9906163beb
Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>
Co-authored-by: David Sidrane <david.sidrane@nscdg.com>
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
imxrt:Kconfig fix formatting
imxrt:usbphy move IMXRT_USBPHY{1|[2]}_BASE to memory map
imxrt:lpspi Fix build breakage from adding 1170
imxrt:Finish 1170 iomux and clockconfig versioning
imxrt:Remove duplicate imxrt_clock{off|all}_lpi2c4
imxrt:pmu remove duplicate dcd non 117x header
imxrt:lpspi Fix unused var warnings
imxrt:lpi2c Fix unused var warnings
imxrt:lowputs Fix unused var warnings
imxrt:imxrt117x_dmamux fix duplicate entries
imxtr:serial Use IOMUX_PULL_{UP|DOWN} and map IOMUX V1 to them
imxrt:MPU Support the 1170
imxrt:dmamux Alias IMXRT_DMAMUX0_BASE as IMXRT_DMAMUX_BASE
imx1170:ccm Alias CCM_CCGR_DMA & CCM_CCGR_SNVS_LP for compatiblity
Author: Peter van der Perk <peter.vanderperk@nxp.com>
IMXRT7 Add LPUART 9/10/11/12 support
Author: David Sidrane <david.sidrane@nscdg.com>
imxrt:1170pinmux Add QTIMER pins
imxrt:1170pinmux Add GPT pins
imxrt:1170pinmux Add FLEXPWM pins
imxrt1170:pinmap Add GPIO_ENET_1G pinning
imxrt:enet Support ENET_1G
imxrt:periphclks rt1170 does not have canX_serial clock
imxrt:flexcan:Layer imxrt_ioctl
imxrt117x:memorymap added CAN3
imxrt:ADC support ver1 and ver2 for imxrt117x
imxrt:imxrt117x_ccm Align timer naming with other imxrt QTIMERn->TIMERn
imxrt:imxrt117x_ccm align CCM names with rt106x
imxrt:XBAR support larger number of selects needed on imxrt1170
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
FlexSPI AHB Region support, PIT rename for compatiblity
imxrt:USB Analog add VBUS_VALID_3V
FlexSPI expand prefetch registers for IMXRT117X
imxrt:Support Initialization of FlexRam without Running from OCRAM
imxrt: ocotp add UNIQUE_ID register definition
imxrt: enet use ocotp unique_id
imxrt: enet fixes for imxrt117x
imxrt: ethernet pinmux sion enable
imxrt:imxrt_periphclk_configure add memory sync
Flush the pipeline to prevent bus faults, by insuring a
peripheral is clocked before being accessed on return from
this function.
imxrt:Restructure gpioN to padmux mapping
imxrt:Add imxrt1170 daisy
imxrt: correct power modes for imxrt117x fixing hang on WFI
imxrt: imxrt117x TCM MPU config
imxrt: FlexRAM clocking DIV0 setup
imxrt: 117x periphclocks wait for status bit
imxrt: iomucx set pad settings correctly and allow reconfiguration
imxrt: enet align buffers 64-byte for optimal performance
Add DSC barriers for write-through cache support
imxrt: imxrt1170 use FlexCAN FD/ECC features
imxrt:iomuxc_ver2 (117x) SD_B1 and DISP_B1 use PULL feild not PUE/PUS
imxrt:Fix 1170 SNVS addressing
imxrt: enet set mii clock after ifdown so that phy keep working
nxstyle fixes
imxrt: preprocessor and include fixes
Fix configs
imxrt1170-evk clean defconfig
77 lines
1.9 KiB
Plaintext
77 lines
1.9 KiB
Plaintext
#
|
|
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
|
#
|
|
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
|
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
|
# modifications.
|
|
#
|
|
# CONFIG_NET_CAN_CANFD is not set
|
|
# CONFIG_NET_ETHERNET is not set
|
|
# CONFIG_NET_IPv4 is not set
|
|
CONFIG_ALLOW_GPL_COMPONENTS=y
|
|
CONFIG_ARCH="arm"
|
|
CONFIG_ARCH_BOARD="imxrt1170-evk"
|
|
CONFIG_ARCH_BOARD_IMXRT1170_EVK=y
|
|
CONFIG_ARCH_CHIP="imxrt"
|
|
CONFIG_ARCH_CHIP_IMXRT=y
|
|
CONFIG_ARCH_CHIP_MIMXRT1176DVMAA=y
|
|
CONFIG_ARCH_INTERRUPTSTACK=900
|
|
CONFIG_ARCH_STACKDUMP=y
|
|
CONFIG_ARMV7M_DCACHE=y
|
|
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
|
CONFIG_ARMV7M_ICACHE=y
|
|
CONFIG_ARMV7M_ITCM=y
|
|
CONFIG_ARMV7M_USEBASEPRI=y
|
|
CONFIG_BOARD_LOOPSPERMSEC=104926
|
|
CONFIG_BUILTIN=y
|
|
CONFIG_CAN=y
|
|
CONFIG_CANUTILS_CANDUMP=y
|
|
CONFIG_CANUTILS_CANSEND=y
|
|
CONFIG_DEBUG_BINFMT=y
|
|
CONFIG_DEBUG_BINFMT_ERROR=y
|
|
CONFIG_DEBUG_BINFMT_INFO=y
|
|
CONFIG_DEBUG_BINFMT_WARN=y
|
|
CONFIG_DEBUG_CAN=y
|
|
CONFIG_DEBUG_CAN_ERROR=y
|
|
CONFIG_DEBUG_CAN_INFO=y
|
|
CONFIG_DEBUG_CAN_WARN=y
|
|
CONFIG_DEBUG_FEATURES=y
|
|
CONFIG_DEBUG_FULLOPT=y
|
|
CONFIG_DEBUG_IRQ=y
|
|
CONFIG_DEBUG_IRQ_ERROR=y
|
|
CONFIG_DEBUG_IRQ_INFO=y
|
|
CONFIG_DEBUG_IRQ_WARN=y
|
|
CONFIG_DEBUG_NET=y
|
|
CONFIG_DEBUG_NET_ERROR=y
|
|
CONFIG_DEBUG_NET_INFO=y
|
|
CONFIG_DEBUG_NET_WARN=y
|
|
CONFIG_DEBUG_SYMBOLS=y
|
|
CONFIG_FS_PROCFS=y
|
|
CONFIG_IDLETHREAD_STACKSIZE=2048
|
|
CONFIG_IMXRT_FLEXCAN3=y
|
|
CONFIG_IMXRT_LPUART1=y
|
|
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
|
CONFIG_INTELHEX_BINARY=y
|
|
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
|
CONFIG_NET=y
|
|
CONFIG_NETDEV_IFINDEX=y
|
|
CONFIG_NETDEV_LATEINIT=y
|
|
CONFIG_NETDEV_STATISTICS=y
|
|
CONFIG_NET_CAN=y
|
|
CONFIG_NET_CAN_NOTIFIER=y
|
|
CONFIG_NET_SOCKOPTS=y
|
|
CONFIG_NET_STATISTICS=y
|
|
CONFIG_NET_TIMESTAMP=y
|
|
CONFIG_NSH_ARCHINIT=y
|
|
CONFIG_NSH_BUILTIN_APPS=y
|
|
CONFIG_NSH_FILEIOSIZE=512
|
|
CONFIG_NSH_LINELEN=64
|
|
CONFIG_NSH_READLINE=y
|
|
CONFIG_RAM_SIZE=524288
|
|
CONFIG_RAM_START=0x20240000
|
|
CONFIG_SCHED_HPWORK=y
|
|
CONFIG_SIG_DEFAULT=y
|
|
CONFIG_START_DAY=14
|
|
CONFIG_START_MONTH=3
|
|
CONFIG_SYSTEM_NSH=y
|