Masayuki Ishikawa dacd041a94 Merged in masayuki2009/nuttx.nuttx/fix_serial_driver_for_smp (pull request #1052) ...

drivers: serial: Fix data corruption when outputting data in SMP mode

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>

2019-10-16 13:09:03 +00:00

..

Kconfig

We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces

2019-10-11 23:36:57 +08:00

Kconfig-16550

Squashed commit of the following:

2018-08-26 11:37:16 -06:00

Kconfig-lpuart

This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.

2019-05-30 13:45:36 -06:00

Kconfig-sci

We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces

2019-10-11 23:36:57 +08:00

Kconfig-uart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-usart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

lowconsole.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

Make.defs

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

ptmx.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.h

PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt()

2016-07-15 09:39:33 -06:00

serial_dma.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

serial_io.c

Merged in masayuki2009/nuttx.nuttx/fix_serial_driver_for_smp (pull request #1052)

2019-10-16 13:09:03 +00:00

serial.c

Merged in masayuki2009/nuttx.nuttx/fix_serial_driver_for_smp (pull request #1052)

2019-10-16 13:09:03 +00:00

tcdrain.c

Make sure that labeling is used consistently in all function headers (part 2).

2018-02-01 12:03:55 -06:00

uart_16550.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00