nuttx

History

YAMAMOTO Takashi 58bdcbab9b Revert "Make: use gcc as LD"

This reverts commit 45672c269db13f59bdaa417e564837e8bbb6c8c1.

Because:

* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
  supposed to do when we use LD directly. It would be simpler to
  remove them from our LDFLAGS.

2021-09-08 09:40:48 +08:00

configs/nsh

sched/task: delete CONFIG_MAX_TASKS limit

2021-07-11 19:42:30 -07:00

include

Removes STM32_BOARD_HCLK from all board.h files. It is now unneccessary. Use STM32_HCLK_FREQUENCY instead.

2021-04-06 22:42:06 -05:00

scripts

Revert "Make: use gcc as LD"

2021-09-08 09:40:48 +08:00

src

Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL

2021-08-06 13:58:26 +02:00

Kconfig

Merged in alinjerpelea/nuttx (pull request #967 )

2019-08-07 20:49:39 +00:00

README.txt

Run codespell -w against all files

2020-02-22 14:45:07 -06:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-P207 is assembled mainly
from the configurations stm32f4discovery and stm3240g-eval.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

The following peripherals are enabled in this configuration.

 - LEDs:       show the system status

 - Buttons:    TAMPER-button, WKUP-button, J1-Joystick (consists of RIGHT-,
               UP-, LEFT-, DOWN-, and CENTER-button). Built in app
               'buttons' works.

 - ADC:        ADC1 samples the red trim potentiometer AN_TR
               Built in app 'adc' works.

 - USB-FS-OTG: Enabled but not really tested, since there is only a
               USB-A-connector (host) connected to the full speed STM32
               inputs.

 - USB-HS_OTG: The other connector (device) is connected to the high speed
               STM32 inputs (not enabled).

 - CAN:        Built in app 'can' works, but apart from that not really tested.

 - Ethernet:   Ping to other station on the network works.