nuttx

History

YAMAMOTO Takashi 58bdcbab9b Revert "Make: use gcc as LD" This reverts commit `45672c269d`. Because: * It's very confusing to have cc as LD. * I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are supposed to do when we use LD directly. It would be simpler to remove them from our LDFLAGS.		2021-09-08 09:40:48 +08:00
..
configs/usbnsh	sched/task: delete CONFIG_MAX_TASKS limit	2021-07-11 19:42:30 -07:00
include	Removes STM32_BOARD_HCLK from all board.h files. It is now unneccessary. Use STM32_HCLK_FREQUENCY instead.	2021-04-06 22:42:06 -05:00
scripts	Revert "Make: use gcc as LD"	2021-09-08 09:40:48 +08:00
src	Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL	2021-08-06 13:58:26 +02:00
Kconfig	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00
README.txt	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-H405 is based on the configuration
Olimex STM32-P207.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.

The following peripherals are enabled in this configuration.
 - LED:        Shows the system status

 - Button:     Built in app 'buttons' works.

 - ADC:        ADC1 samples ADC_IN1. Built in app 'adc' works.

 - USB-FS-OTG: The console is running on the virtual serial port. Note that you
               have to press enter three times until NSH appears.

 - CAN:        Built in app 'can' is enabled but not tested, since no CAN transceiver
               is on board.