Gregory Nutt 9ed7d56a18 Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE

2016-02-04 12:14:17 -06:00

..

Makefile

Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE

2016-02-04 12:14:17 -06:00

sam_appinit.c

Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE

2016-02-04 12:14:17 -06:00

sam_at24config.c

Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming

2016-02-02 12:25:14 -06:00

sam_autoleds.c

SAME70-Xplained: Has only a single LED and a single push button

2015-11-18 16:45:29 -06:00

sam_boot.c

Port logic to enable PCK6 in tickless mode from the samv71-xult to the same70-xplained

2015-12-04 12:37:00 -06:00

sam_bringup.c

I2C Tool: Now that the I2C tool uses a character driver, the I2C character drivers must be initialized in board bring-up logic

2016-02-02 14:22:54 -06:00

sam_buttons.c

SAME70-Xplained: Has only a single LED and a single push button

2015-11-18 16:45:29 -06:00

sam_ethernet.c

Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming

2016-02-02 12:25:14 -06:00

sam_hsmci.c

configs/same70-xplained/nsh: The NSH configuration now appears to be fully functional

2015-11-30 16:05:32 -06:00

sam_mcan.c

Add basic support for the SAME70-Xplained board

2015-11-18 13:54:57 -06:00

sam_sdram.c

Add basic support for the SAME70-Xplained board

2015-11-18 13:54:57 -06:00

sam_spi.c

For SAM MCUs, rename up_spiinitialize to sam_spibus_initialize

2016-01-26 13:03:12 -06:00

sam_usbdev.c

Add basic support for the SAME70-Xplained board

2015-11-18 13:54:57 -06:00

sam_userleds.c

SAME70-Xplained: Has only a single LED and a single push button

2015-11-18 16:45:29 -06:00

same70-xplained.h

Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE

2016-02-04 12:14:17 -06:00