|
||
# include <stdint.h>
|
||
#endif
|
||
|
||
#include <stm32.h>
|
||
|
||
/************************************************************************************
|
||
* Pre-processor Definitions
|
||
************************************************************************************/
|
||
|
||
/* Clocking *************************************************************************/
|
||
/*
|
||
* System Clock source : PLLCLK (HSE)
|
||
* SYSCLK(Hz) : 96000000 Determined by PLL configuration
|
||
* HCLK(Hz) : 96000000 (STM32_RCC_CFGR_HPRE)
|
||
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
||
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
||
* HSI Frequency(Hz) : 16000000 (nominal)
|
||
* PLLM : 4 (STM32_PLLCFG_PLLM)
|
||
* PLLN : 192 (STM32_PLLCFG_PLLN)
|
||
* PLLP : 4 (STM32_PLLCFG_PLLP)
|
||
* PLLQ : 8 (STM32_PLLCFG_PPQ)
|
||
* Flash Latency(WS) : 3
|
||
* Prefetch Buffer : OFF
|
||
* Instruction cache : ON
|
||
* Data cache : ON
|
||
* Require 48MHz for USB OTG FS, : Enabled
|
||
* SDIO and RNG clock
|
||
*/
|
||
|
||
/* HSI - 16 MHz RC factory-trimmed
|
||
* LSI - 32 KHz RC
|
||
* HSE - 8 MHz Crystal
|
||
* LSE - not installed
|
||
*/
|
||
|
||
#define STM32_BOARD_XTAL 8000000ul
|
||
|
||
#define STM32_HSI_FREQUENCY 16000000ul
|
||
#define STM32_LSI_FREQUENCY 32000
|
||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||
|
||
/* Main PLL Configuration.
|
||
*
|
||
* Formulae:
|
||
*
|
||
* VCO input frequency = PLL input clock frequency / PLLM, 2 <= PLLM <= 63
|
||
* VCO output frequency = VCO input frequency × PLLN, 192 <= PLLN <= 432
|
||
* PLL output clock frequency = VCO frequency / PLLP, PLLP = 2, 4, 6, or 8
|
||
* USB OTG FS clock frequency = VCO frequency / PLLQ, 2 <= PLLQ <= 15
|
||
*
|
||
* There is no config for 100 MHz and 48 MHz for usb,
|
||
* so we would like to have SYSYCLK=96MHz and we must have the USB clock= 48MHz.
|
||
*
|
||
* PLLQ = 8 PLLP = 4 PLLN=192 PLLM=4
|
||
*
|
||
* We will configure like this
|
||
*
|
||
* PLL source is HSE
|
||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||
* = (8,000,000 / 4) * 192
|
||
* = 384,000,000
|
||
* SYSCLK = PLL_VCO / PLLP
|
||
* = 384,000,000 / 4 = 96,000,000
|
||
* USB OTG FS and SDIO Clock
|
||
* = PLL_VCO / PLLQ
|
||
* = 384,000,000 / 8 = 48,000,000
|
||
*/
|
||
|
||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(4)
|
||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(192)
|
||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_4
|
||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(8)
|
||
|
||
#define STM32_SYSCLK_FREQUENCY 96000000ul
|
||
|
||
/* AHB clock (HCLK) is SYSCLK (96MHz) */
|
||
|
||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
||
|
||
/* APB1 clock (PCLK1) is HCLK/4 (24MHz) */
|
||
|
||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||
|
||
/* Timers driven from APB1 will be twice PCLK1 */
|
||
/* REVISIT */
|
||
|
||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
|
||
/* APB2 clock (PCLK2) is HCLK (48MHz) */
|
||
|
||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||
|
||
/* Timers driven from APB2 will be twice PCLK2 */
|
||
|
||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||
|
||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||
* otherwise frequency is 2xAPBx.
|
||
* Note: TIM1,8 are on APB2, others on APB1
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#define BOARD_TIM1_FREQUENCY (2 * STM32_PCLK2_FREQUENCY)
|
||
#define BOARD_TIM2_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
||
#define BOARD_TIM3_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
||
#define BOARD_TIM4_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
||
#define BOARD_TIM5_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
||
#define BOARD_TIM6_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
||
#define BOARD_TIM7_FREQUENCY (2 * STM32_PCLK1_FREQUENCY)
|
||
#define BOARD_TIM8_FREQUENCY (2 * STM32_PCLK2_FREQUENCY)
|
||
|
||
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
||
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
||
* to service FIFOs in interrupt driven mode. These values have not been
|
||
* tuned!!!
|
||
*
|
||
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
|
||
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
|
||
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#ifdef CONFIG_SDIO_DMA
|
||
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#else
|
||
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#endif
|
||
|
||
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
|
||
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||
*/
|
||
/* REVISIT */
|
||
|
||
#ifdef CONFIG_SDIO_DMA
|
||
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#else
|
||
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||
#endif
|
||
|
||
/* DMA Channel/Stream Selections ****************************************************/
|
||
/* Stream selections are arbitrary for now but might become important in the future
|
||
* is we set aside more DMA channels/streams.
|
||
*
|
||
* SDIO DMA
|
||
* DMAMAP_SDIO_1 = Channel 4, Stream 3 <- may later be used by SPI DMA
|
||
* DMAMAP_SDIO_2 = Channel 4, Stream 6
|
||
*/
|
||
|
||
#define DMAMAP_SDIO DMAMAP_SDIO_1
|
||
|
||
/* Need to VERIFY fwb */
|
||
|
||
#define DMACHAN_SPI1_RX DMAMAP_SPI1_RX_1
|
||
#define DMACHAN_SPI1_TX DMAMAP_SPI1_TX_1
|
||
#define DMACHAN_SPI2_RX DMAMAP_SPI2_RX
|
||
#define DMACHAN_SPI2_TX DMAMAP_SPI2_TX
|
||
|
||
/* Alternate function pin selections ************************************************/
|
||
|
||
/* USART1:
|
||
* RXD: PA10 CN9 pin 3, CN10 pin 33
|
||
* PB7 CN7 pin 21
|
||
* TXD: PA9 CN5 pin 1, CN10 pin 21
|
||
* PB6 CN5 pin 3, CN10 pin 17
|
||
*/
|
||
|
||
#if 1
|
||
# define GPIO_USART1_RX GPIO_USART1_RX_1 /* PA10 */
|
||
# define GPIO_USART1_TX GPIO_USART1_TX_1 /* PA9 */
|
||
#else
|
||
# define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
|
||
# define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
|
||
#endif
|
||
|
||
/* USART2:
|
||
* RXD: PA3 CN9 pin 1 (See SB13, 14, 62, 63). CN10 pin 37
|
||
* PD6
|
||
* TXD: PA2 CN9 pin 2(See SB13, 14, 62, 63). CN10 pin 35
|
||
* PD5
|
||
*/
|
||
|
||
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
|
||
#define GPIO_USART2_TX GPIO_USART2_TX_1 /* PA2 */
|
||
#define GPIO_USART2_RTS GPIO_USART2_RTS_2
|
||
#define GPIO_USART2_CTS GPIO_USART2_CTS_2
|
||
|
||
/* USART6:
|
||
* RXD: PC7 CN5 pin2, CN10 pin 19
|
||
* PA12 CN10, pin 12
|
||
* TXD: PC6 CN10, pin 4
|
||
* PA11 CN10, pin 14
|
||
*/
|
||
|
||
#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
|
||
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
|
||
|
||
/* UART RX DMA configurations */
|
||
|
||
#define DMAMAP_USART1_RX DMAMAP_USART1_RX_2
|
||
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2
|
||
|
||
/* I2C
|
||
*
|
||
* The optional _GPIO configurations allow the I2C driver to manually
|
||
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||
* but are normally-high GPIOs.
|
||
*/
|
||
|
||
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2
|
||
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
|
||
#define GPIO_I2C1_SCL_GPIO \
|
||
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
|
||
#define GPIO_I2C1_SDA_GPIO \
|
||
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
|
||
|
||
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1
|
||
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1
|
||
#define GPIO_I2C2_SCL_GPIO \
|
||
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10)
|
||
#define GPIO_I2C2_SDA_GPIO \
|
||
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
|
||
|
||
/* SPI
|
||
*
|
||
* There are sensors on SPI1, and SPI2 is connected to the FRAM.
|
||
*/
|
||
|
||
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
|
||
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
|
||
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
|
||
|
||
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1
|
||
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1
|
||
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2
|
||
|
||
/* LEDs
|
||
*
|
||
* The STM32F411E Discovery board has four user leds but only one is configured so far.
|
||
* LD2 connected to PD12.
|
||
*/
|
||
|
||
/* LED index values for use with board_userled() */
|
||
|
||
#define BOARD_LD2 0
|
||
#define BOARD_NLEDS 1
|
||
|
||
/* LED bits for use with board_userled_all() */
|
||
|
||
#define BOARD_LD2_BIT (1 << BOARD_LD2)
|
||
|
||
/* Buttons
|
||
*
|
||
* B1 USER: the user button is connected to the I/O PA0 of the STM32
|
||
* microcontroller.
|
||
*/
|
||
|
||
#define BUTTON_USER 0
|
||
#define NUM_BUTTONS 1
|
||
|
||
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
||
|
||
/************************************************************************************
|
||
* Public Data
|
||
************************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
#define EXTERN extern "C"
|
||
extern "C"
|
||
{
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
/************************************************************************************
|
||
* Public Function Prototypes
|
||
************************************************************************************/
|
||
/************************************************************************************
|
||
* Name: stm32_boardinitialize
|
||
*
|
||
* Description:
|
||
* All STM32 architectures must provide the following entry point. This entry point
|
||
* is called early in the initialization -- after all memory has been configured
|
||
* and mapped but before any devices have been initialized.
|
||
*
|
||
************************************************************************************/
|
||
|
||
void stm32_boardinitialize(void);
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __CONFIGS_STM32F411E_DISCO_INCLUDE_BOARD_H */
|