sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
58d0c1f228
nuttx/net/sixlowpan/sixlowpan_send.c

328 lines
10 KiB
C
Raw Blame History

/****************************************************************************
* net/sixlowpan/sixlowpan_send.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <semaphore.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/clock.h>
#include <nuttx/semaphore.h>
#include <nuttx/net/net.h>
#include "netdev/netdev.h"
#include "devif/devif.h"
#include "sixlowpan/sixlowpan_internal.h"
#ifdef CONFIG_NET_6LOWPAN
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* These are temporary stubs. Something like this would be needed to
* monitor the health of a IPv6 neighbor.
*/
#define neighbor_reachable(dev)
#define neighbor_notreachable(dev)
/****************************************************************************
* Private Types
****************************************************************************/
/* This is the state data provided to the send interrupt logic. No actions
* can be taken until the until we receive the TX poll, then we can call
* sixlowpan_queue_frames() with this data strurcture.
*/
struct sixlowpan_send_s
{
FAR struct devif_callback_s *s_cb; /* Reference to callback instance */
sem_t s_waitsem; /* Supports waiting for driver events */
int s_result; /* The result of the transfer */
uint16_t s_timeout; /* Send timeout in deciseconds */
systime_t s_time; /* Last send time for determining timeout */
FAR const struct ipv6_hdr_s *s_ipv6hdr; /* IPv6 header, followed by UDP or TCP header. */
FAR const struct rimeaddr_s *s_destmac; /* Destination MAC address */
FAR const void *s_buf; /* Data to send */
size_t s_len; /* Length of data in buf */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Function: send_timeout
*
* Description:
* Check for send timeout.
*
* Input Parameters:
* sinfo - Send state structure reference
*
* Returned Value:
* TRUE:timeout FALSE:no timeout
*
* Assumptions:
* The network is locked
*
****************************************************************************/
static inline bool send_timeout(FAR struct sixlowpan_send_s *sinfo)
{
/* Check for a timeout. Zero means none and, in that case, we will let
* the send wait forever.
*/
if (sinfo->s_timeout != 0)
{
/* Check if the configured timeout has elapsed */
systime_t timeo_ticks = DSEC2TICK(sinfo->s_timeout);
systime_t elapsed = clock_systimer() - sinfo->s_time;
if (elapsed >= timeo_ticks)
{
return true;
}
}
/* No timeout */
return false;
}
/****************************************************************************
* Function: send_interrupt
*
* Description:
* This function is called from the interrupt level to perform the actual
* send operation when polled by the lower, device interfacing layer.
*
* Parameters:
* dev - The structure of the network driver that caused the interrupt
* conn - The connection structure associated with the socket
* flags - Set of events describing why the callback was invoked
*
* Returned Value:
* None
*
* Assumptions:
* The network is locked.
*
****************************************************************************/
static uint16_t send_interrupt(FAR struct net_driver_s *dev,
FAR void *pvconn,
FAR void *pvpriv, uint16_t flags)
{
FAR struct sixlowpan_send_s *sinfo = (FAR struct sixlowpan_send_s *)pvpriv;
ninfo("flags: %04x: %d\n", flags);
/* Check if the IEEE802.15.4 went down */
if ((flags & NETDEV_DOWN) != 0)
{
ninfo("Device is down\n");
sinfo->s_result = -ENOTCONN;
goto end_wait;
}
/* Check for a poll for TX data. */
if ((flags & WPAN_NEWDATA) == 0)
{
DEBUGASSERT((flags & WPAN_POLL) != 0);
/* Transfer the frame list to the IEEE802.15.4 MAC device */
sinfo->s_result =
sixlowpan_queue_frames((FAR struct ieee802154_driver_s *)dev,
sinfo->s_ipv6hdr, sinfo->s_buf, sinfo->s_len,
sinfo->s_destmac);
flags &= ~WPAN_POLL;
neighbor_reachable(dev);
goto end_wait;
}
/* Check for a timeout. */
if (send_timeout(sinfo))
{
/* Yes.. report the timeout */
nwarn("WARNING: SEND timeout\n");
sinfo->s_result = -ETIMEDOUT;
neighbor_notreachable(dev);
goto end_wait;
}
/* Continue waiting */
return flags;
end_wait:
/* Do not allow any further callbacks */
sinfo->s_cb->flags = 0;
sinfo->s_cb->priv = NULL;
sinfo->s_cb->event = NULL;
/* Wake up the waiting thread */
sem_post(&sinfo->s_waitsem);
return flags;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sixlowpan_send
*
* Description:
* Process an outgoing UDP or TCP packet. Takes an IP packet and formats
* it to be sent on an 802.15.4 network using 6lowpan. Called from common
* UDP/TCP send logic.
*
* The payload data is in the caller 'buf' and is of length 'len'.
* Compressed headers will be added and if necessary the packet is
* fragmented. The resulting packet/fragments are put in ieee->i_framelist
* and the entire list of frames will be delivered to the 802.15.4 MAC via
* ieee->i_framelist.
*
* Input Parameters:
* dev - The IEEE802.15.4 MAC network driver interface.
* list - Head of callback list for send interrupt
* ipv6hdr - IPv6 header followed by TCP or UDP header.
* buf - Data to send
* len - Length of data to send
* destmac - The IEEE802.15.4 MAC address of the destination
* timeout - Send timeout in deciseconds
*
* Returned Value:
* Ok is returned on success; Othewise a negated errno value is returned.
* This function is expected to fail if the driver is not an IEEE802.15.4
* MAC network driver. In that case, the UDP/TCP will fall back to normal
* IPv4/IPv6 formatting.
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
int sixlowpan_send(FAR struct net_driver_s *dev,
FAR struct devif_callback_s **list,
FAR const struct ipv6_hdr_s *ipv6hdr, FAR const void *buf,
size_t len, FAR const struct rimeaddr_s *destmac,
uint16_t timeout)
{
struct sixlowpan_send_s sinfo;
/* Initialize the send state structure */
sem_init(&sinfo.s_waitsem, 0, 0);
(void)sem_setprotocol(&sinfo.s_waitsem, SEM_PRIO_NONE);
sinfo.s_result = -EBUSY;
sinfo.s_timeout = timeout;
sinfo.s_time = clock_systimer();
sinfo.s_ipv6hdr = ipv6hdr;
sinfo.s_destmac = destmac;
sinfo.s_buf = buf;
sinfo.s_len = len;
net_lock();
if (len > 0)
{
/* Allocate resources to receive a callback.
*
* The second parameter is NULL meaning that we can get only
* device related events, no connect-related events.
*/
sinfo.s_cb = devif_callback_alloc(dev, list);
if (sinfo.s_cb != NULL)
{
int ret;
/* Set up the callback in the connection */
sinfo.s_cb->flags = (NETDEV_DOWN | WPAN_POLL);
sinfo.s_cb->priv = (FAR void *)&sinfo;
sinfo.s_cb->event = send_interrupt;
/* Notify the the IEEE802.15.4 MAC that we have data to send. */
netdev_txnotify_dev(dev);
/* Wait for the send to complete or an error to occur: NOTES: (1)
* net_lockedwait will also terminate if a signal is received, (2) interrupts
* may be disabled! They will be re-enabled while the task sleeps and
* automatically re-enabled when the task restarts.
*/
ret = net_lockedwait(&sinfo.s_waitsem);
if (ret < 0)
{
sinfo.s_result = -get_errno();
}
/* Make sure that no further interrupts are processed */
devif_conn_callback_free(dev, sinfo.s_cb, list);
}
}
sem_destroy(&sinfo.s_waitsem);
net_unlock();
return (sinfo.s_result < 0 ? sinfo.s_result : len);
}
#endif /* CONFIG_NET_6LOWPAN */
Reference in New Issue View Git Blame Copy Permalink