409 lines
12 KiB
C
409 lines
12 KiB
C
/****************************************************************************
|
|
* drivers/sensors/mb7040.c
|
|
* Character driver for the MaxBotix MB7040 Sonar
|
|
*
|
|
* Copyright (C) 2015 Omni Hoverboards Inc. All rights reserved.
|
|
* Author: Paul Alexander Patience <paul-a.patience@polymtl.ca>
|
|
*
|
|
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <errno.h>
|
|
#include <debug.h>
|
|
#include <stdlib.h>
|
|
|
|
#include <nuttx/kmalloc.h>
|
|
#include <nuttx/fs/fs.h>
|
|
#include <nuttx/i2c/i2c_master.h>
|
|
#include <nuttx/sensors/mb7040.h>
|
|
#include <nuttx/random.h>
|
|
|
|
#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_MB7040)
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
#ifndef CONFIG_MB7040_I2C_FREQUENCY
|
|
# define CONFIG_MB7040_I2C_FREQUENCY 400000
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Private Types
|
|
****************************************************************************/
|
|
|
|
struct mb7040_dev_s
|
|
{
|
|
FAR struct i2c_master_s *i2c; /* I2C interface */
|
|
uint8_t addr; /* I2C address */
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Private Function Prototypes
|
|
****************************************************************************/
|
|
|
|
/* I2C Helpers */
|
|
|
|
static int mb7040_measurerange(FAR struct mb7040_dev_s *priv);
|
|
static int mb7040_readrange(FAR struct mb7040_dev_s *priv,
|
|
FAR uint16_t *range);
|
|
static int mb7040_changeaddr(FAR struct mb7040_dev_s *priv, uint8_t addr);
|
|
|
|
/* Character Driver Methods */
|
|
|
|
static int mb7040_open(FAR struct file *filep);
|
|
static int mb7040_close(FAR struct file *filep);
|
|
static ssize_t mb7040_read(FAR struct file *filep, FAR char *buffer,
|
|
size_t buflen);
|
|
static ssize_t mb7040_write(FAR struct file *filep, FAR const char *buffer,
|
|
size_t buflen);
|
|
static int mb7040_ioctl(FAR struct file *filep, int cmd,
|
|
unsigned long arg);
|
|
|
|
/****************************************************************************
|
|
* Private Data
|
|
****************************************************************************/
|
|
|
|
static const struct file_operations g_fops =
|
|
{
|
|
mb7040_open,
|
|
mb7040_close,
|
|
mb7040_read,
|
|
mb7040_write,
|
|
NULL,
|
|
mb7040_ioctl,
|
|
NULL
|
|
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
|
|
, NULL
|
|
#endif
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Private Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_measurerange
|
|
*
|
|
* Description:
|
|
* Command the device to measure the range.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mb7040_measurerange(FAR struct mb7040_dev_s *priv)
|
|
{
|
|
struct i2c_config_s config;
|
|
uint8_t regaddr;
|
|
int ret;
|
|
|
|
sninfo("addr: %02x\n", regaddr);
|
|
|
|
/* Set up the I2C configuration */
|
|
|
|
config.frequency = CONFIG_MB7040_I2C_FREQUENCY;
|
|
config.address = priv->addr;
|
|
config.addrlen = 7;
|
|
|
|
/* Write the register address */
|
|
|
|
regaddr = MB7040_RANGE_REG;
|
|
|
|
ret = i2c_write(priv->i2c, &config, ®addr, sizeof(regaddr));
|
|
if (ret < 0)
|
|
{
|
|
snerr("ERROR: i2c_write failed: %d\n", ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_readrange
|
|
*
|
|
* Description:
|
|
* Read the range last measured by the device. The units are centimeters.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mb7040_readrange(FAR struct mb7040_dev_s *priv,
|
|
FAR uint16_t *range)
|
|
{
|
|
struct i2c_config_s config;
|
|
uint8_t buffer[2];
|
|
int ret;
|
|
|
|
/* Set up the I2C configuration */
|
|
|
|
config.frequency = CONFIG_MB7040_I2C_FREQUENCY;
|
|
config.address = priv->addr;
|
|
config.addrlen = 7;
|
|
|
|
/* Read two bytes */
|
|
|
|
ret = i2c_read(priv->i2c, &config, buffer, sizeof(buffer));
|
|
if (ret < 0)
|
|
{
|
|
snerr("ERROR: i2c_read failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
*range = (uint16_t)buffer[0] << 8 | (uint16_t)buffer[1];
|
|
sninfo("range: %04x ret: %d\n", *range, ret);
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_changeaddr
|
|
*
|
|
* Description:
|
|
* Change the device's I2C address.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mb7040_changeaddr(FAR struct mb7040_dev_s *priv, uint8_t addr)
|
|
{
|
|
struct i2c_config_s config;
|
|
uint8_t buffer[3];
|
|
int ret;
|
|
|
|
sninfo("new addr: %02x\n", addr);
|
|
|
|
/* Sanity check */
|
|
|
|
DEBUGASSERT((addr & 1) == 0);
|
|
DEBUGASSERT(addr != 0x00 && addr != 0x50 && addr != 0xa4 && addr != 0xaa);
|
|
|
|
/* Set up a 3-byte message to send */
|
|
|
|
buffer[0] = MB7040_ADDRUNLOCK1_REG;
|
|
buffer[1] = MB7040_ADDRUNLOCK2_REG;
|
|
buffer[2] = addr;
|
|
|
|
/* Set up the I2C configuration */
|
|
|
|
config.frequency = CONFIG_MB7040_I2C_FREQUENCY;
|
|
config.address = priv->addr;
|
|
config.addrlen = 7;
|
|
|
|
/* Write the register address followed by the data (no RESTART) */
|
|
|
|
ret = i2c_write(priv->i2c, &config, buffer, sizeof(buffer));
|
|
if (ret < 0)
|
|
{
|
|
snerr("ERROR: i2c_write failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
priv->addr = addr;
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_open
|
|
*
|
|
* Description:
|
|
* This method is called when the device is opened.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mb7040_open(FAR struct file *filep)
|
|
{
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_close
|
|
*
|
|
* Description:
|
|
* This method is called when the device is closed.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mb7040_close(FAR struct file *filep)
|
|
{
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_read
|
|
*
|
|
* Description:
|
|
* A dummy read method.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static ssize_t mb7040_read(FAR struct file *filep, FAR char *buffer,
|
|
size_t buflen)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_write
|
|
*
|
|
* Description:
|
|
* A dummy write method.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static ssize_t mb7040_write(FAR struct file *filep, FAR const char *buffer,
|
|
size_t buflen)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_ioctl
|
|
*
|
|
* Description:
|
|
* The standard ioctl method.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int mb7040_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
|
|
{
|
|
FAR struct inode *inode = filep->f_inode;
|
|
FAR struct mb7040_dev_s *priv = inode->i_private;
|
|
int ret = OK;
|
|
|
|
/* Handle ioctl commands */
|
|
|
|
switch (cmd)
|
|
{
|
|
/* Command the device to measure the range. Arg: None. */
|
|
|
|
case SNIOC_MEASURE:
|
|
DEBUGASSERT(arg == 0);
|
|
ret = mb7040_measurerange(priv);
|
|
break;
|
|
|
|
/* Read the range last measured by the device. Arg: int32_t* pointer. */
|
|
|
|
case SNIOC_RANGE:
|
|
{
|
|
FAR int32_t *ptr = (FAR int32_t *)((uintptr_t)arg);
|
|
uint16_t range = 0;
|
|
DEBUGASSERT(ptr != NULL);
|
|
ret = mb7040_readrange(priv, &range);
|
|
if (ret == OK)
|
|
{
|
|
*ptr = (int32_t)range;
|
|
|
|
/* Feed sensor data to entropy pool */
|
|
|
|
add_sensor_randomness(range);
|
|
}
|
|
|
|
sninfo("range: %04x ret: %d\n", *ptr, ret);
|
|
}
|
|
break;
|
|
|
|
/* Change the device's I2C address. Arg: uint8_t value. */
|
|
|
|
case SNIOC_CHANGEADDR:
|
|
ret = mb7040_changeaddr(priv, (uint8_t)arg);
|
|
sninfo("new addr: %02x ret: %d\n", *(uint8_t *)arg, ret);
|
|
break;
|
|
|
|
/* Unrecognized commands */
|
|
|
|
default:
|
|
snerr("ERROR: Unrecognized cmd: %d arg: %ld\n", cmd, arg);
|
|
ret = -ENOTTY;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: mb7040_register
|
|
*
|
|
* Description:
|
|
* Register the MB7040 character device as 'devpath'.
|
|
*
|
|
* Input Parameters:
|
|
* devpath - The full path to the driver to register, e.g., "/dev/sonar0".
|
|
* i2c - An I2C driver instance.
|
|
* addr - The I2C address of the MB7040.
|
|
*
|
|
* Returned Value:
|
|
* Zero (OK) on success; a negated errno value on failure.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int mb7040_register(FAR const char *devpath, FAR struct i2c_master_s *i2c,
|
|
uint8_t addr)
|
|
{
|
|
FAR struct mb7040_dev_s *priv;
|
|
int ret;
|
|
|
|
/* Sanity check */
|
|
|
|
DEBUGASSERT(i2c != NULL);
|
|
|
|
/* Initialize the device's structure */
|
|
|
|
priv = (FAR struct mb7040_dev_s *)kmm_malloc(sizeof(*priv));
|
|
if (priv == NULL)
|
|
{
|
|
snerr("ERROR: Failed to allocate instance\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv->i2c = i2c;
|
|
priv->addr = addr;
|
|
|
|
/* Register the character driver */
|
|
|
|
ret = register_driver(devpath, &g_fops, 0666, priv);
|
|
if (ret < 0)
|
|
{
|
|
snerr("ERROR: Failed to register driver: %d\n", ret);
|
|
kmm_free(priv);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif /* CONFIG_I2C && CONFIG_SENSORS_MB7040 */
|