nuttx/arch/arm/src/lpc11xx/lpc11_spi.h

/************************************************************************************
 * arch/arm/src/lpc11xx/lpc11_spi.h
 *
 *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __ARCH_ARM_SRC_LPC11XX_LPC11_SPI_H
#define __ARCH_ARM_SRC_LPC11XX_LPC11_SPI_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>

#include <nuttx/spi/spi.h>

/************************************************************************************
 * Public Data
 ************************************************************************************/

#ifdef CONFIG_LPC11_SPI

#ifndef __ASSEMBLY__
#ifdef __cplusplus
extern "C"
{
#endif

/************************************************************************************
 * Public Functions
 ************************************************************************************/

/************************************************************************************
 * Name: lpc11_spibus_initialize
 *
 * Description:
 *   Initialize the selected SPI port.
 *
 * Input Parameters:
 *   Port number (for hardware that has mutiple SPI interfaces)
 *
 * Returned Value:
 *   Valid SPI device structure reference on succcess; a NULL on failure
 *
 ************************************************************************************/

FAR struct spi_dev_s *lpc11_spibus_initialize(int port);

/************************************************************************************
 * Name:  lpc11_spiselect, lpc11_status, and lpc11_spicmddata
 *
 * Description:
 *   These external functions must be provided by board-specific logic.  They are
 *   implementations of the select, status, and cmddata methods of the SPI interface
 *   defined by struct spi_ops_s (see include/nuttx/spi/spi.h). All other methods
 *   including lpc11_spibus_initialize()) are provided by common LPC11xx logic.  To use
 *   this common SPI logic on your board:
 *
 *   1. Provide logic in lpc11_boardinitialize() to configure SPI chip select pins.
 *   2. Provide lpc11_spiselect() and lpc11_spistatus() functions in your board-
 *      specific logic.  These functions will perform chip selection and status
 *      operations using GPIOs in the way your board is configured.
 *   2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
 *      lpc11_spicmddata() functions in your board-specific logic.  This function
 *      will perform cmd/data selection operations using GPIOs in the way your
 *      board is configured.
 *   3. Add a call to lpc11_spibus_initialize() in your low level application
 *      initialization logic
 *   4. The handle returned by lpc11_spibus_initialize() may then be used to bind the
 *      SPI driver to higher level logic (e.g., calling  mmcsd_spislotinitialize(),
 *      for example, will bind the SPI driver to the SPI MMC/SD driver).
 *
 ************************************************************************************/

void lpc11_spiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected);
uint8_t lpc11_spistatus(FAR struct spi_dev_s *dev, uint32_t devid);
#ifdef CONFIG_SPI_CMDDATA
int lpc11_spicmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd);
#endif

/************************************************************************************
 * Name: spi_flush
 *
 * Description:
 *   Flush and discard any words left in the RX fifo.  This can be called
 *   from spiselect after a device is deselected (if you worry about such
 *   things).
 *
 * Input Parameters:
 *   dev - Device-specific state data
 *
 * Returned Value:
 *   None
 *
 ************************************************************************************/

void spi_flush(FAR struct spi_dev_s *dev);

/************************************************************************************
 * Name: lpc11_spiregister
 *
 * Description:
 *   If the board supports a card detect callback to inform the SPI-based
 *   MMC/SD drvier when an SD card is inserted or removed, then
 *   CONFIG_SPI_CALLBACK should be defined and the following function must
 *   must be implemented.  These functions implements the registercallback
 *   method of the SPI interface (see include/nuttx/spi/spi.h for details)
 *
 * Input Parameters:
 *   dev -      Device-specific state data
 *   callback - The funtion to call on the media change
 *   arg -      A caller provided value to return with the callback
 *
 * Returned Value:
 *   0 on success; negated errno on failure.
 *
 ************************************************************************************/

#ifdef CONFIG_SPI_CALLBACK
int lpc11_spiregister(FAR struct spi_dev_s *dev, spi_mediachange_t callback,
                     FAR void *arg);
#endif

#if defined(__cplusplus)
}
#endif

#endif /* __ASSEMBLY__ */
#endif /* CONFIG_LPC11_SPI */
#endif /* __ARCH_ARM_SRC_LPC11XX_LPC11_SPI_H */