198 lines
7.5 KiB
C
198 lines
7.5 KiB
C
/************************************************************************************
|
|
* configs/twr-k64f120m/include/board.h
|
|
*
|
|
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_TWR_K64F120M_INCLUDE_BOARCH_H
|
|
#define __CONFIGS_TWR_K64F120M_INCLUDE_BOARCH_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
/* The K64 tower board uses a 50MHz external clock */
|
|
|
|
#define BOARD_EXTCLOCK 1 /* External clock */
|
|
#define BOARD_EXTAL_FREQ 50000000 /* 50MHz Oscillator */
|
|
#define BOARD_XTAL32_FREQ 32768 /* 32KHz RTC Oscillator */
|
|
|
|
/* PLL Configuration. Either the external clock or crystal frequency is used to
|
|
* select the PRDIV value. Only reference clock frequencies are supported that will
|
|
* produce a range 2MHz-4MHz reference clock to the PLL.
|
|
*
|
|
* PLL Input frequency: PLLIN = REFCLK/PRDIV = 50MHz/20 = 2.5 MHz
|
|
* PLL Output frequency: PLLOUT = PLLIN*VDIV = 2.5Mhz*48 = 120MHz
|
|
* MCG Frequency: PLLOUT = 120 Mhz
|
|
*/
|
|
|
|
#define BOARD_PRDIV 20 /* PLL External Reference Divider */
|
|
#define BOARD_VDIV 48 /* PLL VCO Divider (frequency multiplier) */
|
|
|
|
#define BOARD_PLLIN_FREQ (BOARD_EXTAL_FREQ / BOARD_PRDIV)
|
|
#define BOARD_PLLOUT_FREQ (BOARD_PLLIN_FREQ * BOARD_VDIV)
|
|
#define BOARD_MCG_FREQ BOARD_PLLOUT_FREQ
|
|
|
|
/* Define additional MCG_C2 Setting */
|
|
|
|
#define BOARD_MCG_C2_FCFTRIM 0 /* Do not enable FCFTRIM */
|
|
#define BOARD_MCG_C2_LOCRE0 MCG_C2_LOCRE0 /* Enable reset on loss of clock */
|
|
|
|
/* SIM CLKDIV1 dividers */
|
|
|
|
#define BOARD_OUTDIV1 1 /* Core = MCG, 120MHz */
|
|
#define BOARD_OUTDIV2 2 /* Bus = MCG/2, 60MHz */
|
|
#define BOARD_OUTDIV3 2 /* FlexBus = MCG/2, 60MHz */
|
|
#define BOARD_OUTDIV4 5 /* Flash clock = MCG/5, 24MHz */
|
|
|
|
#define BOARD_CORECLK_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV1)
|
|
#define BOARD_BUS_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV2)
|
|
#define BOARD_FLEXBUS_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV3)
|
|
#define BOARD_FLASHCLK_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV4)
|
|
|
|
/* SDHC clocking ********************************************************************/
|
|
|
|
/* SDCLK configurations corresponding to various modes of operation. Formula is:
|
|
*
|
|
* SDCLK frequency = (base clock) / (prescaler * divisor)
|
|
*
|
|
* The SDHC module is always configure configured so that the core clock is the base
|
|
* clock.
|
|
*/
|
|
|
|
/* Identification mode: 375KHz = 120MHz / ( 64 * 5) <= 400 KHz */
|
|
|
|
#define BOARD_SDHC_IDMODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV64
|
|
#define BOARD_SDHC_IDMODE_DIVISOR SDHC_SYSCTL_DVS_DIV(5)
|
|
|
|
/* MMC normal mode: 15MHz = 120MHz / (8 * 1) <= 16 MHz*/
|
|
|
|
#define BOARD_SDHC_MMCMODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV8
|
|
#define BOARD_SDHC_MMCMODE_DIVISOR SDHC_SYSCTL_DVS_DIV(1)
|
|
|
|
/* SD normal mode (1-bit): 15MHz = 120MHz / (8 * 1) <= 16 MHz*/
|
|
|
|
#define BOARD_SDHC_SD1MODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV8
|
|
#define BOARD_SDHC_SD1MODE_DIVISOR SDHC_SYSCTL_DVS_DIV(1)
|
|
|
|
/* SD normal mode (4-bit): 20MHz = 120MHz / (2 * 3) (with DMA) <= 24MHz
|
|
* SD normal mode (4-bit): 15MHz = 120MHz / (8 * 1) (no DMA) <= 16MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define BOARD_SDHC_SD4MODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV2
|
|
# define BOARD_SDHC_SD4MODE_DIVISOR SDHC_SYSCTL_DVS_DIV(3)
|
|
#else
|
|
# define BOARD_SDHC_SD4MODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV8
|
|
# define BOARD_SDHC_SD4MODE_DIVISOR SDHC_SYSCTL_DVS_DIV(1)
|
|
#endif
|
|
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* The TWR-K64F120M has four LEDs:
|
|
*
|
|
* 1. D5 / Green LED PTE6
|
|
* 2. D6 / Yellow LED PTE7
|
|
* 3. D7 / Orange LED PTE8
|
|
* 4 D9 / Blue LED PTE9
|
|
*
|
|
* LED4 is reservered for user.
|
|
* The 3 first LEDs are encoded as follows:
|
|
*/
|
|
|
|
#define LED_STARTED 0 /* N/A */
|
|
#define LED_HEAPALLOCATE 1 /* N/A */
|
|
#define LED_IRQSENABLED 2 /* N/A */
|
|
#define LED_STACKCREATED 3 /* LED1 - OS is started */
|
|
#define LED_INIRQ 4 /* LED2 */
|
|
#define LED_SIGNAL 5 /* LED3 */
|
|
#define LED_ASSERTION 6 /* LED1 + LED2 + LED3 */
|
|
#define LED_PANIC 7 /* LED1 (blink) */
|
|
|
|
|
|
/* Open SDA serial link */
|
|
#define PIN_UART1_RX PIN_UART1_RX_1
|
|
#define PIN_UART1_TX PIN_UART1_TX_1
|
|
|
|
|
|
/* Ethernet */
|
|
#ifdef CONFIG_KINETIS_ENET
|
|
# define CONFIG_KINETIS_NENET 1
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C" {
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Function Prototypes
|
|
************************************************************************************/
|
|
/************************************************************************************
|
|
* Name: kinetis_boardinitialize
|
|
*
|
|
* Description:
|
|
* All STM32 architectures must provide the following entry point. This entry point
|
|
* is called early in the intitialization -- after all memory has been configured
|
|
* and mapped but before any devices have been initialized.
|
|
*
|
|
************************************************************************************/
|
|
|
|
void kinetis_boardinitialize(void);
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_TWR_K64F120M_INCLUDE_BOARCH_H */
|