201 lines
6.8 KiB
Plaintext
201 lines
6.8 KiB
Plaintext
/****************************************************************************
|
|
* configs/nucleo-h743zi/scripts/flash.ld
|
|
*
|
|
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/* The STM32H743ZI has 2048Kb of main FLASH memory. The flash memory is
|
|
* partitioned into a User Flash memory and a System Flash memory. Each
|
|
* of these memories has two banks:
|
|
*
|
|
* 1) User Flash memory:
|
|
*
|
|
* Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
|
|
* Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
|
|
*
|
|
* 2) System Flash memory:
|
|
*
|
|
* Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
|
|
* Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
|
|
*
|
|
* 3) User option bytes for user configuration, only in Bank 1.
|
|
*
|
|
* In the STM32H743ZI, two different boot spaces can be selected through
|
|
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
|
|
* BOOT_ADD1 option bytes:
|
|
*
|
|
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
|
|
* ST programmed value: Flash memory at 0x0800:0000
|
|
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
|
|
* ST programmed value: System bootloader at 0x1FF0:0000
|
|
*
|
|
* TODO: Check next paragraph with nucleo schematics
|
|
*
|
|
* NuttX does not modify these option bytes. On the unmodified NUCLEO-H743ZI
|
|
* board, the BOOT0 pin is at ground so by default, the STM32 will boot
|
|
* to address 0x0800:0000 in FLASH.
|
|
*
|
|
* The STM32H743ZI also has 1024Kb of data SRAM.
|
|
* SRAM is split up into several blocks and into three power domains:
|
|
*
|
|
* 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
|
|
* 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
|
|
*
|
|
* 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
|
|
*
|
|
* The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
|
|
* DTCM ports. The DTCM-RAM could be used for critical real-time
|
|
* data, such as interrupt service routines or stack / heap memory.
|
|
* Both DTCM-RAMs can be used in parallel (for load/store operations)
|
|
* thanks to the Cortex-M7 dual issue capability.
|
|
*
|
|
* 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000
|
|
*
|
|
* This RAM is connected to ITCM 64-bit interface designed for
|
|
* execution of critical real-times routines by the CPU.
|
|
*
|
|
* 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
|
|
* through D1 domain AXI bus matrix
|
|
*
|
|
* 2.1) 512Kb of SRAM beginning at address 0x2400:0000
|
|
*
|
|
* 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
|
|
* through D2 domain AHB bus matrix
|
|
*
|
|
* 3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
|
|
* 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
|
|
* 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000
|
|
*
|
|
* SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
|
|
*
|
|
* 4) AHB SRAM (D3 domain) accessible by most of system masters
|
|
* through D3 domain AHB bus matrix
|
|
*
|
|
* 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000
|
|
* 4.1) 4Kb of backup RAM beginning at address 0x3880:0000
|
|
*
|
|
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
|
* where the code expects to begin execution by jumping to the entry point in
|
|
* the 0x0800:0000 address range.
|
|
*/
|
|
|
|
MEMORY
|
|
{
|
|
itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K
|
|
flash (rx) : ORIGIN = 0x08000000, LENGTH = 2048K
|
|
dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
|
dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH = 64K
|
|
sram (rwx) : ORIGIN = 0x24000000, LENGTH = 512K
|
|
sram1 (rwx) : ORIGIN = 0x30000000, LENGTH = 128K
|
|
sram2 (rwx) : ORIGIN = 0x30020000, LENGTH = 128K
|
|
sram3 (rwx) : ORIGIN = 0x30040000, LENGTH = 32K
|
|
sram4 (rwx) : ORIGIN = 0x38000000, LENGTH = 64K
|
|
bbram (rwx) : ORIGIN = 0x38800000, LENGTH = 4K
|
|
}
|
|
|
|
OUTPUT_ARCH(arm)
|
|
EXTERN(_vectors)
|
|
ENTRY(_stext)
|
|
SECTIONS
|
|
{
|
|
.text :
|
|
{
|
|
_stext = ABSOLUTE(.);
|
|
*(.vectors)
|
|
*(.text .text.*)
|
|
*(.fixup)
|
|
*(.gnu.warning)
|
|
*(.rodata .rodata.*)
|
|
*(.gnu.linkonce.t.*)
|
|
*(.glue_7)
|
|
*(.glue_7t)
|
|
*(.got)
|
|
*(.gcc_except_table)
|
|
*(.gnu.linkonce.r.*)
|
|
_etext = ABSOLUTE(.);
|
|
} > flash
|
|
|
|
.init_section :
|
|
{
|
|
_sinit = ABSOLUTE(.);
|
|
*(.init_array .init_array.*)
|
|
_einit = ABSOLUTE(.);
|
|
} > flash
|
|
|
|
.ARM.extab :
|
|
{
|
|
*(.ARM.extab*)
|
|
} > flash
|
|
|
|
__exidx_start = ABSOLUTE(.);
|
|
.ARM.exidx :
|
|
{
|
|
*(.ARM.exidx*)
|
|
} > flash
|
|
__exidx_end = ABSOLUTE(.);
|
|
|
|
_eronly = ABSOLUTE(.);
|
|
|
|
.data :
|
|
{
|
|
_sdata = ABSOLUTE(.);
|
|
*(.data .data.*)
|
|
*(.gnu.linkonce.d.*)
|
|
CONSTRUCTORS
|
|
_edata = ABSOLUTE(.);
|
|
} > sram AT > flash
|
|
|
|
.bss :
|
|
{
|
|
_sbss = ABSOLUTE(.);
|
|
*(.bss .bss.*)
|
|
*(.gnu.linkonce.b.*)
|
|
*(COMMON)
|
|
_ebss = ABSOLUTE(.);
|
|
} > sram
|
|
|
|
/* Stabs debugging sections. */
|
|
|
|
.stab 0 : { *(.stab) }
|
|
.stabstr 0 : { *(.stabstr) }
|
|
.stab.excl 0 : { *(.stab.excl) }
|
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
|
.stab.index 0 : { *(.stab.index) }
|
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
|
.comment 0 : { *(.comment) }
|
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
|
.debug_info 0 : { *(.debug_info) }
|
|
.debug_line 0 : { *(.debug_line) }
|
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
|
.debug_aranges 0 : { *(.debug_aranges) }
|
|
}
|